Code P0301
#71
Guest
Posts: n/a
Re: Code P0301
In article <ue72129j3675sfmetngfl68thg7epecccd@4ax.com>,
bllsht <nospam@dot.net> wrote:
#Man, I gotta get me one of those magic in-line 6 engines. Missing spark and you
#wouldn't even notice?
Whatever floats your boat, if you think I'm wrong, then maybe I am. Have you
tried it? Prolly not. Have I? Not on purpose.
All I know is that I had a plug wire disconnect on a 4.7 v8 and it was not all
that noticable until some load was put on it (the light and code retrival told
me more than anything else). I also had a 4.2 i6 with no effective compression
on one cylinder and I did not notice anything unless some load was put on it.
FWIW, the new Hemis idle on only on 4 cylinders.
Shrug,
/herb
bllsht <nospam@dot.net> wrote:
#Man, I gotta get me one of those magic in-line 6 engines. Missing spark and you
#wouldn't even notice?
Whatever floats your boat, if you think I'm wrong, then maybe I am. Have you
tried it? Prolly not. Have I? Not on purpose.
All I know is that I had a plug wire disconnect on a 4.7 v8 and it was not all
that noticable until some load was put on it (the light and code retrival told
me more than anything else). I also had a 4.2 i6 with no effective compression
on one cylinder and I did not notice anything unless some load was put on it.
FWIW, the new Hemis idle on only on 4 cylinders.
Shrug,
/herb
#72
Guest
Posts: n/a
Re: Code P0301
In article <ue72129j3675sfmetngfl68thg7epecccd@4ax.com>,
bllsht <nospam@dot.net> wrote:
#Man, I gotta get me one of those magic in-line 6 engines. Missing spark and you
#wouldn't even notice?
Whatever floats your boat, if you think I'm wrong, then maybe I am. Have you
tried it? Prolly not. Have I? Not on purpose.
All I know is that I had a plug wire disconnect on a 4.7 v8 and it was not all
that noticable until some load was put on it (the light and code retrival told
me more than anything else). I also had a 4.2 i6 with no effective compression
on one cylinder and I did not notice anything unless some load was put on it.
FWIW, the new Hemis idle on only on 4 cylinders.
Shrug,
/herb
bllsht <nospam@dot.net> wrote:
#Man, I gotta get me one of those magic in-line 6 engines. Missing spark and you
#wouldn't even notice?
Whatever floats your boat, if you think I'm wrong, then maybe I am. Have you
tried it? Prolly not. Have I? Not on purpose.
All I know is that I had a plug wire disconnect on a 4.7 v8 and it was not all
that noticable until some load was put on it (the light and code retrival told
me more than anything else). I also had a 4.2 i6 with no effective compression
on one cylinder and I did not notice anything unless some load was put on it.
FWIW, the new Hemis idle on only on 4 cylinders.
Shrug,
/herb
#73
Guest
Posts: n/a
Re: Code P0301
In article <ue72129j3675sfmetngfl68thg7epecccd@4ax.com>,
bllsht <nospam@dot.net> wrote:
#Man, I gotta get me one of those magic in-line 6 engines. Missing spark and you
#wouldn't even notice?
Whatever floats your boat, if you think I'm wrong, then maybe I am. Have you
tried it? Prolly not. Have I? Not on purpose.
All I know is that I had a plug wire disconnect on a 4.7 v8 and it was not all
that noticable until some load was put on it (the light and code retrival told
me more than anything else). I also had a 4.2 i6 with no effective compression
on one cylinder and I did not notice anything unless some load was put on it.
FWIW, the new Hemis idle on only on 4 cylinders.
Shrug,
/herb
bllsht <nospam@dot.net> wrote:
#Man, I gotta get me one of those magic in-line 6 engines. Missing spark and you
#wouldn't even notice?
Whatever floats your boat, if you think I'm wrong, then maybe I am. Have you
tried it? Prolly not. Have I? Not on purpose.
All I know is that I had a plug wire disconnect on a 4.7 v8 and it was not all
that noticable until some load was put on it (the light and code retrival told
me more than anything else). I also had a 4.2 i6 with no effective compression
on one cylinder and I did not notice anything unless some load was put on it.
FWIW, the new Hemis idle on only on 4 cylinders.
