Dana Mode 20 Axle Tube Diameter?
05-09-2005, 03:47 PM
#71
Guest
Posts: n/a
Re: Dana Mode 20 Axle Tube Diameter?
On 2005-05-09 12:58:33 -0500, "Jeff Strickland" <spamcatcher@yahoo.net> said:
> OK, I get it.
>
> I don't know what the diameter of the tube is, but I see where you may need
> to know it. What I have been saying all along is that if they look up the
> '85 CJ with the AMC20 axle, then they should know which perch you need after
> you tell them which spring you have. There are narrow and wide springs for
> the front, but perhaps there is only one size spring for the back.
They wanted to know the diameter of the tube, as they said, the perches
are generic with the differences being the radius of the axle cutout. I
guess they make them for many size tubes and you buy what you need,
trouble was I didn't know what I needed. I do now, my calipers showed 2
1/2 inches.
Oh well, we all learn something new everyday. Thanks!
Now if I can just find an ARB freezer fridge in the middle 42 size in
stock somewhere... I bought one from a fellow on ebay, he emailed me
back and said he didn't actually have one, 4wheel supply advertised
them as well and I just got off the phone with their rep, after an
online order, and he said they didn't have them either, crap.
----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
> OK, I get it.
>
> I don't know what the diameter of the tube is, but I see where you may need
> to know it. What I have been saying all along is that if they look up the
> '85 CJ with the AMC20 axle, then they should know which perch you need after
> you tell them which spring you have. There are narrow and wide springs for
> the front, but perhaps there is only one size spring for the back.
They wanted to know the diameter of the tube, as they said, the perches
are generic with the differences being the radius of the axle cutout. I
guess they make them for many size tubes and you buy what you need,
trouble was I didn't know what I needed. I do now, my calipers showed 2
1/2 inches.
Oh well, we all learn something new everyday. Thanks!
Now if I can just find an ARB freezer fridge in the middle 42 size in
stock somewhere... I bought one from a fellow on ebay, he emailed me
back and said he didn't actually have one, 4wheel supply advertised
them as well and I just got off the phone with their rep, after an
online order, and he said they didn't have them either, crap.
----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
05-09-2005, 03:47 PM
#72
Guest
Posts: n/a
Re: Dana Mode 20 Axle Tube Diameter?
On 2005-05-09 12:58:33 -0500, "Jeff Strickland" <spamcatcher@yahoo.net> said:
> OK, I get it.
>
> I don't know what the diameter of the tube is, but I see where you may need
> to know it. What I have been saying all along is that if they look up the
> '85 CJ with the AMC20 axle, then they should know which perch you need after
> you tell them which spring you have. There are narrow and wide springs for
> the front, but perhaps there is only one size spring for the back.
They wanted to know the diameter of the tube, as they said, the perches
are generic with the differences being the radius of the axle cutout. I
guess they make them for many size tubes and you buy what you need,
trouble was I didn't know what I needed. I do now, my calipers showed 2
1/2 inches.
Oh well, we all learn something new everyday. Thanks!
Now if I can just find an ARB freezer fridge in the middle 42 size in
stock somewhere... I bought one from a fellow on ebay, he emailed me
back and said he didn't actually have one, 4wheel supply advertised
them as well and I just got off the phone with their rep, after an
online order, and he said they didn't have them either, crap.
----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
> OK, I get it.
>
> I don't know what the diameter of the tube is, but I see where you may need
> to know it. What I have been saying all along is that if they look up the
> '85 CJ with the AMC20 axle, then they should know which perch you need after
> you tell them which spring you have. There are narrow and wide springs for
> the front, but perhaps there is only one size spring for the back.
They wanted to know the diameter of the tube, as they said, the perches
are generic with the differences being the radius of the axle cutout. I
guess they make them for many size tubes and you buy what you need,
trouble was I didn't know what I needed. I do now, my calipers showed 2
1/2 inches.
Oh well, we all learn something new everyday. Thanks!
Now if I can just find an ARB freezer fridge in the middle 42 size in
stock somewhere... I bought one from a fellow on ebay, he emailed me
back and said he didn't actually have one, 4wheel supply advertised
them as well and I just got off the phone with their rep, after an
online order, and he said they didn't have them either, crap.
----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
05-09-2005, 03:47 PM
#73
Guest
Posts: n/a
Re: Dana Mode 20 Axle Tube Diameter?
On 2005-05-09 12:58:33 -0500, "Jeff Strickland" <spamcatcher@yahoo.net> said:
> OK, I get it.
>
> I don't know what the diameter of the tube is, but I see where you may need
> to know it. What I have been saying all along is that if they look up the
> '85 CJ with the AMC20 axle, then they should know which perch you need after
> you tell them which spring you have. There are narrow and wide springs for
> the front, but perhaps there is only one size spring for the back.
They wanted to know the diameter of the tube, as they said, the perches
are generic with the differences being the radius of the axle cutout. I
guess they make them for many size tubes and you buy what you need,
trouble was I didn't know what I needed. I do now, my calipers showed 2
1/2 inches.
Oh well, we all learn something new everyday. Thanks!
