Crunched Fender Ideas
#21
Guest
Posts: n/a
Re: Crunched Fender Ideas
hehehe ...oh yeah ...forgot the one eye part LOL
honestly I don't notice it anymore...lived like this for twenty years....
ppl on the trails are amazed when I am one inch from an obstacle, and I know
that I am one inch away from it ......
I wish I could say I didn't see that tree...but I did and I was going around
it....
One other thing...driving twenty years like this, I've never had an
accident...knock on wood....well maybe I can't say that any longer...oh well
hehehe that's JEEPIN'
As for the topic here....Flatties =) ....my buddy just bought himself all
the gear and says that we can build them.....
I found another company that make 'em
http://www.metalfusionfab.com/tj_tube_fenders.htm
Anyone know anywhere else???...not that I am gonna purchase, just lookin'
for ideas... like I said in the earlier post..."I'm a poor boy"
or even better...know the location for plans to build 'em??
Any help would be appreciated...
Thank You, Jeff
'03 TJ w/ custom fender
"Cherokee-LTD" <spammenot@home.com> wrote in message
news:mO02d.6306$Q7D.3554@twister01.bloor.is.net.ca ble.rogers.com...
>
> "Jeff" <jrhiltz@av.eastlink.ca> wrote in message :
> : I was letting the Jeep pull me along in 2nd gear with no gas while
> : straddling some ruts.. I then saw a tree coming ahead and pulled closer
to
> : the ruts to get around the tree and just as I was going around it my
rear
> : wheels fell into the rut sending my fender directly into the
> tree...CRUNCH!
> : completely righting off the fender and then some at only, maybe 2 mph...
> :
>
> The obvious question to me is;
> How have you not dinged that fender before this? That must be brutal
> wheelin' with only one eye!
> You could try to straighten it out but I think if you put a value on your
> time you'd be further ahead replacing it. Whatever you decide, there would
> appear to be some minor structural damage - rad cradle, inner fender. When
> you mend these areas be sure to rust proof them well.
> Tube fenders will cost a bit more upfront but might save you some cash in
> the long run and they look pretty cool IMO.
> -Brian
>
>
honestly I don't notice it anymore...lived like this for twenty years....
ppl on the trails are amazed when I am one inch from an obstacle, and I know
that I am one inch away from it ......
I wish I could say I didn't see that tree...but I did and I was going around
it....
One other thing...driving twenty years like this, I've never had an
accident...knock on wood....well maybe I can't say that any longer...oh well
hehehe that's JEEPIN'
As for the topic here....Flatties =) ....my buddy just bought himself all
the gear and says that we can build them.....
I found another company that make 'em
http://www.metalfusionfab.com/tj_tube_fenders.htm
Anyone know anywhere else???...not that I am gonna purchase, just lookin'
for ideas... like I said in the earlier post..."I'm a poor boy"
or even better...know the location for plans to build 'em??
Any help would be appreciated...
Thank You, Jeff
'03 TJ w/ custom fender
"Cherokee-LTD" <spammenot@home.com> wrote in message
news:mO02d.6306$Q7D.3554@twister01.bloor.is.net.ca ble.rogers.com...
>
> "Jeff" <jrhiltz@av.eastlink.ca> wrote in message :
> : I was letting the Jeep pull me along in 2nd gear with no gas while
> : straddling some ruts.. I then saw a tree coming ahead and pulled closer
to
> : the ruts to get around the tree and just as I was going around it my
rear
> : wheels fell into the rut sending my fender directly into the
> tree...CRUNCH!
> : completely righting off the fender and then some at only, maybe 2 mph...
> :
>
> The obvious question to me is;
> How have you not dinged that fender before this? That must be brutal
> wheelin' with only one eye!
> You could try to straighten it out but I think if you put a value on your
> time you'd be further ahead replacing it. Whatever you decide, there would
> appear to be some minor structural damage - rad cradle, inner fender. When
> you mend these areas be sure to rust proof them well.
> Tube fenders will cost a bit more upfront but might save you some cash in
> the long run and they look pretty cool IMO.
> -Brian
>
>
#22
Guest
Posts: n/a
Re: Crunched Fender Ideas
hehehe ...oh yeah ...forgot the one eye part LOL
honestly I don't notice it anymore...lived like this for twenty years....
ppl on the trails are amazed when I am one inch from an obstacle, and I know
that I am one inch away from it ......
