Common Problem I just want help to confirm
04-12-2007, 06:05 PM
#11
Guest
Posts: n/a
Re: Common Problem I just want help to confirm
While I have heard they are sometimes on the passenger side the ones I have
seen were to be found on the drive's side.
We were able to reach the bolts with a quarter inch socket set and a LONG
extension from underneath. We may also have used swivels but don't recall.
http://s112.photobucket.com/albums/n...tion%20Sensor/
"Nick.DC2" <nick.dc2@gmail.com> wrote in message
news:1176414610.226295.148910@p77g2000hsh.googlegr oups.com...
> Thanks for your help bill i will be sure to try that when i get home.
> I must have looked if the wrong area i was underneath were the exhaust
> manifold come out. The plug is accessible from the the top of the
> motor correct?
>
>
>
>
>
> On Apr 12, 2:15 pm, "L.W. \(Bill\) ------ III" <billhug...@***.net>
> wrote:
>> If it is the Crankshaft Position Sensor, simply unplugging it and
>> making
>> that connection again revitalizes it for a couple more
>> times:http://jeep.off-road.com/jeep/articl....jsp?id=257990
>> God Bless America, Bill 0|||||||0
>> mailto:LW------...@aol.comhttp://www.----------.com/
>>
>> "Nick.DC2" <nick....@gmail.com> wrote in message
>>
>> news:1176409960.031745.24040@q75g2000hsh.googlegro ups.com...
>>
>> > Hello all,
>> > Today i was going to drive my jeep like every other day, I tried
>> > starting it and it just kept turnning over. The day before it was
>> > fine. But that day i did notice it took just a little longer to start
>> > then normal. Drove it around parked it and today it will not start at
>> > all.
>> > I want to double check does this symptom sound like a CPS? Its one of
>> > the most common failures listed for it to not start and the previous
>> > owner gave me a new one that he had not put in because he said the
>> > plug was undone.
>> > But the bad part about this is that i am selling this vechile soon and
>> > i need to drive it there to show them and help would be appericated
>>
>> > Thank You for your time.
>>
>> --
>> Posted via a free Usenet account fromhttp://www.teranews.com
>
>
seen were to be found on the drive's side.
We were able to reach the bolts with a quarter inch socket set and a LONG
extension from underneath. We may also have used swivels but don't recall.
http://s112.photobucket.com/albums/n...tion%20Sensor/
"Nick.DC2" <nick.dc2@gmail.com> wrote in message
news:1176414610.226295.148910@p77g2000hsh.googlegr oups.com...
> Thanks for your help bill i will be sure to try that when i get home.
> I must have looked if the wrong area i was underneath were the exhaust
> manifold come out. The plug is accessible from the the top of the
> motor correct?
>
>
>
>
>
> On Apr 12, 2:15 pm, "L.W. \(Bill\) ------ III" <billhug...@***.net>
> wrote:
>> If it is the Crankshaft Position Sensor, simply unplugging it and
>> making
>> that connection again revitalizes it for a couple more
>> times:http://jeep.off-road.com/jeep/articl....jsp?id=257990
>> God Bless America, Bill 0|||||||0
>> mailto:LW------...@aol.comhttp://www.----------.com/
>>
>> "Nick.DC2" <nick....@gmail.com> wrote in message
>>
>> news:1176409960.031745.24040@q75g2000hsh.googlegro ups.com...
>>
>> > Hello all,
>> > Today i was going to drive my jeep like every other day, I tried
>> > starting it and it just kept turnning over. The day before it was
>> > fine. But that day i did notice it took just a little longer to start
>> > then normal. Drove it around parked it and today it will not start at
>> > all.
>> > I want to double check does this symptom sound like a CPS? Its one of
>> > the most common failures listed for it to not start and the previous
>> > owner gave me a new one that he had not put in because he said the
>> > plug was undone.
>> > But the bad part about this is that i am selling this vechile soon and
>> > i need to drive it there to show them and help would be appericated
>>
>> > Thank You for your time.
>>
>> --
>> Posted via a free Usenet account fromhttp://www.teranews.com
>
>
04-12-2007, 06:05 PM
#12
Guest
Posts: n/a
Re: Common Problem I just want help to confirm
While I have heard they are sometimes on the passenger side the ones I have
seen were to be found on the drive's side.
