Detroit rear, or Lockright F&B?
07-02-2004, 09:06 AM
#1
Guest
Posts: n/a
Detroit rear, or Lockright F&B?
If you had a choice, would you go with the detroit locker in rear only, or
go with lockright front and back. Given that 2 lockrights are about $150.00
Canadian less then the detroit. I'm changing gears, so now is the time to do
something, so the install cost of the detroit wont come into it. Decisions,
decisions.
This is in an 81 CJ7, dana 30 front, AMC 20 rear with one peice axles.
go with lockright front and back. Given that 2 lockrights are about $150.00
Canadian less then the detroit. I'm changing gears, so now is the time to do
something, so the install cost of the detroit wont come into it. Decisions,
decisions.
This is in an 81 CJ7, dana 30 front, AMC 20 rear with one peice axles.
07-02-2004, 11:56 AM
#2
Guest
Posts: n/a
Re: Detroit rear, or Lockright F&B?
>would you go with the detroit locker in rear only, or
>go with lockright front and back.
>This is in an 81 CJ7, dana 30 front, AMC 20 rear with one peice axles.
Here is my setup: Dana 30 front with "Dana 44 sized" Warn chromoly axles,
6-bolt hubs, 4.56 gears and Lockright. Rear is an AMC 20 with Summers Bros.
1-piece axles, welded tubes, and Detroit.
I have tried "lunchbox" lockers in the rear, and have broken them. The Detroit
is nearly bulletproof. In my opinion (and in my experience), it makes more
sense to get the best the first time even though it costs more. Buying a
cheaper rear locker to save a few bucks now may (and probably will) cost more
in the long run. If you can't afford a Detroit and a front locker now, get the
Detroit and do the front later.
Robert Bills
KG6LMV
Orange County CA
http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
http://www.RobertBills.com
>go with lockright front and back.
>This is in an 81 CJ7, dana 30 front, AMC 20 rear with one peice axles.
Here is my setup: Dana 30 front with "Dana 44 sized" Warn chromoly axles,
6-bolt hubs, 4.56 gears and Lockright. Rear is an AMC 20 with Summers Bros.
1-piece axles, welded tubes, and Detroit.
I have tried "lunchbox" lockers in the rear, and have broken them. The Detroit
is nearly bulletproof. In my opinion (and in my experience), it makes more
sense to get the best the first time even though it costs more. Buying a
cheaper rear locker to save a few bucks now may (and probably will) cost more
in the long run. If you can't afford a Detroit and a front locker now, get the
Detroit and do the front later.
Robert Bills
KG6LMV
Orange County CA
http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
http://www.RobertBills.com
07-02-2004, 11:56 AM
#3
Guest
Posts: n/a
Re: Detroit rear, or Lockright F&B?
>would you go with the detroit locker in rear only, or
>go with lockright front and back.
>This is in an 81 CJ7, dana 30 front, AMC 20 rear with one peice axles.
Here is my setup: Dana 30 front with "Dana 44 sized" Warn chromoly axles,
6-bolt hubs, 4.56 gears and Lockright. Rear is an AMC 20 with Summers Bros.
1-piece axles, welded tubes, and Detroit.
I have tried "lunchbox" lockers in the rear, and have broken them. The Detroit
is nearly bulletproof. In my opinion (and in my experience), it makes more
sense to get the best the first time even though it costs more. Buying a
cheaper rear locker to save a few bucks now may (and probably will) cost more
in the long run. If you can't afford a Detroit and a front locker now, get the
Detroit and do the front later.
Robert Bills
KG6LMV
Orange County CA
http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
http://www.RobertBills.com
>go with lockright front and back.
>This is in an 81 CJ7, dana 30 front, AMC 20 rear with one peice axles.
Here is my setup: Dana 30 front with "Dana 44 sized" Warn chromoly axles,
6-bolt hubs, 4.56 gears and Lockright. Rear is an AMC 20 with Summers Bros.
1-piece axles, welded tubes, and Detroit.
I have tried "lunchbox" lockers in the rear, and have broken them. The Detroit
is nearly bulletproof. In my opinion (and in my experience), it makes more
sense to get the best the first time even though it costs more. Buying a
cheaper rear locker to save a few bucks now may (and probably will) cost more
in the long run. If you can't afford a Detroit and a front locker now, get the
Detroit and do the front later.
Robert Bills
KG6LMV
Orange County CA
http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
http://www.RobertBills.com
07-02-2004, 11:56 AM
#4
Guest
Posts: n/a
Re: Detroit rear, or Lockright F&B?
>would you go with the detroit locker in rear only, or
>go with lockright front and back.
>This is in an 81 CJ7, dana 30 front, AMC 20 rear with one peice axles.
