"Peter Parker" <nospam@zero.com> wrote in message
news:40c928ef_2@nntp2.nac.net...
> In article <s98yc.4214$wD5.483@fe1.texas.rr.com>, GK <nospam@nospam.com>
wrote:
> >
> >"Peter Parker" <nospam@zero.com> wrote in message
> >news:40c8aede$1_2@nntp2.nac.net...
> >> My 94 YJ stock body mounts are slowly falling apart. I really don't
like
> >> to lift the body. IMO it's not really needed especially if you have
stock
> >> wheels and suspension. However. I want to replace the body mounts and
> >> are the DayStar 1 inch body lift kits really noticable? I know the fan
> >> cover shroud needs to be moved one inch.
> >>
> >> Who has them and how much of a difference is the feel of the Jeep after
> >> you lift it. Opinions, good and bad. I did a search on them and it
looks
> >> like a bunch of promotors so I am not totally convinced.
> >>
> >> Are there any alternative body mount kits that are not lifted?
> >>
> >>
> >> --
> >> Jeeps and dubs and everything's nice...
> >> Replace nospam with jetta for e-mail
> >
> >
> >> are the DayStar 1 inch body lift kits really noticable?
> >No, just get the black ones and not some funky color.
>
> That is what I wanted to do. I don't want to turn my YJ into a circus
> clown mobile. :) The red one would do that with my Hunter Green. :)
>
> >> Who has them and how much of a difference is the feel of the Jeep after
> >> you lift it.
> >I have personally installed 4 of them: 3 TJs and 1 CJ-5. You feel a
little
> >less body role and ride is about the same.
>
> Less body role. That is interesting. I would have thought more. Okay what
> about sharp turns. I guess it should be good.
>
> >> Are there any alternative body mount kits that are not lifted?
> >Yes, you can get stock height rubber or poly.
> >http://www.4wd.com/shopwrangler/Prod...ductSKU=110525
> >or
> >http://www.4wd.com/shopwrangler/Prod...ctSKU=5462446K
(Might
> >work with a YJ)
>
> Okay but my hardware is falling apart. I see your next paragraph and that
> is why I opted with the Daystar kit.
>
> > The biggest benefit of getting the Daystar kit besides a small lift is
new
> >hardware. This can be really important on an older Jeep. If you want to
> >avoid altering your fan shroud, you can opt to install a 1" motor mount
lift
> >in tandem with the body lift.
> >http://www.jksmfg.com/one_inch_motor_mount.htm
> >or
> >http://www.jksmfg.com/1_bmm_lift.htm
>
> Okay great. I with consider this thanks!
>
> BTW, I saw a YJ with a three inch body lift and I almost died laughing.
> That is why I am concerned and now I feel a bit better.
>
>
> >Regards,
> >
> >GK
>
>
> --
> Jeeps and dubs and everything's nice...
> Replace nospam with jetta for e-mail


Yeah, I feel the same way. Anything over a 1" body lift just looks bad to me
and they put unnecessary strain on the body mounts because of the longer
hardware. A whole bunch of other things tend to go out of wack too: Gas
filler neck, Steering Column, A/C Lines, Brake Lines, Shifters, etc. The 1"
lift is pretty unobtrusive.

Good luck,

GK

 

