Clutch?
#2
Guest
Posts: n/a
Re: Clutch?
Hi Jennifer,
I think you'll be happiest with a remanufactured or new stock disk and
pressure plate. The heavy duty stuff you might not like the chattering of
the heat resistant compounds and lack of dampener springs. Nor having to use
two hands on your knee to slip it over the rocks.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"jbjeep" <jbjeep@saw.net> wrote in message
news:u44ls2dvhr86r52iauuef85brs248imsts@4ax.com...
> I need to replace the clutch in my TJ. Any recommendations for good
> aftermarket brands? I need something strong that will hold up for another
8-9
> years! Thanks.
> -jenn
I think you'll be happiest with a remanufactured or new stock disk and
pressure plate. The heavy duty stuff you might not like the chattering of
the heat resistant compounds and lack of dampener springs. Nor having to use
two hands on your knee to slip it over the rocks.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"jbjeep" <jbjeep@saw.net> wrote in message
news:u44ls2dvhr86r52iauuef85brs248imsts@4ax.com...
> I need to replace the clutch in my TJ. Any recommendations for good
> aftermarket brands? I need something strong that will hold up for another
8-9
> years! Thanks.
> -jenn
#3
Guest
Posts: n/a
Re: Clutch?
Hi Jennifer,
I think you'll be happiest with a remanufactured or new stock disk and
pressure plate. The heavy duty stuff you might not like the chattering of
the heat resistant compounds and lack of dampener springs. Nor having to use
two hands on your knee to slip it over the rocks.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"jbjeep" <jbjeep@saw.net> wrote in message
news:u44ls2dvhr86r52iauuef85brs248imsts@4ax.com...
> I need to replace the clutch in my TJ. Any recommendations for good
> aftermarket brands? I need something strong that will hold up for another
8-9
> years! Thanks.
> -jenn
I think you'll be happiest with a remanufactured or new stock disk and
pressure plate. The heavy duty stuff you might not like the chattering of
the heat resistant compounds and lack of dampener springs. Nor having to use
two hands on your knee to slip it over the rocks.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"jbjeep" <jbjeep@saw.net> wrote in message
news:u44ls2dvhr86r52iauuef85brs248imsts@4ax.com...
> I need to replace the clutch in my TJ. Any recommendations for good
> aftermarket brands? I need something strong that will hold up for another
8-9
> years! Thanks.
> -jenn
#4
Guest
Posts: n/a
Re: Clutch?
Hi Jennifer,
I think you'll be happiest with a remanufactured or new stock disk and
pressure plate. The heavy duty stuff you might not like the chattering of
the heat resistant compounds and lack of dampener springs. Nor having to use
two hands on your knee to slip it over the rocks.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"jbjeep" <jbjeep@saw.net> wrote in message
news:u44ls2dvhr86r52iauuef85brs248imsts@4ax.com...
> I need to replace the clutch in my TJ. Any recommendations for good
> aftermarket brands? I need something strong that will hold up for another
8-9
> years! Thanks.
> -jenn
I think you'll be happiest with a remanufactured or new stock disk and
pressure plate. The heavy duty stuff you might not like the chattering of
the heat resistant compounds and lack of dampener springs. Nor having to use
two hands on your knee to slip it over the rocks.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"jbjeep" <jbjeep@saw.net> wrote in message
news:u44ls2dvhr86r52iauuef85brs248imsts@4ax.com...
> I need to replace the clutch in my TJ. Any recommendations for good
> aftermarket brands? I need something strong that will hold up for another
8-9
> years! Thanks.
> -jenn
#5
Guest
Posts: n/a
Re: Clutch?
Hi Jennifer,
I think you'll be happiest with a remanufactured or new stock disk and
pressure plate. The heavy duty stuff you might not like the chattering of
the heat resistant compounds and lack of dampener springs. Nor having to use
two hands on your knee to slip it over the rocks.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"jbjeep" <jbjeep@saw.net> wrote in message
news:u44ls2dvhr86r52iauuef85brs248imsts@4ax.com...
> I need to replace the clutch in my TJ. Any recommendations for good
> aftermarket brands? I need something strong that will hold up for another
8-9
> years! Thanks.