Shrug,
/herb
#74
Guest
Posts: n/a
Re: Code P0301
I can't hear it when my kids tell my CD is skipping, either.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Herb Leong wrote:
>
> In article <ue72129j3675sfmetngfl68thg7epecccd@4ax.com>,
> bllsht <nospam@dot.net> wrote:
> #Man, I gotta get me one of those magic in-line 6 engines. Missing spark and you
> #wouldn't even notice?
>
> Whatever floats your boat, if you think I'm wrong, then maybe I am. Have you
> tried it? Prolly not. Have I? Not on purpose.
>
> All I know is that I had a plug wire disconnect on a 4.7 v8 and it was not all
> that noticable until some load was put on it (the light and code retrival told
> me more than anything else). I also had a 4.2 i6 with no effective compression
> on one cylinder and I did not notice anything unless some load was put on it.
>
> FWIW, the new Hemis idle on only on 4 cylinders.
>
> Shrug,
>
> /herb
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Herb Leong wrote:
>
> In article <ue72129j3675sfmetngfl68thg7epecccd@4ax.com>,
> bllsht <nospam@dot.net> wrote:
> #Man, I gotta get me one of those magic in-line 6 engines. Missing spark and you
> #wouldn't even notice?
>
> Whatever floats your boat, if you think I'm wrong, then maybe I am. Have you
> tried it? Prolly not. Have I? Not on purpose.
>
> All I know is that I had a plug wire disconnect on a 4.7 v8 and it was not all
> that noticable until some load was put on it (the light and code retrival told
> me more than anything else). I also had a 4.2 i6 with no effective compression
> on one cylinder and I did not notice anything unless some load was put on it.
>
> FWIW, the new Hemis idle on only on 4 cylinders.
>
> Shrug,
>
> /herb
#75
Guest
Posts: n/a
Re: Code P0301
I can't hear it when my kids tell my CD is skipping, either.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Herb Leong wrote:
>
> In article <ue72129j3675sfmetngfl68thg7epecccd@4ax.com>,
> bllsht <nospam@dot.net> wrote:
> #Man, I gotta get me one of those magic in-line 6 engines. Missing spark and you
> #wouldn't even notice?
>
> Whatever floats your boat, if you think I'm wrong, then maybe I am. Have you
> tried it? Prolly not. Have I? Not on purpose.
>
> All I know is that I had a plug wire disconnect on a 4.7 v8 and it was not all
> that noticable until some load was put on it (the light and code retrival told
> me more than anything else). I also had a 4.2 i6 with no effective compression
> on one cylinder and I did not notice anything unless some load was put on it.
>
> FWIW, the new Hemis idle on only on 4 cylinders.
>
> Shrug,
>
> /herb
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Herb Leong wrote:
>
> In article <ue72129j3675sfmetngfl68thg7epecccd@4ax.com>,
> bllsht <nospam@dot.net> wrote:
> #Man, I gotta get me one of those magic in-line 6 engines. Missing spark and you
> #wouldn't even notice?
>
> Whatever floats your boat, if you think I'm wrong, then maybe I am. Have you
> tried it? Prolly not. Have I? Not on purpose.
>
> All I know is that I had a plug wire disconnect on a 4.7 v8 and it was not all
> that noticable until some load was put on it (the light and code retrival told
> me more than anything else). I also had a 4.2 i6 with no effective compression
> on one cylinder and I did not notice anything unless some load was put on it.
>
> FWIW, the new Hemis idle on only on 4 cylinders.
>
> Shrug,
>
> /herb
#76
Guest
Posts: n/a
Re: Code P0301
I can't hear it when my kids tell my CD is skipping, either.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Herb Leong wrote:
>
> In article <ue72129j3675sfmetngfl68thg7epecccd@4ax.com>,
> bllsht <nospam@dot.net> wrote:
> #Man, I gotta get me one of those magic in-line 6 engines. Missing spark and you
> #wouldn't even notice?
>
> Whatever floats your boat, if you think I'm wrong, then maybe I am. Have you
> tried it? Prolly not. Have I? Not on purpose.
>
> All I know is that I had a plug wire disconnect on a 4.7 v8 and it was not all
> that noticable until some load was put on it (the light and code retrival told
> me more than anything else). I also had a 4.2 i6 with no effective compression
> on one cylinder and I did not notice anything unless some load was put on it.
>
> FWIW, the new Hemis idle on only on 4 cylinders.
