clanking sound that driving me nuts.
#121
Guest
Posts: n/a
Re: clanking sound that driving me nuts.
The inside of a torque converter looks like 2 fan blades really close
together. One is spinning when the engine is turning, and the other spins
when the fluid "spins" from the first fan. This is what moves the vehicle.
The torque converter locks up when the computer detects that the
transmission is in overdrive and the load on the engine and throttle opening
indicate that the vehicle is "cruising". The converter has a clutch in it
which is activated when the computer energizes a switch in the transmission.
Basically what this does is makes the converter a direct drive, much like
releasing the clutch pedal on a manual transmission. It all but eliminates
any slippage in the converter. The benefits are less heat in the
transmission fluid, lower engine RPM under cruise conditions and usually
better fuel economy. By design, the slippage is usually between 5 and 10%.
Chris
<lilgrasshopper@gmail.com> wrote in message
news:1154438425.966235.243070@i3g2000cwc.googlegro ups.com...
>I took it to the transmission guy and he was like, hey, I took it for a
> ride, did not hear the sound. Have a nice day. So I told him, man, it
> only gets hot in stop and go traffic.
>
> What do you mean when you said "the torq converter locks up" ??
>
> -John
> PeoplePC news Server wrote:
>> Dude, my 97 ZJ does the exact same thing after having my trans rebuilt.
>> Only
>> does it when it is hot out, long slow moving traffic or slow moving on
>> the
>> trails. It got so bad once it sounded like a bolt wizzing and gringing
>> around the scatter shield between the trans and engine block so I shut
>> her
>> down, removed the access panel to see if the guy forgot to tighten up a
>> torq
>> converter bolt, but nothing was lose or missing..?? I let it cool for
>> about
>> an hour, started her up and all was fine..?? Over the months I noticed
>> the
>> clanking will go away once the torq converter locks up, I even have the
>> sound on video as I record allot of our trail rides with a bumper cam,
>> showed it to the dude that rebuilt my trans (from Mr Transmission) and he
>> swears that sound could not be comming from the transmission... But it IS
>> comming from the transmission, so I will prolly have to eat another
>> rebuild
>> sooner or later cuz of that noise..
>>
>> Now, I do have close to 100K miles on that rebuild though, I change my
>> fluid
>> and filter every 30K - 40K miles as I am terrably rough on her, and can
>> drive 400 miles in a bad week for my job while rolling 32" mud tires,
>> factory gearing and a 4" lift. Very embarrassing to pass other trail
>> riders
>> as I am sure they think it is a rod knocking, my clanking will get so bad
>> it
>> WILL make the noise in N or park, the olny cure I have found is to either
>> stop and let her cool down or drive maybe 30 miles on the highway so the
>> torq converter will lock then it will cool down on it's own and stop the
>> noise. I had the trans guy put an external trans cooler with a rather
>> large
>> fan on it right after I 1st noticed the clanking sound, did not help but
>> I
>> am sure it did not hurt either..
>>
>> Jerry..
>>
>> <lilgrasshopper@gmail.com> wrote in message
>> news:1153710466.306465.198680@p79g2000cwp.googlegr oups.com...
>> > Hi all,
>> >
>> > I have a 1995 Jeep Grand Cherokee from hell.
>> >
>> > I recently had the transmisson rebuilt. (It was not engaging). I also
>> > had the radiator replaced. Because the engine was reving and the
>> > transmission was not engaging, it blew the radiator.
>> >
>> > Now:
>> >
>> > I can drive on the highway all day and nothing bad will happen but once
>> > I get into stop and go traffic, like today, on a hot day, I would start
>> > to hear some clanking, then it would get louder, like something
>> > spinning and hitting something else. If I press on the gas pedal to go
>> > faster, the clanking sound would be faster, more frequent so I am
>> > thinking it has something to do with something spinning while I press
>> > on the gas pedal (yeah, really car smart there, lol), if I put it Park,
>> > the sound goes away but if I put it in drive to start driving, it would
>> > make the clanking sound, hard to explain the sound, like a fan is
>> > running and you stick a pencil into it...I think. Now, the thing is, if
>> > I pull the car over, pop the hood, wait like 10 mins, snap the hood,
>> > and start driving, the sound is gone. When I popped the hood, the
>> > engine was really hot but like I said, today was like 90 outside. So to
>> > sum up..
