Dana 44 - 30 spline axle question
05-14-2005, 09:00 AM
#1
Guest
Posts: n/a
Dana 44 - 30 spline axle question
What is different between an open diff Dana 44 - 30 spline axle and a
Trac-Lok diff Dana 44 - 30 spline axle? I am interested in
purchasing the Powertrax No-Slip traction system for my 2000 Wrangler
and I see that they have two different part numbers for open vs.
Trac-Lok Dana 44 axles.
Trac-Lok diff Dana 44 - 30 spline axle? I am interested in
purchasing the Powertrax No-Slip traction system for my 2000 Wrangler
and I see that they have two different part numbers for open vs.
Trac-Lok Dana 44 axles.
05-14-2005, 09:44 AM
#2
Guest
Posts: n/a
Re: Dana 44 - 30 spline axle question
Why don't you finish one thread before starting a bunch more about the
same thing?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
JeePenn wrote:
>
> What is different between an open diff Dana 44 - 30 spline axle and a
> Trac-Lok diff Dana 44 - 30 spline axle? I am interested in
> purchasing the Powertrax No-Slip traction system for my 2000 Wrangler
> and I see that they have two different part numbers for open vs.
> Trac-Lok Dana 44 axles.
same thing?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
JeePenn wrote:
>
> What is different between an open diff Dana 44 - 30 spline axle and a
> Trac-Lok diff Dana 44 - 30 spline axle? I am interested in
> purchasing the Powertrax No-Slip traction system for my 2000 Wrangler
> and I see that they have two different part numbers for open vs.
> Trac-Lok Dana 44 axles.
05-14-2005, 09:44 AM
#3
Guest
Posts: n/a
Re: Dana 44 - 30 spline axle question
Why don't you finish one thread before starting a bunch more about the
same thing?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
JeePenn wrote:
>
> What is different between an open diff Dana 44 - 30 spline axle and a
> Trac-Lok diff Dana 44 - 30 spline axle? I am interested in
> purchasing the Powertrax No-Slip traction system for my 2000 Wrangler
> and I see that they have two different part numbers for open vs.
> Trac-Lok Dana 44 axles.
same thing?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
JeePenn wrote:
>
> What is different between an open diff Dana 44 - 30 spline axle and a
> Trac-Lok diff Dana 44 - 30 spline axle? I am interested in
> purchasing the Powertrax No-Slip traction system for my 2000 Wrangler
> and I see that they have two different part numbers for open vs.
> Trac-Lok Dana 44 axles.
05-14-2005, 09:44 AM
#4
Guest
Posts: n/a
Re: Dana 44 - 30 spline axle question
Why don't you finish one thread before starting a bunch more about the
same thing?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
JeePenn wrote:
>
> What is different between an open diff Dana 44 - 30 spline axle and a
> Trac-Lok diff Dana 44 - 30 spline axle? I am interested in
> purchasing the Powertrax No-Slip traction system for my 2000 Wrangler
> and I see that they have two different part numbers for open vs.
> Trac-Lok Dana 44 axles.
same thing?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
JeePenn wrote:
>
> What is different between an open diff Dana 44 - 30 spline axle and a
> Trac-Lok diff Dana 44 - 30 spline axle? I am interested in
> purchasing the Powertrax No-Slip traction system for my 2000 Wrangler
> and I see that they have two different part numbers for open vs.
> Trac-Lok Dana 44 axles.
05-14-2005, 09:44 AM
#5
Guest
Posts: n/a
Re: Dana 44 - 30 spline axle question
Why don't you finish one thread before starting a bunch more about the
same thing?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
JeePenn wrote:
>
> What is different between an open diff Dana 44 - 30 spline axle and a
> Trac-Lok diff Dana 44 - 30 spline axle? I am interested in
> purchasing the Powertrax No-Slip traction system for my 2000 Wrangler
> and I see that they have two different part numbers for open vs.
> Trac-Lok Dana 44 axles.
same thing?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
JeePenn wrote:
>
> What is different between an open diff Dana 44 - 30 spline axle and a
> Trac-Lok diff Dana 44 - 30 spline axle? I am interested in
> purchasing the Powertrax No-Slip traction system for my 2000 Wrangler
> and I see that they have two different part numbers for open vs.
> Trac-Lok Dana 44 axles.
05-14-2005, 11:30 AM
#6
Guest
Posts: n/a
Re: Dana 44 - 30 spline axle question
There is no difference.
But if I were you, I would go for a Detroit Locker over the No-Slip. I
have a No-Slip in my front axle and a Detroit Locker in my rear Dana 44.