"Peter Parker" <nospam@zero.com> wrote in message
news:40c928ef_2@nntp2.nac.net...
> In article <s98yc.4214$wD5.483@fe1.texas.rr.com>, GK <nospam@nospam.com>
wrote:
> >
> >"Peter Parker" <nospam@zero.com> wrote in message
> >news:40c8aede$1_2@nntp2.nac.net...
> >> My 94 YJ stock body mounts are slowly falling apart. I really don't
like
> >> to lift the body. IMO it's not really needed especially if you have
stock
> >> wheels and suspension. However. I want to replace the body mounts and
> >> are the DayStar 1 inch body lift kits really noticable? I know the fan
> >> cover shroud needs to be moved one inch.
> >>
> >> Who has them and how much of a difference is the feel of the Jeep after
> >> you lift it. Opinions, good and bad. I did a search on them and it
looks
> >> like a bunch of promotors so I am not totally convinced.
> >>
> >> Are there any alternative body mount kits that are not lifted?
> >>
> >>
> >> --
> >> Jeeps and dubs and everything's nice...
> >> Replace nospam with jetta for e-mail
> >
> >
> >> are the DayStar 1 inch body lift kits really noticable?
> >No, just get the black ones and not some funky color.
>
> That is what I wanted to do. I don't want to turn my YJ into a circus
> clown mobile. :) The red one would do that with my Hunter Green. :)
>
> >> Who has them and how much of a difference is the feel of the Jeep after
> >> you lift it.
> >I have personally installed 4 of them: 3 TJs and 1 CJ-5. You feel a
little
> >less body role and ride is about the same.
>
> Less body role. That is interesting. I would have thought more. Okay what
> about sharp turns. I guess it should be good.
>
> >> Are there any alternative body mount kits that are not lifted?
> >Yes, you can get stock height rubber or poly.
> >http://www.4wd.com/shopwrangler/Prod...ductSKU=110525
> >or
> >http://www.4wd.com/shopwrangler/Prod...ctSKU=5462446K
(Might
> >work with a YJ)
>
> Okay but my hardware is falling apart. I see your next paragraph and that
> is why I opted with the Daystar kit.
>
> > The biggest benefit of getting the Daystar kit besides a small lift is
new
> >hardware. This can be really important on an older Jeep. If you want to
> >avoid altering your fan shroud, you can opt to install a 1" motor mount
lift
> >in tandem with the body lift.
> >http://www.jksmfg.com/one_inch_motor_mount.htm
> >or
> >http://www.jksmfg.com/1_bmm_lift.htm
>
> Okay great. I with consider this thanks!
>
> BTW, I saw a YJ with a three inch body lift and I almost died laughing.
> That is why I am concerned and now I feel a bit better.
>
>
> >Regards,
> >
> >GK
>
>
> --
> Jeeps and dubs and everything's nice...
> Replace nospam with jetta for e-mail


Yeah, I feel the same way. Anything over a 1" body lift just looks bad to me
and they put unnecessary strain on the body mounts because of the longer
hardware. A whole bunch of other things tend to go out of wack too: Gas
filler neck, Steering Column, A/C Lines, Brake Lines, Shifters, etc. The 1"
lift is pretty unobtrusive.

Good luck,

GK

 

"Peter Parker" <nospam@zero.com> wrote in message
news:40c928ef_2@nntp2.nac.net...
> In article <s98yc.4214$wD5.483@fe1.texas.rr.com>, GK <nospam@nospam.com>
wrote:
> >
> >"Peter Parker" <nospam@zero.com> wrote in message
> >news:40c8aede$1_2@nntp2.nac.net...
> >> My 94 YJ stock body mounts are slowly falling apart. I really don't
like
> >> to lift the body. IMO it's not really needed especially if you have
stock
> >> wheels and suspension. However. I want to replace the body mounts and
> >> are the DayStar 1 inch body lift kits really noticable? I know the fan
> >> cover shroud needs to be moved one inch.
> >>
> >> Who has them and how much of a difference is the feel of the Jeep after
> >> you lift it. Opinions, good and bad. I did a search on them and it
looks
> >> like a bunch of promotors so I am not totally convinced.
> >>
> >> Are there any alternative body mount kits that are not lifted?
> >>
> >>
> >> --
> >> Jeeps and dubs and everything's nice...
> >> Replace nospam with jetta for e-mail
> >
> >
> >> are the DayStar 1 inch body lift kits really noticable?
> >No, just get the black ones and not some funky color.
>
> That is what I wanted to do. I don't want to turn my YJ into a circus
> clown mobile. :) The red one would do that with my Hunter Green. :)
>
> >> Who has them and how much of a difference is the feel of the Jeep after
> >> you lift it.
> >I have personally installed 4 of them: 3 TJs and 1 CJ-5. You feel a
little
> >less body role and ride is about the same.
>
> Less body role. That is interesting. I would have thought more. Okay what
> about sharp turns. I guess it should be good.
>
> >> Are there any alternative body mount kits that are not lifted?
> >Yes, you can get stock height rubber or poly.
> >http://www.4wd.com/shopwrangler/Prod...ductSKU=110525
> >or
> >http://www.4wd.com/shopwrangler/Prod...ctSKU=5462446K
(Might
> >work with a YJ)
>
> Okay but my hardware is falling apart. I see your next paragraph and that
> is why I opted with the Daystar kit.
>
> > The biggest benefit of getting the Daystar kit besides a small lift is
new
> >hardware. This can be really important on an older Jeep. If you want to
> >avoid altering your fan shroud, you can opt to install a 1" motor mount
lift
> >in tandem with the body lift.
> >http://www.jksmfg.com/one_inch_motor_mount.htm
> >or
> >http://www.jksmfg.com/1_bmm_lift.htm
>
> Okay great. I with consider this thanks!
>
> BTW, I saw a YJ with a three inch body lift and I almost died laughing.
> That is why I am concerned and now I feel a bit better.
>
>
> >Regards,
> >
> >GK
>
>
> --
> Jeeps and dubs and everything's nice...
> Replace nospam with jetta for e-mail