>
> Shrug,
>
> /herb
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Herb Leong wrote:
>
> In article <ue72129j3675sfmetngfl68thg7epecccd@4ax.com>,
> bllsht <nospam@dot.net> wrote:
> #Man, I gotta get me one of those magic in-line 6 engines. Missing spark and you
> #wouldn't even notice?
>
> Whatever floats your boat, if you think I'm wrong, then maybe I am. Have you
> tried it? Prolly not. Have I? Not on purpose.
>
> All I know is that I had a plug wire disconnect on a 4.7 v8 and it was not all
> that noticable until some load was put on it (the light and code retrival told
> me more than anything else). I also had a 4.2 i6 with no effective compression
> on one cylinder and I did not notice anything unless some load was put on it.
>
> FWIW, the new Hemis idle on only on 4 cylinders.
>
> Shrug,
>
> /herb
#77
Guest
Posts: n/a
Re: Code P0301
I can't hear it when my kids tell my CD is skipping, either.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Herb Leong wrote:
>
> In article <ue72129j3675sfmetngfl68thg7epecccd@4ax.com>,
> bllsht <nospam@dot.net> wrote:
> #Man, I gotta get me one of those magic in-line 6 engines. Missing spark and you
> #wouldn't even notice?
>
> Whatever floats your boat, if you think I'm wrong, then maybe I am. Have you
> tried it? Prolly not. Have I? Not on purpose.
>
> All I know is that I had a plug wire disconnect on a 4.7 v8 and it was not all
> that noticable until some load was put on it (the light and code retrival told
> me more than anything else). I also had a 4.2 i6 with no effective compression
> on one cylinder and I did not notice anything unless some load was put on it.
>
> FWIW, the new Hemis idle on only on 4 cylinders.
>
> Shrug,
>
> /herb
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Herb Leong wrote:
>
> In article <ue72129j3675sfmetngfl68thg7epecccd@4ax.com>,
> bllsht <nospam@dot.net> wrote:
> #Man, I gotta get me one of those magic in-line 6 engines. Missing spark and you
> #wouldn't even notice?
>
> Whatever floats your boat, if you think I'm wrong, then maybe I am. Have you
> tried it? Prolly not. Have I? Not on purpose.
>
> All I know is that I had a plug wire disconnect on a 4.7 v8 and it was not all
> that noticable until some load was put on it (the light and code retrival told
> me more than anything else). I also had a 4.2 i6 with no effective compression
> on one cylinder and I did not notice anything unless some load was put on it.
>
> FWIW, the new Hemis idle on only on 4 cylinders.
>
> Shrug,
>
> /herb
#78
Guest
Posts: n/a
Re: Code P0301
spark plug fouling out at start up
cam sensor going bad, crank sensor going bad
Firebird wrote:
> I had everything changed about 6 months ago at 60,000 miles.
>
> "billy ray" <billy_ray@fuseSPAM.net> wrote in message
> news:efeb1$440f2847$4831b233$23379@FUSE.NET...
> > You can reset the computer by simply disconnecting the battery for a few
> > seconds or my use of a reader. The readers are available for use at many
> > auto-parts stores... some free of charge or with a small deposit.
> > http://www.obd-codes.com/trouble_cod...e-detected.php
> > P0301 Code - Cylinder #1 Misfire
> > Technical Description
> > Cylinder #1 Misfire Detected
> >
> > What does that mean?
> > A P0301 code means that the the car's computer has detected that one of
> > the engine's cylinders is not firing properly. In this case it's cylinder
> > #1.
> >
> > Symptoms
> > Symptoms may include:
> > a.. the engine may be harder to start
> > b.. the engine may stumble / stumble, and/or hesitate
> > c.. other symptoms may also be present
> > Causes
> > A code P0301 may mean that one or more of the following has happened:
> >
> > a.. Faulty spark plug or wire
> > b.. Faulty coil (pack)
> > c.. Faulty oxygen sensor(s)
> > d.. Faulty fuel injector
> > e.. Burned exhaust valve
> > f.. Faulty catalytic converter(s)
> > g.. Running out of fuel
> > h.. Poor compression
> > i.. Defective computer
> > Possible Solutions
> > If there are no symptoms, the simplest thing to do is to reset the code
> > and see if it comes back.
> >
> > If there are symptoms such as the engine is stumbling or hesitating, check
> > all wiring and connectors that lead to the cylinders (i.e. spark plugs).