But a No-Slip in the rear would not be fun to drive on a daily driver
Jeep, its manners are pretty bad... nowhere near as good as the Detroit
Locker's are. Most any shop will install a Detroit Locker for only $150
or so because the only thing that needs to be set up is the backlash. A
Detroit Locker is FAR stronger and FAR better behaved on the street.
And I don't care what Powertrax's ads say for the No-Slip. It's fine in
a front axle but in the rear, it BANGS, LURCHES, SNAPS, etc. with far
greater frequency than you would enjoy.
JeePenn wrote:
> What is different between an open diff Dana 44 - 30 spline axle and a
> Trac-Lok diff Dana 44 - 30 spline axle? I am interested in
> purchasing the Powertrax No-Slip traction system for my 2000 Wrangler
> and I see that they have two different part numbers for open vs.
> Trac-Lok Dana 44 axles.
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
But if I were you, I would go for a Detroit Locker over the No-Slip. I
have a No-Slip in my front axle and a Detroit Locker in my rear Dana 44.
But a No-Slip in the rear would not be fun to drive on a daily driver
Jeep, its manners are pretty bad... nowhere near as good as the Detroit
Locker's are. Most any shop will install a Detroit Locker for only $150
or so because the only thing that needs to be set up is the backlash. A
Detroit Locker is FAR stronger and FAR better behaved on the street.
And I don't care what Powertrax's ads say for the No-Slip. It's fine in
a front axle but in the rear, it BANGS, LURCHES, SNAPS, etc. with far
greater frequency than you would enjoy.
JeePenn wrote:
> What is different between an open diff Dana 44 - 30 spline axle and a
> Trac-Lok diff Dana 44 - 30 spline axle? I am interested in
> purchasing the Powertrax No-Slip traction system for my 2000 Wrangler
> and I see that they have two different part numbers for open vs.
> Trac-Lok Dana 44 axles.
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
05-14-2005, 11:30 AM
#7
Guest
Posts: n/a
Re: Dana 44 - 30 spline axle question
There is no difference.
But if I were you, I would go for a Detroit Locker over the No-Slip. I
have a No-Slip in my front axle and a Detroit Locker in my rear Dana 44.
But a No-Slip in the rear would not be fun to drive on a daily driver
Jeep, its manners are pretty bad... nowhere near as good as the Detroit
Locker's are. Most any shop will install a Detroit Locker for only $150
or so because the only thing that needs to be set up is the backlash. A
Detroit Locker is FAR stronger and FAR better behaved on the street.
And I don't care what Powertrax's ads say for the No-Slip. It's fine in
a front axle but in the rear, it BANGS, LURCHES, SNAPS, etc. with far
greater frequency than you would enjoy.
JeePenn wrote:
> What is different between an open diff Dana 44 - 30 spline axle and a
> Trac-Lok diff Dana 44 - 30 spline axle? I am interested in
> purchasing the Powertrax No-Slip traction system for my 2000 Wrangler
> and I see that they have two different part numbers for open vs.
> Trac-Lok Dana 44 axles.
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
But if I were you, I would go for a Detroit Locker over the No-Slip. I
have a No-Slip in my front axle and a Detroit Locker in my rear Dana 44.
But a No-Slip in the rear would not be fun to drive on a daily driver
Jeep, its manners are pretty bad... nowhere near as good as the Detroit
Locker's are. Most any shop will install a Detroit Locker for only $150
or so because the only thing that needs to be set up is the backlash. A
Detroit Locker is FAR stronger and FAR better behaved on the street.
And I don't care what Powertrax's ads say for the No-Slip. It's fine in
a front axle but in the rear, it BANGS, LURCHES, SNAPS, etc. with far
greater frequency than you would enjoy.
JeePenn wrote:
> What is different between an open diff Dana 44 - 30 spline axle and a
> Trac-Lok diff Dana 44 - 30 spline axle? I am interested in
> purchasing the Powertrax No-Slip traction system for my 2000 Wrangler
> and I see that they have two different part numbers for open vs.
> Trac-Lok Dana 44 axles.
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
05-14-2005, 11:30 AM
#8
Guest
Posts: n/a
Re: Dana 44 - 30 spline axle question
There is no difference.
But if I were you, I would go for a Detroit Locker over the No-Slip. I
have a No-Slip in my front axle and a Detroit Locker in my rear Dana 44.
But a No-Slip in the rear would not be fun to drive on a daily driver
Jeep, its manners are pretty bad... nowhere near as good as the Detroit
Locker's are. Most any shop will install a Detroit Locker for only $150
or so because the only thing that needs to be set up is the backlash. A
Detroit Locker is FAR stronger and FAR better behaved on the street.
And I don't care what Powertrax's ads say for the No-Slip. It's fine in
a front axle but in the rear, it BANGS, LURCHES, SNAPS, etc. with far
greater frequency than you would enjoy.
