clean injectors?
Guest
Posts: n/a
Guest
Posts: n/a
Guest
Posts: n/a
Guest
Posts: n/a
Re: clean injectors?
I strongly recommend AGAINST the toothbrush - unless you first soak
the handle to be sure the plastic and bristles don't melt in the
cleaner. That disolved plastic is one flaming bitch to clean out once
you get it in there. I use some fairly soft metal brushes I bought to
clean my guns - the ones for a .22 are especially handy in the corners
- just don't get overly vigorous.
On Fri, 11 Feb 2005 02:09:43 UTC "Jo Bo" <jromas@columbus.rr.com>
wrote:
> A tooth brush and carb cleaner!
>
> JoBo
>
> "Dave Lee" <daveleejd@***.net> wrote in message
> news:CUTOd.35363$2p.34830@lakeread08...
> > OK, crank sensor it was. It starts and runs. Now that I dumped all sorts
> > of starting fluids and old gas down the tube to attempt to start my YJ, I
> > think my injectors are dirty. I get a little "bucking" now and then while
> > driving. I have to admit, when I took the intake off the body ( what 25
> > years ago I would have called the carb), inside looked horrible. All black
> > a sooty and gummy. I also suspect that gas I poured in there was perhaps 2
> > cycle mix.
> >
> >
> > I already have replaced all the electrical components, so therefore I am
> > assuming I am having a fuel issue now.
> >
> > Any ideas on how to clean this area?
> >
> > Thanks all,
> > you've been a wonderful resource so far.
> >
>
>
--
Will Honea
the handle to be sure the plastic and bristles don't melt in the
cleaner. That disolved plastic is one flaming bitch to clean out once
you get it in there. I use some fairly soft metal brushes I bought to
clean my guns - the ones for a .22 are especially handy in the corners
- just don't get overly vigorous.
On Fri, 11 Feb 2005 02:09:43 UTC "Jo Bo" <jromas@columbus.rr.com>
wrote:
> A tooth brush and carb cleaner!
>
> JoBo
>
> "Dave Lee" <daveleejd@***.net> wrote in message
> news:CUTOd.35363$2p.34830@lakeread08...
> > OK, crank sensor it was. It starts and runs. Now that I dumped all sorts
> > of starting fluids and old gas down the tube to attempt to start my YJ, I
> > think my injectors are dirty. I get a little "bucking" now and then while
> > driving. I have to admit, when I took the intake off the body ( what 25
> > years ago I would have called the carb), inside looked horrible. All black
> > a sooty and gummy. I also suspect that gas I poured in there was perhaps 2
> > cycle mix.
> >
> >
> > I already have replaced all the electrical components, so therefore I am
> > assuming I am having a fuel issue now.
> >
> > Any ideas on how to clean this area?
> >
> > Thanks all,
> > you've been a wonderful resource so far.
> >
>
>
--
Will Honea
Guest
Posts: n/a
Re: clean injectors?
I strongly recommend AGAINST the toothbrush - unless you first soak
the handle to be sure the plastic and bristles don't melt in the
cleaner. That disolved plastic is one flaming bitch to clean out once
you get it in there. I use some fairly soft metal brushes I bought to
clean my guns - the ones for a .22 are especially handy in the corners
- just don't get overly vigorous.
On Fri, 11 Feb 2005 02:09:43 UTC "Jo Bo" <jromas@columbus.rr.com>
wrote:
> A tooth brush and carb cleaner!
>
> JoBo
>
> "Dave Lee" <daveleejd@***.net> wrote in message
> news:CUTOd.35363$2p.34830@lakeread08...
> > OK, crank sensor it was. It starts and runs. Now that I dumped all sorts
> > of starting fluids and old gas down the tube to attempt to start my YJ, I
> > think my injectors are dirty. I get a little "bucking" now and then while
> > driving. I have to admit, when I took the intake off the body ( what 25
> > years ago I would have called the carb), inside looked horrible. All black
> > a sooty and gummy. I also suspect that gas I poured in there was perhaps 2
> > cycle mix.
> >
> >
> > I already have replaced all the electrical components, so therefore I am
> > assuming I am having a fuel issue now.
> >
> > Any ideas on how to clean this area?
> >
> > Thanks all,
> > you've been a wonderful resource so far.
> >
>
>
--
Will Honea
the handle to be sure the plastic and bristles don't melt in the
cleaner. That disolved plastic is one flaming bitch to clean out once
you get it in there. I use some fairly soft metal brushes I bought to
clean my guns - the ones for a .22 are especially handy in the corners
- just don't get overly vigorous.
On Fri, 11 Feb 2005 02:09:43 UTC "Jo Bo" <jromas@columbus.rr.com>
wrote:
> A tooth brush and carb cleaner!
>
> JoBo
>
> "Dave Lee" <daveleejd@***.net> wrote in message
> news:CUTOd.35363$2p.34830@lakeread08...
> > OK, crank sensor it was. It starts and runs. Now that I dumped all sorts
> > of starting fluids and old gas down the tube to attempt to start my YJ, I
> > think my injectors are dirty. I get a little "bucking" now and then while
> > driving. I have to admit, when I took the intake off the body ( what 25
> > years ago I would have called the carb), inside looked horrible. All black
> > a sooty and gummy. I also suspect that gas I poured in there was perhaps 2
> > cycle mix.