> > Depending on how long the ignition components have been in the car, it may
> > be a good idea to replace them as part of your regular maintenance
> > schedule. I would suggest spark plugs, spark plug wires, distributor cap,
> > and rotor (if applicable). Otherwise, check the coils (a.k.a. coil packs).
> > In some cases, the catalytic converter has gone bad. If you smell rotten
> > eggs in the exhaust, your cat converter needs to be replaced. I've also
> > heard in other cases the problems were faulty fuel injectors.
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:440EF747.AF66622@sympatico.ca...
> >> It isn't going to reset as long as something is wrong.
> >>
> >> I would be checking out cylinder 1 myself.....
> >>
> >> You don't say what you are driving, but you likely have a spark plug at
> >> least in there and maybe a plug wire with a distributor cap and
> >> rotor....
> >>
> >> Mike
> >> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >> 88 Cherokee 235 BFG AT's
> >> Canadian Off Road Trips Photos: Non members can still view!
> >> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> >> (More Off Road album links at bottom of the view page)
> >>
> >> Firebird wrote:
> >>>
> >>> I got the light on the dashboard while waiting in line to exit a large
> >>> parking lot. THe engine had been idling for about 5-7 minutes. Code
> >>> P0301
> >>> is a miss in cylinder 1, however I never felt anything and the engine
> >>> runs
> >>> ok to me.
> >>> The light has been on the dashboard for about 3 weeks now.
> >>> How should I proceed. I thought it resets itself after 40 starts.
> >
> >
cam sensor going bad, crank sensor going bad
Firebird wrote:
> I had everything changed about 6 months ago at 60,000 miles.
>
> "billy ray" <billy_ray@fuseSPAM.net> wrote in message
> news:efeb1$440f2847$4831b233$23379@FUSE.NET...
> > You can reset the computer by simply disconnecting the battery for a few
> > seconds or my use of a reader. The readers are available for use at many
> > auto-parts stores... some free of charge or with a small deposit.
> > http://www.obd-codes.com/trouble_cod...e-detected.php
> > P0301 Code - Cylinder #1 Misfire
> > Technical Description
> > Cylinder #1 Misfire Detected
> >
> > What does that mean?
> > A P0301 code means that the the car's computer has detected that one of
> > the engine's cylinders is not firing properly. In this case it's cylinder
> > #1.
> >
> > Symptoms
> > Symptoms may include:
> > a.. the engine may be harder to start
> > b.. the engine may stumble / stumble, and/or hesitate
> > c.. other symptoms may also be present
> > Causes
> > A code P0301 may mean that one or more of the following has happened:
> >
> > a.. Faulty spark plug or wire
> > b.. Faulty coil (pack)
> > c.. Faulty oxygen sensor(s)
> > d.. Faulty fuel injector
> > e.. Burned exhaust valve
> > f.. Faulty catalytic converter(s)
> > g.. Running out of fuel
> > h.. Poor compression
> > i.. Defective computer
> > Possible Solutions
> > If there are no symptoms, the simplest thing to do is to reset the code
> > and see if it comes back.
> >
> > If there are symptoms such as the engine is stumbling or hesitating, check
> > all wiring and connectors that lead to the cylinders (i.e. spark plugs).
> > Depending on how long the ignition components have been in the car, it may
> > be a good idea to replace them as part of your regular maintenance
> > schedule. I would suggest spark plugs, spark plug wires, distributor cap,
> > and rotor (if applicable). Otherwise, check the coils (a.k.a. coil packs).
> > In some cases, the catalytic converter has gone bad. If you smell rotten
> > eggs in the exhaust, your cat converter needs to be replaced. I've also
> > heard in other cases the problems were faulty fuel injectors.
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:440EF747.AF66622@sympatico.ca...
> >> It isn't going to reset as long as something is wrong.
> >>
> >> I would be checking out cylinder 1 myself.....
> >>
> >> You don't say what you are driving, but you likely have a spark plug at
> >> least in there and maybe a plug wire with a distributor cap and
> >> rotor....
> >>
> >> Mike
> >> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >> 88 Cherokee 235 BFG AT's
> >> Canadian Off Road Trips Photos: Non members can still view!
> >> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> >> (More Off Road album links at bottom of the view page)
> >>
> >> Firebird wrote:
> >>>
> >>> I got the light on the dashboard while waiting in line to exit a large
> >>> parking lot. THe engine had been idling for about 5-7 minutes. Code
> >>> P0301
> >>> is a miss in cylinder 1, however I never felt anything and the engine
> >>> runs
> >>> ok to me.