Yeah, I feel the same way. Anything over a 1" body lift just looks bad to me
and they put unnecessary strain on the body mounts because of the longer
hardware. A whole bunch of other things tend to go out of wack too: Gas
filler neck, Steering Column, A/C Lines, Brake Lines, Shifters, etc. The 1"
lift is pretty unobtrusive.

Good luck,

GK

 

"Peter Parker" <nospam@zero.com> wrote in message
news:40c928ef_2@nntp2.nac.net...
> In article <s98yc.4214$wD5.483@fe1.texas.rr.com>, GK <nospam@nospam.com>
wrote:
> >
> >"Peter Parker" <nospam@zero.com> wrote in message
> >news:40c8aede$1_2@nntp2.nac.net...
> >> My 94 YJ stock body mounts are slowly falling apart. I really don't
like
> >> to lift the body. IMO it's not really needed especially if you have
stock
> >> wheels and suspension. However. I want to replace the body mounts and
> >> are the DayStar 1 inch body lift kits really noticable? I know the fan
> >> cover shroud needs to be moved one inch.
> >>
> >> Who has them and how much of a difference is the feel of the Jeep after
> >> you lift it. Opinions, good and bad. I did a search on them and it
looks
> >> like a bunch of promotors so I am not totally convinced.
> >>
> >> Are there any alternative body mount kits that are not lifted?

There are several mount replacement kits out there that do not include a
body lift puck. I installed a 1" M.O.R.E. kit last spring and replaced all
the insulators, bolts & washers with new factory parts. It was fairly easy
to install but be prepared to helicoil the larger side bolts. Two of the
bolts on mine took out the threads. One rear one was so frozen it snapped
off of it's captive nut and no amount of prodding would get the stub out. I
finally just drove the whole contraption out and replaced it with a simple
bolt & lockwasher.

 

"Peter Parker" <nospam@zero.com> wrote in message
news:40c928ef_2@nntp2.nac.net...
> In article <s98yc.4214$wD5.483@fe1.texas.rr.com>, GK <nospam@nospam.com>
wrote:
> >
> >"Peter Parker" <nospam@zero.com> wrote in message
> >news:40c8aede$1_2@nntp2.nac.net...
> >> My 94 YJ stock body mounts are slowly falling apart. I really don't
like
> >> to lift the body. IMO it's not really needed especially if you have
stock
> >> wheels and suspension. However. I want to replace the body mounts and
> >> are the DayStar 1 inch body lift kits really noticable? I know the fan
> >> cover shroud needs to be moved one inch.
> >>
> >> Who has them and how much of a difference is the feel of the Jeep after
> >> you lift it. Opinions, good and bad. I did a search on them and it
looks
> >> like a bunch of promotors so I am not totally convinced.
> >>
> >> Are there any alternative body mount kits that are not lifted?

There are several mount replacement kits out there that do not include a
body lift puck. I installed a 1" M.O.R.E. kit last spring and replaced all
the insulators, bolts & washers with new factory parts. It was fairly easy
to install but be prepared to helicoil the larger side bolts. Two of the
bolts on mine took out the threads. One rear one was so frozen it snapped
off of it's captive nut and no amount of prodding would get the stub out. I
finally just drove the whole contraption out and replaced it with a simple
bolt & lockwasher.

