On Aug 14, 6:42 pm, "L.W. \(Bill\) ------ III"
<LWBillHug...@------.net> wrote:
> More than likely with the V8 or trailer package came a different axle
> ratio. Otherwise it should be a straight bolt in and driveshaft.
> God Bless America, Bill O|||||||O
> mailto:LW------...@aol.comhttp://www.----------.com/
>
> "bman" <brianhubley...@gmail.com> wrote in message
>
> news:1187111534.768671.44670@19g2000hsx.googlegrou ps.com...
>
>
>
> > I think the clutches in my 96 XJ w/ Track Lok Dana 35 are going bad.
> > 160,000 miles. (clunking/knocking and growning noises)
>
> > I have someone willing to sell me a Chrysler 8.25 from a 96 XJ w<65k
> > miles for $130
>
> > How difficult would the swap be? Tips?
>
> > I don't do so serious offroading so i don't really need the 8.25 and
> > im not sure how much it would cost to have my Dana rebuilt?
>
> > Any advice would be greatly appreciated.
>
> > Thanx in advance
>
> > Brian
>
> --
> Posted via a free Usenet account fromhttp://www.teranews.com

My existing drive shaft will work?

 

On Aug 14, 6:42 pm, "L.W. \(Bill\) ------ III"
<LWBillHug...@------.net> wrote:
> More than likely with the V8 or trailer package came a different axle
> ratio. Otherwise it should be a straight bolt in and driveshaft.
> God Bless America, Bill O|||||||O
> mailto:LW------...@aol.comhttp://www.----------.com/
>
> "bman" <brianhubley...@gmail.com> wrote in message
>
> news:1187111534.768671.44670@19g2000hsx.googlegrou ps.com...
>
>
>
> > I think the clutches in my 96 XJ w/ Track Lok Dana 35 are going bad.
> > 160,000 miles. (clunking/knocking and growning noises)
>
> > I have someone willing to sell me a Chrysler 8.25 from a 96 XJ w<65k
> > miles for $130
>
> > How difficult would the swap be? Tips?
>
> > I don't do so serious offroading so i don't really need the 8.25 and
> > im not sure how much it would cost to have my Dana rebuilt?
>
> > Any advice would be greatly appreciated.
>
> > Thanx in advance
>
> > Brian
>
> --
> Posted via a free Usenet account fromhttp://www.teranews.com

My existing drive shaft will work?

 

On Aug 14, 6:42 pm, "L.W. \(Bill\) ------ III"
<LWBillHug...@------.net> wrote:
> More than likely with the V8 or trailer package came a different axle
> ratio. Otherwise it should be a straight bolt in and driveshaft.
> God Bless America, Bill O|||||||O
> mailto:LW------...@aol.comhttp://www.----------.com/
>
> "bman" <brianhubley...@gmail.com> wrote in message
>
> news:1187111534.768671.44670@19g2000hsx.googlegrou ps.com...
>
>
>
> > I think the clutches in my 96 XJ w/ Track Lok Dana 35 are going bad.
> > 160,000 miles. (clunking/knocking and growning noises)
>
> > I have someone willing to sell me a Chrysler 8.25 from a 96 XJ w<65k
> > miles for $130
>
> > How difficult would the swap be? Tips?
>
> > I don't do so serious offroading so i don't really need the 8.25 and
> > im not sure how much it would cost to have my Dana rebuilt?
>
> > Any advice would be greatly appreciated.
>
> > Thanx in advance
>
> > Brian
>
> --
> Posted via a free Usenet account fromhttp://www.teranews.com

My existing drive shaft will work?