>> >
>> > 1. Drive on highway -- Fine.
>> > 2. Stop and go traffic on hot day --- start to hear clicking sound
>> > follows by clanking sound.
>> > 3. Put car in Park the sound goes away.
>> > 4. Pop the hood, let the engine cool for a few minutes, the sound goes
>> > away.
>> > 5. Recently had the Tranmission rebuilt, radiator replaced.
>> >
>> >
>> > The thing is, it is hard to troubleshoot, if I take it to the repair
>> > shop, I would have to have it making the sound but when it happens, I'm
>> > afraid to keep on driving so I'd pull over and pop the hood to let it
>> > cool now. I don't want to ruin whatever that is making that clanking
>> > sound.
>> > Also, the car has a strong hum sound, like ummmmmmmmmmm sound, could be
>> > from the exhaust system, not sure if it's related.
>> >
>> > Any suggestion help , idea is really apreciated.
>> >
>> > -J.
>> >
>
together. One is spinning when the engine is turning, and the other spins
when the fluid "spins" from the first fan. This is what moves the vehicle.
The torque converter locks up when the computer detects that the
transmission is in overdrive and the load on the engine and throttle opening
indicate that the vehicle is "cruising". The converter has a clutch in it
which is activated when the computer energizes a switch in the transmission.
Basically what this does is makes the converter a direct drive, much like
releasing the clutch pedal on a manual transmission. It all but eliminates
any slippage in the converter. The benefits are less heat in the
transmission fluid, lower engine RPM under cruise conditions and usually
better fuel economy. By design, the slippage is usually between 5 and 10%.
Chris
<lilgrasshopper@gmail.com> wrote in message
news:1154438425.966235.243070@i3g2000cwc.googlegro ups.com...
>I took it to the transmission guy and he was like, hey, I took it for a
> ride, did not hear the sound. Have a nice day. So I told him, man, it
> only gets hot in stop and go traffic.
>
> What do you mean when you said "the torq converter locks up" ??
>
> -John
> PeoplePC news Server wrote:
>> Dude, my 97 ZJ does the exact same thing after having my trans rebuilt.
>> Only
>> does it when it is hot out, long slow moving traffic or slow moving on
>> the
>> trails. It got so bad once it sounded like a bolt wizzing and gringing
>> around the scatter shield between the trans and engine block so I shut
>> her
>> down, removed the access panel to see if the guy forgot to tighten up a
>> torq
>> converter bolt, but nothing was lose or missing..?? I let it cool for
>> about
>> an hour, started her up and all was fine..?? Over the months I noticed
>> the
>> clanking will go away once the torq converter locks up, I even have the
>> sound on video as I record allot of our trail rides with a bumper cam,
>> showed it to the dude that rebuilt my trans (from Mr Transmission) and he
>> swears that sound could not be comming from the transmission... But it IS
>> comming from the transmission, so I will prolly have to eat another
>> rebuild
>> sooner or later cuz of that noise..
>>
>> Now, I do have close to 100K miles on that rebuild though, I change my
>> fluid
>> and filter every 30K - 40K miles as I am terrably rough on her, and can
>> drive 400 miles in a bad week for my job while rolling 32" mud tires,
>> factory gearing and a 4" lift. Very embarrassing to pass other trail
>> riders
>> as I am sure they think it is a rod knocking, my clanking will get so bad
>> it
>> WILL make the noise in N or park, the olny cure I have found is to either
>> stop and let her cool down or drive maybe 30 miles on the highway so the
>> torq converter will lock then it will cool down on it's own and stop the
>> noise. I had the trans guy put an external trans cooler with a rather
>> large
>> fan on it right after I 1st noticed the clanking sound, did not help but
>> I
>> am sure it did not hurt either..
