Dana 25 front axle, lubricate
 

Hi

I have recently bought a M38A1 from 1960, equipped with a Rover 3.5L V8
engine.

It have Dana 25 axel in front and Dana 44 in the rear.

I'm trying to find all the places to lubricate with the greasegun but I
don't seem to find any "greasenipples" at the front axle?

Hope someone here can help me out, there are not so many old jeep's here in
Denmark


Henrik
M38A1, Rover V8

Re: Dana 25 front axle, lubricate
 

Put your glasses on. As the chart says:
http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
the steering knuckles have been converted from ninety weight oil to
grease that you will put in the fill plug to protect the axle universal
joints.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Henrik wrote:
>
> Hi
>
> I have recently bought a M38A1 from 1960, equipped with a Rover 3.5L V8
> engine.
>
> It have Dana 25 axel in front and Dana 44 in the rear.
>
> I'm trying to find all the places to lubricate with the greasegun but I
> don't seem to find any "greasenipples" at the front axle?
>
> Hope someone here can help me out, there are not so many old jeep's here in
> Denmark
>
> Henrik
> M38A1, Rover V8

Re: Dana 25 front axle, lubricate
 

Put your glasses on. As the chart says:
http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
the steering knuckles have been converted from ninety weight oil to
grease that you will put in the fill plug to protect the axle universal
joints.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Henrik wrote:
>
> Hi
>
> I have recently bought a M38A1 from 1960, equipped with a Rover 3.5L V8
> engine.
>
> It have Dana 25 axel in front and Dana 44 in the rear.
>
> I'm trying to find all the places to lubricate with the greasegun but I
> don't seem to find any "greasenipples" at the front axle?
>
> Hope someone here can help me out, there are not so many old jeep's here in
> Denmark
>
> Henrik
> M38A1, Rover V8

Re: Dana 25 front axle, lubricate
 

Put your glasses on. As the chart says:
http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
the steering knuckles have been converted from ninety weight oil to
grease that you will put in the fill plug to protect the axle universal
joints.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Henrik wrote:
>
> Hi
>
> I have recently bought a M38A1 from 1960, equipped with a Rover 3.5L V8
> engine.
>
> It have Dana 25 axel in front and Dana 44 in the rear.
>
> I'm trying to find all the places to lubricate with the greasegun but I
> don't seem to find any "greasenipples" at the front axle?
>
> Hope someone here can help me out, there are not so many old jeep's here in
> Denmark
>
> Henrik
> M38A1, Rover V8

Re: Dana 25 front axle, lubricate
 

Put your glasses on. As the chart says:
http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
the steering knuckles have been converted from ninety weight oil to
grease that you will put in the fill plug to protect the axle universal
joints.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Henrik wrote:
>
> Hi
>
> I have recently bought a M38A1 from 1960, equipped with a Rover 3.5L V8
> engine.
>
> It have Dana 25 axel in front and Dana 44 in the rear.
>
> I'm trying to find all the places to lubricate with the greasegun but I
> don't seem to find any "greasenipples" at the front axle?
>
> Hope someone here can help me out, there are not so many old jeep's here in
> Denmark
>
> Henrik
> M38A1, Rover V8

Re: Dana 25 front axle, lubricate
 

"L.W. (ßill) ------ III" <----------@cox.net> wrote in message
news:40AFAD51.33CCC780@cox.net...
> Put your glasses on. As the chart says:
>
http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
> the steering knuckles have been converted from ninety weight oil to
> grease that you will put in the fill plug to protect the axle universal
> joints.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>

Ok, I found the fill plug, thank you for the excellent link, that lead me to
even more information about lubricants used in the steering knuckles.

Now that I was looking at the front axle I found another possible fill plug?
It is a bolt, looks like about 6mm, fitted in the axle about 15cm from the
steering knuckles, in an angle of maybe 15 degrees.
Any idea what these bolts do?

Henrik
M38A1, Rover V8

Re: Dana 25 front axle, lubricate
 

"L.W. (ßill) ------ III" <----------@cox.net> wrote in message
news:40AFAD51.33CCC780@cox.net...
> Put your glasses on. As the chart says:
>
http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
> the steering knuckles have been converted from ninety weight oil to
> grease that you will put in the fill plug to protect the axle universal
> joints.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>

Ok, I found the fill plug, thank you for the excellent link, that lead me to
even more information about lubricants used in the steering knuckles.

