Crunched Fender Ideas
09-16-2004, 07:02 AM
#31
Guest
Posts: n/a
Re: Crunched Fender Ideas
ROTFLMFAO......
I honestly never gave it any thought...LOL
John and I were the only two vehicles on the trail that day and we only had
two eyes between us....
That was a good one Steve.... 1I4X4 Club.... it might be kool to start one
just for kicks ...lol
Oh Yeah! Chicks dig body damage!!! Those are the girls from BC... The one
on the left has an Electric Lime Green Rubi
BTW...was out last night with Eric Germain lookin' at Slippery Creek and
some of those other trails out Nictaux way...those Right Coast Krawlers sure
build some nice trails...
I think it was u that I saw pics of out there in the spring...
and last all....Eric is going to fabricate my new flatties, but need design
plans/pics.... looks like the new Jeep is about to start the hardcore mods
hehehe
"Steve" <xjlifter@bogus.com> wrote in message
news:Ef92d.68372$vO1.357656@nnrp1.uunet.ca...
> Leave it like it is. The girls obviously dig it:
>
> http://tinyurl.com/5hcsm
>
> Steve
> http://xjeep.dyndns.org
>
>
> Jeff wrote:
>
> > I was letting the Jeep pull me along in 2nd gear with no gas while
> > straddling some ruts.. I then saw a tree coming ahead and pulled closer
to
> > the ruts to get around the tree and just as I was going around it my
rear
> > wheels fell into the rut sending my fender directly into the
tree...CRUNCH!
> > completely righting off the fender and then some at only, maybe 2 mph...
> >
> > now here it is... The Jeep is almost new...2003 still stock other than
skids
> > and 31" mudders.
> >
> > What would you do??
I honestly never gave it any thought...LOL
John and I were the only two vehicles on the trail that day and we only had
two eyes between us....
That was a good one Steve.... 1I4X4 Club.... it might be kool to start one
just for kicks ...lol
Oh Yeah! Chicks dig body damage!!! Those are the girls from BC... The one
on the left has an Electric Lime Green Rubi
BTW...was out last night with Eric Germain lookin' at Slippery Creek and
some of those other trails out Nictaux way...those Right Coast Krawlers sure
build some nice trails...
I think it was u that I saw pics of out there in the spring...
and last all....Eric is going to fabricate my new flatties, but need design
plans/pics.... looks like the new Jeep is about to start the hardcore mods
hehehe
"Steve" <xjlifter@bogus.com> wrote in message
news:Ef92d.68372$vO1.357656@nnrp1.uunet.ca...
> Leave it like it is. The girls obviously dig it:
>
> http://tinyurl.com/5hcsm
>
> Steve
> http://xjeep.dyndns.org
>
>
> Jeff wrote:
>
> > I was letting the Jeep pull me along in 2nd gear with no gas while
> > straddling some ruts.. I then saw a tree coming ahead and pulled closer
to
> > the ruts to get around the tree and just as I was going around it my
rear
> > wheels fell into the rut sending my fender directly into the
tree...CRUNCH!
> > completely righting off the fender and then some at only, maybe 2 mph...
> >
> > now here it is... The Jeep is almost new...2003 still stock other than
skids
> > and 31" mudders.
> >
> > What would you do??
09-16-2004, 10:21 AM
#32
Guest
Posts: n/a
Re: Crunched Fender Ideas
Sorry I've gotten in on this thread late.
I "doinked" both of the front fenders on my '94 YJ from underneath during ou
Rubicon trail run last month. (Front tires hit the undersides of the fenders
which are fitted with TJ flares...bump stops too short.) I also managed to
scrape the right front on a major rock wall when I slid slightly to the
right going over a nasty obstacle.
Anyway, I've wanted to "flatfender" the YJ for a couple of years, but wasn't
sure how to go about it. I've seen quite a few "hacksaw" jobs on TJs & YJs
around here that frankly look like Hell. The only kits I've seen are by Rev1
and Poison Spyder, with the latter looking a lot better and appearing to be
quite stout. Only issue I have with them is they have a decided "unfinished"
look even when painted.
So anyway I went ahead and ordered the Poison Spyder tube fenders. The tabs
for the radiator support area got a bit "doinked" in shipment but can be
easily straightened when fitting. They are stout as Hell and all the
measurements I've made so far indicate they will bolt right up, not that
they'll be easy to install. There's a good deal of cuttting involved in
removing the outer fender skins. Not sure this is for someone like me with
minimal body work experience. Also, PS claims there's no need to make any
vertical cuts through the inner fender at the radiator support or at the
firewall. Despite this, I see numerous spot welds holding the stuff
together, not sure how these are to be separated.