 

"Peter Parker" <nospam@zero.com> wrote in message
news:40c928ef_2@nntp2.nac.net...
> In article <s98yc.4214$wD5.483@fe1.texas.rr.com>, GK <nospam@nospam.com>
wrote:
> >
> >"Peter Parker" <nospam@zero.com> wrote in message
> >news:40c8aede$1_2@nntp2.nac.net...
> >> My 94 YJ stock body mounts are slowly falling apart. I really don't
like
> >> to lift the body. IMO it's not really needed especially if you have
stock
> >> wheels and suspension. However. I want to replace the body mounts and
> >> are the DayStar 1 inch body lift kits really noticable? I know the fan
> >> cover shroud needs to be moved one inch.
> >>
> >> Who has them and how much of a difference is the feel of the Jeep after
> >> you lift it. Opinions, good and bad. I did a search on them and it
looks
> >> like a bunch of promotors so I am not totally convinced.
> >>
> >> Are there any alternative body mount kits that are not lifted?

There are several mount replacement kits out there that do not include a
body lift puck. I installed a 1" M.O.R.E. kit last spring and replaced all
the insulators, bolts & washers with new factory parts. It was fairly easy
to install but be prepared to helicoil the larger side bolts. Two of the
bolts on mine took out the threads. One rear one was so frozen it snapped
off of it's captive nut and no amount of prodding would get the stub out. I
finally just drove the whole contraption out and replaced it with a simple
bolt & lockwasher.

 

"Peter Parker" <nospam@zero.com> wrote in message
news:40c928ef_2@nntp2.nac.net...
> In article <s98yc.4214$wD5.483@fe1.texas.rr.com>, GK <nospam@nospam.com>
wrote:
> >
> >"Peter Parker" <nospam@zero.com> wrote in message
> >news:40c8aede$1_2@nntp2.nac.net...
> >> My 94 YJ stock body mounts are slowly falling apart. I really don't
like
> >> to lift the body. IMO it's not really needed especially if you have
stock
> >> wheels and suspension. However. I want to replace the body mounts and
> >> are the DayStar 1 inch body lift kits really noticable? I know the fan
> >> cover shroud needs to be moved one inch.
> >>
> >> Who has them and how much of a difference is the feel of the Jeep after
> >> you lift it. Opinions, good and bad. I did a search on them and it
looks
> >> like a bunch of promotors so I am not totally convinced.
> >>
> >> Are there any alternative body mount kits that are not lifted?

There are several mount replacement kits out there that do not include a
body lift puck. I installed a 1" M.O.R.E. kit last spring and replaced all
the insulators, bolts & washers with new factory parts. It was fairly easy
to install but be prepared to helicoil the larger side bolts. Two of the
bolts on mine took out the threads. One rear one was so frozen it snapped
off of it's captive nut and no amount of prodding would get the stub out. I
finally just drove the whole contraption out and replaced it with a simple
bolt & lockwasher.

 

Now don't thell me that, I've been spraying those two bolts for 3 days in
the hopes they would come out, same kit, M.O.R.E. 1".

"Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
news:cacen001oqv@enews4.newsguy.com...
> "Peter Parker" <nospam@zero.com> wrote in message
> news:40c928ef_2@nntp2.nac.net...
> > In article <s98yc.4214$wD5.483@fe1.texas.rr.com>, GK <nospam@nospam.com>
> wrote:
> > >
> > >"Peter Parker" <nospam@zero.com> wrote in message
> > >news:40c8aede$1_2@nntp2.nac.net...
> > >> My 94 YJ stock body mounts are slowly falling apart. I really don't
> like
> > >> to lift the body. IMO it's not really needed especially if you have
> stock
> > >> wheels and suspension. However. I want to replace the body mounts and
> > >> are the DayStar 1 inch body lift kits really noticable? I know the
fan
> > >> cover shroud needs to be moved one inch.
> > >>
> > >> Who has them and how much of a difference is the feel of the Jeep
after
> > >> you lift it. Opinions, good and bad. I did a search on them and it
> looks
> > >> like a bunch of promotors so I am not totally convinced.
> > >>
> > >> Are there any alternative body mount kits that are not lifted?
>
> There are several mount replacement kits out there that do not include a
> body lift puck. I installed a 1" M.O.R.E. kit last spring and replaced all
> the insulators, bolts & washers with new factory parts. It was fairly easy
> to install but be prepared to helicoil the larger side bolts. Two of the
> bolts on mine took out the threads. One rear one was so frozen it snapped
> off of it's captive nut and no amount of prodding would get the stub out.
I
> finally just drove the whole contraption out and replaced it with a simple
> bolt & lockwasher.
>
>