JeePenn wrote:
> What is different between an open diff Dana 44 - 30 spline axle and a
> Trac-Lok diff Dana 44 - 30 spline axle? I am interested in
> purchasing the Powertrax No-Slip traction system for my 2000 Wrangler
> and I see that they have two different part numbers for open vs.
> Trac-Lok Dana 44 axles.
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
But if I were you, I would go for a Detroit Locker over the No-Slip. I
have a No-Slip in my front axle and a Detroit Locker in my rear Dana 44.
But a No-Slip in the rear would not be fun to drive on a daily driver
Jeep, its manners are pretty bad... nowhere near as good as the Detroit
Locker's are. Most any shop will install a Detroit Locker for only $150
or so because the only thing that needs to be set up is the backlash. A
Detroit Locker is FAR stronger and FAR better behaved on the street.
And I don't care what Powertrax's ads say for the No-Slip. It's fine in
a front axle but in the rear, it BANGS, LURCHES, SNAPS, etc. with far
greater frequency than you would enjoy.
JeePenn wrote:
> What is different between an open diff Dana 44 - 30 spline axle and a
> Trac-Lok diff Dana 44 - 30 spline axle? I am interested in
> purchasing the Powertrax No-Slip traction system for my 2000 Wrangler
> and I see that they have two different part numbers for open vs.
> Trac-Lok Dana 44 axles.
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
05-14-2005, 11:30 AM
#9
Guest
Posts: n/a
Re: Dana 44 - 30 spline axle question
There is no difference.
But if I were you, I would go for a Detroit Locker over the No-Slip. I
have a No-Slip in my front axle and a Detroit Locker in my rear Dana 44.
But a No-Slip in the rear would not be fun to drive on a daily driver
Jeep, its manners are pretty bad... nowhere near as good as the Detroit
Locker's are. Most any shop will install a Detroit Locker for only $150
or so because the only thing that needs to be set up is the backlash. A
Detroit Locker is FAR stronger and FAR better behaved on the street.
And I don't care what Powertrax's ads say for the No-Slip. It's fine in
a front axle but in the rear, it BANGS, LURCHES, SNAPS, etc. with far
greater frequency than you would enjoy.
JeePenn wrote:
> What is different between an open diff Dana 44 - 30 spline axle and a
> Trac-Lok diff Dana 44 - 30 spline axle? I am interested in
> purchasing the Powertrax No-Slip traction system for my 2000 Wrangler
> and I see that they have two different part numbers for open vs.
> Trac-Lok Dana 44 axles.
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
But if I were you, I would go for a Detroit Locker over the No-Slip. I
have a No-Slip in my front axle and a Detroit Locker in my rear Dana 44.
But a No-Slip in the rear would not be fun to drive on a daily driver
Jeep, its manners are pretty bad... nowhere near as good as the Detroit
Locker's are. Most any shop will install a Detroit Locker for only $150
or so because the only thing that needs to be set up is the backlash. A
Detroit Locker is FAR stronger and FAR better behaved on the street.
And I don't care what Powertrax's ads say for the No-Slip. It's fine in
a front axle but in the rear, it BANGS, LURCHES, SNAPS, etc. with far
greater frequency than you would enjoy.
JeePenn wrote:
> What is different between an open diff Dana 44 - 30 spline axle and a
> Trac-Lok diff Dana 44 - 30 spline axle? I am interested in
> purchasing the Powertrax No-Slip traction system for my 2000 Wrangler
> and I see that they have two different part numbers for open vs.
> Trac-Lok Dana 44 axles.
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
05-14-2005, 12:17 PM
#10
Guest
Posts: n/a
Re: Dana 44 - 30 spline axle question
Mike, I apologize if I violated any group regulations. It is my
opinion that my threads are mutually exclusive:
How do you determine if you have a limited slip diff without removing
the diff cover?
What is different on an open diff Dana 44 axle vs. a limited slip diff
Dana 44 axle?
Do all 2000 Wrangler factory installed Dana 44 diffs have the limited
slip?
Via your help I have determined that 1) I do have the limited slip and
2) all 2000 Wrangler factory equipped Dana 44 diffs did 'not' have
limited slips.
So I would say that those threads are indeed finished.
I love you man!
opinion that my threads are mutually exclusive:
How do you determine if you have a limited slip diff without removing
the diff cover?
What is different on an open diff Dana 44 axle vs. a limited slip diff
Dana 44 axle?
Do all 2000 Wrangler factory installed Dana 44 diffs have the limited
slip?
Via your help I have determined that 1) I do have the limited slip and
2) all 2000 Wrangler factory equipped Dana 44 diffs did 'not' have
limited slips.
So I would say that those threads are indeed finished.
I love you man!