FWIW, I got the ones without the 3" added flare, not sure what these will be
like in mud, etc., but I plan to carry a spare set of wiper blades and a
squeegee! Will reorrt after they're fitted.
"Jeff" <jrhiltz@av.eastlink.ca> wrote in message
news:bpe2d.68407$vO1.357772@nnrp1.uunet.ca...
> ROTFLMFAO......
> I honestly never gave it any thought...LOL
> John and I were the only two vehicles on the trail that day and we only
> had
> two eyes between us....
> That was a good one Steve.... 1I4X4 Club.... it might be kool to start
> one
> just for kicks ...lol
>
> Oh Yeah! Chicks dig body damage!!! Those are the girls from BC... The
> one
> on the left has an Electric Lime Green Rubi
>
> BTW...was out last night with Eric Germain lookin' at Slippery Creek and
> some of those other trails out Nictaux way...those Right Coast Krawlers
> sure
> build some nice trails...
> I think it was u that I saw pics of out there in the spring...
>
> and last all....Eric is going to fabricate my new flatties, but need
> design
> plans/pics.... looks like the new Jeep is about to start the hardcore mods
> hehehe
> "Steve" <xjlifter@bogus.com> wrote in message
> news:Ef92d.68372$vO1.357656@nnrp1.uunet.ca...
>> Leave it like it is. The girls obviously dig it:
>>
>> http://tinyurl.com/5hcsm
>>
>> Steve
>> http://xjeep.dyndns.org
>>
>>
>> Jeff wrote:
>>
>> > I was letting the Jeep pull me along in 2nd gear with no gas while
>> > straddling some ruts.. I then saw a tree coming ahead and pulled closer
> to
>> > the ruts to get around the tree and just as I was going around it my
> rear
>> > wheels fell into the rut sending my fender directly into the
> tree...CRUNCH!
>> > completely righting off the fender and then some at only, maybe 2
>> > mph...
>> >
>> > now here it is... The Jeep is almost new...2003 still stock other than
> skids
>> > and 31" mudders.
>> >
>> > What would you do??
>
>
I "doinked" both of the front fenders on my '94 YJ from underneath during ou
Rubicon trail run last month. (Front tires hit the undersides of the fenders
which are fitted with TJ flares...bump stops too short.) I also managed to
scrape the right front on a major rock wall when I slid slightly to the
right going over a nasty obstacle.
Anyway, I've wanted to "flatfender" the YJ for a couple of years, but wasn't
sure how to go about it. I've seen quite a few "hacksaw" jobs on TJs & YJs
around here that frankly look like Hell. The only kits I've seen are by Rev1
and Poison Spyder, with the latter looking a lot better and appearing to be
quite stout. Only issue I have with them is they have a decided "unfinished"
look even when painted.
So anyway I went ahead and ordered the Poison Spyder tube fenders. The tabs
for the radiator support area got a bit "doinked" in shipment but can be
easily straightened when fitting. They are stout as Hell and all the
measurements I've made so far indicate they will bolt right up, not that
they'll be easy to install. There's a good deal of cuttting involved in
removing the outer fender skins. Not sure this is for someone like me with
minimal body work experience. Also, PS claims there's no need to make any
vertical cuts through the inner fender at the radiator support or at the
firewall. Despite this, I see numerous spot welds holding the stuff
together, not sure how these are to be separated.
FWIW, I got the ones without the 3" added flare, not sure what these will be
like in mud, etc., but I plan to carry a spare set of wiper blades and a
squeegee! Will reorrt after they're fitted.
"Jeff" <jrhiltz@av.eastlink.ca> wrote in message
news:bpe2d.68407$vO1.357772@nnrp1.uunet.ca...
> ROTFLMFAO......
> I honestly never gave it any thought...LOL
> John and I were the only two vehicles on the trail that day and we only
> had
> two eyes between us....
> That was a good one Steve.... 1I4X4 Club.... it might be kool to start
> one
> just for kicks ...lol
>
> Oh Yeah! Chicks dig body damage!!! Those are the girls from BC... The
> one
> on the left has an Electric Lime Green Rubi
>
> BTW...was out last night with Eric Germain lookin' at Slippery Creek and
> some of those other trails out Nictaux way...those Right Coast Krawlers
> sure
> build some nice trails...
> I think it was u that I saw pics of out there in the spring...
>
> and last all....Eric is going to fabricate my new flatties, but need
> design
> plans/pics.... looks like the new Jeep is about to start the hardcore mods
> hehehe
> "Steve" <xjlifter@bogus.com> wrote in message
> news:Ef92d.68372$vO1.357656@nnrp1.uunet.ca...
