Clutch question
02-05-2005, 07:08 PM
#21
Guest
Posts: n/a
Re: Clutch question
Carl Saiyed wrote:
> Clap-
>
> Click the link. In the internet explorer menu, go to Edit, Find on this
> page. Type in "Clutch".
>
> It's down below.
No offence, but you guys must not be reading the same page I am.
There's a whole bunch of clutch related stuff there, but no *clutch* and
no pressure plate. There are bearing assemblies, master cylinders,
slave cylinders, forks, fork boots, and linkage parts. But not a single
*clutch* anywhere on that page.
> Clap-
>
> Click the link. In the internet explorer menu, go to Edit, Find on this
> page. Type in "Clutch".
>
> It's down below.
No offence, but you guys must not be reading the same page I am.
There's a whole bunch of clutch related stuff there, but no *clutch* and
no pressure plate. There are bearing assemblies, master cylinders,
slave cylinders, forks, fork boots, and linkage parts. But not a single
*clutch* anywhere on that page.
02-05-2005, 07:08 PM
#22
Guest
Posts: n/a
Re: Clutch question
Carl Saiyed wrote:
> Clap-
>
> Click the link. In the internet explorer menu, go to Edit, Find on this
> page. Type in "Clutch".
>
> It's down below.
No offence, but you guys must not be reading the same page I am.
There's a whole bunch of clutch related stuff there, but no *clutch* and
no pressure plate. There are bearing assemblies, master cylinders,
slave cylinders, forks, fork boots, and linkage parts. But not a single
*clutch* anywhere on that page.
> Clap-
>
> Click the link. In the internet explorer menu, go to Edit, Find on this
> page. Type in "Clutch".
>
> It's down below.
No offence, but you guys must not be reading the same page I am.
There's a whole bunch of clutch related stuff there, but no *clutch* and
no pressure plate. There are bearing assemblies, master cylinders,
slave cylinders, forks, fork boots, and linkage parts. But not a single
*clutch* anywhere on that page.
02-05-2005, 08:13 PM
#23
Guest
Posts: n/a
Re: Clutch question
I think he is referring to the 6th and 7th items down the page under
"bearing assembly" - it says 10.50"
I just got a clutch for my 85 CJ7 with the 258 and t5 and it wa part #
MU1897 at Advance Auto Parts. It was $128.00 and I'm pretty sure it was a
10.5 inch disc.
--
___________________
HomeBrewer
http://85cj7.blogspot.com/
http://85cj7.webhop.net/
http://funfacts.webhop.org/
"When you decide something is impossible to do, try to stay out of the way
of the man that's doing it."
"bearing assembly" - it says 10.50"
I just got a clutch for my 85 CJ7 with the 258 and t5 and it wa part #
MU1897 at Advance Auto Parts. It was $128.00 and I'm pretty sure it was a
10.5 inch disc.
--
___________________
HomeBrewer
http://85cj7.blogspot.com/
http://85cj7.webhop.net/
http://funfacts.webhop.org/
"When you decide something is impossible to do, try to stay out of the way
of the man that's doing it."
02-05-2005, 08:13 PM
#24
Guest
Posts: n/a
Re: Clutch question
I think he is referring to the 6th and 7th items down the page under
"bearing assembly" - it says 10.50"
I just got a clutch for my 85 CJ7 with the 258 and t5 and it wa part #
MU1897 at Advance Auto Parts. It was $128.00 and I'm pretty sure it was a
10.5 inch disc.
--
___________________
HomeBrewer
http://85cj7.blogspot.com/
http://85cj7.webhop.net/
http://funfacts.webhop.org/
"When you decide something is impossible to do, try to stay out of the way
of the man that's doing it."
"bearing assembly" - it says 10.50"
I just got a clutch for my 85 CJ7 with the 258 and t5 and it wa part #
MU1897 at Advance Auto Parts. It was $128.00 and I'm pretty sure it was a
10.5 inch disc.
--
___________________
HomeBrewer
http://85cj7.blogspot.com/
http://85cj7.webhop.net/
http://funfacts.webhop.org/
"When you decide something is impossible to do, try to stay out of the way
of the man that's doing it."
02-05-2005, 08:13 PM
#25
Guest
Posts: n/a
Re: Clutch question
I think he is referring to the 6th and 7th items down the page under
"bearing assembly" - it says 10.50"
I just got a clutch for my 85 CJ7 with the 258 and t5 and it wa part #
MU1897 at Advance Auto Parts. It was $128.00 and I'm pretty sure it was a
10.5 inch disc.
--
___________________
HomeBrewer
http://85cj7.blogspot.com/
http://85cj7.webhop.net/
http://funfacts.webhop.org/
"When you decide something is impossible to do, try to stay out of the way
of the man that's doing it."