> >>> The light has been on the dashboard for about 3 weeks now.
> >>> How should I proceed. I thought it resets itself after 40 starts.
> >
> >
#79
Guest
Posts: n/a
Re: Code P0301
spark plug fouling out at start up
cam sensor going bad, crank sensor going bad
Firebird wrote:
> I had everything changed about 6 months ago at 60,000 miles.
>
> "billy ray" <billy_ray@fuseSPAM.net> wrote in message
> news:efeb1$440f2847$4831b233$23379@FUSE.NET...
> > You can reset the computer by simply disconnecting the battery for a few
> > seconds or my use of a reader. The readers are available for use at many
> > auto-parts stores... some free of charge or with a small deposit.
> > http://www.obd-codes.com/trouble_cod...e-detected.php
> > P0301 Code - Cylinder #1 Misfire
> > Technical Description
> > Cylinder #1 Misfire Detected
> >
> > What does that mean?
> > A P0301 code means that the the car's computer has detected that one of
> > the engine's cylinders is not firing properly. In this case it's cylinder
> > #1.
> >
> > Symptoms
> > Symptoms may include:
> > a.. the engine may be harder to start
> > b.. the engine may stumble / stumble, and/or hesitate
> > c.. other symptoms may also be present
> > Causes
> > A code P0301 may mean that one or more of the following has happened:
> >
> > a.. Faulty spark plug or wire
> > b.. Faulty coil (pack)
> > c.. Faulty oxygen sensor(s)
> > d.. Faulty fuel injector
> > e.. Burned exhaust valve
> > f.. Faulty catalytic converter(s)
> > g.. Running out of fuel
> > h.. Poor compression
> > i.. Defective computer
> > Possible Solutions
> > If there are no symptoms, the simplest thing to do is to reset the code
> > and see if it comes back.
> >
> > If there are symptoms such as the engine is stumbling or hesitating, check
> > all wiring and connectors that lead to the cylinders (i.e. spark plugs).
> > Depending on how long the ignition components have been in the car, it may
> > be a good idea to replace them as part of your regular maintenance
> > schedule. I would suggest spark plugs, spark plug wires, distributor cap,
> > and rotor (if applicable). Otherwise, check the coils (a.k.a. coil packs).
> > In some cases, the catalytic converter has gone bad. If you smell rotten
> > eggs in the exhaust, your cat converter needs to be replaced. I've also
> > heard in other cases the problems were faulty fuel injectors.
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:440EF747.AF66622@sympatico.ca...
> >> It isn't going to reset as long as something is wrong.
> >>
> >> I would be checking out cylinder 1 myself.....
> >>
> >> You don't say what you are driving, but you likely have a spark plug at
> >> least in there and maybe a plug wire with a distributor cap and
> >> rotor....
> >>
> >> Mike
> >> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >> 88 Cherokee 235 BFG AT's
> >> Canadian Off Road Trips Photos: Non members can still view!
> >> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> >> (More Off Road album links at bottom of the view page)
> >>
> >> Firebird wrote:
> >>>
> >>> I got the light on the dashboard while waiting in line to exit a large
> >>> parking lot. THe engine had been idling for about 5-7 minutes. Code
> >>> P0301
> >>> is a miss in cylinder 1, however I never felt anything and the engine
> >>> runs
> >>> ok to me.
> >>> The light has been on the dashboard for about 3 weeks now.
> >>> How should I proceed. I thought it resets itself after 40 starts.
> >
> >
cam sensor going bad, crank sensor going bad
Firebird wrote:
> I had everything changed about 6 months ago at 60,000 miles.
>
> "billy ray" <billy_ray@fuseSPAM.net> wrote in message
> news:efeb1$440f2847$4831b233$23379@FUSE.NET...
> > You can reset the computer by simply disconnecting the battery for a few
> > seconds or my use of a reader. The readers are available for use at many
> > auto-parts stores... some free of charge or with a small deposit.
> > http://www.obd-codes.com/trouble_cod...e-detected.php
> > P0301 Code - Cylinder #1 Misfire
> > Technical Description
> > Cylinder #1 Misfire Detected
> >
> > What does that mean?
> > A P0301 code means that the the car's computer has detected that one of
> > the engine's cylinders is not firing properly. In this case it's cylinder
> > #1.