> -jenn
I think you'll be happiest with a remanufactured or new stock disk and
pressure plate. The heavy duty stuff you might not like the chattering of
the heat resistant compounds and lack of dampener springs. Nor having to use
two hands on your knee to slip it over the rocks.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"jbjeep" <jbjeep@saw.net> wrote in message
news:u44ls2dvhr86r52iauuef85brs248imsts@4ax.com...
> I need to replace the clutch in my TJ. Any recommendations for good
> aftermarket brands? I need something strong that will hold up for another
8-9
> years! Thanks.
> -jenn
#6
Guest
Posts: n/a
Re: Clutch?
Would I notice more noise in there? lol.
Explain about "lack of dampener springs" please.
I dont know how clutches work, just that mine has been slipping, hot, smelly, and it
doesnt engage near the top of the pedal anymore. Most of this was when snow wheeling
or on hill climbs in the last couple of months. I am actually suprised I have not
had troubles with it sooner. I need to replace it prior to doing much crawling this
spring.
-jenn
On Wed, 7 Feb 2007 20:14:23 -0800, "L.W. \(Bill\) ------ III" <----------@***.net>
wrote:
>>Hi Jennifer,
>> I think you'll be happiest with a remanufactured or new stock disk and
>>pressure plate. The heavy duty stuff you might not like the chattering of
>>the heat resistant compounds and lack of dampener springs. Nor having to use
>>two hands on your knee to slip it over the rocks.
>> God Bless America, Bill 0|||||||0
>>mailto:-------------------- http://www.----------.com/
>>"jbjeep" <jbjeep@saw.net> wrote in message
>>news:u44ls2dvhr86r52iauuef85brs248imsts@4ax.com. ..
>>> I need to replace the clutch in my TJ. Any recommendations for good
>>> aftermarket brands? I need something strong that will hold up for another
>>8-9
>>> years! Thanks.
>>> -jenn
>>
Explain about "lack of dampener springs" please.
I dont know how clutches work, just that mine has been slipping, hot, smelly, and it
doesnt engage near the top of the pedal anymore. Most of this was when snow wheeling
or on hill climbs in the last couple of months. I am actually suprised I have not
had troubles with it sooner. I need to replace it prior to doing much crawling this
spring.
-jenn
On Wed, 7 Feb 2007 20:14:23 -0800, "L.W. \(Bill\) ------ III" <----------@***.net>
wrote:
>>Hi Jennifer,
>> I think you'll be happiest with a remanufactured or new stock disk and
>>pressure plate. The heavy duty stuff you might not like the chattering of
>>the heat resistant compounds and lack of dampener springs. Nor having to use
>>two hands on your knee to slip it over the rocks.
>> God Bless America, Bill 0|||||||0
>>mailto:-------------------- http://www.----------.com/
>>"jbjeep" <jbjeep@saw.net> wrote in message
>>news:u44ls2dvhr86r52iauuef85brs248imsts@4ax.com. ..
>>> I need to replace the clutch in my TJ. Any recommendations for good
>>> aftermarket brands? I need something strong that will hold up for another
>>8-9
>>> years! Thanks.
>>> -jenn
>>
#7
Guest
Posts: n/a
Re: Clutch?
Would I notice more noise in there? lol.
Explain about "lack of dampener springs" please.
I dont know how clutches work, just that mine has been slipping, hot, smelly, and it
doesnt engage near the top of the pedal anymore. Most of this was when snow wheeling
or on hill climbs in the last couple of months. I am actually suprised I have not
had troubles with it sooner. I need to replace it prior to doing much crawling this
spring.
-jenn
On Wed, 7 Feb 2007 20:14:23 -0800, "L.W. \(Bill\) ------ III" <----------@***.net>
wrote:
>>Hi Jennifer,
>> I think you'll be happiest with a remanufactured or new stock disk and
>>pressure plate. The heavy duty stuff you might not like the chattering of
>>the heat resistant compounds and lack of dampener springs. Nor having to use
>>two hands on your knee to slip it over the rocks.
>> God Bless America, Bill 0|||||||0
>>mailto:-------------------- http://www.----------.com/
>>"jbjeep" <jbjeep@saw.net> wrote in message
>>news:u44ls2dvhr86r52iauuef85brs248imsts@4ax.com. ..
>>> I need to replace the clutch in my TJ. Any recommendations for good
>>> aftermarket brands? I need something strong that will hold up for another
>>8-9
>>> years! Thanks.