>>
>> Jerry..
>>
>> <lilgrasshopper@gmail.com> wrote in message
>> news:1153710466.306465.198680@p79g2000cwp.googlegr oups.com...
>> > Hi all,
>> >
>> > I have a 1995 Jeep Grand Cherokee from hell.
>> >
>> > I recently had the transmisson rebuilt. (It was not engaging). I also
>> > had the radiator replaced. Because the engine was reving and the
>> > transmission was not engaging, it blew the radiator.
>> >
>> > Now:
>> >
>> > I can drive on the highway all day and nothing bad will happen but once
>> > I get into stop and go traffic, like today, on a hot day, I would start
>> > to hear some clanking, then it would get louder, like something
>> > spinning and hitting something else. If I press on the gas pedal to go
>> > faster, the clanking sound would be faster, more frequent so I am
>> > thinking it has something to do with something spinning while I press
>> > on the gas pedal (yeah, really car smart there, lol), if I put it Park,
>> > the sound goes away but if I put it in drive to start driving, it would
>> > make the clanking sound, hard to explain the sound, like a fan is
>> > running and you stick a pencil into it...I think. Now, the thing is, if
>> > I pull the car over, pop the hood, wait like 10 mins, snap the hood,
>> > and start driving, the sound is gone. When I popped the hood, the
>> > engine was really hot but like I said, today was like 90 outside. So to
>> > sum up..
>> >
>> > 1. Drive on highway -- Fine.
>> > 2. Stop and go traffic on hot day --- start to hear clicking sound
>> > follows by clanking sound.
>> > 3. Put car in Park the sound goes away.
>> > 4. Pop the hood, let the engine cool for a few minutes, the sound goes
>> > away.
>> > 5. Recently had the Tranmission rebuilt, radiator replaced.
>> >
>> >
>> > The thing is, it is hard to troubleshoot, if I take it to the repair
>> > shop, I would have to have it making the sound but when it happens, I'm
>> > afraid to keep on driving so I'd pull over and pop the hood to let it
>> > cool now. I don't want to ruin whatever that is making that clanking
>> > sound.
>> > Also, the car has a strong hum sound, like ummmmmmmmmmm sound, could be
>> > from the exhaust system, not sure if it's related.
>> >
>> > Any suggestion help , idea is really apreciated.
>> >
>> > -J.
>> >
>
#122
Guest
Posts: n/a
Re: clanking sound that driving me nuts.
Thanks.
Well, when I had my radiator done, the guy said I should get a flush.
Would it make sense to reason that the transmission is not getting
cooled sufficiently causing the clanking (read my post and responses).
A radiator cooling system flush will/probably help? I am tired of
taking it to the guy and he's giving me the "see no evil, hear no evil"
treating. What noise? I don't hear any noise.
*sigh*
c wrote:
> The inside of a torque converter looks like 2 fan blades really close
> together. One is spinning when the engine is turning, and the other spins
> when the fluid "spins" from the first fan. This is what moves the vehicle.
> The torque converter locks up when the computer detects that the
> transmission is in overdrive and the load on the engine and throttle opening
> indicate that the vehicle is "cruising". The converter has a clutch in it
> which is activated when the computer energizes a switch in the transmission.
> Basically what this does is makes the converter a direct drive, much like
> releasing the clutch pedal on a manual transmission. It all but eliminates
> any slippage in the converter. The benefits are less heat in the
> transmission fluid, lower engine RPM under cruise conditions and usually
> better fuel economy. By design, the slippage is usually between 5 and 10%.
>
> Chris
>
> <lilgrasshopper@gmail.com> wrote in message
> news:1154438425.966235.243070@i3g2000cwc.googlegro ups.com...