We were able to reach the bolts with a quarter inch socket set and a LONG
extension from underneath. We may also have used swivels but don't recall.
http://s112.photobucket.com/albums/n...tion%20Sensor/
"Nick.DC2" <nick.dc2@gmail.com> wrote in message
news:1176414610.226295.148910@p77g2000hsh.googlegr oups.com...
> Thanks for your help bill i will be sure to try that when i get home.
> I must have looked if the wrong area i was underneath were the exhaust
> manifold come out. The plug is accessible from the the top of the
> motor correct?
>
>
>
>
>
> On Apr 12, 2:15 pm, "L.W. \(Bill\) ------ III" <billhug...@***.net>
> wrote:
>> If it is the Crankshaft Position Sensor, simply unplugging it and
>> making
>> that connection again revitalizes it for a couple more
>> times:http://jeep.off-road.com/jeep/articl....jsp?id=257990
>> God Bless America, Bill 0|||||||0
>> mailto:LW------...@aol.comhttp://www.----------.com/
>>
>> "Nick.DC2" <nick....@gmail.com> wrote in message
>>
>> news:1176409960.031745.24040@q75g2000hsh.googlegro ups.com...
>>
>> > Hello all,
>> > Today i was going to drive my jeep like every other day, I tried
>> > starting it and it just kept turnning over. The day before it was
>> > fine. But that day i did notice it took just a little longer to start
>> > then normal. Drove it around parked it and today it will not start at
>> > all.
>> > I want to double check does this symptom sound like a CPS? Its one of
>> > the most common failures listed for it to not start and the previous
>> > owner gave me a new one that he had not put in because he said the
>> > plug was undone.
>> > But the bad part about this is that i am selling this vechile soon and
>> > i need to drive it there to show them and help would be appericated
>>
>> > Thank You for your time.
>>
>> --
>> Posted via a free Usenet account fromhttp://www.teranews.com
>
>
seen were to be found on the drive's side.
We were able to reach the bolts with a quarter inch socket set and a LONG
extension from underneath. We may also have used swivels but don't recall.
http://s112.photobucket.com/albums/n...tion%20Sensor/
"Nick.DC2" <nick.dc2@gmail.com> wrote in message
news:1176414610.226295.148910@p77g2000hsh.googlegr oups.com...
> Thanks for your help bill i will be sure to try that when i get home.
> I must have looked if the wrong area i was underneath were the exhaust
> manifold come out. The plug is accessible from the the top of the
> motor correct?
>
>
>
>
>
> On Apr 12, 2:15 pm, "L.W. \(Bill\) ------ III" <billhug...@***.net>
> wrote:
>> If it is the Crankshaft Position Sensor, simply unplugging it and
>> making
>> that connection again revitalizes it for a couple more
>> times:http://jeep.off-road.com/jeep/articl....jsp?id=257990
>> God Bless America, Bill 0|||||||0
>> mailto:LW------...@aol.comhttp://www.----------.com/
>>
>> "Nick.DC2" <nick....@gmail.com> wrote in message
>>
>> news:1176409960.031745.24040@q75g2000hsh.googlegro ups.com...
>>
>> > Hello all,
>> > Today i was going to drive my jeep like every other day, I tried
>> > starting it and it just kept turnning over. The day before it was
>> > fine. But that day i did notice it took just a little longer to start
>> > then normal. Drove it around parked it and today it will not start at
>> > all.
>> > I want to double check does this symptom sound like a CPS? Its one of
>> > the most common failures listed for it to not start and the previous
>> > owner gave me a new one that he had not put in because he said the
>> > plug was undone.
>> > But the bad part about this is that i am selling this vechile soon and
>> > i need to drive it there to show them and help would be appericated
>>
>> > Thank You for your time.
>>
>> --
>> Posted via a free Usenet account fromhttp://www.teranews.com
>
>
04-12-2007, 06:05 PM
#13
Guest
Posts: n/a
Re: Common Problem I just want help to confirm
While I have heard they are sometimes on the passenger side the ones I have
seen were to be found on the drive's side.