>> Leave it like it is. The girls obviously dig it:
>>
>> http://tinyurl.com/5hcsm
>>
>> Steve
>> http://xjeep.dyndns.org
>>
>>
>> Jeff wrote:
>>
>> > I was letting the Jeep pull me along in 2nd gear with no gas while
>> > straddling some ruts.. I then saw a tree coming ahead and pulled closer
> to
>> > the ruts to get around the tree and just as I was going around it my
> rear
>> > wheels fell into the rut sending my fender directly into the
> tree...CRUNCH!
>> > completely righting off the fender and then some at only, maybe 2
>> > mph...
>> >
>> > now here it is... The Jeep is almost new...2003 still stock other than
> skids
>> > and 31" mudders.
>> >
>> > What would you do??
>
>
09-16-2004, 10:21 AM
#33
Guest
Posts: n/a
Re: Crunched Fender Ideas
Sorry I've gotten in on this thread late.
I "doinked" both of the front fenders on my '94 YJ from underneath during ou
Rubicon trail run last month. (Front tires hit the undersides of the fenders
which are fitted with TJ flares...bump stops too short.) I also managed to
scrape the right front on a major rock wall when I slid slightly to the
right going over a nasty obstacle.
Anyway, I've wanted to "flatfender" the YJ for a couple of years, but wasn't
sure how to go about it. I've seen quite a few "hacksaw" jobs on TJs & YJs
around here that frankly look like Hell. The only kits I've seen are by Rev1
and Poison Spyder, with the latter looking a lot better and appearing to be
quite stout. Only issue I have with them is they have a decided "unfinished"
look even when painted.
So anyway I went ahead and ordered the Poison Spyder tube fenders. The tabs
for the radiator support area got a bit "doinked" in shipment but can be
easily straightened when fitting. They are stout as Hell and all the
measurements I've made so far indicate they will bolt right up, not that
they'll be easy to install. There's a good deal of cuttting involved in
removing the outer fender skins. Not sure this is for someone like me with
minimal body work experience. Also, PS claims there's no need to make any
vertical cuts through the inner fender at the radiator support or at the
firewall. Despite this, I see numerous spot welds holding the stuff
together, not sure how these are to be separated.
FWIW, I got the ones without the 3" added flare, not sure what these will be
like in mud, etc., but I plan to carry a spare set of wiper blades and a
squeegee! Will reorrt after they're fitted.
"Jeff" <jrhiltz@av.eastlink.ca> wrote in message
news:bpe2d.68407$vO1.357772@nnrp1.uunet.ca...
> ROTFLMFAO......
> I honestly never gave it any thought...LOL
> John and I were the only two vehicles on the trail that day and we only
> had
> two eyes between us....
> That was a good one Steve.... 1I4X4 Club.... it might be kool to start
> one
> just for kicks ...lol
>
> Oh Yeah! Chicks dig body damage!!! Those are the girls from BC... The
> one
> on the left has an Electric Lime Green Rubi
>
> BTW...was out last night with Eric Germain lookin' at Slippery Creek and
> some of those other trails out Nictaux way...those Right Coast Krawlers
> sure
> build some nice trails...
> I think it was u that I saw pics of out there in the spring...
>
> and last all....Eric is going to fabricate my new flatties, but need
> design
> plans/pics.... looks like the new Jeep is about to start the hardcore mods
> hehehe
> "Steve" <xjlifter@bogus.com> wrote in message
> news:Ef92d.68372$vO1.357656@nnrp1.uunet.ca...
>> Leave it like it is. The girls obviously dig it:
>>
>> http://tinyurl.com/5hcsm
>>
>> Steve
>> http://xjeep.dyndns.org
>>
>>
>> Jeff wrote:
>>
>> > I was letting the Jeep pull me along in 2nd gear with no gas while
>> > straddling some ruts.. I then saw a tree coming ahead and pulled closer
> to
>> > the ruts to get around the tree and just as I was going around it my
> rear
>> > wheels fell into the rut sending my fender directly into the
> tree...CRUNCH!
>> > completely righting off the fender and then some at only, maybe 2
>> > mph...
>> >
>> > now here it is... The Jeep is almost new...2003 still stock other than
> skids
>> > and 31" mudders.
>> >
>> > What would you do??
>
>
I "doinked" both of the front fenders on my '94 YJ from underneath during ou
Rubicon trail run last month. (Front tires hit the undersides of the fenders
which are fitted with TJ flares...bump stops too short.) I also managed to
scrape the right front on a major rock wall when I slid slightly to the
right going over a nasty obstacle.