Here is my setup: Dana 30 front with "Dana 44 sized" Warn chromoly axles,
6-bolt hubs, 4.56 gears and Lockright. Rear is an AMC 20 with Summers Bros.
1-piece axles, welded tubes, and Detroit.
I have tried "lunchbox" lockers in the rear, and have broken them. The Detroit
is nearly bulletproof. In my opinion (and in my experience), it makes more
sense to get the best the first time even though it costs more. Buying a
cheaper rear locker to save a few bucks now may (and probably will) cost more
in the long run. If you can't afford a Detroit and a front locker now, get the
Detroit and do the front later.
Robert Bills
KG6LMV
Orange County CA
http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
http://www.RobertBills.com
>go with lockright front and back.
>This is in an 81 CJ7, dana 30 front, AMC 20 rear with one peice axles.
Here is my setup: Dana 30 front with "Dana 44 sized" Warn chromoly axles,
6-bolt hubs, 4.56 gears and Lockright. Rear is an AMC 20 with Summers Bros.
1-piece axles, welded tubes, and Detroit.
I have tried "lunchbox" lockers in the rear, and have broken them. The Detroit
is nearly bulletproof. In my opinion (and in my experience), it makes more
sense to get the best the first time even though it costs more. Buying a
cheaper rear locker to save a few bucks now may (and probably will) cost more
in the long run. If you can't afford a Detroit and a front locker now, get the
Detroit and do the front later.
Robert Bills
KG6LMV
Orange County CA
http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
http://www.RobertBills.com
07-02-2004, 11:56 AM
#5
Guest
Posts: n/a
Re: Detroit rear, or Lockright F&B?
>would you go with the detroit locker in rear only, or
>go with lockright front and back.
>This is in an 81 CJ7, dana 30 front, AMC 20 rear with one peice axles.
Here is my setup: Dana 30 front with "Dana 44 sized" Warn chromoly axles,
6-bolt hubs, 4.56 gears and Lockright. Rear is an AMC 20 with Summers Bros.
1-piece axles, welded tubes, and Detroit.
I have tried "lunchbox" lockers in the rear, and have broken them. The Detroit
is nearly bulletproof. In my opinion (and in my experience), it makes more
sense to get the best the first time even though it costs more. Buying a
cheaper rear locker to save a few bucks now may (and probably will) cost more
in the long run. If you can't afford a Detroit and a front locker now, get the
Detroit and do the front later.
Robert Bills
KG6LMV
Orange County CA
http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
http://www.RobertBills.com
>go with lockright front and back.
>This is in an 81 CJ7, dana 30 front, AMC 20 rear with one peice axles.
Here is my setup: Dana 30 front with "Dana 44 sized" Warn chromoly axles,
6-bolt hubs, 4.56 gears and Lockright. Rear is an AMC 20 with Summers Bros.
1-piece axles, welded tubes, and Detroit.
I have tried "lunchbox" lockers in the rear, and have broken them. The Detroit
is nearly bulletproof. In my opinion (and in my experience), it makes more
sense to get the best the first time even though it costs more. Buying a
cheaper rear locker to save a few bucks now may (and probably will) cost more
in the long run. If you can't afford a Detroit and a front locker now, get the
Detroit and do the front later.
Robert Bills
KG6LMV
Orange County CA
http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
http://www.RobertBills.com
07-02-2004, 12:21 PM
#6
Guest
Posts: n/a
Re: Detroit rear, or Lockright F&B?
I have the Detroit out back, and the EZ Locker (same as LockRight) up front.
I like my set up. I also have the same axle arrangement as you. My gear set
is the 4.10 with 32x11.50s, and the 258 motor.
"Greg" <greglc84@hotmail.com> wrote in message
news:75dFc.930682$Pk3.304343@pd7tw1no...
> If you had a choice, would you go with the detroit locker in rear only,
or
> go with lockright front and back. Given that 2 lockrights are about
$150.00
> Canadian less then the detroit. I'm changing gears, so now is the time to
do
> something, so the install cost of the detroit wont come into it.
Decisions,
> decisions.
> This is in an 81 CJ7, dana 30 front, AMC 20 rear with one peice axles.
>
>
I like my set up. I also have the same axle arrangement as you. My gear set
is the 4.10 with 32x11.50s, and the 258 motor.
"Greg" <greglc84@hotmail.com> wrote in message
news:75dFc.930682$Pk3.304343@pd7tw1no...
> If you had a choice, would you go with the detroit locker in rear only,
or
> go with lockright front and back. Given that 2 lockrights are about
$150.00
> Canadian less then the detroit. I'm changing gears, so now is the time to
do
> something, so the install cost of the detroit wont come into it.
Decisions,
> decisions.
> This is in an 81 CJ7, dana 30 front, AMC 20 rear with one peice axles.
