Crank position sensor - UK supplier please
06-04-2005, 04:58 PM
#11
Guest
Posts: n/a
Re: Crank position sensor - UK supplier please
Thanks for the quick replies.
The contacts are all clean and the straps look good. It's getting fuel and
the pumps working.
I'm getting fault code 11(no crank signal) and the sensor is giving
resistance which I think it shouldn't so this is what makes me think it's
the sensor.
--
Diverman
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:42A20A8E.BCD395AD@sympatico.ca...
> I recommend you try cleaning it's plug and socket with an electronic
> contact cleaner. They are only computer signal pins and they get
> dirty. WD40 will do as a cleaner in a pinch.
>
> One other thing to check is the ground strap from the head to the
> firewall, they also go bad at that age. I use a booster cable from the
> battery negative tot he firewall to bypass it to test it.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Diverman wrote:
> >
> > Hi Guys,
> >
> > I'm having trouble starting my Jeep. Turns over but won't start.
> > I think I've narrowed it down to the crank position sensor, everything
else
> > seems ok. From what I read they sometimes give up around now.
> > Where will I get one quick. I'm in Dublin, Ireland and the name of a
good
> > supplier in the UK would be appreciated.
> >
> > From previous experience with another brand 'R*nge R*v*r' it's better
doing
> > business in the UK as the dealers here don't stock anything.
> > Of course this has happened now as it's due it's NCT(MOT) next week.
> >
> > Thanks
> > Diverman
> > 4.0l Cherokee '93
> > 93k miles
The contacts are all clean and the straps look good. It's getting fuel and
the pumps working.
I'm getting fault code 11(no crank signal) and the sensor is giving
resistance which I think it shouldn't so this is what makes me think it's
the sensor.
--
Diverman
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:42A20A8E.BCD395AD@sympatico.ca...
> I recommend you try cleaning it's plug and socket with an electronic
> contact cleaner. They are only computer signal pins and they get
> dirty. WD40 will do as a cleaner in a pinch.
>
> One other thing to check is the ground strap from the head to the
> firewall, they also go bad at that age. I use a booster cable from the
> battery negative tot he firewall to bypass it to test it.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Diverman wrote:
> >
> > Hi Guys,
> >
> > I'm having trouble starting my Jeep. Turns over but won't start.
> > I think I've narrowed it down to the crank position sensor, everything
else
> > seems ok. From what I read they sometimes give up around now.
> > Where will I get one quick. I'm in Dublin, Ireland and the name of a
good
> > supplier in the UK would be appreciated.
> >
> > From previous experience with another brand 'R*nge R*v*r' it's better
doing
> > business in the UK as the dealers here don't stock anything.
> > Of course this has happened now as it's due it's NCT(MOT) next week.
> >
> > Thanks
> > Diverman
> > 4.0l Cherokee '93
> > 93k miles
06-04-2005, 04:58 PM
#12
Guest
Posts: n/a
Re: Crank position sensor - UK supplier please
Thanks for the quick replies.
The contacts are all clean and the straps look good. It's getting fuel and
the pumps working.
I'm getting fault code 11(no crank signal) and the sensor is giving
resistance which I think it shouldn't so this is what makes me think it's
the sensor.
--
Diverman
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:42A20A8E.BCD395AD@sympatico.ca...
> I recommend you try cleaning it's plug and socket with an electronic
> contact cleaner. They are only computer signal pins and they get
> dirty. WD40 will do as a cleaner in a pinch.
>
> One other thing to check is the ground strap from the head to the
> firewall, they also go bad at that age. I use a booster cable from the
> battery negative tot he firewall to bypass it to test it.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Diverman wrote:
> >
> > Hi Guys,
> >
> > I'm having trouble starting my Jeep. Turns over but won't start.
> > I think I've narrowed it down to the crank position sensor, everything
else
> > seems ok. From what I read they sometimes give up around now.
> > Where will I get one quick. I'm in Dublin, Ireland and the name of a
good
> > supplier in the UK would be appreciated.
> >
> > From previous experience with another brand 'R*nge R*v*r' it's better
doing
> > business in the UK as the dealers here don't stock anything.
> > Of course this has happened now as it's due it's NCT(MOT) next week.
> >
> > Thanks
> > Diverman
> > 4.0l Cherokee '93
> > 93k miles
The contacts are all clean and the straps look good. It's getting fuel and
the pumps working.
I'm getting fault code 11(no crank signal) and the sensor is giving
resistance which I think it shouldn't so this is what makes me think it's
the sensor.