We were able to reach the bolts with a quarter inch socket set and a LONG
extension from underneath. We may also have used swivels but don't recall.
http://s112.photobucket.com/albums/n...tion%20Sensor/
"Nick.DC2" <nick.dc2@gmail.com> wrote in message
news:1176414610.226295.148910@p77g2000hsh.googlegr oups.com...
> Thanks for your help bill i will be sure to try that when i get home.
> I must have looked if the wrong area i was underneath were the exhaust
> manifold come out. The plug is accessible from the the top of the
> motor correct?
>
>
>
>
>
> On Apr 12, 2:15 pm, "L.W. \(Bill\) ------ III" <billhug...@***.net>
> wrote:
>> If it is the Crankshaft Position Sensor, simply unplugging it and
>> making
>> that connection again revitalizes it for a couple more
>> times:http://jeep.off-road.com/jeep/articl....jsp?id=257990
>> God Bless America, Bill 0|||||||0
>> mailto:LW------...@aol.comhttp://www.----------.com/
>>
>> "Nick.DC2" <nick....@gmail.com> wrote in message
>>
>> news:1176409960.031745.24040@q75g2000hsh.googlegro ups.com...
>>
>> > Hello all,
>> > Today i was going to drive my jeep like every other day, I tried
>> > starting it and it just kept turnning over. The day before it was
>> > fine. But that day i did notice it took just a little longer to start
>> > then normal. Drove it around parked it and today it will not start at
>> > all.
>> > I want to double check does this symptom sound like a CPS? Its one of
>> > the most common failures listed for it to not start and the previous
>> > owner gave me a new one that he had not put in because he said the
>> > plug was undone.
>> > But the bad part about this is that i am selling this vechile soon and
>> > i need to drive it there to show them and help would be appericated
>>
>> > Thank You for your time.
>>
>> --
>> Posted via a free Usenet account fromhttp://www.teranews.com
>
>
seen were to be found on the drive's side.
We were able to reach the bolts with a quarter inch socket set and a LONG
extension from underneath. We may also have used swivels but don't recall.
http://s112.photobucket.com/albums/n...tion%20Sensor/
"Nick.DC2" <nick.dc2@gmail.com> wrote in message
news:1176414610.226295.148910@p77g2000hsh.googlegr oups.com...
> Thanks for your help bill i will be sure to try that when i get home.
> I must have looked if the wrong area i was underneath were the exhaust
> manifold come out. The plug is accessible from the the top of the
> motor correct?
>
>
>
>
>
> On Apr 12, 2:15 pm, "L.W. \(Bill\) ------ III" <billhug...@***.net>
> wrote:
>> If it is the Crankshaft Position Sensor, simply unplugging it and
>> making
>> that connection again revitalizes it for a couple more
>> times:http://jeep.off-road.com/jeep/articl....jsp?id=257990
>> God Bless America, Bill 0|||||||0
>> mailto:LW------...@aol.comhttp://www.----------.com/
>>
>> "Nick.DC2" <nick....@gmail.com> wrote in message
>>
>> news:1176409960.031745.24040@q75g2000hsh.googlegro ups.com...
>>
>> > Hello all,
>> > Today i was going to drive my jeep like every other day, I tried
>> > starting it and it just kept turnning over. The day before it was
>> > fine. But that day i did notice it took just a little longer to start
>> > then normal. Drove it around parked it and today it will not start at
>> > all.
>> > I want to double check does this symptom sound like a CPS? Its one of
>> > the most common failures listed for it to not start and the previous
>> > owner gave me a new one that he had not put in because he said the
>> > plug was undone.
>> > But the bad part about this is that i am selling this vechile soon and
>> > i need to drive it there to show them and help would be appericated
>>
>> > Thank You for your time.
>>
>> --
>> Posted via a free Usenet account fromhttp://www.teranews.com
>
>
04-12-2007, 06:44 PM
#14
Guest
Posts: n/a
Re: Common Problem I just want help to confirm
Nice work. Bookmarked, Thanks.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"billy ray" <billy_ray@SPAMfuse.net> wrote in message
news:49842$461eadc5$4831bf01$7184@FUSE.NET...
> While I have heard they are sometimes on the passenger side the ones I
have
> seen were to be found on the drive's side.