> >
> > Symptoms
> > Symptoms may include:
> > a.. the engine may be harder to start
> > b.. the engine may stumble / stumble, and/or hesitate
> > c.. other symptoms may also be present
> > Causes
> > A code P0301 may mean that one or more of the following has happened:
> >
> > a.. Faulty spark plug or wire
> > b.. Faulty coil (pack)
> > c.. Faulty oxygen sensor(s)
> > d.. Faulty fuel injector
> > e.. Burned exhaust valve
> > f.. Faulty catalytic converter(s)
> > g.. Running out of fuel
> > h.. Poor compression
> > i.. Defective computer
> > Possible Solutions
> > If there are no symptoms, the simplest thing to do is to reset the code
> > and see if it comes back.
> >
> > If there are symptoms such as the engine is stumbling or hesitating, check
> > all wiring and connectors that lead to the cylinders (i.e. spark plugs).
> > Depending on how long the ignition components have been in the car, it may
> > be a good idea to replace them as part of your regular maintenance
> > schedule. I would suggest spark plugs, spark plug wires, distributor cap,
> > and rotor (if applicable). Otherwise, check the coils (a.k.a. coil packs).
> > In some cases, the catalytic converter has gone bad. If you smell rotten
> > eggs in the exhaust, your cat converter needs to be replaced. I've also
> > heard in other cases the problems were faulty fuel injectors.
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:440EF747.AF66622@sympatico.ca...
> >> It isn't going to reset as long as something is wrong.
> >>
> >> I would be checking out cylinder 1 myself.....
> >>
> >> You don't say what you are driving, but you likely have a spark plug at
> >> least in there and maybe a plug wire with a distributor cap and
> >> rotor....
> >>
> >> Mike
> >> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >> 88 Cherokee 235 BFG AT's
> >> Canadian Off Road Trips Photos: Non members can still view!
> >> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> >> (More Off Road album links at bottom of the view page)
> >>
> >> Firebird wrote:
> >>>
> >>> I got the light on the dashboard while waiting in line to exit a large
> >>> parking lot. THe engine had been idling for about 5-7 minutes. Code
> >>> P0301
> >>> is a miss in cylinder 1, however I never felt anything and the engine
> >>> runs
> >>> ok to me.
> >>> The light has been on the dashboard for about 3 weeks now.
> >>> How should I proceed. I thought it resets itself after 40 starts.
> >
> >
#80
Guest
Posts: n/a
Re: Code P0301
spark plug fouling out at start up
cam sensor going bad, crank sensor going bad
Firebird wrote:
> I had everything changed about 6 months ago at 60,000 miles.
>
> "billy ray" <billy_ray@fuseSPAM.net> wrote in message
> news:efeb1$440f2847$4831b233$23379@FUSE.NET...
> > You can reset the computer by simply disconnecting the battery for a few
> > seconds or my use of a reader. The readers are available for use at many
> > auto-parts stores... some free of charge or with a small deposit.
> > http://www.obd-codes.com/trouble_cod...e-detected.php
> > P0301 Code - Cylinder #1 Misfire
> > Technical Description
> > Cylinder #1 Misfire Detected
> >
> > What does that mean?
> > A P0301 code means that the the car's computer has detected that one of
> > the engine's cylinders is not firing properly. In this case it's cylinder
> > #1.
> >
> > Symptoms
> > Symptoms may include:
> > a.. the engine may be harder to start
> > b.. the engine may stumble / stumble, and/or hesitate
> > c.. other symptoms may also be present
> > Causes
> > A code P0301 may mean that one or more of the following has happened:
> >
> > a.. Faulty spark plug or wire
> > b.. Faulty coil (pack)
> > c.. Faulty oxygen sensor(s)
> > d.. Faulty fuel injector
> > e.. Burned exhaust valve
> > f.. Faulty catalytic converter(s)
> > g.. Running out of fuel
> > h.. Poor compression
> > i.. Defective computer
> > Possible Solutions
> > If there are no symptoms, the simplest thing to do is to reset the code
> > and see if it comes back.
> >
> > If there are symptoms such as the engine is stumbling or hesitating, check
> > all wiring and connectors that lead to the cylinders (i.e. spark plugs).
> > Depending on how long the ignition components have been in the car, it may
> > be a good idea to replace them as part of your regular maintenance
> > schedule. I would suggest spark plugs, spark plug wires, distributor cap,
> > and rotor (if applicable). Otherwise, check the coils (a.k.a. coil packs).