--
Diverman
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:42A20A8E.BCD395AD@sympatico.ca...
> I recommend you try cleaning it's plug and socket with an electronic
> contact cleaner. They are only computer signal pins and they get
> dirty. WD40 will do as a cleaner in a pinch.
>
> One other thing to check is the ground strap from the head to the
> firewall, they also go bad at that age. I use a booster cable from the
> battery negative tot he firewall to bypass it to test it.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Diverman wrote:
> >
> > Hi Guys,
> >
> > I'm having trouble starting my Jeep. Turns over but won't start.
> > I think I've narrowed it down to the crank position sensor, everything
else
> > seems ok. From what I read they sometimes give up around now.
> > Where will I get one quick. I'm in Dublin, Ireland and the name of a
good
> > supplier in the UK would be appreciated.
> >
> > From previous experience with another brand 'R*nge R*v*r' it's better
doing
> > business in the UK as the dealers here don't stock anything.
> > Of course this has happened now as it's due it's NCT(MOT) next week.
> >
> > Thanks
> > Diverman
> > 4.0l Cherokee '93
> > 93k miles
06-04-2005, 04:58 PM
#13
Guest
Posts: n/a
Re: Crank position sensor - UK supplier please
Thanks for the quick replies.
The contacts are all clean and the straps look good. It's getting fuel and
the pumps working.
I'm getting fault code 11(no crank signal) and the sensor is giving
resistance which I think it shouldn't so this is what makes me think it's
the sensor.
--
Diverman
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:42A20A8E.BCD395AD@sympatico.ca...
> I recommend you try cleaning it's plug and socket with an electronic
> contact cleaner. They are only computer signal pins and they get
> dirty. WD40 will do as a cleaner in a pinch.
>
> One other thing to check is the ground strap from the head to the
> firewall, they also go bad at that age. I use a booster cable from the
> battery negative tot he firewall to bypass it to test it.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Diverman wrote:
> >
> > Hi Guys,
> >
> > I'm having trouble starting my Jeep. Turns over but won't start.
> > I think I've narrowed it down to the crank position sensor, everything
else
> > seems ok. From what I read they sometimes give up around now.
> > Where will I get one quick. I'm in Dublin, Ireland and the name of a
good
> > supplier in the UK would be appreciated.
> >
> > From previous experience with another brand 'R*nge R*v*r' it's better
doing
> > business in the UK as the dealers here don't stock anything.
> > Of course this has happened now as it's due it's NCT(MOT) next week.
> >
> > Thanks
> > Diverman
> > 4.0l Cherokee '93
> > 93k miles
The contacts are all clean and the straps look good. It's getting fuel and
the pumps working.
I'm getting fault code 11(no crank signal) and the sensor is giving
resistance which I think it shouldn't so this is what makes me think it's
the sensor.
--
Diverman
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:42A20A8E.BCD395AD@sympatico.ca...
> I recommend you try cleaning it's plug and socket with an electronic
> contact cleaner. They are only computer signal pins and they get
> dirty. WD40 will do as a cleaner in a pinch.
>
> One other thing to check is the ground strap from the head to the
> firewall, they also go bad at that age. I use a booster cable from the
> battery negative tot he firewall to bypass it to test it.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Diverman wrote:
> >
> > Hi Guys,
> >
> > I'm having trouble starting my Jeep. Turns over but won't start.
> > I think I've narrowed it down to the crank position sensor, everything
else
> > seems ok. From what I read they sometimes give up around now.
> > Where will I get one quick. I'm in Dublin, Ireland and the name of a
good
> > supplier in the UK would be appreciated.
> >
> > From previous experience with another brand 'R*nge R*v*r' it's better
doing
> > business in the UK as the dealers here don't stock anything.
> > Of course this has happened now as it's due it's NCT(MOT) next week.
> >
> > Thanks
> > Diverman
> > 4.0l Cherokee '93
> > 93k miles
06-04-2005, 05:57 PM
#14
Guest
Posts: n/a
Re: Crank position sensor - UK supplier please
Diverman did pass the time by typing:
> Thanks for the quick replies.
> The contacts are all clean and the straps look good. It's getting fuel and
> the pumps working.
> I'm getting fault code 11(no crank signal) and the sensor is giving
> resistance which I think it shouldn't so this is what makes me think it's
> the sensor.
Went through the same issues on my 93 ZJ.
http://www.revbeergoggles.com/cps/
You can't really see the faults with a slow sensor
unless you have a scope.
--
DougW
> Thanks for the quick replies.
> The contacts are all clean and the straps look good. It's getting fuel and
> the pumps working.