 

Now don't thell me that, I've been spraying those two bolts for 3 days in
the hopes they would come out, same kit, M.O.R.E. 1".

"Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
news:cacen001oqv@enews4.newsguy.com...
> "Peter Parker" <nospam@zero.com> wrote in message
> news:40c928ef_2@nntp2.nac.net...
> > In article <s98yc.4214$wD5.483@fe1.texas.rr.com>, GK <nospam@nospam.com>
> wrote:
> > >
> > >"Peter Parker" <nospam@zero.com> wrote in message
> > >news:40c8aede$1_2@nntp2.nac.net...
> > >> My 94 YJ stock body mounts are slowly falling apart. I really don't
> like
> > >> to lift the body. IMO it's not really needed especially if you have
> stock
> > >> wheels and suspension. However. I want to replace the body mounts and
> > >> are the DayStar 1 inch body lift kits really noticable? I know the
fan
> > >> cover shroud needs to be moved one inch.
> > >>
> > >> Who has them and how much of a difference is the feel of the Jeep
after
> > >> you lift it. Opinions, good and bad. I did a search on them and it
> looks
> > >> like a bunch of promotors so I am not totally convinced.
> > >>
> > >> Are there any alternative body mount kits that are not lifted?
>
> There are several mount replacement kits out there that do not include a
> body lift puck. I installed a 1" M.O.R.E. kit last spring and replaced all
> the insulators, bolts & washers with new factory parts. It was fairly easy
> to install but be prepared to helicoil the larger side bolts. Two of the
> bolts on mine took out the threads. One rear one was so frozen it snapped
> off of it's captive nut and no amount of prodding would get the stub out.
I
> finally just drove the whole contraption out and replaced it with a simple
> bolt & lockwasher.
>
>

 

Now don't thell me that, I've been spraying those two bolts for 3 days in
the hopes they would come out, same kit, M.O.R.E. 1".

"Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
news:cacen001oqv@enews4.newsguy.com...
> "Peter Parker" <nospam@zero.com> wrote in message
> news:40c928ef_2@nntp2.nac.net...
> > In article <s98yc.4214$wD5.483@fe1.texas.rr.com>, GK <nospam@nospam.com>
> wrote:
> > >
> > >"Peter Parker" <nospam@zero.com> wrote in message
> > >news:40c8aede$1_2@nntp2.nac.net...
> > >> My 94 YJ stock body mounts are slowly falling apart. I really don't
> like
> > >> to lift the body. IMO it's not really needed especially if you have
> stock
> > >> wheels and suspension. However. I want to replace the body mounts and
> > >> are the DayStar 1 inch body lift kits really noticable? I know the
fan
> > >> cover shroud needs to be moved one inch.
> > >>
> > >> Who has them and how much of a difference is the feel of the Jeep
after
> > >> you lift it. Opinions, good and bad. I did a search on them and it
> looks
> > >> like a bunch of promotors so I am not totally convinced.
> > >>
> > >> Are there any alternative body mount kits that are not lifted?
>
> There are several mount replacement kits out there that do not include a
> body lift puck. I installed a 1" M.O.R.E. kit last spring and replaced all
> the insulators, bolts & washers with new factory parts. It was fairly easy
> to install but be prepared to helicoil the larger side bolts. Two of the
> bolts on mine took out the threads. One rear one was so frozen it snapped
> off of it's captive nut and no amount of prodding would get the stub out.
I
> finally just drove the whole contraption out and replaced it with a simple
> bolt & lockwasher.
>
>