Now that I was looking at the front axle I found another possible fill plug?
It is a bolt, looks like about 6mm, fitted in the axle about 15cm from the
steering knuckles, in an angle of maybe 15 degrees.
Any idea what these bolts do?

Henrik
M38A1, Rover V8

Re: Dana 25 front axle, lubricate
 

"L.W. (ßill) ------ III" <----------@cox.net> wrote in message
news:40AFAD51.33CCC780@cox.net...
> Put your glasses on. As the chart says:
>
http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
> the steering knuckles have been converted from ninety weight oil to
> grease that you will put in the fill plug to protect the axle universal
> joints.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>

Ok, I found the fill plug, thank you for the excellent link, that lead me to
even more information about lubricants used in the steering knuckles.

Now that I was looking at the front axle I found another possible fill plug?
It is a bolt, looks like about 6mm, fitted in the axle about 15cm from the
steering knuckles, in an angle of maybe 15 degrees.
Any idea what these bolts do?

Henrik
M38A1, Rover V8

Re: Dana 25 front axle, lubricate
 

"L.W. (ßill) ------ III" <----------@cox.net> wrote in message
news:40AFAD51.33CCC780@cox.net...
> Put your glasses on. As the chart says:
>
http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
> the steering knuckles have been converted from ninety weight oil to
> grease that you will put in the fill plug to protect the axle universal
> joints.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>

Ok, I found the fill plug, thank you for the excellent link, that lead me to
even more information about lubricants used in the steering knuckles.

Now that I was looking at the front axle I found another possible fill plug?
It is a bolt, looks like about 6mm, fitted in the axle about 15cm from the
steering knuckles, in an angle of maybe 15 degrees.
Any idea what these bolts do?

Henrik
M38A1, Rover V8

Re: Dana 25 front axle, lubricate
 

Hi Henrik,
Fifteen degrees from vertical may be the breather, that maybe the
hose fell off. Maybe you can tell me what's it's near in this exploded
view: http://----------.com/dana30/axleparts.pdf
God Bless America, ßill O|||||||O
mailto:--------------------

Henrik wrote:
>
> "L.W. (ßill) ------ III" <----------@cox.net> wrote in message
> news:40AFAD51.33CCC780@cox.net...
> > Put your glasses on. As the chart says:
> >
> http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
> > the steering knuckles have been converted from ninety weight oil to
> > grease that you will put in the fill plug to protect the axle universal
> > joints.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
>
> Ok, I found the fill plug, thank you for the excellent link, that lead me to
> even more information about lubricants used in the steering knuckles.
>
> Now that I was looking at the front axle I found another possible fill plug?
> It is a bolt, looks like about 6mm, fitted in the axle about 15cm from the
> steering knuckles, in an angle of maybe 15 degrees.
> Any idea what these bolts do?
>
> Henrik
> M38A1, Rover V8

Re: Dana 25 front axle, lubricate
 

Hi Henrik,
Fifteen degrees from vertical may be the breather, that maybe the
hose fell off. Maybe you can tell me what's it's near in this exploded
view: http://----------.com/dana30/axleparts.pdf
God Bless America, ßill O|||||||O
mailto:--------------------

Henrik wrote:
>
> "L.W. (ßill) ------ III" <----------@cox.net> wrote in message
> news:40AFAD51.33CCC780@cox.net...
> > Put your glasses on. As the chart says:
> >
> http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
> > the steering knuckles have been converted from ninety weight oil to
> > grease that you will put in the fill plug to protect the axle universal
> > joints.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
>
> Ok, I found the fill plug, thank you for the excellent link, that lead me to
> even more information about lubricants used in the steering knuckles.
>
> Now that I was looking at the front axle I found another possible fill plug?
> It is a bolt, looks like about 6mm, fitted in the axle about 15cm from the
> steering knuckles, in an angle of maybe 15 degrees.
> Any idea what these bolts do?
>
> Henrik
> M38A1, Rover V8

Re: Dana 25 front axle, lubricate
 

Hi Henrik,
Fifteen degrees from vertical may be the breather, that maybe the
hose fell off. Maybe you can tell me what's it's near in this exploded
view: http://----------.com/dana30/axleparts.pdf
God Bless America, ßill O|||||||O
mailto:--------------------