>
>
07-02-2004, 12:21 PM
#7
Guest
Posts: n/a
Re: Detroit rear, or Lockright F&B?
I have the Detroit out back, and the EZ Locker (same as LockRight) up front.
I like my set up. I also have the same axle arrangement as you. My gear set
is the 4.10 with 32x11.50s, and the 258 motor.
"Greg" <greglc84@hotmail.com> wrote in message
news:75dFc.930682$Pk3.304343@pd7tw1no...
> If you had a choice, would you go with the detroit locker in rear only,
or
> go with lockright front and back. Given that 2 lockrights are about
$150.00
> Canadian less then the detroit. I'm changing gears, so now is the time to
do
> something, so the install cost of the detroit wont come into it.
Decisions,
> decisions.
> This is in an 81 CJ7, dana 30 front, AMC 20 rear with one peice axles.
>
>
I like my set up. I also have the same axle arrangement as you. My gear set
is the 4.10 with 32x11.50s, and the 258 motor.
"Greg" <greglc84@hotmail.com> wrote in message
news:75dFc.930682$Pk3.304343@pd7tw1no...
> If you had a choice, would you go with the detroit locker in rear only,
or
> go with lockright front and back. Given that 2 lockrights are about
$150.00
> Canadian less then the detroit. I'm changing gears, so now is the time to
do
> something, so the install cost of the detroit wont come into it.
Decisions,
> decisions.
> This is in an 81 CJ7, dana 30 front, AMC 20 rear with one peice axles.
>
>
07-02-2004, 12:21 PM
#8
Guest
Posts: n/a
Re: Detroit rear, or Lockright F&B?
I have the Detroit out back, and the EZ Locker (same as LockRight) up front.
I like my set up. I also have the same axle arrangement as you. My gear set
is the 4.10 with 32x11.50s, and the 258 motor.
"Greg" <greglc84@hotmail.com> wrote in message
news:75dFc.930682$Pk3.304343@pd7tw1no...
> If you had a choice, would you go with the detroit locker in rear only,
or
> go with lockright front and back. Given that 2 lockrights are about
$150.00
> Canadian less then the detroit. I'm changing gears, so now is the time to
do
> something, so the install cost of the detroit wont come into it.
Decisions,
> decisions.
> This is in an 81 CJ7, dana 30 front, AMC 20 rear with one peice axles.
>
>
I like my set up. I also have the same axle arrangement as you. My gear set
is the 4.10 with 32x11.50s, and the 258 motor.
"Greg" <greglc84@hotmail.com> wrote in message
news:75dFc.930682$Pk3.304343@pd7tw1no...
> If you had a choice, would you go with the detroit locker in rear only,
or
> go with lockright front and back. Given that 2 lockrights are about
$150.00
> Canadian less then the detroit. I'm changing gears, so now is the time to
do
> something, so the install cost of the detroit wont come into it.
Decisions,
> decisions.
> This is in an 81 CJ7, dana 30 front, AMC 20 rear with one peice axles.
>
>
07-02-2004, 12:21 PM
#9
Guest
Posts: n/a
Re: Detroit rear, or Lockright F&B?
I have the Detroit out back, and the EZ Locker (same as LockRight) up front.
I like my set up. I also have the same axle arrangement as you. My gear set
is the 4.10 with 32x11.50s, and the 258 motor.
"Greg" <greglc84@hotmail.com> wrote in message
news:75dFc.930682$Pk3.304343@pd7tw1no...
> If you had a choice, would you go with the detroit locker in rear only,
or
> go with lockright front and back. Given that 2 lockrights are about
$150.00
> Canadian less then the detroit. I'm changing gears, so now is the time to
do
> something, so the install cost of the detroit wont come into it.
Decisions,
> decisions.
> This is in an 81 CJ7, dana 30 front, AMC 20 rear with one peice axles.
>
>
I like my set up. I also have the same axle arrangement as you. My gear set
is the 4.10 with 32x11.50s, and the 258 motor.
"Greg" <greglc84@hotmail.com> wrote in message
news:75dFc.930682$Pk3.304343@pd7tw1no...
> If you had a choice, would you go with the detroit locker in rear only,
or
> go with lockright front and back. Given that 2 lockrights are about
$150.00
> Canadian less then the detroit. I'm changing gears, so now is the time to
do
> something, so the install cost of the detroit wont come into it.
Decisions,
> decisions.
> This is in an 81 CJ7, dana 30 front, AMC 20 rear with one peice axles.
>
>
Thread
Thread Starter
Forum
Replies
Last Post
BagMan
Jeep Mailing List
4
06-02-2005 03:11 PM
Jody Hodgson
Jeep Mailing List
0
06-01-2005 09:50 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)