Anyway, I've wanted to "flatfender" the YJ for a couple of years, but wasn't
sure how to go about it. I've seen quite a few "hacksaw" jobs on TJs & YJs
around here that frankly look like Hell. The only kits I've seen are by Rev1
and Poison Spyder, with the latter looking a lot better and appearing to be
quite stout. Only issue I have with them is they have a decided "unfinished"
look even when painted.
So anyway I went ahead and ordered the Poison Spyder tube fenders. The tabs
for the radiator support area got a bit "doinked" in shipment but can be
easily straightened when fitting. They are stout as Hell and all the
measurements I've made so far indicate they will bolt right up, not that
they'll be easy to install. There's a good deal of cuttting involved in
removing the outer fender skins. Not sure this is for someone like me with
minimal body work experience. Also, PS claims there's no need to make any
vertical cuts through the inner fender at the radiator support or at the
firewall. Despite this, I see numerous spot welds holding the stuff
together, not sure how these are to be separated.
FWIW, I got the ones without the 3" added flare, not sure what these will be
like in mud, etc., but I plan to carry a spare set of wiper blades and a
squeegee! Will reorrt after they're fitted.
"Jeff" <jrhiltz@av.eastlink.ca> wrote in message
news:bpe2d.68407$vO1.357772@nnrp1.uunet.ca...
> ROTFLMFAO......
> I honestly never gave it any thought...LOL
> John and I were the only two vehicles on the trail that day and we only
> had
> two eyes between us....
> That was a good one Steve.... 1I4X4 Club.... it might be kool to start
> one
> just for kicks ...lol
>
> Oh Yeah! Chicks dig body damage!!! Those are the girls from BC... The
> one
> on the left has an Electric Lime Green Rubi
>
> BTW...was out last night with Eric Germain lookin' at Slippery Creek and
> some of those other trails out Nictaux way...those Right Coast Krawlers
> sure
> build some nice trails...
> I think it was u that I saw pics of out there in the spring...
>
> and last all....Eric is going to fabricate my new flatties, but need
> design
> plans/pics.... looks like the new Jeep is about to start the hardcore mods
> hehehe
> "Steve" <xjlifter@bogus.com> wrote in message
> news:Ef92d.68372$vO1.357656@nnrp1.uunet.ca...
>> Leave it like it is. The girls obviously dig it:
>>
>> http://tinyurl.com/5hcsm
>>
>> Steve
>> http://xjeep.dyndns.org
>>
>>
>> Jeff wrote:
>>
>> > I was letting the Jeep pull me along in 2nd gear with no gas while
>> > straddling some ruts.. I then saw a tree coming ahead and pulled closer
> to
>> > the ruts to get around the tree and just as I was going around it my
> rear
>> > wheels fell into the rut sending my fender directly into the
> tree...CRUNCH!
>> > completely righting off the fender and then some at only, maybe 2
>> > mph...
>> >
>> > now here it is... The Jeep is almost new...2003 still stock other than
> skids
>> > and 31" mudders.
>> >
>> > What would you do??
>
>
09-16-2004, 10:21 AM
#34
Guest
Posts: n/a
Re: Crunched Fender Ideas
Sorry I've gotten in on this thread late.
I "doinked" both of the front fenders on my '94 YJ from underneath during ou
Rubicon trail run last month. (Front tires hit the undersides of the fenders
which are fitted with TJ flares...bump stops too short.) I also managed to
scrape the right front on a major rock wall when I slid slightly to the
right going over a nasty obstacle.
Anyway, I've wanted to "flatfender" the YJ for a couple of years, but wasn't
sure how to go about it. I've seen quite a few "hacksaw" jobs on TJs & YJs
around here that frankly look like Hell. The only kits I've seen are by Rev1
and Poison Spyder, with the latter looking a lot better and appearing to be
quite stout. Only issue I have with them is they have a decided "unfinished"
look even when painted.
So anyway I went ahead and ordered the Poison Spyder tube fenders. The tabs
for the radiator support area got a bit "doinked" in shipment but can be
easily straightened when fitting. They are stout as Hell and all the
measurements I've made so far indicate they will bolt right up, not that
they'll be easy to install. There's a good deal of cuttting involved in
removing the outer fender skins. Not sure this is for someone like me with
minimal body work experience. Also, PS claims there's no need to make any
vertical cuts through the inner fender at the radiator support or at the
firewall. Despite this, I see numerous spot welds holding the stuff
together, not sure how these are to be separated.
FWIW, I got the ones without the 3" added flare, not sure what these will be
like in mud, etc., but I plan to carry a spare set of wiper blades and a
squeegee! Will reorrt after they're fitted.