Henrik wrote:
>
> "L.W. (ßill) ------ III" <----------@cox.net> wrote in message
> news:40AFAD51.33CCC780@cox.net...
> > Put your glasses on. As the chart says:
> >
> http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
> > the steering knuckles have been converted from ninety weight oil to
> > grease that you will put in the fill plug to protect the axle universal
> > joints.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
>
> Ok, I found the fill plug, thank you for the excellent link, that lead me to
> even more information about lubricants used in the steering knuckles.
>
> Now that I was looking at the front axle I found another possible fill plug?
> It is a bolt, looks like about 6mm, fitted in the axle about 15cm from the
> steering knuckles, in an angle of maybe 15 degrees.
> Any idea what these bolts do?
>
> Henrik
> M38A1, Rover V8

Re: Dana 25 front axle, lubricate
 

Hi Henrik,
Fifteen degrees from vertical may be the breather, that maybe the
hose fell off. Maybe you can tell me what's it's near in this exploded
view: http://----------.com/dana30/axleparts.pdf
God Bless America, ßill O|||||||O
mailto:--------------------

Henrik wrote:
>
> "L.W. (ßill) ------ III" <----------@cox.net> wrote in message
> news:40AFAD51.33CCC780@cox.net...
> > Put your glasses on. As the chart says:
> >
> http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
> > the steering knuckles have been converted from ninety weight oil to
> > grease that you will put in the fill plug to protect the axle universal
> > joints.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
>
> Ok, I found the fill plug, thank you for the excellent link, that lead me to
> even more information about lubricants used in the steering knuckles.
>
> Now that I was looking at the front axle I found another possible fill plug?
> It is a bolt, looks like about 6mm, fitted in the axle about 15cm from the
> steering knuckles, in an angle of maybe 15 degrees.
> Any idea what these bolts do?
>
> Henrik
> M38A1, Rover V8

Re: Dana 25 front axle, lubricate
 

Hi Bill

Hard to explain precesily where the bolts are located but tomorrow I will
try to take a decent picture, maybe that wil solve the mystery.

Henrik


"L.W. (ßill) ------ III" <----------@cox.net> wrote in message
news:40B10857.284CEE1F@cox.net...
> Hi Henrik,
> Fifteen degrees from vertical may be the breather, that maybe the
> hose fell off. Maybe you can tell me what's it's near in this exploded
> view: http://----------.com/dana30/axleparts.pdf
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Henrik wrote:
> >
> > "L.W. (ßill) ------ III" <----------@cox.net> wrote in message
> > news:40AFAD51.33CCC780@cox.net...
> > > Put your glasses on. As the chart says:
> > >
> >
http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
> > > the steering knuckles have been converted from ninety weight oil to
> > > grease that you will put in the fill plug to protect the axle
universal
> > > joints.
> > > God Bless America, ßill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> >
> > Ok, I found the fill plug, thank you for the excellent link, that lead
me to
> > even more information about lubricants used in the steering knuckles.
> >
> > Now that I was looking at the front axle I found another possible fill
plug?
> > It is a bolt, looks like about 6mm, fitted in the axle about 15cm from
the
> > steering knuckles, in an angle of maybe 15 degrees.
> > Any idea what these bolts do?
> >
> > Henrik
> > M38A1, Rover V8

Re: Dana 25 front axle, lubricate
 

Hi Bill

Hard to explain precesily where the bolts are located but tomorrow I will
try to take a decent picture, maybe that wil solve the mystery.

Henrik


"L.W. (ßill) ------ III" <----------@cox.net> wrote in message
news:40B10857.284CEE1F@cox.net...
> Hi Henrik,
> Fifteen degrees from vertical may be the breather, that maybe the
> hose fell off. Maybe you can tell me what's it's near in this exploded
> view: http://----------.com/dana30/axleparts.pdf
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Henrik wrote:
> >
> > "L.W. (ßill) ------ III" <----------@cox.net> wrote in message
> > news:40AFAD51.33CCC780@cox.net...
> > > Put your glasses on. As the chart says:
> > >
> >
http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
> > > the steering knuckles have been converted from ninety weight oil to
> > > grease that you will put in the fill plug to protect the axle
universal
> > > joints.
> > > God Bless America, ßill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> >
> > Ok, I found the fill plug, thank you for the excellent link, that lead
me to
> > even more information about lubricants used in the steering knuckles.
> >
> > Now that I was looking at the front axle I found another possible fill
plug?
> > It is a bolt, looks like about 6mm, fitted in the axle about 15cm from
the
> > steering knuckles, in an angle of maybe 15 degrees.
> > Any idea what these bolts do?
> >
> > Henrik
> > M38A1, Rover V8

Re: Dana 25 front axle, lubricate
 

Hi Bill

Hard to explain precesily where the bolts are located but tomorrow I will
try to take a decent picture, maybe that wil solve the mystery.