I wish I could say I didn't see that tree...but I did and I was going around
it....
One other thing...driving twenty years like this, I've never had an
accident...knock on wood....well maybe I can't say that any longer...oh well
hehehe that's JEEPIN'
As for the topic here....Flatties =) ....my buddy just bought himself all
the gear and says that we can build them.....
I found another company that make 'em
http://www.metalfusionfab.com/tj_tube_fenders.htm
Anyone know anywhere else???...not that I am gonna purchase, just lookin'
for ideas... like I said in the earlier post..."I'm a poor boy"
or even better...know the location for plans to build 'em??
Any help would be appreciated...
Thank You, Jeff
'03 TJ w/ custom fender
"Cherokee-LTD" <spammenot@home.com> wrote in message
news:mO02d.6306$Q7D.3554@twister01.bloor.is.net.ca ble.rogers.com...
>
> "Jeff" <jrhiltz@av.eastlink.ca> wrote in message :
> : I was letting the Jeep pull me along in 2nd gear with no gas while
> : straddling some ruts.. I then saw a tree coming ahead and pulled closer
to
> : the ruts to get around the tree and just as I was going around it my
rear
> : wheels fell into the rut sending my fender directly into the
> tree...CRUNCH!
> : completely righting off the fender and then some at only, maybe 2 mph...
> :
>
> The obvious question to me is;
> How have you not dinged that fender before this? That must be brutal
> wheelin' with only one eye!
> You could try to straighten it out but I think if you put a value on your
> time you'd be further ahead replacing it. Whatever you decide, there would
> appear to be some minor structural damage - rad cradle, inner fender. When
> you mend these areas be sure to rust proof them well.
> Tube fenders will cost a bit more upfront but might save you some cash in
> the long run and they look pretty cool IMO.
> -Brian
>
>
honestly I don't notice it anymore...lived like this for twenty years....
ppl on the trails are amazed when I am one inch from an obstacle, and I know
that I am one inch away from it ......
I wish I could say I didn't see that tree...but I did and I was going around
it....
One other thing...driving twenty years like this, I've never had an
accident...knock on wood....well maybe I can't say that any longer...oh well
hehehe that's JEEPIN'
As for the topic here....Flatties =) ....my buddy just bought himself all
the gear and says that we can build them.....
I found another company that make 'em
http://www.metalfusionfab.com/tj_tube_fenders.htm
Anyone know anywhere else???...not that I am gonna purchase, just lookin'
for ideas... like I said in the earlier post..."I'm a poor boy"
or even better...know the location for plans to build 'em??
Any help would be appreciated...
Thank You, Jeff
'03 TJ w/ custom fender
"Cherokee-LTD" <spammenot@home.com> wrote in message
news:mO02d.6306$Q7D.3554@twister01.bloor.is.net.ca ble.rogers.com...
>
> "Jeff" <jrhiltz@av.eastlink.ca> wrote in message :
> : I was letting the Jeep pull me along in 2nd gear with no gas while
> : straddling some ruts.. I then saw a tree coming ahead and pulled closer
to
> : the ruts to get around the tree and just as I was going around it my
rear
> : wheels fell into the rut sending my fender directly into the
> tree...CRUNCH!
> : completely righting off the fender and then some at only, maybe 2 mph...
> :
>
> The obvious question to me is;
> How have you not dinged that fender before this? That must be brutal
> wheelin' with only one eye!
> You could try to straighten it out but I think if you put a value on your
> time you'd be further ahead replacing it. Whatever you decide, there would
> appear to be some minor structural damage - rad cradle, inner fender. When
> you mend these areas be sure to rust proof them well.
> Tube fenders will cost a bit more upfront but might save you some cash in
> the long run and they look pretty cool IMO.
> -Brian
>
>
#23
Guest
Posts: n/a
Re: Crunched Fender Ideas
Leave it like it is. The girls obviously dig it:
http://tinyurl.com/5hcsm
Steve
http://xjeep.dyndns.org
Jeff wrote:
> I was letting the Jeep pull me along in 2nd gear with no gas while
> straddling some ruts.. I then saw a tree coming ahead and pulled closer to
> the ruts to get around the tree and just as I was going around it my rear
> wheels fell into the rut sending my fender directly into the tree...CRUNCH!
> completely righting off the fender and then some at only, maybe 2 mph...