 

This from the biggest loser of them all! The jealous, really jealous, I
can't believe how jealous this little draft dodging coward schizophrenic
psychopath liar hiding in Vancouver via S0106000ea6ba70e7.vn.shawcable.net
24.86.24.251 intrepidator@shaw.ca who's only way to get attention is to make
a fool of its self using foul language, like it did back in elementary
school yard. But, too afraid to use it's name and address, and take on
responsibility like a grown up. With an obsession with perverts and goats,
where it writes via remailers, @news.alt.net, and cross posts to other
perverts to no one's surprise. With extreme jealous ranting over my
documents, possessions, successes, manliness and fine, Southern California
surfing body, beard, and loving Christian family. Committing forgery over
many of my posts, proving I'm a responsible American man. You remind me of a
little rat dog, like a Mexican Chiwawa with its senseless barking, me too,
me too. You're even more senile than I first thought. And the poor thing,
you're too girlie to take responsibility for yourself again, by signing your
statement like a man.
That really thinks the group's members are so stupid not to know it's
the same coward, posting over and over again using a schizophrenic
psychopath forged up names?
You're not worth any more time when a cut and paste this same
paragraphs it fits so well!
But, now worth a forwarding to: internet.help@shaw.ca,
security@shaw.ca, abuse@shaw.ca, internet.abuse@sjrb.ca, abuse@aioe.org,
admin@***.net for forgery.
Who said it also likes baby monkeys sucking their -----, like his buddy
posted on an auto picture group at:
news:0u7g43dkje4pdkqi07hl66s8kpifo564k1@4ax.com
I thought this traitor's attacks were just over personal disagreements,
but in reality these attacks stemming from my love of God and America on
Independents Week, I realized you are actually attacking my country, and
that's what you've been doing all along is declaring your hatred for the
United States of America, with each declaration of my signature, but just
too cowardly and stupid to be a ---------. It's America, love it, or leave
it, so keep the f*ck out!
Or let me know when you cross my American border, so I may arrest you!
YOU ARE A TRAITOR and lost all rights to my American border, and
someday I'll have you in jail where you belong! Any time, I'll fly and meant
with other patriots guarding our borders against vermin like you.
Forwarded to: alt.binaries.pictures.autos,
alt.binaries.automobile.pictures groups so they may to see what an a**hole
you, aka SW really is!!!!!
OK. We know for sure the Chrysler 8 1/4" ring gear is larger than the
7.5" Dana 35's, therefore: the pinion will be longer to hole the larger
bearings, and driveshaft will have to be shorter.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/


"c" <c@operamail.com> wrote in message
news:6Qwwi.61431$rX4.41872@pd7urf2no...
>
>
> You don't know for certain?
>
>
>
>
>



--
Posted via a free Usenet account from http://www.teranews.com

 

This from the biggest loser of them all! The jealous, really jealous, I
can't believe how jealous this little draft dodging coward schizophrenic
psychopath liar hiding in Vancouver via S0106000ea6ba70e7.vn.shawcable.net
24.86.24.251 intrepidator@shaw.ca who's only way to get attention is to make
a fool of its self using foul language, like it did back in elementary
school yard. But, too afraid to use it's name and address, and take on
responsibility like a grown up. With an obsession with perverts and goats,
where it writes via remailers, @news.alt.net, and cross posts to other
perverts to no one's surprise. With extreme jealous ranting over my
documents, possessions, successes, manliness and fine, Southern California
surfing body, beard, and loving Christian family. Committing forgery over
many of my posts, proving I'm a responsible American man. You remind me of a
little rat dog, like a Mexican Chiwawa with its senseless barking, me too,
me too. You're even more senile than I first thought. And the poor thing,
you're too girlie to take responsibility for yourself again, by signing your
statement like a man.
That really thinks the group's members are so stupid not to know it's
the same coward, posting over and over again using a schizophrenic
psychopath forged up names?
You're not worth any more time when a cut and paste this same
paragraphs it fits so well!
But, now worth a forwarding to: internet.help@shaw.ca,
security@shaw.ca, abuse@shaw.ca, internet.abuse@sjrb.ca, abuse@aioe.org,
admin@***.net for forgery.
Who said it also likes baby monkeys sucking their -----, like his buddy
posted on an auto picture group at:
news:0u7g43dkje4pdkqi07hl66s8kpifo564k1@4ax.com
I thought this traitor's attacks were just over personal disagreements,
but in reality these attacks stemming from my love of God and America on
Independents Week, I realized you are actually attacking my country, and
that's what you've been doing all along is declaring your hatred for the
United States of America, with each declaration of my signature, but just
too cowardly and stupid to be a ---------. It's America, love it, or leave
it, so keep the f*ck out!
Or let me know when you cross my American border, so I may arrest you!
YOU ARE A TRAITOR and lost all rights to my American border, and
someday I'll have you in jail where you belong! Any time, I'll fly and meant
with other patriots guarding our borders against vermin like you.
Forwarded to: alt.binaries.pictures.autos,
alt.binaries.automobile.pictures groups so they may to see what an a**hole
you, aka SW really is!!!!!
OK. We know for sure the Chrysler 8 1/4" ring gear is larger than the
7.5" Dana 35's, therefore: the pinion will be longer to hole the larger
bearings, and driveshaft will have to be shorter.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/


