color matching
#11
Guest
Posts: n/a
Re: color matching
Well the simple thing here is to find a nice big deep mud hole and drive you
J**P through it doing about 60 mph with the trailer connected... the
ensuing splash and "shlup" of spraying mud should cover about 70% of the
trailer, repeat until it has that look you want, then don't ever wash it
again.. :-)
Snow...
"Nathan W. Collier" <JeepChat@7SlotGrille.com> wrote in message
news:vkmeb.10378$5r1.9907@twister.southeast.rr.com ...
> im wondering if there is an existing rattle can color that would be a
close
> enough match to the current jeep khaki to pass off as a "matching" color.
i
> want to paint a trailer to match my jeep.
> thanks,
>
> --
> Nathan W. Collier
> http://7SlotGrille.com
>
>
>
J**P through it doing about 60 mph with the trailer connected... the
ensuing splash and "shlup" of spraying mud should cover about 70% of the
trailer, repeat until it has that look you want, then don't ever wash it
again.. :-)
Snow...
"Nathan W. Collier" <JeepChat@7SlotGrille.com> wrote in message
news:vkmeb.10378$5r1.9907@twister.southeast.rr.com ...
> im wondering if there is an existing rattle can color that would be a
close
> enough match to the current jeep khaki to pass off as a "matching" color.
i
> want to paint a trailer to match my jeep.
> thanks,
>
> --
> Nathan W. Collier
> http://7SlotGrille.com
>
>
>
#12
Guest
Posts: n/a
Re: color matching
Nathan W. Collier did pass the time by typing:
> "Lon Stowell" wrote ...
>> There are always the duplicolor types, but aren't they just a tad
>> on the overpriced side?
>
> im not worried about the cost really, so much as i am ensuring a close
> match. since in not moving until next may/june anyway im going to start
> hauling welding equipment around with my jeep and a matching trailer color
> (and even equipment) can make a "first impression" difference.
> thanks lon,
I'd check out a local auto painter. You might be able to get a skuff-n-shoot
done for $100 or so. But you have to do all the prep work.
Prep work is 90% of the paintjob.
--
DougW
> "Lon Stowell" wrote ...
>> There are always the duplicolor types, but aren't they just a tad
>> on the overpriced side?
>
> im not worried about the cost really, so much as i am ensuring a close
> match. since in not moving until next may/june anyway im going to start
> hauling welding equipment around with my jeep and a matching trailer color
> (and even equipment) can make a "first impression" difference.
> thanks lon,
I'd check out a local auto painter. You might be able to get a skuff-n-shoot
done for $100 or so. But you have to do all the prep work.
Prep work is 90% of the paintjob.
--
DougW
#13
Guest
Posts: n/a
Re: color matching
Nathan W. Collier did pass the time by typing:
> "Lon Stowell" wrote ...
>> There are always the duplicolor types, but aren't they just a tad
>> on the overpriced side?
>
> im not worried about the cost really, so much as i am ensuring a close
> match. since in not moving until next may/june anyway im going to start
> hauling welding equipment around with my jeep and a matching trailer color
> (and even equipment) can make a "first impression" difference.
> thanks lon,
I'd check out a local auto painter. You might be able to get a skuff-n-shoot
done for $100 or so. But you have to do all the prep work.
Prep work is 90% of the paintjob.
--
DougW
> "Lon Stowell" wrote ...
>> There are always the duplicolor types, but aren't they just a tad
>> on the overpriced side?
>
> im not worried about the cost really, so much as i am ensuring a close
> match. since in not moving until next may/june anyway im going to start
> hauling welding equipment around with my jeep and a matching trailer color
> (and even equipment) can make a "first impression" difference.
> thanks lon,
I'd check out a local auto painter. You might be able to get a skuff-n-shoot
done for $100 or so. But you have to do all the prep work.
Prep work is 90% of the paintjob.
--
DougW
#14
Guest
Posts: n/a
Re: color matching
Hi Sandman,
The Pep Boys out here carry a whole wall of the full sized spray
cans, but if your trailer has any size at all and you want to paint it
inside and out, it'll probably take a gallon, try an auto paint store
and have them mix an exact match. I like the enamel and hardener sold by
Sherwin Williams, it's easy to paint without runs or that orange peel
look: http://www.sherwin-automotive.com/
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
"Nathan W. Collier" wrote:
>
> im wondering if there is an existing rattle can color that would be a close
> enough match to the current jeep khaki to pass off as a "matching" color. i
> want to paint a trailer to match my jeep.
