Crate Engine will not start
#54
Guest
Posts: n/a
Re: Crate Engine will not start
Gene wrote:
> GTI wrote:
> > I just purchased a crate engine from my local parts store and installed....Please post solution , when found, good luck....TIA
It was tje crank position sensor. Got it running this morning after
switching it out. Now i am getting a error ode 27. Gotta figure that
one out. Thanks for all the help you giys have given me!!!
#55
Guest
Posts: n/a
Re: Crate Engine will not start
Gene wrote:
> GTI wrote:
> > I just purchased a crate engine from my local parts store and installed....Please post solution , when found, good luck....TIA
It was tje crank position sensor. Got it running this morning after
switching it out. Now i am getting a error ode 27. Gotta figure that
one out. Thanks for all the help you giys have given me!!!
#56
Guest
Posts: n/a
Re: Crate Engine will not start
Gene wrote:
> GTI wrote:
> > I just purchased a crate engine from my local parts store and installed....Please post solution , when found, good luck....TIA
It was tje crank position sensor. Got it running this morning after
switching it out. Now i am getting a error ode 27. Gotta figure that
one out. Thanks for all the help you giys have given me!!!
#57
Guest
Posts: n/a
Re: Crate Engine will not start
Gene wrote:
> GTI wrote:
> > I just purchased a crate engine from my local parts store and installed....Please post solution , when found, good luck....TIA
It was tje crank position sensor. Got it running this morning after
switching it out. Now i am getting a error ode 27. Gotta figure that
one out. Thanks for all the help you giys have given me!!!
#58
Guest
Posts: n/a
Re: Crate Engine will not start
GTI wrote:
> Gene wrote:
>> GTI wrote:
>>> I just purchased a crate engine from my local parts store and
>>> installed....Please post solution , when found, good luck....TIA
>
>
> It was tje crank position sensor. Got it running this morning after
> switching it out. Now i am getting a error ode 27. Gotta figure that
> one out. Thanks for all the help you giys have given me!!!
Injector #3, and/or 4, and/or 5, and/or 6 output driver does not respond properly to the control signal.
Doublecheck all the connectors and the wires.
backprobe the injector with a noid-light
http://www.handsontools.com/store-ca...-Air_8204.html
(basically a 12V lamp. You can make a good noid light with a 12V LED
from radioshack.
--
DougW
> Gene wrote:
>> GTI wrote:
>>> I just purchased a crate engine from my local parts store and
>>> installed....Please post solution , when found, good luck....TIA
>
>
> It was tje crank position sensor. Got it running this morning after
> switching it out. Now i am getting a error ode 27. Gotta figure that
> one out. Thanks for all the help you giys have given me!!!
Injector #3, and/or 4, and/or 5, and/or 6 output driver does not respond properly to the control signal.
Doublecheck all the connectors and the wires.
backprobe the injector with a noid-light
http://www.handsontools.com/store-ca...-Air_8204.html
(basically a 12V lamp. You can make a good noid light with a 12V LED
from radioshack.
--
DougW
#59
Guest
Posts: n/a
Re: Crate Engine will not start
GTI wrote:
> Gene wrote:
>> GTI wrote:
>>> I just purchased a crate engine from my local parts store and
>>> installed....Please post solution , when found, good luck....TIA
>
>
> It was tje crank position sensor. Got it running this morning after
> switching it out. Now i am getting a error ode 27. Gotta figure that
> one out. Thanks for all the help you giys have given me!!!
Injector #3, and/or 4, and/or 5, and/or 6 output driver does not respond properly to the control signal.
Doublecheck all the connectors and the wires.
backprobe the injector with a noid-light
http://www.handsontools.com/store-ca...-Air_8204.html
(basically a 12V lamp. You can make a good noid light with a 12V LED
from radioshack.
--
DougW
> Gene wrote:
>> GTI wrote:
>>> I just purchased a crate engine from my local parts store and
>>> installed....Please post solution , when found, good luck....TIA
>
>
> It was tje crank position sensor. Got it running this morning after
> switching it out. Now i am getting a error ode 27. Gotta figure that
> one out. Thanks for all the help you giys have given me!!!
Injector #3, and/or 4, and/or 5, and/or 6 output driver does not respond properly to the control signal.
Doublecheck all the connectors and the wires.
backprobe the injector with a noid-light
http://www.handsontools.com/store-ca...-Air_8204.html
(basically a 12V lamp. You can make a good noid light with a 12V LED
from radioshack.
--
DougW
#60
Guest
Posts: n/a
Re: Crate Engine will not start
GTI wrote:
> Gene wrote:
>> GTI wrote:
>>> I just purchased a crate engine from my local parts store and
>>> installed....Please post solution , when found, good luck....TIA
>
>
> It was tje crank position sensor. Got it running this morning after
> switching it out. Now i am getting a error ode 27. Gotta figure that
> one out. Thanks for all the help you giys have given me!!!
Injector #3, and/or 4, and/or 5, and/or 6 output driver does not respond properly to the control signal.
Doublecheck all the connectors and the wires.
backprobe the injector with a noid-light
http://www.handsontools.com/store-ca...-Air_8204.html
(basically a 12V lamp. You can make a good noid light with a 12V LED
from radioshack.
--
DougW
> Gene wrote:
>> GTI wrote:
>>> I just purchased a crate engine from my local parts store and
>>> installed....Please post solution , when found, good luck....TIA
>
>
> It was tje crank position sensor. Got it running this morning after
> switching it out. Now i am getting a error ode 27. Gotta figure that
> one out. Thanks for all the help you giys have given me!!!
Injector #3, and/or 4, and/or 5, and/or 6 output driver does not respond properly to the control signal.
Doublecheck all the connectors and the wires.
backprobe the injector with a noid-light
http://www.handsontools.com/store-ca...-Air_8204.html
(basically a 12V lamp. You can make a good noid light with a 12V LED
from radioshack.
--
DougW