"Jeff" <jrhiltz@av.eastlink.ca> wrote in message
news:bpe2d.68407$vO1.357772@nnrp1.uunet.ca...
> ROTFLMFAO......
> I honestly never gave it any thought...LOL
> John and I were the only two vehicles on the trail that day and we only
> had
> two eyes between us....
> That was a good one Steve.... 1I4X4 Club.... it might be kool to start
> one
> just for kicks ...lol
>
> Oh Yeah! Chicks dig body damage!!! Those are the girls from BC... The
> one
> on the left has an Electric Lime Green Rubi
>
> BTW...was out last night with Eric Germain lookin' at Slippery Creek and
> some of those other trails out Nictaux way...those Right Coast Krawlers
> sure
> build some nice trails...
> I think it was u that I saw pics of out there in the spring...
>
> and last all....Eric is going to fabricate my new flatties, but need
> design
> plans/pics.... looks like the new Jeep is about to start the hardcore mods
> hehehe
> "Steve" <xjlifter@bogus.com> wrote in message
> news:Ef92d.68372$vO1.357656@nnrp1.uunet.ca...
>> Leave it like it is. The girls obviously dig it:
>>
>> http://tinyurl.com/5hcsm
>>
>> Steve
>> http://xjeep.dyndns.org
>>
>>
>> Jeff wrote:
>>
>> > I was letting the Jeep pull me along in 2nd gear with no gas while
>> > straddling some ruts.. I then saw a tree coming ahead and pulled closer
> to
>> > the ruts to get around the tree and just as I was going around it my
> rear
>> > wheels fell into the rut sending my fender directly into the
> tree...CRUNCH!
>> > completely righting off the fender and then some at only, maybe 2
>> > mph...
>> >
>> > now here it is... The Jeep is almost new...2003 still stock other than
> skids
>> > and 31" mudders.
>> >
>> > What would you do??
>
>
I "doinked" both of the front fenders on my '94 YJ from underneath during ou
Rubicon trail run last month. (Front tires hit the undersides of the fenders
which are fitted with TJ flares...bump stops too short.) I also managed to
scrape the right front on a major rock wall when I slid slightly to the
right going over a nasty obstacle.
Anyway, I've wanted to "flatfender" the YJ for a couple of years, but wasn't
sure how to go about it. I've seen quite a few "hacksaw" jobs on TJs & YJs
around here that frankly look like Hell. The only kits I've seen are by Rev1
and Poison Spyder, with the latter looking a lot better and appearing to be
quite stout. Only issue I have with them is they have a decided "unfinished"
look even when painted.
So anyway I went ahead and ordered the Poison Spyder tube fenders. The tabs
for the radiator support area got a bit "doinked" in shipment but can be
easily straightened when fitting. They are stout as Hell and all the
measurements I've made so far indicate they will bolt right up, not that
they'll be easy to install. There's a good deal of cuttting involved in
removing the outer fender skins. Not sure this is for someone like me with
minimal body work experience. Also, PS claims there's no need to make any
vertical cuts through the inner fender at the radiator support or at the
firewall. Despite this, I see numerous spot welds holding the stuff
together, not sure how these are to be separated.
FWIW, I got the ones without the 3" added flare, not sure what these will be
like in mud, etc., but I plan to carry a spare set of wiper blades and a
squeegee! Will reorrt after they're fitted.
"Jeff" <jrhiltz@av.eastlink.ca> wrote in message
news:bpe2d.68407$vO1.357772@nnrp1.uunet.ca...
> ROTFLMFAO......
> I honestly never gave it any thought...LOL
> John and I were the only two vehicles on the trail that day and we only
> had
> two eyes between us....
> That was a good one Steve.... 1I4X4 Club.... it might be kool to start
> one
> just for kicks ...lol
>
> Oh Yeah! Chicks dig body damage!!! Those are the girls from BC... The
> one
> on the left has an Electric Lime Green Rubi
>
> BTW...was out last night with Eric Germain lookin' at Slippery Creek and
> some of those other trails out Nictaux way...those Right Coast Krawlers
> sure
> build some nice trails...
> I think it was u that I saw pics of out there in the spring...
>
> and last all....Eric is going to fabricate my new flatties, but need
> design
> plans/pics.... looks like the new Jeep is about to start the hardcore mods
> hehehe
> "Steve" <xjlifter@bogus.com> wrote in message
> news:Ef92d.68372$vO1.357656@nnrp1.uunet.ca...