"bearing assembly" - it says 10.50"
I just got a clutch for my 85 CJ7 with the 258 and t5 and it wa part #
MU1897 at Advance Auto Parts. It was $128.00 and I'm pretty sure it was a
10.5 inch disc.
--
___________________
HomeBrewer
http://85cj7.blogspot.com/
http://85cj7.webhop.net/
http://funfacts.webhop.org/
"When you decide something is impossible to do, try to stay out of the way
of the man that's doing it."
02-05-2005, 08:17 PM
#26
Guest
Posts: n/a
Re: Clutch question
http://www.partsamerica.com/PartDeta...pe=242&PTSet=A
I just researched the disc that came with my set and it is the Perfection
Hytest RCF484 Clutch disc and it's specs:
Remanufactured Clutch Disc; Cover Type: Borg & Beck; 10.4" Clutch, 10
Spline, 1 1/8" Hub
--
___________________
HomeBrewer
http://85cj7.blogspot.com/
http://85cj7.webhop.net/
http://funfacts.webhop.org/
"When you decide something is impossible to do, try to stay out of the way
of the man that's doing it."
"HomeBrewer" <85cj7XXX@***.net> wrote in message
news:36l9agF51tk9lU1@individual.net...
>I think he is referring to the 6th and 7th items down the page under
>"bearing assembly" - it says 10.50"
>
> I just got a clutch for my 85 CJ7 with the 258 and t5 and it wa part #
> MU1897 at Advance Auto Parts. It was $128.00 and I'm pretty sure it was a
> 10.5 inch disc.
>
> --
> ___________________
> HomeBrewer
> http://85cj7.blogspot.com/
> http://85cj7.webhop.net/
> http://funfacts.webhop.org/
> "When you decide something is impossible to do, try to stay out of the way
> of the man that's doing it."
>
I just researched the disc that came with my set and it is the Perfection
Hytest RCF484 Clutch disc and it's specs:
Remanufactured Clutch Disc; Cover Type: Borg & Beck; 10.4" Clutch, 10
Spline, 1 1/8" Hub
--
___________________
HomeBrewer
http://85cj7.blogspot.com/
http://85cj7.webhop.net/
http://funfacts.webhop.org/
"When you decide something is impossible to do, try to stay out of the way
of the man that's doing it."
"HomeBrewer" <85cj7XXX@***.net> wrote in message
news:36l9agF51tk9lU1@individual.net...
>I think he is referring to the 6th and 7th items down the page under
>"bearing assembly" - it says 10.50"
>
> I just got a clutch for my 85 CJ7 with the 258 and t5 and it wa part #
> MU1897 at Advance Auto Parts. It was $128.00 and I'm pretty sure it was a
> 10.5 inch disc.
>
> --
> ___________________
> HomeBrewer
> http://85cj7.blogspot.com/
> http://85cj7.webhop.net/
> http://funfacts.webhop.org/
> "When you decide something is impossible to do, try to stay out of the way
> of the man that's doing it."
>
02-05-2005, 08:17 PM
#27
Guest
Posts: n/a
Re: Clutch question
http://www.partsamerica.com/PartDeta...pe=242&PTSet=A
I just researched the disc that came with my set and it is the Perfection
Hytest RCF484 Clutch disc and it's specs:
Remanufactured Clutch Disc; Cover Type: Borg & Beck; 10.4" Clutch, 10
Spline, 1 1/8" Hub
--
___________________
HomeBrewer
http://85cj7.blogspot.com/
http://85cj7.webhop.net/
http://funfacts.webhop.org/
"When you decide something is impossible to do, try to stay out of the way
of the man that's doing it."
"HomeBrewer" <85cj7XXX@***.net> wrote in message
news:36l9agF51tk9lU1@individual.net...
>I think he is referring to the 6th and 7th items down the page under
>"bearing assembly" - it says 10.50"
>
> I just got a clutch for my 85 CJ7 with the 258 and t5 and it wa part #
> MU1897 at Advance Auto Parts. It was $128.00 and I'm pretty sure it was a
> 10.5 inch disc.
>
> --
> ___________________
> HomeBrewer
> http://85cj7.blogspot.com/
> http://85cj7.webhop.net/
> http://funfacts.webhop.org/
> "When you decide something is impossible to do, try to stay out of the way
> of the man that's doing it."
>
I just researched the disc that came with my set and it is the Perfection
Hytest RCF484 Clutch disc and it's specs:
Remanufactured Clutch Disc; Cover Type: Borg & Beck; 10.4" Clutch, 10
Spline, 1 1/8" Hub
--
___________________
HomeBrewer
http://85cj7.blogspot.com/
http://85cj7.webhop.net/
http://funfacts.webhop.org/
"When you decide something is impossible to do, try to stay out of the way
of the man that's doing it."
"HomeBrewer" <85cj7XXX@***.net> wrote in message
news:36l9agF51tk9lU1@individual.net...