>
> We were able to reach the bolts with a quarter inch socket set and a LONG
> extension from underneath. We may also have used swivels but don't
recall.
>
>
>
http://s112.photobucket.com/albums/n...tion%20Sensor/
--
Posted via a free Usenet account from http://www.teranews.com
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"billy ray" <billy_ray@SPAMfuse.net> wrote in message
news:49842$461eadc5$4831bf01$7184@FUSE.NET...
> While I have heard they are sometimes on the passenger side the ones I
have
> seen were to be found on the drive's side.
>
> We were able to reach the bolts with a quarter inch socket set and a LONG
> extension from underneath. We may also have used swivels but don't
recall.
>
>
>
http://s112.photobucket.com/albums/n...tion%20Sensor/
--
Posted via a free Usenet account from http://www.teranews.com
04-12-2007, 06:44 PM
#15
Guest
Posts: n/a
Re: Common Problem I just want help to confirm
Nice work. Bookmarked, Thanks.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"billy ray" <billy_ray@SPAMfuse.net> wrote in message
news:49842$461eadc5$4831bf01$7184@FUSE.NET...
> While I have heard they are sometimes on the passenger side the ones I
have
> seen were to be found on the drive's side.
>
> We were able to reach the bolts with a quarter inch socket set and a LONG
> extension from underneath. We may also have used swivels but don't
recall.
>
>
>
http://s112.photobucket.com/albums/n...tion%20Sensor/
--
Posted via a free Usenet account from http://www.teranews.com
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"billy ray" <billy_ray@SPAMfuse.net> wrote in message
news:49842$461eadc5$4831bf01$7184@FUSE.NET...
> While I have heard they are sometimes on the passenger side the ones I
have
> seen were to be found on the drive's side.
>
> We were able to reach the bolts with a quarter inch socket set and a LONG
> extension from underneath. We may also have used swivels but don't
recall.
>
>
>
http://s112.photobucket.com/albums/n...tion%20Sensor/
--
Posted via a free Usenet account from http://www.teranews.com
04-12-2007, 06:44 PM
#16
Guest
Posts: n/a
Re: Common Problem I just want help to confirm
Nice work. Bookmarked, Thanks.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"billy ray" <billy_ray@SPAMfuse.net> wrote in message
news:49842$461eadc5$4831bf01$7184@FUSE.NET...
> While I have heard they are sometimes on the passenger side the ones I
have
> seen were to be found on the drive's side.
>
> We were able to reach the bolts with a quarter inch socket set and a LONG
> extension from underneath. We may also have used swivels but don't
recall.
>
>
>
http://s112.photobucket.com/albums/n...tion%20Sensor/
--
Posted via a free Usenet account from http://www.teranews.com
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"billy ray" <billy_ray@SPAMfuse.net> wrote in message
news:49842$461eadc5$4831bf01$7184@FUSE.NET...
> While I have heard they are sometimes on the passenger side the ones I
have
> seen were to be found on the drive's side.
>
> We were able to reach the bolts with a quarter inch socket set and a LONG
> extension from underneath. We may also have used swivels but don't
recall.
>
>
>
http://s112.photobucket.com/albums/n...tion%20Sensor/
--
Posted via a free Usenet account from http://www.teranews.com
04-12-2007, 07:21 PM
#17
Guest
Posts: n/a
Re: Common Problem I just want help to confirm
You want the originals?
"L.W. (Bill) ------ III" <----------@***.net> wrote in message
news:461eaac3$0$7328$88260bb3@free.teranews.com...
> Nice work. Bookmarked, Thanks.
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
>
> "billy ray" <billy_ray@SPAMfuse.net> wrote in message
> news:49842$461eadc5$4831bf01$7184@FUSE.NET...
>> While I have heard they are sometimes on the passenger side the ones I
> have
>> seen were to be found on the drive's side.
>>
>> We were able to reach the bolts with a quarter inch socket set and a LONG
>> extension from underneath. We may also have used swivels but don't
> recall.
>>
>>
>>
> http://s112.photobucket.com/albums/n...tion%20Sensor/
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
"L.W. (Bill) ------ III" <----------@***.net> wrote in message
news:461eaac3$0$7328$88260bb3@free.teranews.com...
> Nice work. Bookmarked, Thanks.