>> Leave it like it is. The girls obviously dig it:
>>
>> http://tinyurl.com/5hcsm
>>
>> Steve
>> http://xjeep.dyndns.org
>>
>>
>> Jeff wrote:
>>
>> > I was letting the Jeep pull me along in 2nd gear with no gas while
>> > straddling some ruts.. I then saw a tree coming ahead and pulled closer
> to
>> > the ruts to get around the tree and just as I was going around it my
> rear
>> > wheels fell into the rut sending my fender directly into the
> tree...CRUNCH!
>> > completely righting off the fender and then some at only, maybe 2
>> > mph...
>> >
>> > now here it is... The Jeep is almost new...2003 still stock other than
> skids
>> > and 31" mudders.
>> >
>> > What would you do??
>
>
09-16-2004, 08:55 PM
#35
Guest
Posts: n/a
Re: Crunched Fender Ideas
People with XJ's know what they are talking about :)
KH
"Steve" <xjlifter@bogus.com> wrote in message
news:Ef92d.68372$vO1.357656@nnrp1.uunet.ca...
> Leave it like it is. The girls obviously dig it:
>
> http://tinyurl.com/5hcsm
>
> Steve
> http://xjeep.dyndns.org
>
>
> Jeff wrote:
>
>> I was letting the Jeep pull me along in 2nd gear with no gas while
>> straddling some ruts.. I then saw a tree coming ahead and pulled closer
>> to
>> the ruts to get around the tree and just as I was going around it my rear
>> wheels fell into the rut sending my fender directly into the
>> tree...CRUNCH!
>> completely righting off the fender and then some at only, maybe 2 mph...
>>
>> now here it is... The Jeep is almost new...2003 still stock other than
>> skids
>> and 31" mudders.
>>
>> What would you do??
KH
"Steve" <xjlifter@bogus.com> wrote in message
news:Ef92d.68372$vO1.357656@nnrp1.uunet.ca...
> Leave it like it is. The girls obviously dig it:
>
> http://tinyurl.com/5hcsm
>
> Steve
> http://xjeep.dyndns.org
>
>
> Jeff wrote:
>
>> I was letting the Jeep pull me along in 2nd gear with no gas while
>> straddling some ruts.. I then saw a tree coming ahead and pulled closer
>> to
>> the ruts to get around the tree and just as I was going around it my rear
>> wheels fell into the rut sending my fender directly into the
>> tree...CRUNCH!
>> completely righting off the fender and then some at only, maybe 2 mph...
>>
>> now here it is... The Jeep is almost new...2003 still stock other than
>> skids
>> and 31" mudders.
>>
>> What would you do??
09-16-2004, 08:55 PM
#36
Guest
Posts: n/a
Re: Crunched Fender Ideas
People with XJ's know what they are talking about :)
KH
"Steve" <xjlifter@bogus.com> wrote in message
news:Ef92d.68372$vO1.357656@nnrp1.uunet.ca...
> Leave it like it is. The girls obviously dig it:
>
> http://tinyurl.com/5hcsm
>
> Steve
> http://xjeep.dyndns.org
>
>
> Jeff wrote:
>
>> I was letting the Jeep pull me along in 2nd gear with no gas while
>> straddling some ruts.. I then saw a tree coming ahead and pulled closer
>> to
>> the ruts to get around the tree and just as I was going around it my rear
>> wheels fell into the rut sending my fender directly into the
>> tree...CRUNCH!
>> completely righting off the fender and then some at only, maybe 2 mph...
>>
>> now here it is... The Jeep is almost new...2003 still stock other than
>> skids
>> and 31" mudders.
>>
>> What would you do??
KH
"Steve" <xjlifter@bogus.com> wrote in message
news:Ef92d.68372$vO1.357656@nnrp1.uunet.ca...
> Leave it like it is. The girls obviously dig it:
>
> http://tinyurl.com/5hcsm
>
> Steve
> http://xjeep.dyndns.org
>
>
> Jeff wrote:
>
>> I was letting the Jeep pull me along in 2nd gear with no gas while
>> straddling some ruts.. I then saw a tree coming ahead and pulled closer
>> to
>> the ruts to get around the tree and just as I was going around it my rear
>> wheels fell into the rut sending my fender directly into the
>> tree...CRUNCH!
>> completely righting off the fender and then some at only, maybe 2 mph...
>>
>> now here it is... The Jeep is almost new...2003 still stock other than
>> skids
>> and 31" mudders.
>>
>> What would you do??
09-16-2004, 08:55 PM
#37
Guest
Posts: n/a
Re: Crunched Fender Ideas
People with XJ's know what they are talking about :)
KH
"Steve" <xjlifter@bogus.com> wrote in message
news:Ef92d.68372$vO1.357656@nnrp1.uunet.ca...
