Coil?
Guest
Posts: n/a
Coil?
I'm thinking about changing the ignition coil in my '75 CJ5 258. It appears
to be an original. Any recommendations? A while back Mike R. said he'd
installed an Accel Super Coil in his Jeep. If I went with that particular
model I wouldn't have a good mounting bracket or place for it unless it
comes with a replacement bracket of it's own. There is a model that appears
to be a similar size and shape both in an Accel and MSD make which should
fit my mounting bracket. Please send recommendations either pro's or con's
of units.
Thanks Always,
Paul
to be an original. Any recommendations? A while back Mike R. said he'd
installed an Accel Super Coil in his Jeep. If I went with that particular
model I wouldn't have a good mounting bracket or place for it unless it
comes with a replacement bracket of it's own. There is a model that appears
to be a similar size and shape both in an Accel and MSD make which should
fit my mounting bracket. Please send recommendations either pro's or con's
of units.
Thanks Always,
Paul
Guest
Posts: n/a
Re: Coil?
Mine came with a bracket.
Mike
Paul Brogren wrote:
>
> I'm thinking about changing the ignition coil in my '75 CJ5 258. It appears
> to be an original. Any recommendations? A while back Mike R. said he'd
> installed an Accel Super Coil in his Jeep. If I went with that particular
> model I wouldn't have a good mounting bracket or place for it unless it
> comes with a replacement bracket of it's own. There is a model that appears
> to be a similar size and shape both in an Accel and MSD make which should
> fit my mounting bracket. Please send recommendations either pro's or con's
> of units.
>
> Thanks Always,
> Paul
Mike
Paul Brogren wrote:
>
> I'm thinking about changing the ignition coil in my '75 CJ5 258. It appears
> to be an original. Any recommendations? A while back Mike R. said he'd
> installed an Accel Super Coil in his Jeep. If I went with that particular
> model I wouldn't have a good mounting bracket or place for it unless it
> comes with a replacement bracket of it's own. There is a model that appears
> to be a similar size and shape both in an Accel and MSD make which should
> fit my mounting bracket. Please send recommendations either pro's or con's
> of units.
>
> Thanks Always,
> Paul
Guest
Posts: n/a
Re: Coil?
Mine came with a bracket.
Mike
Paul Brogren wrote:
>
> I'm thinking about changing the ignition coil in my '75 CJ5 258. It appears
> to be an original. Any recommendations? A while back Mike R. said he'd
> installed an Accel Super Coil in his Jeep. If I went with that particular
> model I wouldn't have a good mounting bracket or place for it unless it
> comes with a replacement bracket of it's own. There is a model that appears
> to be a similar size and shape both in an Accel and MSD make which should
> fit my mounting bracket. Please send recommendations either pro's or con's
> of units.
>
> Thanks Always,
> Paul
Mike
Paul Brogren wrote:
>
> I'm thinking about changing the ignition coil in my '75 CJ5 258. It appears
> to be an original. Any recommendations? A while back Mike R. said he'd
> installed an Accel Super Coil in his Jeep. If I went with that particular
> model I wouldn't have a good mounting bracket or place for it unless it
> comes with a replacement bracket of it's own. There is a model that appears
> to be a similar size and shape both in an Accel and MSD make which should
> fit my mounting bracket. Please send recommendations either pro's or con's
> of units.
>
> Thanks Always,
> Paul
Guest
Posts: n/a
Re: Coil?
Mine came with a bracket.
Mike
Paul Brogren wrote:
>
> I'm thinking about changing the ignition coil in my '75 CJ5 258. It appears
> to be an original. Any recommendations? A while back Mike R. said he'd
> installed an Accel Super Coil in his Jeep. If I went with that particular
> model I wouldn't have a good mounting bracket or place for it unless it
> comes with a replacement bracket of it's own. There is a model that appears
> to be a similar size and shape both in an Accel and MSD make which should
> fit my mounting bracket. Please send recommendations either pro's or con's
> of units.
>
> Thanks Always,
> Paul
Mike
Paul Brogren wrote:
>
> I'm thinking about changing the ignition coil in my '75 CJ5 258. It appears
> to be an original. Any recommendations? A while back Mike R. said he'd
> installed an Accel Super Coil in his Jeep. If I went with that particular
> model I wouldn't have a good mounting bracket or place for it unless it
> comes with a replacement bracket of it's own. There is a model that appears
> to be a similar size and shape both in an Accel and MSD make which should
> fit my mounting bracket. Please send recommendations either pro's or con's
> of units.
