Correct Tork socket
12-10-2005, 09:51 PM
#2
Guest
Posts: n/a
Re: Correct Tork socket
I would guess a T-40 Torx head. But I wouldn't start without a set
of high quality Torx socket and bit set. And of course an impact driver
to start them out with: http://www.----------.com/impactDriver.jpg Or
you'll need a drill with bits, and tool and die set.
--
God Bless America, Bill O|||||||O
mailto:--------------------
Lovs2fly wrote:
>
> Does anyone know the correct tork socket to remove the hood hinges on a 93
> Wrangler?
>
> Thanks.
of high quality Torx socket and bit set. And of course an impact driver
to start them out with: http://www.----------.com/impactDriver.jpg Or
you'll need a drill with bits, and tool and die set.
--
God Bless America, Bill O|||||||O
mailto:--------------------
Lovs2fly wrote:
>
> Does anyone know the correct tork socket to remove the hood hinges on a 93
> Wrangler?
>
> Thanks.
12-10-2005, 09:51 PM
#3
Guest
Posts: n/a
Re: Correct Tork socket
I would guess a T-40 Torx head. But I wouldn't start without a set
of high quality Torx socket and bit set. And of course an impact driver
to start them out with: http://www.----------.com/impactDriver.jpg Or
you'll need a drill with bits, and tool and die set.
--
God Bless America, Bill O|||||||O
mailto:--------------------
Lovs2fly wrote:
>
> Does anyone know the correct tork socket to remove the hood hinges on a 93
> Wrangler?
>
> Thanks.
of high quality Torx socket and bit set. And of course an impact driver
to start them out with: http://www.----------.com/impactDriver.jpg Or
you'll need a drill with bits, and tool and die set.
--
God Bless America, Bill O|||||||O
mailto:--------------------
Lovs2fly wrote:
>
> Does anyone know the correct tork socket to remove the hood hinges on a 93
> Wrangler?
>
> Thanks.
12-10-2005, 09:51 PM
#4
Guest
Posts: n/a
Re: Correct Tork socket
I would guess a T-40 Torx head. But I wouldn't start without a set
of high quality Torx socket and bit set. And of course an impact driver
to start them out with: http://www.----------.com/impactDriver.jpg Or
you'll need a drill with bits, and tool and die set.
--
God Bless America, Bill O|||||||O
mailto:--------------------
Lovs2fly wrote:
>
> Does anyone know the correct tork socket to remove the hood hinges on a 93
> Wrangler?
>
> Thanks.
of high quality Torx socket and bit set. And of course an impact driver
to start them out with: http://www.----------.com/impactDriver.jpg Or
you'll need a drill with bits, and tool and die set.
--
God Bless America, Bill O|||||||O
mailto:--------------------
Lovs2fly wrote:
>
> Does anyone know the correct tork socket to remove the hood hinges on a 93
> Wrangler?
>
> Thanks.
12-11-2005, 03:09 AM
#5
Guest
Posts: n/a
Re: Correct Tork socket
On a vehicle that old, I would start with penetrating oil. And I would give
it a week or so to soak in.
Earle
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:439B941F.338D4AE2@***.net...
> I would guess a T-40 Torx head. But I wouldn't start without a set
> of high quality Torx socket and bit set. And of course an impact driver
> to start them out with: http://www.----------.com/impactDriver.jpg Or
> you'll need a drill with bits, and tool and die set.
> --
> God Bless America, Bill O|||||||O
> mailto:--------------------
>
> Lovs2fly wrote:
> >
> > Does anyone know the correct tork socket to remove the hood hinges on a
93
> > Wrangler?
> >
> > Thanks.
it a week or so to soak in.
Earle
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:439B941F.338D4AE2@***.net...
> I would guess a T-40 Torx head. But I wouldn't start without a set
> of high quality Torx socket and bit set. And of course an impact driver
> to start them out with: http://www.----------.com/impactDriver.jpg Or
> you'll need a drill with bits, and tool and die set.
> --
> God Bless America, Bill O|||||||O
> mailto:--------------------
>
> Lovs2fly wrote:
> >
> > Does anyone know the correct tork socket to remove the hood hinges on a
93
> > Wrangler?
> >
> > Thanks.
12-11-2005, 03:09 AM
#6
Guest
Posts: n/a
Re: Correct Tork socket
On a vehicle that old, I would start with penetrating oil. And I would give
it a week or so to soak in.
Earle
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:439B941F.338D4AE2@***.net...
> I would guess a T-40 Torx head. But I wouldn't start without a set
> of high quality Torx socket and bit set. And of course an impact driver
> to start them out with: http://www.----------.com/impactDriver.jpg Or
> you'll need a drill with bits, and tool and die set.