Henrik


"L.W. (ßill) ------ III" <----------@cox.net> wrote in message
news:40B10857.284CEE1F@cox.net...
> Hi Henrik,
> Fifteen degrees from vertical may be the breather, that maybe the
> hose fell off. Maybe you can tell me what's it's near in this exploded
> view: http://----------.com/dana30/axleparts.pdf
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Henrik wrote:
> >
> > "L.W. (ßill) ------ III" <----------@cox.net> wrote in message
> > news:40AFAD51.33CCC780@cox.net...
> > > Put your glasses on. As the chart says:
> > >
> >
http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
> > > the steering knuckles have been converted from ninety weight oil to
> > > grease that you will put in the fill plug to protect the axle
universal
> > > joints.
> > > God Bless America, ßill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> >
> > Ok, I found the fill plug, thank you for the excellent link, that lead
me to
> > even more information about lubricants used in the steering knuckles.
> >
> > Now that I was looking at the front axle I found another possible fill
plug?
> > It is a bolt, looks like about 6mm, fitted in the axle about 15cm from
the
> > steering knuckles, in an angle of maybe 15 degrees.
> > Any idea what these bolts do?
> >
> > Henrik
> > M38A1, Rover V8

Re: Dana 25 front axle, lubricate
 

Hi Bill

Hard to explain precesily where the bolts are located but tomorrow I will
try to take a decent picture, maybe that wil solve the mystery.

Henrik


"L.W. (ßill) ------ III" <----------@cox.net> wrote in message
news:40B10857.284CEE1F@cox.net...
> Hi Henrik,
> Fifteen degrees from vertical may be the breather, that maybe the
> hose fell off. Maybe you can tell me what's it's near in this exploded
> view: http://----------.com/dana30/axleparts.pdf
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Henrik wrote:
> >
> > "L.W. (ßill) ------ III" <----------@cox.net> wrote in message
> > news:40AFAD51.33CCC780@cox.net...
> > > Put your glasses on. As the chart says:
> > >
> >
http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
> > > the steering knuckles have been converted from ninety weight oil to
> > > grease that you will put in the fill plug to protect the axle
universal
> > > joints.
> > > God Bless America, ßill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> >
> > Ok, I found the fill plug, thank you for the excellent link, that lead
me to
> > even more information about lubricants used in the steering knuckles.
> >
> > Now that I was looking at the front axle I found another possible fill
plug?
> > It is a bolt, looks like about 6mm, fitted in the axle about 15cm from
the
> > steering knuckles, in an angle of maybe 15 degrees.
> > Any idea what these bolts do?
> >
> > Henrik
> > M38A1, Rover V8

Re: Dana 25 front axle, lubricate
 

Now I finaly managed to get the photo taken.
The green arrow indicates the grease fill plug if I have understood you
right and the red circle indicates the bolt that I don't know what to do
with.

http://www.gsx.dk/jeep/axle_1.jpg
http://www.gsx.dk/jeep/axle_2.jpg

Thanks for all your help


Henrik



"Henrik" <hbl@12move.dk> wrote in message
news:c9048d$1aku$1@news.cybercity.dk...
> Hi Bill
>
> Hard to explain precesily where the bolts are located but tomorrow I will
> try to take a decent picture, maybe that wil solve the mystery.
>
> Henrik
>

Re: Dana 25 front axle, lubricate
 

Now I finaly managed to get the photo taken.
The green arrow indicates the grease fill plug if I have understood you
right and the red circle indicates the bolt that I don't know what to do
with.

http://www.gsx.dk/jeep/axle_1.jpg
http://www.gsx.dk/jeep/axle_2.jpg

Thanks for all your help


Henrik



"Henrik" <hbl@12move.dk> wrote in message
news:c9048d$1aku$1@news.cybercity.dk...
> Hi Bill
>
> Hard to explain precesily where the bolts are located but tomorrow I will
> try to take a decent picture, maybe that wil solve the mystery.
>
> Henrik
>

Re: Dana 25 front axle, lubricate
 

Now I finaly managed to get the photo taken.
The green arrow indicates the grease fill plug if I have understood you
right and the red circle indicates the bolt that I don't know what to do
with.

