Dana 30 spindle question
02-24-2006, 10:31 AM
#2
Guest
Posts: n/a
Re: Dana 30 spindle question
Yup. The spindle holds all the bearings including the internal axle
stub bearing.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Greg wrote:
>
> May be a stupid question for most, but haveing never worked on a front end
> of a vehicle, question is, is there a spindle on each side of an 81 CJ7 dana
> 30?
stub bearing.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Greg wrote:
>
> May be a stupid question for most, but haveing never worked on a front end
> of a vehicle, question is, is there a spindle on each side of an 81 CJ7 dana
> 30?
02-24-2006, 10:31 AM
#3
Guest
Posts: n/a
Re: Dana 30 spindle question
Yup. The spindle holds all the bearings including the internal axle
stub bearing.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Greg wrote:
>
> May be a stupid question for most, but haveing never worked on a front end
> of a vehicle, question is, is there a spindle on each side of an 81 CJ7 dana
> 30?
stub bearing.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Greg wrote:
>
> May be a stupid question for most, but haveing never worked on a front end
> of a vehicle, question is, is there a spindle on each side of an 81 CJ7 dana
> 30?
02-24-2006, 10:31 AM
#4
Guest
Posts: n/a
Re: Dana 30 spindle question
Yup. The spindle holds all the bearings including the internal axle
stub bearing.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Greg wrote:
>
> May be a stupid question for most, but haveing never worked on a front end
> of a vehicle, question is, is there a spindle on each side of an 81 CJ7 dana
> 30?
stub bearing.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Greg wrote:
>
> May be a stupid question for most, but haveing never worked on a front end
> of a vehicle, question is, is there a spindle on each side of an 81 CJ7 dana
> 30?
02-24-2006, 10:31 AM
#5
Guest
Posts: n/a
Re: Dana 30 spindle question
Yup. The spindle holds all the bearings including the internal axle
stub bearing.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Greg wrote:
>
> May be a stupid question for most, but haveing never worked on a front end
> of a vehicle, question is, is there a spindle on each side of an 81 CJ7 dana
> 30?
stub bearing.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Greg wrote:
>
> May be a stupid question for most, but haveing never worked on a front end
> of a vehicle, question is, is there a spindle on each side of an 81 CJ7 dana
> 30?
02-24-2006, 03:40 PM
#6
Guest
Posts: n/a
Re: Dana 30 spindle question
Thanks.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:43FF26EB.C9393E15@sympatico.ca...
> Yup. The spindle holds all the bearings including the internal axle
> stub bearing.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> Greg wrote:
>>
>> May be a stupid question for most, but haveing never worked on a front
>> end
>> of a vehicle, question is, is there a spindle on each side of an 81 CJ7
>> dana
>> 30?
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:43FF26EB.C9393E15@sympatico.ca...
> Yup. The spindle holds all the bearings including the internal axle
> stub bearing.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> Greg wrote:
>>
>> May be a stupid question for most, but haveing never worked on a front
>> end
>> of a vehicle, question is, is there a spindle on each side of an 81 CJ7
>> dana
>> 30?
02-24-2006, 03:40 PM
#7
Guest
Posts: n/a
Re: Dana 30 spindle question
Thanks.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:43FF26EB.C9393E15@sympatico.ca...
> Yup. The spindle holds all the bearings including the internal axle
> stub bearing.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> Greg wrote:
>>
>> May be a stupid question for most, but haveing never worked on a front
>> end
>> of a vehicle, question is, is there a spindle on each side of an 81 CJ7
>> dana
>> 30?
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:43FF26EB.C9393E15@sympatico.ca...
> Yup. The spindle holds all the bearings including the internal axle
> stub bearing.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> Greg wrote:
>>
>> May be a stupid question for most, but haveing never worked on a front
>> end
>> of a vehicle, question is, is there a spindle on each side of an 81 CJ7
>> dana
>> 30?
02-24-2006, 03:40 PM
#8
Guest
Posts: n/a
Re: Dana 30 spindle question
Thanks.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:43FF26EB.C9393E15@sympatico.ca...
> Yup. The spindle holds all the bearings including the internal axle
> stub bearing.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> Greg wrote:
>>
>> May be a stupid question for most, but haveing never worked on a front
>> end
>> of a vehicle, question is, is there a spindle on each side of an 81 CJ7
>> dana
>> 30?
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:43FF26EB.C9393E15@sympatico.ca...
> Yup. The spindle holds all the bearings including the internal axle
> stub bearing.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> Greg wrote:
>>
>> May be a stupid question for most, but haveing never worked on a front
>> end
>> of a vehicle, question is, is there a spindle on each side of an 81 CJ7
>> dana
>> 30?
02-24-2006, 03:40 PM
#9
Guest
Posts: n/a
Re: Dana 30 spindle question
Thanks.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:43FF26EB.C9393E15@sympatico.ca...
> Yup. The spindle holds all the bearings including the internal axle
> stub bearing.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> Greg wrote:
>>
>> May be a stupid question for most, but haveing never worked on a front
>> end
>> of a vehicle, question is, is there a spindle on each side of an 81 CJ7
>> dana
>> 30?
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:43FF26EB.C9393E15@sympatico.ca...
> Yup. The spindle holds all the bearings including the internal axle
> stub bearing.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> Greg wrote:
>>
>> May be a stupid question for most, but haveing never worked on a front
>> end
>> of a vehicle, question is, is there a spindle on each side of an 81 CJ7
>> dana
>> 30?
02-24-2006, 04:42 PM
#10
Guest
Posts: n/a
Re: Dana 30 spindle question
Plus other names used in your front end geometry:
http://www.----------.com/72jeepSpindle.jpg
God Bless America, Bill O|||||||O
mailto:--------------------
Greg wrote:
>
> May be a stupid question for most, but haveing never worked on a front end
> of a vehicle, question is, is there a spindle on each side of an 81 CJ7 dana
> 30?
http://www.----------.com/72jeepSpindle.jpg
God Bless America, Bill O|||||||O
mailto:--------------------
Greg wrote:
>
> May be a stupid question for most, but haveing never worked on a front end
> of a vehicle, question is, is there a spindle on each side of an 81 CJ7 dana
> 30?