> thanks,
>
> --
> Nathan W. Collier
> http://7SlotGrille.com
The Pep Boys out here carry a whole wall of the full sized spray
cans, but if your trailer has any size at all and you want to paint it
inside and out, it'll probably take a gallon, try an auto paint store
and have them mix an exact match. I like the enamel and hardener sold by
Sherwin Williams, it's easy to paint without runs or that orange peel
look: http://www.sherwin-automotive.com/
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
"Nathan W. Collier" wrote:
>
> im wondering if there is an existing rattle can color that would be a close
> enough match to the current jeep khaki to pass off as a "matching" color. i
> want to paint a trailer to match my jeep.
> thanks,
>
> --
> Nathan W. Collier
> http://7SlotGrille.com
#15
Guest
Posts: n/a
Re: color matching
Hi Sandman,
The Pep Boys out here carry a whole wall of the full sized spray
cans, but if your trailer has any size at all and you want to paint it
inside and out, it'll probably take a gallon, try an auto paint store
and have them mix an exact match. I like the enamel and hardener sold by
Sherwin Williams, it's easy to paint without runs or that orange peel
look: http://www.sherwin-automotive.com/
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
"Nathan W. Collier" wrote:
>
> im wondering if there is an existing rattle can color that would be a close
> enough match to the current jeep khaki to pass off as a "matching" color. i
> want to paint a trailer to match my jeep.
> thanks,
>
> --
> Nathan W. Collier
> http://7SlotGrille.com
The Pep Boys out here carry a whole wall of the full sized spray
cans, but if your trailer has any size at all and you want to paint it
inside and out, it'll probably take a gallon, try an auto paint store
and have them mix an exact match. I like the enamel and hardener sold by
Sherwin Williams, it's easy to paint without runs or that orange peel
look: http://www.sherwin-automotive.com/
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
"Nathan W. Collier" wrote:
>
> im wondering if there is an existing rattle can color that would be a close
> enough match to the current jeep khaki to pass off as a "matching" color. i
> want to paint a trailer to match my jeep.
> thanks,
>
> --
> Nathan W. Collier
> http://7SlotGrille.com
#16
Guest
Posts: n/a
Re: color matching
"DougW" <post.replies@invalid.address> wrote in message
news:pUmeb.1245$Gb.545@news2.central.***.net...
> I'd check out a local auto painter. You might be able to get a
skuff-n-shoot
> done for $100 or so. But you have to do all the prep work.
its really gotta be rattle can. work trailers dont stay "pretty" for very
long, and i dont want to have to worry about scratching it because id have
to take it back to get it touched up as needed. if i can find a rattle can
thats a close enough match, problem solved.
--
Nathan W. Collier
http://7SlotGrille.com
news:pUmeb.1245$Gb.545@news2.central.***.net...
> I'd check out a local auto painter. You might be able to get a
skuff-n-shoot
> done for $100 or so. But you have to do all the prep work.
its really gotta be rattle can. work trailers dont stay "pretty" for very
long, and i dont want to have to worry about scratching it because id have
to take it back to get it touched up as needed. if i can find a rattle can
thats a close enough match, problem solved.
--
Nathan W. Collier
http://7SlotGrille.com
#17
Guest
Posts: n/a
Re: color matching
"DougW" <post.replies@invalid.address> wrote in message
news:pUmeb.1245$Gb.545@news2.central.***.net...
> I'd check out a local auto painter. You might be able to get a
skuff-n-shoot
> done for $100 or so. But you have to do all the prep work.
its really gotta be rattle can. work trailers dont stay "pretty" for very
long, and i dont want to have to worry about scratching it because id have
to take it back to get it touched up as needed. if i can find a rattle can
thats a close enough match, problem solved.
--
Nathan W. Collier
http://7SlotGrille.com
news:pUmeb.1245$Gb.545@news2.central.***.net...
> I'd check out a local auto painter. You might be able to get a
skuff-n-shoot
> done for $100 or so. But you have to do all the prep work.
its really gotta be rattle can. work trailers dont stay "pretty" for very
long, and i dont want to have to worry about scratching it because id have
to take it back to get it touched up as needed. if i can find a rattle can
thats a close enough match, problem solved.
--
Nathan W. Collier
http://7SlotGrille.com
#18
Guest
Posts: n/a
Re: color matching
Approximately 9/30/03 14:50, DougW uttered for posterity:
> Nathan W. Collier did pass the time by typing:
>> "Lon Stowell" wrote ...
>>> There are always the duplicolor types, but aren't they just a tad
>>> on the overpriced side?
>>
>> im not worried about the cost really, so much as i am ensuring a close
>> match. since in not moving until next may/june anyway im going to start
>> hauling welding equipment around with my jeep and a matching trailer color
>> (and even equipment) can make a "first impression" difference.