>
> now here it is... The Jeep is almost new...2003 still stock other than skids
> and 31" mudders.
>
> What would you do??
http://tinyurl.com/5hcsm
Steve
http://xjeep.dyndns.org
Jeff wrote:
> I was letting the Jeep pull me along in 2nd gear with no gas while
> straddling some ruts.. I then saw a tree coming ahead and pulled closer to
> the ruts to get around the tree and just as I was going around it my rear
> wheels fell into the rut sending my fender directly into the tree...CRUNCH!
> completely righting off the fender and then some at only, maybe 2 mph...
>
> now here it is... The Jeep is almost new...2003 still stock other than skids
> and 31" mudders.
>
> What would you do??
#24
Guest
Posts: n/a
Re: Crunched Fender Ideas
Leave it like it is. The girls obviously dig it:
http://tinyurl.com/5hcsm
Steve
http://xjeep.dyndns.org
Jeff wrote:
> I was letting the Jeep pull me along in 2nd gear with no gas while
> straddling some ruts.. I then saw a tree coming ahead and pulled closer to
> the ruts to get around the tree and just as I was going around it my rear
> wheels fell into the rut sending my fender directly into the tree...CRUNCH!
> completely righting off the fender and then some at only, maybe 2 mph...
>
> now here it is... The Jeep is almost new...2003 still stock other than skids
> and 31" mudders.
>
> What would you do??
http://tinyurl.com/5hcsm
Steve
http://xjeep.dyndns.org
Jeff wrote:
> I was letting the Jeep pull me along in 2nd gear with no gas while
> straddling some ruts.. I then saw a tree coming ahead and pulled closer to
> the ruts to get around the tree and just as I was going around it my rear
> wheels fell into the rut sending my fender directly into the tree...CRUNCH!
> completely righting off the fender and then some at only, maybe 2 mph...
>
> now here it is... The Jeep is almost new...2003 still stock other than skids
> and 31" mudders.
>
> What would you do??
#25
Guest
Posts: n/a
Re: Crunched Fender Ideas
Leave it like it is. The girls obviously dig it:
http://tinyurl.com/5hcsm
Steve
http://xjeep.dyndns.org
Jeff wrote:
> I was letting the Jeep pull me along in 2nd gear with no gas while
> straddling some ruts.. I then saw a tree coming ahead and pulled closer to
> the ruts to get around the tree and just as I was going around it my rear
> wheels fell into the rut sending my fender directly into the tree...CRUNCH!
> completely righting off the fender and then some at only, maybe 2 mph...
>
> now here it is... The Jeep is almost new...2003 still stock other than skids
> and 31" mudders.
>
> What would you do??
http://tinyurl.com/5hcsm
Steve
http://xjeep.dyndns.org
Jeff wrote:
> I was letting the Jeep pull me along in 2nd gear with no gas while
> straddling some ruts.. I then saw a tree coming ahead and pulled closer to
> the ruts to get around the tree and just as I was going around it my rear
> wheels fell into the rut sending my fender directly into the tree...CRUNCH!
> completely righting off the fender and then some at only, maybe 2 mph...
>
> now here it is... The Jeep is almost new...2003 still stock other than skids
> and 31" mudders.
>
> What would you do??
#26
Guest
Posts: n/a
Re: Crunched Fender Ideas
Jeff,
Don't know your wheeling partner John Cranfield, but heard of him and
his notorious hi-lift accident:
http://www.automotivehelper.com/topic9942.htm
You guys aren't starting a one-eyed 4x4 club or something?
Steve
http://xjeep.dyndns.org
Jeff wrote:
> hehehe ...oh yeah ...forgot the one eye part LOL
> John Cranfield and I were showing a couple girls that had attended
> the Jeep Jamboree in BC and were in NS on vacation a trail that we
> had just cleared this spring for the Jam. Victoria's Secret...
Don't know your wheeling partner John Cranfield, but heard of him and
his notorious hi-lift accident:
http://www.automotivehelper.com/topic9942.htm
You guys aren't starting a one-eyed 4x4 club or something?
Steve
http://xjeep.dyndns.org
Jeff wrote:
> hehehe ...oh yeah ...forgot the one eye part LOL
> John Cranfield and I were showing a couple girls that had attended
> the Jeep Jamboree in BC and were in NS on vacation a trail that we
> had just cleared this spring for the Jam. Victoria's Secret...