> I'm getting fault code 11(no crank signal) and the sensor is giving
> resistance which I think it shouldn't so this is what makes me think it's
> the sensor.
Went through the same issues on my 93 ZJ.
http://www.revbeergoggles.com/cps/
You can't really see the faults with a slow sensor
unless you have a scope.
--
DougW
06-04-2005, 05:57 PM
#15
Guest
Posts: n/a
Re: Crank position sensor - UK supplier please
Diverman did pass the time by typing:
> Thanks for the quick replies.
> The contacts are all clean and the straps look good. It's getting fuel and
> the pumps working.
> I'm getting fault code 11(no crank signal) and the sensor is giving
> resistance which I think it shouldn't so this is what makes me think it's
> the sensor.
Went through the same issues on my 93 ZJ.
http://www.revbeergoggles.com/cps/
You can't really see the faults with a slow sensor
unless you have a scope.
--
DougW
> Thanks for the quick replies.
> The contacts are all clean and the straps look good. It's getting fuel and
> the pumps working.
> I'm getting fault code 11(no crank signal) and the sensor is giving
> resistance which I think it shouldn't so this is what makes me think it's
> the sensor.
Went through the same issues on my 93 ZJ.
http://www.revbeergoggles.com/cps/
You can't really see the faults with a slow sensor
unless you have a scope.
--
DougW
06-04-2005, 05:57 PM
#16
Guest
Posts: n/a
Re: Crank position sensor - UK supplier please
Diverman did pass the time by typing:
> Thanks for the quick replies.
> The contacts are all clean and the straps look good. It's getting fuel and
> the pumps working.
> I'm getting fault code 11(no crank signal) and the sensor is giving
> resistance which I think it shouldn't so this is what makes me think it's
> the sensor.
Went through the same issues on my 93 ZJ.
http://www.revbeergoggles.com/cps/
You can't really see the faults with a slow sensor
unless you have a scope.
--
DougW
> Thanks for the quick replies.
> The contacts are all clean and the straps look good. It's getting fuel and
> the pumps working.
> I'm getting fault code 11(no crank signal) and the sensor is giving
> resistance which I think it shouldn't so this is what makes me think it's
> the sensor.
Went through the same issues on my 93 ZJ.
http://www.revbeergoggles.com/cps/
You can't really see the faults with a slow sensor
unless you have a scope.
--
DougW
06-04-2005, 05:57 PM
#17
Guest
Posts: n/a
Re: Crank position sensor - UK supplier please
Diverman did pass the time by typing:
> Thanks for the quick replies.
> The contacts are all clean and the straps look good. It's getting fuel and
> the pumps working.
> I'm getting fault code 11(no crank signal) and the sensor is giving
> resistance which I think it shouldn't so this is what makes me think it's
> the sensor.
Went through the same issues on my 93 ZJ.
http://www.revbeergoggles.com/cps/
You can't really see the faults with a slow sensor
unless you have a scope.
--
DougW
> Thanks for the quick replies.
> The contacts are all clean and the straps look good. It's getting fuel and
> the pumps working.
> I'm getting fault code 11(no crank signal) and the sensor is giving
> resistance which I think it shouldn't so this is what makes me think it's
> the sensor.
Went through the same issues on my 93 ZJ.
http://www.revbeergoggles.com/cps/
You can't really see the faults with a slow sensor
unless you have a scope.
--
DougW
06-11-2005, 02:55 PM
#18
Guest
Posts: n/a
Re: Crank position sensor - UK supplier please
Yes, that was it, the cps.
All fixed now.
Thanks all for the advice and thanks to Lighthouse jeep who sent me the part
very quickly.
Diverman
"Diverman" <Diverman@slapper.co.uk> wrote in message
news:d7t0me$80s$1@reader01.news.esat.net...
> Hi Guys,
>
> I'm having trouble starting my Jeep. Turns over but won't start.
> I think I've narrowed it down to the crank position sensor, everything
else
> seems ok. From what I read they sometimes give up around now.
> Where will I get one quick. I'm in Dublin, Ireland and the name of a good
> supplier in the UK would be appreciated.
>
> From previous experience with another brand 'R*nge R*v*r' it's better
doing
> business in the UK as the dealers here don't stock anything.
> Of course this has happened now as it's due it's NCT(MOT) next week.
>
> Thanks
> Diverman
> 4.0l Cherokee '93
> 93k miles
>
>
All fixed now.
Thanks all for the advice and thanks to Lighthouse jeep who sent me the part
very quickly.