>> thanks lon,
>
> I'd check out a local auto painter. You might be able to get a skuff-n-shoot
> done for $100 or so. But you have to do all the prep work.
>
> Prep work is 90% of the paintjob.
>
I'd probably just let a professional paint it with a good
tough paint if it were my business.... say an epoxy job.
The dealers carry small cans of matching paint if money
truly is no object. The local parts guy is honest that they
are much cheaper down the street at Kragen, etc.
And if money truly is no object, what are your feelings
about adopting someone old enough to be your grandfather? >:-)
> Nathan W. Collier did pass the time by typing:
>> "Lon Stowell" wrote ...
>>> There are always the duplicolor types, but aren't they just a tad
>>> on the overpriced side?
>>
>> im not worried about the cost really, so much as i am ensuring a close
>> match. since in not moving until next may/june anyway im going to start
>> hauling welding equipment around with my jeep and a matching trailer color
>> (and even equipment) can make a "first impression" difference.
>> thanks lon,
>
> I'd check out a local auto painter. You might be able to get a skuff-n-shoot
> done for $100 or so. But you have to do all the prep work.
>
> Prep work is 90% of the paintjob.
>
I'd probably just let a professional paint it with a good
tough paint if it were my business.... say an epoxy job.
The dealers carry small cans of matching paint if money
truly is no object. The local parts guy is honest that they
are much cheaper down the street at Kragen, etc.
And if money truly is no object, what are your feelings
about adopting someone old enough to be your grandfather? >:-)
#19
Guest
Posts: n/a
Re: color matching
Approximately 9/30/03 14:50, DougW uttered for posterity:
> Nathan W. Collier did pass the time by typing:
>> "Lon Stowell" wrote ...
>>> There are always the duplicolor types, but aren't they just a tad
>>> on the overpriced side?
>>
>> im not worried about the cost really, so much as i am ensuring a close
>> match. since in not moving until next may/june anyway im going to start
>> hauling welding equipment around with my jeep and a matching trailer color
>> (and even equipment) can make a "first impression" difference.
>> thanks lon,
>
> I'd check out a local auto painter. You might be able to get a skuff-n-shoot
> done for $100 or so. But you have to do all the prep work.
>
> Prep work is 90% of the paintjob.
>
I'd probably just let a professional paint it with a good
tough paint if it were my business.... say an epoxy job.
The dealers carry small cans of matching paint if money
truly is no object. The local parts guy is honest that they
are much cheaper down the street at Kragen, etc.
And if money truly is no object, what are your feelings
about adopting someone old enough to be your grandfather? >:-)
> Nathan W. Collier did pass the time by typing:
>> "Lon Stowell" wrote ...
>>> There are always the duplicolor types, but aren't they just a tad
>>> on the overpriced side?
>>
>> im not worried about the cost really, so much as i am ensuring a close
>> match. since in not moving until next may/june anyway im going to start
>> hauling welding equipment around with my jeep and a matching trailer color
>> (and even equipment) can make a "first impression" difference.
>> thanks lon,
>
> I'd check out a local auto painter. You might be able to get a skuff-n-shoot
> done for $100 or so. But you have to do all the prep work.
>
> Prep work is 90% of the paintjob.
>
I'd probably just let a professional paint it with a good
tough paint if it were my business.... say an epoxy job.
The dealers carry small cans of matching paint if money
truly is no object. The local parts guy is honest that they
are much cheaper down the street at Kragen, etc.
And if money truly is no object, what are your feelings
about adopting someone old enough to be your grandfather? >:-)
#20
Guest
Posts: n/a
Re: color matching
"Snow" <snowball_2004@msn.com> wrote in message
news:YNmeb.2328$r.448226@news20.bellglobal.com...
> Well the simple thing here is to find a nice big deep mud hole and drive
you
> J**P through it doing about 60 mph with the trailer connected... the
> ensuing splash and "shlup" of spraying mud should cover about 70% of the
> trailer, repeat until it has that look you want, then don't ever wash it
> again.. :-)
while that sure sounds fun, keep in mind that sitting on the trailer will be
a $3k - $20k welding machine that doesnt play nice with mud.
--
Nathan W. Collier
http://7SlotGrille.com
news:YNmeb.2328$r.448226@news20.bellglobal.com...
> Well the simple thing here is to find a nice big deep mud hole and drive
you
> J**P through it doing about 60 mph with the trailer connected... the
> ensuing splash and "shlup" of spraying mud should cover about 70% of the
> trailer, repeat until it has that look you want, then don't ever wash it
> again.. :-)
while that sure sounds fun, keep in mind that sitting on the trailer will be
a $3k - $20k welding machine that doesnt play nice with mud.
--
Nathan W. Collier
http://7SlotGrille.com