> --
> God Bless America, Bill O|||||||O
> mailto:--------------------
>
> Lovs2fly wrote:
> >
> > Does anyone know the correct tork socket to remove the hood hinges on a
93
> > Wrangler?
> >
> > Thanks.
it a week or so to soak in.
Earle
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:439B941F.338D4AE2@***.net...
> I would guess a T-40 Torx head. But I wouldn't start without a set
> of high quality Torx socket and bit set. And of course an impact driver
> to start them out with: http://www.----------.com/impactDriver.jpg Or
> you'll need a drill with bits, and tool and die set.
> --
> God Bless America, Bill O|||||||O
> mailto:--------------------
>
> Lovs2fly wrote:
> >
> > Does anyone know the correct tork socket to remove the hood hinges on a
93
> > Wrangler?
> >
> > Thanks.
12-11-2005, 03:09 AM
#7
Guest
Posts: n/a
Re: Correct Tork socket
On a vehicle that old, I would start with penetrating oil. And I would give
it a week or so to soak in.
Earle
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:439B941F.338D4AE2@***.net...
> I would guess a T-40 Torx head. But I wouldn't start without a set
> of high quality Torx socket and bit set. And of course an impact driver
> to start them out with: http://www.----------.com/impactDriver.jpg Or
> you'll need a drill with bits, and tool and die set.
> --
> God Bless America, Bill O|||||||O
> mailto:--------------------
>
> Lovs2fly wrote:
> >
> > Does anyone know the correct tork socket to remove the hood hinges on a
93
> > Wrangler?
> >
> > Thanks.
it a week or so to soak in.
Earle
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:439B941F.338D4AE2@***.net...
> I would guess a T-40 Torx head. But I wouldn't start without a set
> of high quality Torx socket and bit set. And of course an impact driver
> to start them out with: http://www.----------.com/impactDriver.jpg Or
> you'll need a drill with bits, and tool and die set.
> --
> God Bless America, Bill O|||||||O
> mailto:--------------------
>
> Lovs2fly wrote:
> >
> > Does anyone know the correct tork socket to remove the hood hinges on a
93
> > Wrangler?
> >
> > Thanks.
12-11-2005, 01:16 PM
#8
Guest
Posts: n/a
Re: Correct Tork socket
I just pulled a set off of an 87, I put the tool in, and gave each one 1
good crack with a hammer, they all came out fine.
"Lovs2fly" <lovs2fly@comcast.net> wrote in message
news:ucKdnd0IW72mGgbeRVn-rg@comcast.com...
> Does anyone know the correct tork socket to remove the hood hinges on a 93
> Wrangler?
>
> Thanks.
>
good crack with a hammer, they all came out fine.
"Lovs2fly" <lovs2fly@comcast.net> wrote in message
news:ucKdnd0IW72mGgbeRVn-rg@comcast.com...
> Does anyone know the correct tork socket to remove the hood hinges on a 93
> Wrangler?
>
> Thanks.
>
12-11-2005, 01:16 PM
#9
Guest
Posts: n/a
Re: Correct Tork socket
I just pulled a set off of an 87, I put the tool in, and gave each one 1
good crack with a hammer, they all came out fine.
"Lovs2fly" <lovs2fly@comcast.net> wrote in message
news:ucKdnd0IW72mGgbeRVn-rg@comcast.com...
> Does anyone know the correct tork socket to remove the hood hinges on a 93
> Wrangler?
>
> Thanks.
>
good crack with a hammer, they all came out fine.
"Lovs2fly" <lovs2fly@comcast.net> wrote in message
news:ucKdnd0IW72mGgbeRVn-rg@comcast.com...
> Does anyone know the correct tork socket to remove the hood hinges on a 93
> Wrangler?
>
> Thanks.
>
12-11-2005, 01:16 PM
#10
Guest
Posts: n/a
Re: Correct Tork socket
I just pulled a set off of an 87, I put the tool in, and gave each one 1
good crack with a hammer, they all came out fine.
"Lovs2fly" <lovs2fly@comcast.net> wrote in message
news:ucKdnd0IW72mGgbeRVn-rg@comcast.com...
> Does anyone know the correct tork socket to remove the hood hinges on a 93
> Wrangler?
>
> Thanks.
>
good crack with a hammer, they all came out fine.
"Lovs2fly" <lovs2fly@comcast.net> wrote in message
news:ucKdnd0IW72mGgbeRVn-rg@comcast.com...
> Does anyone know the correct tork socket to remove the hood hinges on a 93
> Wrangler?
>
> Thanks.
>