Diverman
"Diverman" <Diverman@slapper.co.uk> wrote in message
news:d7t0me$80s$1@reader01.news.esat.net...
> Hi Guys,
>
> I'm having trouble starting my Jeep. Turns over but won't start.
> I think I've narrowed it down to the crank position sensor, everything
else
> seems ok. From what I read they sometimes give up around now.
> Where will I get one quick. I'm in Dublin, Ireland and the name of a good
> supplier in the UK would be appreciated.
>
> From previous experience with another brand 'R*nge R*v*r' it's better
doing
> business in the UK as the dealers here don't stock anything.
> Of course this has happened now as it's due it's NCT(MOT) next week.
>
> Thanks
> Diverman
> 4.0l Cherokee '93
> 93k miles
>
>
06-11-2005, 02:55 PM
#19
Guest
Posts: n/a
Re: Crank position sensor - UK supplier please
Yes, that was it, the cps.
All fixed now.
Thanks all for the advice and thanks to Lighthouse jeep who sent me the part
very quickly.
Diverman
"Diverman" <Diverman@slapper.co.uk> wrote in message
news:d7t0me$80s$1@reader01.news.esat.net...
> Hi Guys,
>
> I'm having trouble starting my Jeep. Turns over but won't start.
> I think I've narrowed it down to the crank position sensor, everything
else
> seems ok. From what I read they sometimes give up around now.
> Where will I get one quick. I'm in Dublin, Ireland and the name of a good
> supplier in the UK would be appreciated.
>
> From previous experience with another brand 'R*nge R*v*r' it's better
doing
> business in the UK as the dealers here don't stock anything.
> Of course this has happened now as it's due it's NCT(MOT) next week.
>
> Thanks
> Diverman
> 4.0l Cherokee '93
> 93k miles
>
>
All fixed now.
Thanks all for the advice and thanks to Lighthouse jeep who sent me the part
very quickly.
Diverman
"Diverman" <Diverman@slapper.co.uk> wrote in message
news:d7t0me$80s$1@reader01.news.esat.net...
> Hi Guys,
>
> I'm having trouble starting my Jeep. Turns over but won't start.
> I think I've narrowed it down to the crank position sensor, everything
else
> seems ok. From what I read they sometimes give up around now.
> Where will I get one quick. I'm in Dublin, Ireland and the name of a good
> supplier in the UK would be appreciated.
>
> From previous experience with another brand 'R*nge R*v*r' it's better
doing
> business in the UK as the dealers here don't stock anything.
> Of course this has happened now as it's due it's NCT(MOT) next week.
>
> Thanks
> Diverman
> 4.0l Cherokee '93
> 93k miles
>
>
06-11-2005, 02:55 PM
#20
Guest
Posts: n/a
Re: Crank position sensor - UK supplier please
Yes, that was it, the cps.
All fixed now.
Thanks all for the advice and thanks to Lighthouse jeep who sent me the part
very quickly.
Diverman
"Diverman" <Diverman@slapper.co.uk> wrote in message
news:d7t0me$80s$1@reader01.news.esat.net...
> Hi Guys,
>
> I'm having trouble starting my Jeep. Turns over but won't start.
> I think I've narrowed it down to the crank position sensor, everything
else
> seems ok. From what I read they sometimes give up around now.
> Where will I get one quick. I'm in Dublin, Ireland and the name of a good
> supplier in the UK would be appreciated.
>
> From previous experience with another brand 'R*nge R*v*r' it's better
doing
> business in the UK as the dealers here don't stock anything.
> Of course this has happened now as it's due it's NCT(MOT) next week.
>
> Thanks
> Diverman
> 4.0l Cherokee '93
> 93k miles
>
>
All fixed now.
Thanks all for the advice and thanks to Lighthouse jeep who sent me the part
very quickly.
Diverman
"Diverman" <Diverman@slapper.co.uk> wrote in message
news:d7t0me$80s$1@reader01.news.esat.net...
> Hi Guys,
>
> I'm having trouble starting my Jeep. Turns over but won't start.
> I think I've narrowed it down to the crank position sensor, everything
else
> seems ok. From what I read they sometimes give up around now.
> Where will I get one quick. I'm in Dublin, Ireland and the name of a good
> supplier in the UK would be appreciated.
>
> From previous experience with another brand 'R*nge R*v*r' it's better
doing
> business in the UK as the dealers here don't stock anything.
> Of course this has happened now as it's due it's NCT(MOT) next week.
>
> Thanks
> Diverman
> 4.0l Cherokee '93
> 93k miles
>
>