>
> Thanks Always,
> Paul
Guest
Posts: n/a
Re: Coil?
Thanks Mike,
So this bracket that comes with it mounts to that same spot as the original
correct? Also, I can't remember what you'd mentioned in regards to the
dist. cap and wire set? I have NAPA premium cap, rotor, and wires. These
should be ok for the voltage increase right?
Thanks,
Paul
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4017F4DD.2A6E0267@sympatico.ca...
> Mine came with a bracket.
>
> Mike
>
> Paul Brogren wrote:
> >
> > I'm thinking about changing the ignition coil in my '75 CJ5 258. It
appears
> > to be an original. Any recommendations? A while back Mike R. said he'd
> > installed an Accel Super Coil in his Jeep. If I went with that
particular
> > model I wouldn't have a good mounting bracket or place for it unless it
> > comes with a replacement bracket of it's own. There is a model that
appears
> > to be a similar size and shape both in an Accel and MSD make which
should
> > fit my mounting bracket. Please send recommendations either pro's or
con's
> > of units.
> >
> > Thanks Always,
> > Paul
So this bracket that comes with it mounts to that same spot as the original
correct? Also, I can't remember what you'd mentioned in regards to the
dist. cap and wire set? I have NAPA premium cap, rotor, and wires. These
should be ok for the voltage increase right?
Thanks,
Paul
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4017F4DD.2A6E0267@sympatico.ca...
> Mine came with a bracket.
>
> Mike
>
> Paul Brogren wrote:
> >
> > I'm thinking about changing the ignition coil in my '75 CJ5 258. It
appears
> > to be an original. Any recommendations? A while back Mike R. said he'd
> > installed an Accel Super Coil in his Jeep. If I went with that
particular
> > model I wouldn't have a good mounting bracket or place for it unless it
> > comes with a replacement bracket of it's own. There is a model that
appears
> > to be a similar size and shape both in an Accel and MSD make which
should
> > fit my mounting bracket. Please send recommendations either pro's or
con's
> > of units.
> >
> > Thanks Always,
> > Paul
Guest
Posts: n/a
Re: Coil?
Thanks Mike,
So this bracket that comes with it mounts to that same spot as the original
correct? Also, I can't remember what you'd mentioned in regards to the
dist. cap and wire set? I have NAPA premium cap, rotor, and wires. These
should be ok for the voltage increase right?
Thanks,
Paul
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4017F4DD.2A6E0267@sympatico.ca...
> Mine came with a bracket.
>
> Mike
>
> Paul Brogren wrote:
> >
> > I'm thinking about changing the ignition coil in my '75 CJ5 258. It
appears
> > to be an original. Any recommendations? A while back Mike R. said he'd
> > installed an Accel Super Coil in his Jeep. If I went with that
particular
> > model I wouldn't have a good mounting bracket or place for it unless it
> > comes with a replacement bracket of it's own. There is a model that
appears
> > to be a similar size and shape both in an Accel and MSD make which
should
> > fit my mounting bracket. Please send recommendations either pro's or
con's
> > of units.
> >
> > Thanks Always,
> > Paul
So this bracket that comes with it mounts to that same spot as the original
correct? Also, I can't remember what you'd mentioned in regards to the
dist. cap and wire set? I have NAPA premium cap, rotor, and wires. These
should be ok for the voltage increase right?
Thanks,
Paul
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4017F4DD.2A6E0267@sympatico.ca...
> Mine came with a bracket.
>
> Mike
>
> Paul Brogren wrote:
> >
> > I'm thinking about changing the ignition coil in my '75 CJ5 258. It
appears
> > to be an original. Any recommendations? A while back Mike R. said he'd
> > installed an Accel Super Coil in his Jeep. If I went with that
particular
> > model I wouldn't have a good mounting bracket or place for it unless it
> > comes with a replacement bracket of it's own. There is a model that
appears
> > to be a similar size and shape both in an Accel and MSD make which
should
> > fit my mounting bracket. Please send recommendations either pro's or
con's
> > of units.
> >
> > Thanks Always,
> > Paul
Guest
Posts: n/a
Re: Coil?
Thanks Mike,
So this bracket that comes with it mounts to that same spot as the original
correct? Also, I can't remember what you'd mentioned in regards to the
dist. cap and wire set? I have NAPA premium cap, rotor, and wires. These
should be ok for the voltage increase right?
Thanks,
Paul
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4017F4DD.2A6E0267@sympatico.ca...
> Mine came with a bracket.