http://www.gsx.dk/jeep/axle_1.jpg
http://www.gsx.dk/jeep/axle_2.jpg

Thanks for all your help


Henrik



"Henrik" <hbl@12move.dk> wrote in message
news:c9048d$1aku$1@news.cybercity.dk...
> Hi Bill
>
> Hard to explain precesily where the bolts are located but tomorrow I will
> try to take a decent picture, maybe that wil solve the mystery.
>
> Henrik
>

Re: Dana 25 front axle, lubricate
 

Now I finaly managed to get the photo taken.
The green arrow indicates the grease fill plug if I have understood you
right and the red circle indicates the bolt that I don't know what to do
with.

http://www.gsx.dk/jeep/axle_1.jpg
http://www.gsx.dk/jeep/axle_2.jpg

Thanks for all your help


Henrik



"Henrik" <hbl@12move.dk> wrote in message
news:c9048d$1aku$1@news.cybercity.dk...
> Hi Bill
>
> Hard to explain precesily where the bolts are located but tomorrow I will
> try to take a decent picture, maybe that wil solve the mystery.
>
> Henrik
>

Re: Dana 25 front axle, lubricate
 

Hi Henrik,
That's just an adjustment to stop the steering knuckle from turning
further, to keep the tire from rubbing the spring.
Here's another lubrication chart you might like, it shows and
suggests how much to fill the rear axle wheel bearings:
http://www.film.queensu.ca/CJ3B/Phot...tUniversal.gif
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Henrik wrote:
>
> Now I finaly managed to get the photo taken.
> The green arrow indicates the grease fill plug if I have understood you
> right and the red circle indicates the bolt that I don't know what to do
> with.
>
> http://www.gsx.dk/jeep/axle_1.jpg
> http://www.gsx.dk/jeep/axle_2.jpg
>
> Thanks for all your help
>
> Henrik
>
> "Henrik" <hbl@12move.dk> wrote in message
> news:c9048d$1aku$1@news.cybercity.dk...
> > Hi Bill
> >
> > Hard to explain precesily where the bolts are located but tomorrow I will
> > try to take a decent picture, maybe that wil solve the mystery.
> >
> > Henrik
> >

Re: Dana 25 front axle, lubricate
 

Hi Henrik,
That's just an adjustment to stop the steering knuckle from turning
further, to keep the tire from rubbing the spring.
Here's another lubrication chart you might like, it shows and
suggests how much to fill the rear axle wheel bearings:
http://www.film.queensu.ca/CJ3B/Phot...tUniversal.gif
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Henrik wrote:
>
> Now I finaly managed to get the photo taken.
> The green arrow indicates the grease fill plug if I have understood you
> right and the red circle indicates the bolt that I don't know what to do
> with.
>
> http://www.gsx.dk/jeep/axle_1.jpg
> http://www.gsx.dk/jeep/axle_2.jpg
>
> Thanks for all your help
>
> Henrik
>
> "Henrik" <hbl@12move.dk> wrote in message
> news:c9048d$1aku$1@news.cybercity.dk...
> > Hi Bill
> >
> > Hard to explain precesily where the bolts are located but tomorrow I will
> > try to take a decent picture, maybe that wil solve the mystery.
> >
> > Henrik
> >

Re: Dana 25 front axle, lubricate
 

Hi Henrik,
That's just an adjustment to stop the steering knuckle from turning
further, to keep the tire from rubbing the spring.
Here's another lubrication chart you might like, it shows and
suggests how much to fill the rear axle wheel bearings:
http://www.film.queensu.ca/CJ3B/Phot...tUniversal.gif
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Henrik wrote:
>
> Now I finaly managed to get the photo taken.
> The green arrow indicates the grease fill plug if I have understood you
> right and the red circle indicates the bolt that I don't know what to do
> with.
>
> http://www.gsx.dk/jeep/axle_1.jpg
> http://www.gsx.dk/jeep/axle_2.jpg
>
> Thanks for all your help
>
> Henrik
>
> "Henrik" <hbl@12move.dk> wrote in message
> news:c9048d$1aku$1@news.cybercity.dk...
> > Hi Bill
> >
> > Hard to explain precesily where the bolts are located but tomorrow I will
> > try to take a decent picture, maybe that wil solve the mystery.
> >
> > Henrik
> >