Now if I can just find an ARB freezer fridge in the middle 42 size in
stock somewhere... I bought one from a fellow on ebay, he emailed me
back and said he didn't actually have one, 4wheel supply advertised
them as well and I just got off the phone with their rep, after an
online order, and he said they didn't have them either, crap.
----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
> OK, I get it.
>
> I don't know what the diameter of the tube is, but I see where you may need
> to know it. What I have been saying all along is that if they look up the
> '85 CJ with the AMC20 axle, then they should know which perch you need after
> you tell them which spring you have. There are narrow and wide springs for
> the front, but perhaps there is only one size spring for the back.
They wanted to know the diameter of the tube, as they said, the perches
are generic with the differences being the radius of the axle cutout. I
guess they make them for many size tubes and you buy what you need,
trouble was I didn't know what I needed. I do now, my calipers showed 2
1/2 inches.
Oh well, we all learn something new everyday. Thanks!
Now if I can just find an ARB freezer fridge in the middle 42 size in
stock somewhere... I bought one from a fellow on ebay, he emailed me
back and said he didn't actually have one, 4wheel supply advertised
them as well and I just got off the phone with their rep, after an
online order, and he said they didn't have them either, crap.
----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
05-10-2005, 09:52 AM
#74
Guest
Posts: n/a
Re: Dana Mode 20 Axle Tube Diameter?
On 2005-05-09 14:47:15 -0500, Jeepers! <jeepdeere@aol.com> said:
Update:
There is only one size of spring perch: 3" radius
!?!?!?!?!!!!!!!
----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
Update:
There is only one size of spring perch: 3" radius
!?!?!?!?!!!!!!!
----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
05-10-2005, 09:52 AM
#75
Guest
Posts: n/a
Re: Dana Mode 20 Axle Tube Diameter?
On 2005-05-09 14:47:15 -0500, Jeepers! <jeepdeere@aol.com> said:
Update:
There is only one size of spring perch: 3" radius
!?!?!?!?!!!!!!!
----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
Update:
There is only one size of spring perch: 3" radius
!?!?!?!?!!!!!!!
----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
05-10-2005, 09:52 AM
#76
Guest
Posts: n/a
Re: Dana Mode 20 Axle Tube Diameter?
On 2005-05-09 14:47:15 -0500, Jeepers! <jeepdeere@aol.com> said:
Update:
There is only one size of spring perch: 3" radius
!?!?!?!?!!!!!!!
----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
Update:
There is only one size of spring perch: 3" radius
!?!?!?!?!!!!!!!
----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
05-10-2005, 09:52 AM
#77
Guest
Posts: n/a
Re: Dana Mode 20 Axle Tube Diameter?
On 2005-05-09 14:47:15 -0500, Jeepers! <jeepdeere@aol.com> said:
Update:
There is only one size of spring perch: 3" radius
!?!?!?!?!!!!!!!
----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
Update:
There is only one size of spring perch: 3" radius
!?!?!?!?!!!!!!!
----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
05-10-2005, 04:51 PM
#78
Guest
Posts: n/a
Re: Dana Mode 20 Axle Tube Diameter?
http://www.discountjeepparts.com/cat...p/cPath/91_102
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
"Jeepers!" wrote:
>
> On 2005-05-09 14:47:15 -0500, Jeepers! <jeepdeere@aol.com> said:
> Update:
> There is only one size of spring perch: 3" radius
>
> !?!?!?!?!!!!!!!
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
"Jeepers!" wrote:
>
> On 2005-05-09 14:47:15 -0500, Jeepers! <jeepdeere@aol.com> said:
> Update:
> There is only one size of spring perch: 3" radius
>
> !?!?!?!?!!!!!!!
05-10-2005, 04:51 PM
#79
Guest
Posts: n/a
Re: Dana Mode 20 Axle Tube Diameter?
http://www.discountjeepparts.com/cat...p/cPath/91_102
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
"Jeepers!" wrote:
>
> On 2005-05-09 14:47:15 -0500, Jeepers! <jeepdeere@aol.com> said:
> Update:
> There is only one size of spring perch: 3" radius
>
> !?!?!?!?!!!!!!!
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
"Jeepers!" wrote:
>
> On 2005-05-09 14:47:15 -0500, Jeepers! <jeepdeere@aol.com> said:
> Update:
> There is only one size of spring perch: 3" radius
>
> !?!?!?!?!!!!!!!
05-10-2005, 04:51 PM
#80
Guest
Posts: n/a
Re: Dana Mode 20 Axle Tube Diameter?
http://www.discountjeepparts.com/cat...p/cPath/91_102
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
"Jeepers!" wrote:
>
> On 2005-05-09 14:47:15 -0500, Jeepers! <jeepdeere@aol.com> said:
> Update:
> There is only one size of spring perch: 3" radius
>
> !?!?!?!?!!!!!!!
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
"Jeepers!" wrote:
>
> On 2005-05-09 14:47:15 -0500, Jeepers! <jeepdeere@aol.com> said:
> Update:
> There is only one size of spring perch: 3" radius
>
> !?!?!?!?!!!!!!!
