Control Arm Preference?
#11
Guest
Posts: n/a
Re: Control Arm Preference?
RE adjustable control arms.
KH
"Snowboardripper" <snowboardripper@hotmail.com> wrote in message
news:72ce17be.0312020638.574d51f3@posting.google.c om...
> I own teraflex lower control arms. The problem with all of them are
> the bushings. They only lasted 1 1/2 and I have to take them off and
> replace them. This time I am using procomp bushings. The tera arms
> have grease fittings but it is only in the center of the arm. I
> tapped 2 more fittings at each end to grease it. I also blew one of
> the orings in the arm while lubbing them. The part is available at
> home depot but it takes time to remove the arm, and replace it. Other
> arms have the same problem.
KH
"Snowboardripper" <snowboardripper@hotmail.com> wrote in message
news:72ce17be.0312020638.574d51f3@posting.google.c om...
> I own teraflex lower control arms. The problem with all of them are
> the bushings. They only lasted 1 1/2 and I have to take them off and
> replace them. This time I am using procomp bushings. The tera arms
> have grease fittings but it is only in the center of the arm. I
> tapped 2 more fittings at each end to grease it. I also blew one of
> the orings in the arm while lubbing them. The part is available at
> home depot but it takes time to remove the arm, and replace it. Other
> arms have the same problem.
#12
Guest
Posts: n/a
Re: Control Arm Preference?
RE adjustable control arms.
KH
"Snowboardripper" <snowboardripper@hotmail.com> wrote in message
news:72ce17be.0312020638.574d51f3@posting.google.c om...
> I own teraflex lower control arms. The problem with all of them are
> the bushings. They only lasted 1 1/2 and I have to take them off and
> replace them. This time I am using procomp bushings. The tera arms
> have grease fittings but it is only in the center of the arm. I
> tapped 2 more fittings at each end to grease it. I also blew one of
> the orings in the arm while lubbing them. The part is available at
> home depot but it takes time to remove the arm, and replace it. Other
> arms have the same problem.
KH
"Snowboardripper" <snowboardripper@hotmail.com> wrote in message
news:72ce17be.0312020638.574d51f3@posting.google.c om...
> I own teraflex lower control arms. The problem with all of them are
> the bushings. They only lasted 1 1/2 and I have to take them off and
> replace them. This time I am using procomp bushings. The tera arms
> have grease fittings but it is only in the center of the arm. I
> tapped 2 more fittings at each end to grease it. I also blew one of
> the orings in the arm while lubbing them. The part is available at
> home depot but it takes time to remove the arm, and replace it. Other
> arms have the same problem.
#13
Guest
Posts: n/a
Re: Control Arm Preference?
RE adjustable control arms.
KH
"Snowboardripper" <snowboardripper@hotmail.com> wrote in message
news:72ce17be.0312020638.574d51f3@posting.google.c om...
> I own teraflex lower control arms. The problem with all of them are
> the bushings. They only lasted 1 1/2 and I have to take them off and
> replace them. This time I am using procomp bushings. The tera arms
> have grease fittings but it is only in the center of the arm. I
> tapped 2 more fittings at each end to grease it. I also blew one of
> the orings in the arm while lubbing them. The part is available at
> home depot but it takes time to remove the arm, and replace it. Other
> arms have the same problem.
KH
"Snowboardripper" <snowboardripper@hotmail.com> wrote in message
news:72ce17be.0312020638.574d51f3@posting.google.c om...
> I own teraflex lower control arms. The problem with all of them are
> the bushings. They only lasted 1 1/2 and I have to take them off and
> replace them. This time I am using procomp bushings. The tera arms
> have grease fittings but it is only in the center of the arm. I
> tapped 2 more fittings at each end to grease it. I also blew one of
> the orings in the arm while lubbing them. The part is available at
> home depot but it takes time to remove the arm, and replace it. Other
> arms have the same problem.
Thread
Thread Starter
Forum
Replies
Last Post
L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III
Jeep Mailing List
2
09-15-2003 05:53 PM
Jerry Bransford
Jeep Mailing List
0
09-15-2003 12:49 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)