> Leave it like it is. The girls obviously dig it:
>
> http://tinyurl.com/5hcsm
>
> Steve
> http://xjeep.dyndns.org
>
>
> Jeff wrote:
>
>> I was letting the Jeep pull me along in 2nd gear with no gas while
>> straddling some ruts.. I then saw a tree coming ahead and pulled closer
>> to
>> the ruts to get around the tree and just as I was going around it my rear
>> wheels fell into the rut sending my fender directly into the
>> tree...CRUNCH!
>> completely righting off the fender and then some at only, maybe 2 mph...
>>
>> now here it is... The Jeep is almost new...2003 still stock other than
>> skids
>> and 31" mudders.
>>
>> What would you do??
KH
"Steve" <xjlifter@bogus.com> wrote in message
news:Ef92d.68372$vO1.357656@nnrp1.uunet.ca...
> Leave it like it is. The girls obviously dig it:
>
> http://tinyurl.com/5hcsm
>
> Steve
> http://xjeep.dyndns.org
>
>
> Jeff wrote:
>
>> I was letting the Jeep pull me along in 2nd gear with no gas while
>> straddling some ruts.. I then saw a tree coming ahead and pulled closer
>> to
>> the ruts to get around the tree and just as I was going around it my rear
>> wheels fell into the rut sending my fender directly into the
>> tree...CRUNCH!
>> completely righting off the fender and then some at only, maybe 2 mph...
>>
>> now here it is... The Jeep is almost new...2003 still stock other than
>> skids
>> and 31" mudders.
>>
>> What would you do??
09-16-2004, 09:34 PM
#38
Guest
Posts: n/a
Re: Crunched Fender Ideas
Got 'er all fixed up now =) http://tinyurl.com/4yn9f
LOL
Thanks everyone, Jeff
'03 TJ Custom Fender
"Kevin in San Diego" <kevin_hedstrom@yahoospam.com> wrote in message
news:SBq2d.168103$4o.102138@fed1read01...
> People with XJ's know what they are talking about :)
> KH
>
> "Steve" <xjlifter@bogus.com> wrote in message
> news:Ef92d.68372$vO1.357656@nnrp1.uunet.ca...
> > Leave it like it is. The girls obviously dig it:
> >
> > http://tinyurl.com/5hcsm
> >
> > Steve
> > http://xjeep.dyndns.org
> >
> >
> > Jeff wrote:
> >
> >> I was letting the Jeep pull me along in 2nd gear with no gas while
> >> straddling some ruts.. I then saw a tree coming ahead and pulled closer
> >> to
> >> the ruts to get around the tree and just as I was going around it my
rear
> >> wheels fell into the rut sending my fender directly into the
> >> tree...CRUNCH!
> >> completely righting off the fender and then some at only, maybe 2
mph...
> >>
> >> now here it is... The Jeep is almost new...2003 still stock other than
> >> skids
> >> and 31" mudders.
> >>
> >> What would you do??
>
>
LOL
Thanks everyone, Jeff
'03 TJ Custom Fender
"Kevin in San Diego" <kevin_hedstrom@yahoospam.com> wrote in message
news:SBq2d.168103$4o.102138@fed1read01...
> People with XJ's know what they are talking about :)
> KH
>
> "Steve" <xjlifter@bogus.com> wrote in message
> news:Ef92d.68372$vO1.357656@nnrp1.uunet.ca...
> > Leave it like it is. The girls obviously dig it:
> >
> > http://tinyurl.com/5hcsm
> >
> > Steve
> > http://xjeep.dyndns.org
> >
> >
> > Jeff wrote:
> >
> >> I was letting the Jeep pull me along in 2nd gear with no gas while
> >> straddling some ruts.. I then saw a tree coming ahead and pulled closer
> >> to
> >> the ruts to get around the tree and just as I was going around it my
rear
> >> wheels fell into the rut sending my fender directly into the
> >> tree...CRUNCH!
> >> completely righting off the fender and then some at only, maybe 2
mph...
> >>
> >> now here it is... The Jeep is almost new...2003 still stock other than
> >> skids
> >> and 31" mudders.
> >>
> >> What would you do??
>
>
09-16-2004, 09:34 PM
#39
Guest
Posts: n/a
Re: Crunched Fender Ideas
Got 'er all fixed up now =) http://tinyurl.com/4yn9f
LOL
Thanks everyone, Jeff
'03 TJ Custom Fender
"Kevin in San Diego" <kevin_hedstrom@yahoospam.com> wrote in message
news:SBq2d.168103$4o.102138@fed1read01...
> People with XJ's know what they are talking about :)
> KH
>
> "Steve" <xjlifter@bogus.com> wrote in message
> news:Ef92d.68372$vO1.357656@nnrp1.uunet.ca...