> >
> >
> > I already have replaced all the electrical components, so therefore I am
> > assuming I am having a fuel issue now.
> >
> > Any ideas on how to clean this area?
> >
> > Thanks all,
> > you've been a wonderful resource so far.
> >
>
>
--
Will Honea
Guest
Posts: n/a
Re: clean injectors?
I strongly recommend AGAINST the toothbrush - unless you first soak
the handle to be sure the plastic and bristles don't melt in the
cleaner. That disolved plastic is one flaming bitch to clean out once
you get it in there. I use some fairly soft metal brushes I bought to
clean my guns - the ones for a .22 are especially handy in the corners
- just don't get overly vigorous.
On Fri, 11 Feb 2005 02:09:43 UTC "Jo Bo" <jromas@columbus.rr.com>
wrote:
> A tooth brush and carb cleaner!
>
> JoBo
>
> "Dave Lee" <daveleejd@***.net> wrote in message
> news:CUTOd.35363$2p.34830@lakeread08...
> > OK, crank sensor it was. It starts and runs. Now that I dumped all sorts
> > of starting fluids and old gas down the tube to attempt to start my YJ, I
> > think my injectors are dirty. I get a little "bucking" now and then while
> > driving. I have to admit, when I took the intake off the body ( what 25
> > years ago I would have called the carb), inside looked horrible. All black
> > a sooty and gummy. I also suspect that gas I poured in there was perhaps 2
> > cycle mix.
> >
> >
> > I already have replaced all the electrical components, so therefore I am
> > assuming I am having a fuel issue now.
> >
> > Any ideas on how to clean this area?
> >
> > Thanks all,
> > you've been a wonderful resource so far.
> >
>
>
--
Will Honea
the handle to be sure the plastic and bristles don't melt in the
cleaner. That disolved plastic is one flaming bitch to clean out once
you get it in there. I use some fairly soft metal brushes I bought to
clean my guns - the ones for a .22 are especially handy in the corners
- just don't get overly vigorous.
On Fri, 11 Feb 2005 02:09:43 UTC "Jo Bo" <jromas@columbus.rr.com>
wrote:
> A tooth brush and carb cleaner!
>
> JoBo
>
> "Dave Lee" <daveleejd@***.net> wrote in message
> news:CUTOd.35363$2p.34830@lakeread08...
> > OK, crank sensor it was. It starts and runs. Now that I dumped all sorts
> > of starting fluids and old gas down the tube to attempt to start my YJ, I
> > think my injectors are dirty. I get a little "bucking" now and then while
> > driving. I have to admit, when I took the intake off the body ( what 25
> > years ago I would have called the carb), inside looked horrible. All black
> > a sooty and gummy. I also suspect that gas I poured in there was perhaps 2
> > cycle mix.
> >
> >
> > I already have replaced all the electrical components, so therefore I am
> > assuming I am having a fuel issue now.
> >
> > Any ideas on how to clean this area?
> >
> > Thanks all,
> > you've been a wonderful resource so far.
> >
>
>
--
Will Honea
Guest
Posts: n/a
Re: clean injectors?
so is that stuff really good or something?
"popeyeball" <popeyeball@yahoo.com> wrote in message
news:1108096406.136974.72600@c13g2000cwb.googlegro ups.com...
> http://store.yahoo.com/bbjeep2/jeepbgadfuel.html
>
"popeyeball" <popeyeball@yahoo.com> wrote in message
news:1108096406.136974.72600@c13g2000cwb.googlegro ups.com...
> http://store.yahoo.com/bbjeep2/jeepbgadfuel.html
>
Guest
Posts: n/a
Re: clean injectors?
so is that stuff really good or something?
"popeyeball" <popeyeball@yahoo.com> wrote in message
news:1108096406.136974.72600@c13g2000cwb.googlegro ups.com...
> http://store.yahoo.com/bbjeep2/jeepbgadfuel.html
>
"popeyeball" <popeyeball@yahoo.com> wrote in message
news:1108096406.136974.72600@c13g2000cwb.googlegro ups.com...
> http://store.yahoo.com/bbjeep2/jeepbgadfuel.html
>
Guest
Posts: n/a
Re: clean injectors?
so is that stuff really good or something?
"popeyeball" <popeyeball@yahoo.com> wrote in message
news:1108096406.136974.72600@c13g2000cwb.googlegro ups.com...
> http://store.yahoo.com/bbjeep2/jeepbgadfuel.html
>
"popeyeball" <popeyeball@yahoo.com> wrote in message
news:1108096406.136974.72600@c13g2000cwb.googlegro ups.com...
> http://store.yahoo.com/bbjeep2/jeepbgadfuel.html
>
Guest
Posts: n/a
Re: clean injectors?
One out of many daves did pass the time by typing:
> so is that stuff really good or something?
I'll stick with seafoam from NAPA.
> "popeyeball" wrote ...
>> http://store.yahoo.com/bbjeep2/jeepbgadfuel.html
> so is that stuff really good or something?
I'll stick with seafoam from NAPA.
> "popeyeball" wrote ...
>> http://store.yahoo.com/bbjeep2/jeepbgadfuel.html