>
> Mike
>
> Paul Brogren wrote:
> >
> > I'm thinking about changing the ignition coil in my '75 CJ5 258. It
appears
> > to be an original. Any recommendations? A while back Mike R. said he'd
> > installed an Accel Super Coil in his Jeep. If I went with that
particular
> > model I wouldn't have a good mounting bracket or place for it unless it
> > comes with a replacement bracket of it's own. There is a model that
appears
> > to be a similar size and shape both in an Accel and MSD make which
should
> > fit my mounting bracket. Please send recommendations either pro's or
con's
> > of units.
> >
> > Thanks Always,
> > Paul
So this bracket that comes with it mounts to that same spot as the original
correct? Also, I can't remember what you'd mentioned in regards to the
dist. cap and wire set? I have NAPA premium cap, rotor, and wires. These
should be ok for the voltage increase right?
Thanks,
Paul
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4017F4DD.2A6E0267@sympatico.ca...
> Mine came with a bracket.
>
> Mike
>
> Paul Brogren wrote:
> >
> > I'm thinking about changing the ignition coil in my '75 CJ5 258. It
appears
> > to be an original. Any recommendations? A while back Mike R. said he'd
> > installed an Accel Super Coil in his Jeep. If I went with that
particular
> > model I wouldn't have a good mounting bracket or place for it unless it
> > comes with a replacement bracket of it's own. There is a model that
appears
> > to be a similar size and shape both in an Accel and MSD make which
should
> > fit my mounting bracket. Please send recommendations either pro's or
con's
> > of units.
> >
> > Thanks Always,
> > Paul
Guest
Posts: n/a
Re: Coil?
Yes, the accel cap and wires were crap. I am running Mopar.
The coil bracket just fits in the same holes as the stock one.
Mike
Paul Brogren wrote:
>
> Thanks Mike,
>
> So this bracket that comes with it mounts to that same spot as the original
> correct? Also, I can't remember what you'd mentioned in regards to the
> dist. cap and wire set? I have NAPA premium cap, rotor, and wires. These
> should be ok for the voltage increase right?
>
> Thanks,
> Paul
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:4017F4DD.2A6E0267@sympatico.ca...
> > Mine came with a bracket.
> >
> > Mike
> >
> > Paul Brogren wrote:
> > >
> > > I'm thinking about changing the ignition coil in my '75 CJ5 258. It
> appears
> > > to be an original. Any recommendations? A while back Mike R. said he'd
> > > installed an Accel Super Coil in his Jeep. If I went with that
> particular
> > > model I wouldn't have a good mounting bracket or place for it unless it
> > > comes with a replacement bracket of it's own. There is a model that
> appears
> > > to be a similar size and shape both in an Accel and MSD make which
> should
> > > fit my mounting bracket. Please send recommendations either pro's or
> con's
> > > of units.
> > >
> > > Thanks Always,
> > > Paul
The coil bracket just fits in the same holes as the stock one.
Mike
Paul Brogren wrote:
>
> Thanks Mike,
>
> So this bracket that comes with it mounts to that same spot as the original
> correct? Also, I can't remember what you'd mentioned in regards to the
> dist. cap and wire set? I have NAPA premium cap, rotor, and wires. These
> should be ok for the voltage increase right?
>
> Thanks,
> Paul
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:4017F4DD.2A6E0267@sympatico.ca...
> > Mine came with a bracket.
> >
> > Mike
> >
> > Paul Brogren wrote:
> > >
> > > I'm thinking about changing the ignition coil in my '75 CJ5 258. It
> appears
> > > to be an original. Any recommendations? A while back Mike R. said he'd
> > > installed an Accel Super Coil in his Jeep. If I went with that
> particular
> > > model I wouldn't have a good mounting bracket or place for it unless it
> > > comes with a replacement bracket of it's own. There is a model that
> appears
> > > to be a similar size and shape both in an Accel and MSD make which
> should
> > > fit my mounting bracket. Please send recommendations either pro's or
> con's
> > > of units.
> > >
> > > Thanks Always,
> > > Paul
Guest
Posts: n/a
Re: Coil?
Yes, the accel cap and wires were crap. I am running Mopar.
The coil bracket just fits in the same holes as the stock one.
Mike
Paul Brogren wrote:
>
> Thanks Mike,
>
> So this bracket that comes with it mounts to that same spot as the original
> correct? Also, I can't remember what you'd mentioned in regards to the
> dist. cap and wire set? I have NAPA premium cap, rotor, and wires. These
> should be ok for the voltage increase right?
>
> Thanks,
> Paul
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:4017F4DD.2A6E0267@sympatico.ca...
> > Mine came with a bracket.