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
>
> "billy ray" <billy_ray@SPAMfuse.net> wrote in message
> news:49842$461eadc5$4831bf01$7184@FUSE.NET...
>> While I have heard they are sometimes on the passenger side the ones I
> have
>> seen were to be found on the drive's side.
>>
>> We were able to reach the bolts with a quarter inch socket set and a LONG
>> extension from underneath. We may also have used swivels but don't
> recall.
>>
>>
>>
> http://s112.photobucket.com/albums/n...tion%20Sensor/
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
04-12-2007, 07:21 PM
#18
Guest
Posts: n/a
Re: Common Problem I just want help to confirm
You want the originals?
"L.W. (Bill) ------ III" <----------@***.net> wrote in message
news:461eaac3$0$7328$88260bb3@free.teranews.com...
> Nice work. Bookmarked, Thanks.
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
>
> "billy ray" <billy_ray@SPAMfuse.net> wrote in message
> news:49842$461eadc5$4831bf01$7184@FUSE.NET...
>> While I have heard they are sometimes on the passenger side the ones I
> have
>> seen were to be found on the drive's side.
>>
>> We were able to reach the bolts with a quarter inch socket set and a LONG
>> extension from underneath. We may also have used swivels but don't
> recall.
>>
>>
>>
> http://s112.photobucket.com/albums/n...tion%20Sensor/
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
"L.W. (Bill) ------ III" <----------@***.net> wrote in message
news:461eaac3$0$7328$88260bb3@free.teranews.com...
> Nice work. Bookmarked, Thanks.
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
>
> "billy ray" <billy_ray@SPAMfuse.net> wrote in message
> news:49842$461eadc5$4831bf01$7184@FUSE.NET...
>> While I have heard they are sometimes on the passenger side the ones I
> have
>> seen were to be found on the drive's side.
>>
>> We were able to reach the bolts with a quarter inch socket set and a LONG
>> extension from underneath. We may also have used swivels but don't
> recall.
>>
>>
>>
> http://s112.photobucket.com/albums/n...tion%20Sensor/
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
04-12-2007, 07:21 PM
#19
Guest
Posts: n/a
Re: Common Problem I just want help to confirm
You want the originals?
"L.W. (Bill) ------ III" <----------@***.net> wrote in message
news:461eaac3$0$7328$88260bb3@free.teranews.com...
> Nice work. Bookmarked, Thanks.
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
>
> "billy ray" <billy_ray@SPAMfuse.net> wrote in message
> news:49842$461eadc5$4831bf01$7184@FUSE.NET...
>> While I have heard they are sometimes on the passenger side the ones I
> have
>> seen were to be found on the drive's side.
>>
>> We were able to reach the bolts with a quarter inch socket set and a LONG
>> extension from underneath. We may also have used swivels but don't
> recall.
>>
>>
>>
> http://s112.photobucket.com/albums/n...tion%20Sensor/
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
"L.W. (Bill) ------ III" <----------@***.net> wrote in message
news:461eaac3$0$7328$88260bb3@free.teranews.com...
> Nice work. Bookmarked, Thanks.
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
>
> "billy ray" <billy_ray@SPAMfuse.net> wrote in message
> news:49842$461eadc5$4831bf01$7184@FUSE.NET...
>> While I have heard they are sometimes on the passenger side the ones I
> have
>> seen were to be found on the drive's side.
>>
>> We were able to reach the bolts with a quarter inch socket set and a LONG
>> extension from underneath. We may also have used swivels but don't
> recall.
>>
>>
>>
> http://s112.photobucket.com/albums/n...tion%20Sensor/
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
04-12-2007, 07:37 PM
#20
Guest
Posts: n/a
Re: Common Problem I just want help to confirm
Your page is sufficient. Thanks.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"billy ray" <billy_ray@SPAMfuse.net> wrote in message
news:cd23c$461ebf5e$4831bf01$17005@FUSE.NET...
> You want the originals?
--
Posted via a free Usenet account from http://www.teranews.com
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"billy ray" <billy_ray@SPAMfuse.net> wrote in message
news:cd23c$461ebf5e$4831bf01$17005@FUSE.NET...
> You want the originals?
--
Posted via a free Usenet account from http://www.teranews.com