> > In some cases, the catalytic converter has gone bad. If you smell rotten
> > eggs in the exhaust, your cat converter needs to be replaced. I've also
> > heard in other cases the problems were faulty fuel injectors.
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:440EF747.AF66622@sympatico.ca...
> >> It isn't going to reset as long as something is wrong.
> >>
> >> I would be checking out cylinder 1 myself.....
> >>
> >> You don't say what you are driving, but you likely have a spark plug at
> >> least in there and maybe a plug wire with a distributor cap and
> >> rotor....
> >>
> >> Mike
> >> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >> 88 Cherokee 235 BFG AT's
> >> Canadian Off Road Trips Photos: Non members can still view!
> >> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> >> (More Off Road album links at bottom of the view page)
> >>
> >> Firebird wrote:
> >>>
> >>> I got the light on the dashboard while waiting in line to exit a large
> >>> parking lot. THe engine had been idling for about 5-7 minutes. Code
> >>> P0301
> >>> is a miss in cylinder 1, however I never felt anything and the engine
> >>> runs
> >>> ok to me.
> >>> The light has been on the dashboard for about 3 weeks now.
> >>> How should I proceed. I thought it resets itself after 40 starts.
> >
> >
cam sensor going bad, crank sensor going bad
Firebird wrote:
> I had everything changed about 6 months ago at 60,000 miles.
>
> "billy ray" <billy_ray@fuseSPAM.net> wrote in message
> news:efeb1$440f2847$4831b233$23379@FUSE.NET...
> > You can reset the computer by simply disconnecting the battery for a few
> > seconds or my use of a reader. The readers are available for use at many
> > auto-parts stores... some free of charge or with a small deposit.
> > http://www.obd-codes.com/trouble_cod...e-detected.php
> > P0301 Code - Cylinder #1 Misfire
> > Technical Description
> > Cylinder #1 Misfire Detected
> >
> > What does that mean?
> > A P0301 code means that the the car's computer has detected that one of
> > the engine's cylinders is not firing properly. In this case it's cylinder
> > #1.
> >
> > Symptoms
> > Symptoms may include:
> > a.. the engine may be harder to start
> > b.. the engine may stumble / stumble, and/or hesitate
> > c.. other symptoms may also be present
> > Causes
> > A code P0301 may mean that one or more of the following has happened:
> >
> > a.. Faulty spark plug or wire
> > b.. Faulty coil (pack)
> > c.. Faulty oxygen sensor(s)
> > d.. Faulty fuel injector
> > e.. Burned exhaust valve
> > f.. Faulty catalytic converter(s)
> > g.. Running out of fuel
> > h.. Poor compression
> > i.. Defective computer
> > Possible Solutions
> > If there are no symptoms, the simplest thing to do is to reset the code
> > and see if it comes back.
> >
> > If there are symptoms such as the engine is stumbling or hesitating, check
> > all wiring and connectors that lead to the cylinders (i.e. spark plugs).
> > Depending on how long the ignition components have been in the car, it may
> > be a good idea to replace them as part of your regular maintenance
> > schedule. I would suggest spark plugs, spark plug wires, distributor cap,
> > and rotor (if applicable). Otherwise, check the coils (a.k.a. coil packs).
> > In some cases, the catalytic converter has gone bad. If you smell rotten
> > eggs in the exhaust, your cat converter needs to be replaced. I've also
> > heard in other cases the problems were faulty fuel injectors.
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:440EF747.AF66622@sympatico.ca...
> >> It isn't going to reset as long as something is wrong.
> >>
> >> I would be checking out cylinder 1 myself.....
> >>
> >> You don't say what you are driving, but you likely have a spark plug at
> >> least in there and maybe a plug wire with a distributor cap and
> >> rotor....
> >>
> >> Mike
> >> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >> 88 Cherokee 235 BFG AT's
> >> Canadian Off Road Trips Photos: Non members can still view!
> >> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> >> (More Off Road album links at bottom of the view page)
> >>
> >> Firebird wrote:
> >>>
> >>> I got the light on the dashboard while waiting in line to exit a large
> >>> parking lot. THe engine had been idling for about 5-7 minutes. Code
> >>> P0301
> >>> is a miss in cylinder 1, however I never felt anything and the engine
> >>> runs
> >>> ok to me.
> >>> The light has been on the dashboard for about 3 weeks now.
> >>> How should I proceed. I thought it resets itself after 40 starts.
> >
> >