#27
Guest
Posts: n/a
Re: Crunched Fender Ideas
Jeff,
Don't know your wheeling partner John Cranfield, but heard of him and
his notorious hi-lift accident:
http://www.automotivehelper.com/topic9942.htm
You guys aren't starting a one-eyed 4x4 club or something?
Steve
http://xjeep.dyndns.org
Jeff wrote:
> hehehe ...oh yeah ...forgot the one eye part LOL
> John Cranfield and I were showing a couple girls that had attended
> the Jeep Jamboree in BC and were in NS on vacation a trail that we
> had just cleared this spring for the Jam. Victoria's Secret...
Don't know your wheeling partner John Cranfield, but heard of him and
his notorious hi-lift accident:
http://www.automotivehelper.com/topic9942.htm
You guys aren't starting a one-eyed 4x4 club or something?
Steve
http://xjeep.dyndns.org
Jeff wrote:
> hehehe ...oh yeah ...forgot the one eye part LOL
> John Cranfield and I were showing a couple girls that had attended
> the Jeep Jamboree in BC and were in NS on vacation a trail that we
> had just cleared this spring for the Jam. Victoria's Secret...
#28
Guest
Posts: n/a
Re: Crunched Fender Ideas
Jeff,
Don't know your wheeling partner John Cranfield, but heard of him and
his notorious hi-lift accident:
http://www.automotivehelper.com/topic9942.htm
You guys aren't starting a one-eyed 4x4 club or something?
Steve
http://xjeep.dyndns.org
Jeff wrote:
> hehehe ...oh yeah ...forgot the one eye part LOL
> John Cranfield and I were showing a couple girls that had attended
> the Jeep Jamboree in BC and were in NS on vacation a trail that we
> had just cleared this spring for the Jam. Victoria's Secret...
Don't know your wheeling partner John Cranfield, but heard of him and
his notorious hi-lift accident:
http://www.automotivehelper.com/topic9942.htm
You guys aren't starting a one-eyed 4x4 club or something?
Steve
http://xjeep.dyndns.org
Jeff wrote:
> hehehe ...oh yeah ...forgot the one eye part LOL
> John Cranfield and I were showing a couple girls that had attended
> the Jeep Jamboree in BC and were in NS on vacation a trail that we
> had just cleared this spring for the Jam. Victoria's Secret...
#29
Guest
Posts: n/a
Re: Crunched Fender Ideas
ROTFLMFAO......
I honestly never gave it any thought...LOL
John and I were the only two vehicles on the trail that day and we only had
two eyes between us....
That was a good one Steve.... 1I4X4 Club.... it might be kool to start one
just for kicks ...lol
Oh Yeah! Chicks dig body damage!!! Those are the girls from BC... The one
on the left has an Electric Lime Green Rubi
BTW...was out last night with Eric Germain lookin' at Slippery Creek and
some of those other trails out Nictaux way...those Right Coast Krawlers sure
build some nice trails...
I think it was u that I saw pics of out there in the spring...
and last all....Eric is going to fabricate my new flatties, but need design
plans/pics.... looks like the new Jeep is about to start the hardcore mods
hehehe
"Steve" <xjlifter@bogus.com> wrote in message
news:Ef92d.68372$vO1.357656@nnrp1.uunet.ca...
> Leave it like it is. The girls obviously dig it:
>
> http://tinyurl.com/5hcsm
>
> Steve
> http://xjeep.dyndns.org
>
>
> Jeff wrote:
>
> > I was letting the Jeep pull me along in 2nd gear with no gas while
> > straddling some ruts.. I then saw a tree coming ahead and pulled closer
to
> > the ruts to get around the tree and just as I was going around it my
rear
> > wheels fell into the rut sending my fender directly into the
tree...CRUNCH!
> > completely righting off the fender and then some at only, maybe 2 mph...
> >
> > now here it is... The Jeep is almost new...2003 still stock other than
skids
> > and 31" mudders.
> >
> > What would you do??
I honestly never gave it any thought...LOL
John and I were the only two vehicles on the trail that day and we only had
two eyes between us....
That was a good one Steve.... 1I4X4 Club.... it might be kool to start one
just for kicks ...lol
Oh Yeah! Chicks dig body damage!!! Those are the girls from BC... The one
on the left has an Electric Lime Green Rubi
BTW...was out last night with Eric Germain lookin' at Slippery Creek and
some of those other trails out Nictaux way...those Right Coast Krawlers sure
build some nice trails...