> >
> > Mike
> >
> > Paul Brogren wrote:
> > >
> > > I'm thinking about changing the ignition coil in my '75 CJ5 258. It
> appears
> > > to be an original. Any recommendations? A while back Mike R. said he'd
> > > installed an Accel Super Coil in his Jeep. If I went with that
> particular
> > > model I wouldn't have a good mounting bracket or place for it unless it
> > > comes with a replacement bracket of it's own. There is a model that
> appears
> > > to be a similar size and shape both in an Accel and MSD make which
> should
> > > fit my mounting bracket. Please send recommendations either pro's or
> con's
> > > of units.
> > >
> > > Thanks Always,
> > > Paul
The coil bracket just fits in the same holes as the stock one.
Mike
Paul Brogren wrote:
>
> Thanks Mike,
>
> So this bracket that comes with it mounts to that same spot as the original
> correct? Also, I can't remember what you'd mentioned in regards to the
> dist. cap and wire set? I have NAPA premium cap, rotor, and wires. These
> should be ok for the voltage increase right?
>
> Thanks,
> Paul
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:4017F4DD.2A6E0267@sympatico.ca...
> > Mine came with a bracket.
> >
> > Mike
> >
> > Paul Brogren wrote:
> > >
> > > I'm thinking about changing the ignition coil in my '75 CJ5 258. It
> appears
> > > to be an original. Any recommendations? A while back Mike R. said he'd
> > > installed an Accel Super Coil in his Jeep. If I went with that
> particular
> > > model I wouldn't have a good mounting bracket or place for it unless it
> > > comes with a replacement bracket of it's own. There is a model that
> appears
> > > to be a similar size and shape both in an Accel and MSD make which
> should
> > > fit my mounting bracket. Please send recommendations either pro's or
> con's
> > > of units.
> > >
> > > Thanks Always,
> > > Paul
Guest
Posts: n/a
Re: Coil?
Yes, the accel cap and wires were crap. I am running Mopar.
The coil bracket just fits in the same holes as the stock one.
Mike
Paul Brogren wrote:
>
> Thanks Mike,
>
> So this bracket that comes with it mounts to that same spot as the original
> correct? Also, I can't remember what you'd mentioned in regards to the
> dist. cap and wire set? I have NAPA premium cap, rotor, and wires. These
> should be ok for the voltage increase right?
>
> Thanks,
> Paul
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:4017F4DD.2A6E0267@sympatico.ca...
> > Mine came with a bracket.
> >
> > Mike
> >
> > Paul Brogren wrote:
> > >
> > > I'm thinking about changing the ignition coil in my '75 CJ5 258. It
> appears
> > > to be an original. Any recommendations? A while back Mike R. said he'd
> > > installed an Accel Super Coil in his Jeep. If I went with that
> particular
> > > model I wouldn't have a good mounting bracket or place for it unless it
> > > comes with a replacement bracket of it's own. There is a model that
> appears
> > > to be a similar size and shape both in an Accel and MSD make which
> should
> > > fit my mounting bracket. Please send recommendations either pro's or
> con's
> > > of units.
> > >
> > > Thanks Always,
> > > Paul
The coil bracket just fits in the same holes as the stock one.
Mike
Paul Brogren wrote:
>
> Thanks Mike,
>
> So this bracket that comes with it mounts to that same spot as the original
> correct? Also, I can't remember what you'd mentioned in regards to the
> dist. cap and wire set? I have NAPA premium cap, rotor, and wires. These
> should be ok for the voltage increase right?
>
> Thanks,
> Paul
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:4017F4DD.2A6E0267@sympatico.ca...
> > Mine came with a bracket.
> >
> > Mike
> >
> > Paul Brogren wrote:
> > >
> > > I'm thinking about changing the ignition coil in my '75 CJ5 258. It
> appears
> > > to be an original. Any recommendations? A while back Mike R. said he'd
> > > installed an Accel Super Coil in his Jeep. If I went with that
> particular
> > > model I wouldn't have a good mounting bracket or place for it unless it
> > > comes with a replacement bracket of it's own. There is a model that
> appears
> > > to be a similar size and shape both in an Accel and MSD make which
> should
> > > fit my mounting bracket. Please send recommendations either pro's or
> con's
> > > of units.
> > >
> > > Thanks Always,
> > > Paul
Thread
Thread Starter
Forum
Replies
Last Post
paul
Jeep Mailing List
0
Jul 26, 2004 08:01 AM
Mike Romain
Jeep Mailing List
108
May 8, 2004 06:54 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