>>> -jenn
>>
Explain about "lack of dampener springs" please.
I dont know how clutches work, just that mine has been slipping, hot, smelly, and it
doesnt engage near the top of the pedal anymore. Most of this was when snow wheeling
or on hill climbs in the last couple of months. I am actually suprised I have not
had troubles with it sooner. I need to replace it prior to doing much crawling this
spring.
-jenn
On Wed, 7 Feb 2007 20:14:23 -0800, "L.W. \(Bill\) ------ III" <----------@***.net>
wrote:
>>Hi Jennifer,
>> I think you'll be happiest with a remanufactured or new stock disk and
>>pressure plate. The heavy duty stuff you might not like the chattering of
>>the heat resistant compounds and lack of dampener springs. Nor having to use
>>two hands on your knee to slip it over the rocks.
>> God Bless America, Bill 0|||||||0
>>mailto:-------------------- http://www.----------.com/
>>"jbjeep" <jbjeep@saw.net> wrote in message
>>news:u44ls2dvhr86r52iauuef85brs248imsts@4ax.com. ..
>>> I need to replace the clutch in my TJ. Any recommendations for good
>>> aftermarket brands? I need something strong that will hold up for another
>>8-9
>>> years! Thanks.
>>> -jenn
>>
#8
Guest
Posts: n/a
Re: Clutch?
Would I notice more noise in there? lol.
Explain about "lack of dampener springs" please.
I dont know how clutches work, just that mine has been slipping, hot, smelly, and it
doesnt engage near the top of the pedal anymore. Most of this was when snow wheeling
or on hill climbs in the last couple of months. I am actually suprised I have not
had troubles with it sooner. I need to replace it prior to doing much crawling this
spring.
-jenn
On Wed, 7 Feb 2007 20:14:23 -0800, "L.W. \(Bill\) ------ III" <----------@***.net>
wrote:
>>Hi Jennifer,
>> I think you'll be happiest with a remanufactured or new stock disk and
>>pressure plate. The heavy duty stuff you might not like the chattering of
>>the heat resistant compounds and lack of dampener springs. Nor having to use
>>two hands on your knee to slip it over the rocks.
>> God Bless America, Bill 0|||||||0
>>mailto:-------------------- http://www.----------.com/
>>"jbjeep" <jbjeep@saw.net> wrote in message
>>news:u44ls2dvhr86r52iauuef85brs248imsts@4ax.com. ..
>>> I need to replace the clutch in my TJ. Any recommendations for good
>>> aftermarket brands? I need something strong that will hold up for another
>>8-9
>>> years! Thanks.
>>> -jenn
>>
Explain about "lack of dampener springs" please.
I dont know how clutches work, just that mine has been slipping, hot, smelly, and it
doesnt engage near the top of the pedal anymore. Most of this was when snow wheeling
or on hill climbs in the last couple of months. I am actually suprised I have not
had troubles with it sooner. I need to replace it prior to doing much crawling this
spring.
-jenn
On Wed, 7 Feb 2007 20:14:23 -0800, "L.W. \(Bill\) ------ III" <----------@***.net>
wrote:
>>Hi Jennifer,
>> I think you'll be happiest with a remanufactured or new stock disk and
>>pressure plate. The heavy duty stuff you might not like the chattering of
>>the heat resistant compounds and lack of dampener springs. Nor having to use
>>two hands on your knee to slip it over the rocks.
>> God Bless America, Bill 0|||||||0
>>mailto:-------------------- http://www.----------.com/
>>"jbjeep" <jbjeep@saw.net> wrote in message
>>news:u44ls2dvhr86r52iauuef85brs248imsts@4ax.com. ..
>>> I need to replace the clutch in my TJ. Any recommendations for good
>>> aftermarket brands? I need something strong that will hold up for another
>>8-9
>>> years! Thanks.
>>> -jenn
>>
#9
Guest
Posts: n/a
Re: Clutch?
Would I notice more noise in there? lol.
Explain about "lack of dampener springs" please.
I dont know how clutches work, just that mine has been slipping, hot, smelly, and it
doesnt engage near the top of the pedal anymore. Most of this was when snow wheeling
or on hill climbs in the last couple of months. I am actually suprised I have not
had troubles with it sooner. I need to replace it prior to doing much crawling this
spring.