I think it was u that I saw pics of out there in the spring...
and last all....Eric is going to fabricate my new flatties, but need design
plans/pics.... looks like the new Jeep is about to start the hardcore mods
hehehe
"Steve" <xjlifter@bogus.com> wrote in message
news:Ef92d.68372$vO1.357656@nnrp1.uunet.ca...
> Leave it like it is. The girls obviously dig it:
>
> http://tinyurl.com/5hcsm
>
> Steve
> http://xjeep.dyndns.org
>
>
> Jeff wrote:
>
> > I was letting the Jeep pull me along in 2nd gear with no gas while
> > straddling some ruts.. I then saw a tree coming ahead and pulled closer
to
> > the ruts to get around the tree and just as I was going around it my
rear
> > wheels fell into the rut sending my fender directly into the
tree...CRUNCH!
> > completely righting off the fender and then some at only, maybe 2 mph...
> >
> > now here it is... The Jeep is almost new...2003 still stock other than
skids
> > and 31" mudders.
> >
> > What would you do??
#30
Guest
Posts: n/a
Re: Crunched Fender Ideas
ROTFLMFAO......
I honestly never gave it any thought...LOL
John and I were the only two vehicles on the trail that day and we only had
two eyes between us....
That was a good one Steve.... 1I4X4 Club.... it might be kool to start one
just for kicks ...lol
Oh Yeah! Chicks dig body damage!!! Those are the girls from BC... The one
on the left has an Electric Lime Green Rubi
BTW...was out last night with Eric Germain lookin' at Slippery Creek and
some of those other trails out Nictaux way...those Right Coast Krawlers sure
build some nice trails...
I think it was u that I saw pics of out there in the spring...
and last all....Eric is going to fabricate my new flatties, but need design
plans/pics.... looks like the new Jeep is about to start the hardcore mods
hehehe
"Steve" <xjlifter@bogus.com> wrote in message
news:Ef92d.68372$vO1.357656@nnrp1.uunet.ca...
> Leave it like it is. The girls obviously dig it:
>
> http://tinyurl.com/5hcsm
>
> Steve
> http://xjeep.dyndns.org
>
>
> Jeff wrote:
>
> > I was letting the Jeep pull me along in 2nd gear with no gas while
> > straddling some ruts.. I then saw a tree coming ahead and pulled closer
to
> > the ruts to get around the tree and just as I was going around it my
rear
> > wheels fell into the rut sending my fender directly into the
tree...CRUNCH!
> > completely righting off the fender and then some at only, maybe 2 mph...
> >
> > now here it is... The Jeep is almost new...2003 still stock other than
skids
> > and 31" mudders.
> >
> > What would you do??
I honestly never gave it any thought...LOL
John and I were the only two vehicles on the trail that day and we only had
two eyes between us....
That was a good one Steve.... 1I4X4 Club.... it might be kool to start one
just for kicks ...lol
Oh Yeah! Chicks dig body damage!!! Those are the girls from BC... The one
on the left has an Electric Lime Green Rubi
BTW...was out last night with Eric Germain lookin' at Slippery Creek and
some of those other trails out Nictaux way...those Right Coast Krawlers sure
build some nice trails...
I think it was u that I saw pics of out there in the spring...
and last all....Eric is going to fabricate my new flatties, but need design
plans/pics.... looks like the new Jeep is about to start the hardcore mods
hehehe
"Steve" <xjlifter@bogus.com> wrote in message
news:Ef92d.68372$vO1.357656@nnrp1.uunet.ca...
> Leave it like it is. The girls obviously dig it:
>
> http://tinyurl.com/5hcsm
>
> Steve
> http://xjeep.dyndns.org
>
>
> Jeff wrote:
>
> > I was letting the Jeep pull me along in 2nd gear with no gas while
> > straddling some ruts.. I then saw a tree coming ahead and pulled closer
to
> > the ruts to get around the tree and just as I was going around it my
rear
> > wheels fell into the rut sending my fender directly into the
tree...CRUNCH!
> > completely righting off the fender and then some at only, maybe 2 mph...
> >
> > now here it is... The Jeep is almost new...2003 still stock other than
skids
> > and 31" mudders.
> >
> > What would you do??