"c" <c@operamail.com> wrote in message
news:6Qwwi.61431$rX4.41872@pd7urf2no...
>
>
> You don't know for certain?
>
>
>
>
>



--
Posted via a free Usenet account from http://www.teranews.com

 

This from the biggest loser of them all! The jealous, really jealous, I
can't believe how jealous this little draft dodging coward schizophrenic
psychopath liar hiding in Vancouver via S0106000ea6ba70e7.vn.shawcable.net
24.86.24.251 intrepidator@shaw.ca who's only way to get attention is to make
a fool of its self using foul language, like it did back in elementary
school yard. But, too afraid to use it's name and address, and take on
responsibility like a grown up. With an obsession with perverts and goats,
where it writes via remailers, @news.alt.net, and cross posts to other
perverts to no one's surprise. With extreme jealous ranting over my
documents, possessions, successes, manliness and fine, Southern California
surfing body, beard, and loving Christian family. Committing forgery over
many of my posts, proving I'm a responsible American man. You remind me of a
little rat dog, like a Mexican Chiwawa with its senseless barking, me too,
me too. You're even more senile than I first thought. And the poor thing,
you're too girlie to take responsibility for yourself again, by signing your
statement like a man.
That really thinks the group's members are so stupid not to know it's
the same coward, posting over and over again using a schizophrenic
psychopath forged up names?
You're not worth any more time when a cut and paste this same
paragraphs it fits so well!
But, now worth a forwarding to: internet.help@shaw.ca,
security@shaw.ca, abuse@shaw.ca, internet.abuse@sjrb.ca, abuse@aioe.org,
admin@***.net for forgery.
Who said it also likes baby monkeys sucking their -----, like his buddy
posted on an auto picture group at:
news:0u7g43dkje4pdkqi07hl66s8kpifo564k1@4ax.com
I thought this traitor's attacks were just over personal disagreements,
but in reality these attacks stemming from my love of God and America on
Independents Week, I realized you are actually attacking my country, and
that's what you've been doing all along is declaring your hatred for the
United States of America, with each declaration of my signature, but just
too cowardly and stupid to be a ---------. It's America, love it, or leave
it, so keep the f*ck out!
Or let me know when you cross my American border, so I may arrest you!
YOU ARE A TRAITOR and lost all rights to my American border, and
someday I'll have you in jail where you belong! Any time, I'll fly and meant
with other patriots guarding our borders against vermin like you.
Forwarded to: alt.binaries.pictures.autos,
alt.binaries.automobile.pictures groups so they may to see what an a**hole
you, aka SW really is!!!!!
OK. We know for sure the Chrysler 8 1/4" ring gear is larger than the
7.5" Dana 35's, therefore: the pinion will be longer to hole the larger
bearings, and driveshaft will have to be shorter.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/