>I think he is referring to the 6th and 7th items down the page under
>"bearing assembly" - it says 10.50"
>
> I just got a clutch for my 85 CJ7 with the 258 and t5 and it wa part #
> MU1897 at Advance Auto Parts. It was $128.00 and I'm pretty sure it was a
> 10.5 inch disc.
>
> --
> ___________________
> HomeBrewer
> http://85cj7.blogspot.com/
> http://85cj7.webhop.net/
> http://funfacts.webhop.org/
> "When you decide something is impossible to do, try to stay out of the way
> of the man that's doing it."
>
02-05-2005, 08:17 PM
#28
Guest
Posts: n/a
Re: Clutch question
http://www.partsamerica.com/PartDeta...pe=242&PTSet=A
I just researched the disc that came with my set and it is the Perfection
Hytest RCF484 Clutch disc and it's specs:
Remanufactured Clutch Disc; Cover Type: Borg & Beck; 10.4" Clutch, 10
Spline, 1 1/8" Hub
--
___________________
HomeBrewer
http://85cj7.blogspot.com/
http://85cj7.webhop.net/
http://funfacts.webhop.org/
"When you decide something is impossible to do, try to stay out of the way
of the man that's doing it."
"HomeBrewer" <85cj7XXX@***.net> wrote in message
news:36l9agF51tk9lU1@individual.net...
>I think he is referring to the 6th and 7th items down the page under
>"bearing assembly" - it says 10.50"
>
> I just got a clutch for my 85 CJ7 with the 258 and t5 and it wa part #
> MU1897 at Advance Auto Parts. It was $128.00 and I'm pretty sure it was a
> 10.5 inch disc.
>
> --
> ___________________
> HomeBrewer
> http://85cj7.blogspot.com/
> http://85cj7.webhop.net/
> http://funfacts.webhop.org/
> "When you decide something is impossible to do, try to stay out of the way
> of the man that's doing it."
>
I just researched the disc that came with my set and it is the Perfection
Hytest RCF484 Clutch disc and it's specs:
Remanufactured Clutch Disc; Cover Type: Borg & Beck; 10.4" Clutch, 10
Spline, 1 1/8" Hub
--
___________________
HomeBrewer
http://85cj7.blogspot.com/
http://85cj7.webhop.net/
http://funfacts.webhop.org/
"When you decide something is impossible to do, try to stay out of the way
of the man that's doing it."
"HomeBrewer" <85cj7XXX@***.net> wrote in message
news:36l9agF51tk9lU1@individual.net...
>I think he is referring to the 6th and 7th items down the page under
>"bearing assembly" - it says 10.50"
>
> I just got a clutch for my 85 CJ7 with the 258 and t5 and it wa part #
> MU1897 at Advance Auto Parts. It was $128.00 and I'm pretty sure it was a
> 10.5 inch disc.
>
> --
> ___________________
> HomeBrewer
> http://85cj7.blogspot.com/
> http://85cj7.webhop.net/
> http://funfacts.webhop.org/
> "When you decide something is impossible to do, try to stay out of the way
> of the man that's doing it."
>
02-05-2005, 10:21 PM
#29
Guest
Posts: n/a
Re: Clutch question
Here's another site that agrees with HomeBrewer's 10.4":
http://www.coximport.com/daikin/jeep.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Clap Trap wrote:
>
> No offence, but you guys must not be reading the same page I am.
> There's a whole bunch of clutch related stuff there, but no *clutch* and
> no pressure plate. There are bearing assemblies, master cylinders,
> slave cylinders, forks, fork boots, and linkage parts. But not a single
> *clutch* anywhere on that page.
http://www.coximport.com/daikin/jeep.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Clap Trap wrote:
>
> No offence, but you guys must not be reading the same page I am.
> There's a whole bunch of clutch related stuff there, but no *clutch* and
> no pressure plate. There are bearing assemblies, master cylinders,
> slave cylinders, forks, fork boots, and linkage parts. But not a single
> *clutch* anywhere on that page.
02-05-2005, 10:21 PM
#30
Guest
Posts: n/a
Re: Clutch question
Here's another site that agrees with HomeBrewer's 10.4":
http://www.coximport.com/daikin/jeep.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Clap Trap wrote:
>
> No offence, but you guys must not be reading the same page I am.
> There's a whole bunch of clutch related stuff there, but no *clutch* and
> no pressure plate. There are bearing assemblies, master cylinders,
> slave cylinders, forks, fork boots, and linkage parts. But not a single
> *clutch* anywhere on that page.
http://www.coximport.com/daikin/jeep.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Clap Trap wrote:
>
> No offence, but you guys must not be reading the same page I am.
> There's a whole bunch of clutch related stuff there, but no *clutch* and
> no pressure plate. There are bearing assemblies, master cylinders,
> slave cylinders, forks, fork boots, and linkage parts. But not a single
> *clutch* anywhere on that page.