Re: Dana 25 front axle, lubricate
 

Hi Henrik,
That's just an adjustment to stop the steering knuckle from turning
further, to keep the tire from rubbing the spring.
Here's another lubrication chart you might like, it shows and
suggests how much to fill the rear axle wheel bearings:
http://www.film.queensu.ca/CJ3B/Phot...tUniversal.gif
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Henrik wrote:
>
> Now I finaly managed to get the photo taken.
> The green arrow indicates the grease fill plug if I have understood you
> right and the red circle indicates the bolt that I don't know what to do
> with.
>
> http://www.gsx.dk/jeep/axle_1.jpg
> http://www.gsx.dk/jeep/axle_2.jpg
>
> Thanks for all your help
>
> Henrik
>
> "Henrik" <hbl@12move.dk> wrote in message
> news:c9048d$1aku$1@news.cybercity.dk...
> > Hi Bill
> >
> > Hard to explain precesily where the bolts are located but tomorrow I will
> > try to take a decent picture, maybe that wil solve the mystery.
> >
> > Henrik
> >

Re: Dana 25 front axle, lubricate
 

Interesting engine swap. Bet it goes quite well ! FWIW, if you blow a head
gasket, dont use the tin Rover replacement ones; but get the composite ones
from a 61-63 Buick which will fit nicely.

Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ

"Henrik" <hbl@12move.dk> wrote in message
news:c8o76p$2509$1@news.cybercity.dk...
> Hi
>
> I have recently bought a M38A1 from 1960, equipped with a Rover 3.5L V8
> engine.
>
> It have Dana 25 axel in front and Dana 44 in the rear.
>
> I'm trying to find all the places to lubricate with the greasegun but I
> don't seem to find any "greasenipples" at the front axle?
>
> Hope someone here can help me out, there are not so many old jeep's here
in
> Denmark
>
>
> Henrik
> M38A1, Rover V8
>
>
>
>

Re: Dana 25 front axle, lubricate
 

Interesting engine swap. Bet it goes quite well ! FWIW, if you blow a head
gasket, dont use the tin Rover replacement ones; but get the composite ones
from a 61-63 Buick which will fit nicely.

Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ

"Henrik" <hbl@12move.dk> wrote in message
news:c8o76p$2509$1@news.cybercity.dk...
> Hi
>
> I have recently bought a M38A1 from 1960, equipped with a Rover 3.5L V8
> engine.
>
> It have Dana 25 axel in front and Dana 44 in the rear.
>
> I'm trying to find all the places to lubricate with the greasegun but I
> don't seem to find any "greasenipples" at the front axle?
>
> Hope someone here can help me out, there are not so many old jeep's here
in
> Denmark
>
>
> Henrik
> M38A1, Rover V8
>
>
>
>

Re: Dana 25 front axle, lubricate
 

Interesting engine swap. Bet it goes quite well ! FWIW, if you blow a head
gasket, dont use the tin Rover replacement ones; but get the composite ones
from a 61-63 Buick which will fit nicely.

Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ

"Henrik" <hbl@12move.dk> wrote in message
news:c8o76p$2509$1@news.cybercity.dk...
> Hi
>
> I have recently bought a M38A1 from 1960, equipped with a Rover 3.5L V8
> engine.
>
> It have Dana 25 axel in front and Dana 44 in the rear.
>
> I'm trying to find all the places to lubricate with the greasegun but I
> don't seem to find any "greasenipples" at the front axle?
>
> Hope someone here can help me out, there are not so many old jeep's here
in
> Denmark
>
>
> Henrik
> M38A1, Rover V8
>
>
>
>

Re: Dana 25 front axle, lubricate
 

Interesting engine swap. Bet it goes quite well ! FWIW, if you blow a head
gasket, dont use the tin Rover replacement ones; but get the composite ones
from a 61-63 Buick which will fit nicely.

Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ

"Henrik" <hbl@12move.dk> wrote in message
news:c8o76p$2509$1@news.cybercity.dk...
> Hi
>
> I have recently bought a M38A1 from 1960, equipped with a Rover 3.5L V8
> engine.
>
> It have Dana 25 axel in front and Dana 44 in the rear.
>
> I'm trying to find all the places to lubricate with the greasegun but I
> don't seem to find any "greasenipples" at the front axle?
>
> Hope someone here can help me out, there are not so many old jeep's here
in
> Denmark
>
>
> Henrik
> M38A1, Rover V8
>
>
>
>