"c" <c@operamail.com> wrote in message
news:6Qwwi.61431$rX4.41872@pd7urf2no...
>
>
> You don't know for certain?
>
>
>
>
>



--
Posted via a free Usenet account from http://www.teranews.com

 

This from the biggest loser of them all! The jealous, really jealous, I
can't believe how jealous this little draft dodging coward schizophrenic
psychopath liar hiding in Vancouver via S0106000ea6ba70e7.vn.shawcable.net
24.86.24.251 intrepidator@shaw.ca who's only way to get attention is to make
a fool of its self using foul language, like it did back in elementary
school yard. But, too afraid to use it's name and address, and take on
responsibility like a grown up. With an obsession with perverts and goats,
where it writes via remailers, @news.alt.net, and cross posts to other
perverts to no one's surprise. With extreme jealous ranting over my
documents, possessions, successes, manliness and fine, Southern California
surfing body, beard, and loving Christian family. Committing forgery over
many of my posts, proving I'm a responsible American man. You remind me of a
little rat dog, like a Mexican Chiwawa with its senseless barking, me too,
me too. You're even more senile than I first thought. And the poor thing,
you're too girlie to take responsibility for yourself again, by signing your
statement like a man.
That really thinks the group's members are so stupid not to know it's
the same coward, posting over and over again using a schizophrenic
psychopath forged up names?
You're not worth any more time when a cut and paste this same
paragraphs it fits so well!
But, now worth a forwarding to: internet.help@shaw.ca,
security@shaw.ca, abuse@shaw.ca, internet.abuse@sjrb.ca, abuse@aioe.org,
admin@***.net for forgery.
Who said it also likes baby monkeys sucking their -----, like his buddy
posted on an auto picture group at:
news:0u7g43dkje4pdkqi07hl66s8kpifo564k1@4ax.com
I thought this traitor's attacks were just over personal disagreements,
but in reality these attacks stemming from my love of God and America on
Independents Week, I realized you are actually attacking my country, and
that's what you've been doing all along is declaring your hatred for the
United States of America, with each declaration of my signature, but just
too cowardly and stupid to be a ---------. It's America, love it, or leave
it, so keep the f*ck out!
Or let me know when you cross my American border, so I may arrest you!
YOU ARE A TRAITOR and lost all rights to my American border, and
someday I'll have you in jail where you belong! Any time, I'll fly and meant
with other patriots guarding our borders against vermin like you.
Forwarded to: alt.binaries.pictures.autos,
alt.binaries.automobile.pictures groups so they may to see what an a**hole
you, aka SW really is!!!!!
OK. We know for sure the Chrysler 8 1/4" ring gear is larger than the
7.5" Dana 35's, therefore: the pinion will be longer to hole the larger
bearings, and driveshaft will have to be shorter.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/


"c" <c@operamail.com> wrote in message
news:6Qwwi.61431$rX4.41872@pd7urf2no...
>
>
> You don't know for certain?
>
>
>
>
>



--
Posted via a free Usenet account from http://www.teranews.com

 

After it's been shortened. Easily done by any speed/machine shop.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/


"bman" <brianhubley001@gmail.com> wrote in message
news:1187199694.168253.279840@r29g2000hsg.googlegr oups.com...
> My existing drive shaft will work?
>



--
Posted via a free Usenet account from http://www.teranews.com

 

After it's been shortened. Easily done by any speed/machine shop.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/


"bman" <brianhubley001@gmail.com> wrote in message
news:1187199694.168253.279840@r29g2000hsg.googlegr oups.com...
> My existing drive shaft will work?
>



--
Posted via a free Usenet account from http://www.teranews.com

 

After it's been shortened. Easily done by any speed/machine shop.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/


"bman" <brianhubley001@gmail.com> wrote in message
news:1187199694.168253.279840@r29g2000hsg.googlegr oups.com...
> My existing drive shaft will work?
>



--
Posted via a free Usenet account from http://www.teranews.com