> > Leave it like it is. The girls obviously dig it:
> >
> > http://tinyurl.com/5hcsm
> >
> > Steve
> > http://xjeep.dyndns.org
> >
> >
> > Jeff wrote:
> >
> >> I was letting the Jeep pull me along in 2nd gear with no gas while
> >> straddling some ruts.. I then saw a tree coming ahead and pulled closer
> >> to
> >> the ruts to get around the tree and just as I was going around it my
rear
> >> wheels fell into the rut sending my fender directly into the
> >> tree...CRUNCH!
> >> completely righting off the fender and then some at only, maybe 2
mph...
> >>
> >> now here it is... The Jeep is almost new...2003 still stock other than
> >> skids
> >> and 31" mudders.
> >>
> >> What would you do??
>
>
LOL
Thanks everyone, Jeff
'03 TJ Custom Fender
"Kevin in San Diego" <kevin_hedstrom@yahoospam.com> wrote in message
news:SBq2d.168103$4o.102138@fed1read01...
> People with XJ's know what they are talking about :)
> KH
>
> "Steve" <xjlifter@bogus.com> wrote in message
> news:Ef92d.68372$vO1.357656@nnrp1.uunet.ca...
> > Leave it like it is. The girls obviously dig it:
> >
> > http://tinyurl.com/5hcsm
> >
> > Steve
> > http://xjeep.dyndns.org
> >
> >
> > Jeff wrote:
> >
> >> I was letting the Jeep pull me along in 2nd gear with no gas while
> >> straddling some ruts.. I then saw a tree coming ahead and pulled closer
> >> to
> >> the ruts to get around the tree and just as I was going around it my
rear
> >> wheels fell into the rut sending my fender directly into the
> >> tree...CRUNCH!
> >> completely righting off the fender and then some at only, maybe 2
mph...
> >>
> >> now here it is... The Jeep is almost new...2003 still stock other than
> >> skids
> >> and 31" mudders.
> >>
> >> What would you do??
>
>
09-16-2004, 09:34 PM
#40
Guest
Posts: n/a
Re: Crunched Fender Ideas
Got 'er all fixed up now =) http://tinyurl.com/4yn9f
LOL
Thanks everyone, Jeff
'03 TJ Custom Fender
"Kevin in San Diego" <kevin_hedstrom@yahoospam.com> wrote in message
news:SBq2d.168103$4o.102138@fed1read01...
> People with XJ's know what they are talking about :)
> KH
>
> "Steve" <xjlifter@bogus.com> wrote in message
> news:Ef92d.68372$vO1.357656@nnrp1.uunet.ca...
> > Leave it like it is. The girls obviously dig it:
> >
> > http://tinyurl.com/5hcsm
> >
> > Steve
> > http://xjeep.dyndns.org
> >
> >
> > Jeff wrote:
> >
> >> I was letting the Jeep pull me along in 2nd gear with no gas while
> >> straddling some ruts.. I then saw a tree coming ahead and pulled closer
> >> to
> >> the ruts to get around the tree and just as I was going around it my
rear
> >> wheels fell into the rut sending my fender directly into the
> >> tree...CRUNCH!
> >> completely righting off the fender and then some at only, maybe 2
mph...
> >>
> >> now here it is... The Jeep is almost new...2003 still stock other than
> >> skids
> >> and 31" mudders.
> >>
> >> What would you do??
>
>
LOL
Thanks everyone, Jeff
'03 TJ Custom Fender
"Kevin in San Diego" <kevin_hedstrom@yahoospam.com> wrote in message
news:SBq2d.168103$4o.102138@fed1read01...
> People with XJ's know what they are talking about :)
> KH
>
> "Steve" <xjlifter@bogus.com> wrote in message
> news:Ef92d.68372$vO1.357656@nnrp1.uunet.ca...
> > Leave it like it is. The girls obviously dig it:
> >
> > http://tinyurl.com/5hcsm
> >
> > Steve
> > http://xjeep.dyndns.org
> >
> >
> > Jeff wrote:
> >
> >> I was letting the Jeep pull me along in 2nd gear with no gas while
> >> straddling some ruts.. I then saw a tree coming ahead and pulled closer
> >> to
> >> the ruts to get around the tree and just as I was going around it my
rear
> >> wheels fell into the rut sending my fender directly into the
> >> tree...CRUNCH!
> >> completely righting off the fender and then some at only, maybe 2
mph...
> >>
> >> now here it is... The Jeep is almost new...2003 still stock other than
> >> skids
> >> and 31" mudders.
> >>
> >> What would you do??
>
>