-jenn
On Wed, 7 Feb 2007 20:14:23 -0800, "L.W. \(Bill\) ------ III" <----------@***.net>
wrote:
>>Hi Jennifer,
>> I think you'll be happiest with a remanufactured or new stock disk and
>>pressure plate. The heavy duty stuff you might not like the chattering of
>>the heat resistant compounds and lack of dampener springs. Nor having to use
>>two hands on your knee to slip it over the rocks.
>> God Bless America, Bill 0|||||||0
>>mailto:-------------------- http://www.----------.com/
>>"jbjeep" <jbjeep@saw.net> wrote in message
>>news:u44ls2dvhr86r52iauuef85brs248imsts@4ax.com. ..
>>> I need to replace the clutch in my TJ. Any recommendations for good
>>> aftermarket brands? I need something strong that will hold up for another
>>8-9
>>> years! Thanks.
>>> -jenn
>>
Explain about "lack of dampener springs" please.
I dont know how clutches work, just that mine has been slipping, hot, smelly, and it
doesnt engage near the top of the pedal anymore. Most of this was when snow wheeling
or on hill climbs in the last couple of months. I am actually suprised I have not
had troubles with it sooner. I need to replace it prior to doing much crawling this
spring.
-jenn
On Wed, 7 Feb 2007 20:14:23 -0800, "L.W. \(Bill\) ------ III" <----------@***.net>
wrote:
>>Hi Jennifer,
>> I think you'll be happiest with a remanufactured or new stock disk and
>>pressure plate. The heavy duty stuff you might not like the chattering of
>>the heat resistant compounds and lack of dampener springs. Nor having to use
>>two hands on your knee to slip it over the rocks.
>> God Bless America, Bill 0|||||||0
>>mailto:-------------------- http://www.----------.com/
>>"jbjeep" <jbjeep@saw.net> wrote in message
>>news:u44ls2dvhr86r52iauuef85brs248imsts@4ax.com. ..
>>> I need to replace the clutch in my TJ. Any recommendations for good
>>> aftermarket brands? I need something strong that will hold up for another
>>8-9
>>> years! Thanks.
>>> -jenn
>>
#10
Guest
Posts: n/a
Re: Clutch?
Hi Jennifer,
The dampener springs are on a radius separating the center disk from
traction pad: http://www.----------.com/clutch/ The racing type centrifugal
pressure plates with the fingers are the ones that two men an a small boy to
disengage. A Corvette "street" twin disk:
http://tradezone.com/vette/mcleod.html Which probably releases with a bang,
that'll feel like some hit you in the back with a sledge hammer.
God Bless America, Bill 0|||||||0
mailto:--------------------
"jbjeep" <jbjeep@saw.net> wrote in message
news:el9ls25r9n9ruoddq9b9f19jdq1d9inq6c@4ax.com...
> Would I notice more noise in there? lol.
>
> Explain about "lack of dampener springs" please.
>
> I dont know how clutches work, just that mine has been slipping, hot,
smelly, and it
> doesnt engage near the top of the pedal anymore. Most of this was when
snow wheeling
> or on hill climbs in the last couple of months. I am actually suprised I
have not
> had troubles with it sooner. I need to replace it prior to doing much
crawling this
> spring.
> -jenn
The dampener springs are on a radius separating the center disk from
traction pad: http://www.----------.com/clutch/ The racing type centrifugal
pressure plates with the fingers are the ones that two men an a small boy to
disengage. A Corvette "street" twin disk:
http://tradezone.com/vette/mcleod.html Which probably releases with a bang,
that'll feel like some hit you in the back with a sledge hammer.
God Bless America, Bill 0|||||||0
mailto:--------------------
"jbjeep" <jbjeep@saw.net> wrote in message
news:el9ls25r9n9ruoddq9b9f19jdq1d9inq6c@4ax.com...
> Would I notice more noise in there? lol.
>
> Explain about "lack of dampener springs" please.
>
> I dont know how clutches work, just that mine has been slipping, hot,
smelly, and it
> doesnt engage near the top of the pedal anymore. Most of this was when
snow wheeling
> or on hill climbs in the last couple of months. I am actually suprised I
have not
> had troubles with it sooner. I need to replace it prior to doing much
crawling this
> spring.
> -jenn