> >I took it to the transmission guy and he was like, hey, I took it for a
> > ride, did not hear the sound. Have a nice day. So I told him, man, it
> > only gets hot in stop and go traffic.
> >
> > What do you mean when you said "the torq converter locks up" ??
> >
> > -John
> > PeoplePC news Server wrote:
> >> Dude, my 97 ZJ does the exact same thing after having my trans rebuilt.
> >> Only
> >> does it when it is hot out, long slow moving traffic or slow moving on
> >> the
> >> trails. It got so bad once it sounded like a bolt wizzing and gringing
> >> around the scatter shield between the trans and engine block so I shut
> >> her
> >> down, removed the access panel to see if the guy forgot to tighten up a
> >> torq
> >> converter bolt, but nothing was lose or missing..?? I let it cool for
> >> about
> >> an hour, started her up and all was fine..?? Over the months I noticed
> >> the
> >> clanking will go away once the torq converter locks up, I even have the
> >> sound on video as I record allot of our trail rides with a bumper cam,
> >> showed it to the dude that rebuilt my trans (from Mr Transmission) and he
> >> swears that sound could not be comming from the transmission... But it IS
> >> comming from the transmission, so I will prolly have to eat another
> >> rebuild
> >> sooner or later cuz of that noise..
> >>
> >> Now, I do have close to 100K miles on that rebuild though, I change my
> >> fluid
> >> and filter every 30K - 40K miles as I am terrably rough on her, and can
> >> drive 400 miles in a bad week for my job while rolling 32" mud tires,
> >> factory gearing and a 4" lift. Very embarrassing to pass other trail
> >> riders
> >> as I am sure they think it is a rod knocking, my clanking will get so bad
> >> it
> >> WILL make the noise in N or park, the olny cure I have found is to either
> >> stop and let her cool down or drive maybe 30 miles on the highway so the
> >> torq converter will lock then it will cool down on it's own and stop the
> >> noise. I had the trans guy put an external trans cooler with a rather
> >> large
> >> fan on it right after I 1st noticed the clanking sound, did not help but
> >> I
> >> am sure it did not hurt either..
> >>
> >> Jerry..
> >>
> >> <lilgrasshopper@gmail.com> wrote in message
> >> news:1153710466.306465.198680@p79g2000cwp.googlegr oups.com...
> >> > Hi all,
> >> >
> >> > I have a 1995 Jeep Grand Cherokee from hell.
> >> >
> >> > I recently had the transmisson rebuilt. (It was not engaging). I also
> >> > had the radiator replaced. Because the engine was reving and the
> >> > transmission was not engaging, it blew the radiator.
> >> >
> >> > Now:
> >> >
> >> > I can drive on the highway all day and nothing bad will happen but once
> >> > I get into stop and go traffic, like today, on a hot day, I would start
> >> > to hear some clanking, then it would get louder, like something
> >> > spinning and hitting something else. If I press on the gas pedal to go
> >> > faster, the clanking sound would be faster, more frequent so I am
> >> > thinking it has something to do with something spinning while I press
> >> > on the gas pedal (yeah, really car smart there, lol), if I put it Park,
> >> > the sound goes away but if I put it in drive to start driving, it would
> >> > make the clanking sound, hard to explain the sound, like a fan is
> >> > running and you stick a pencil into it...I think. Now, the thing is, if
> >> > I pull the car over, pop the hood, wait like 10 mins, snap the hood,
> >> > and start driving, the sound is gone. When I popped the hood, the
> >> > engine was really hot but like I said, today was like 90 outside. So to
> >> > sum up..
> >> >
> >> > 1. Drive on highway -- Fine.
> >> > 2. Stop and go traffic on hot day --- start to hear clicking sound
> >> > follows by clanking sound.
> >> > 3. Put car in Park the sound goes away.
> >> > 4. Pop the hood, let the engine cool for a few minutes, the sound goes
> >> > away.
> >> > 5. Recently had the Tranmission rebuilt, radiator replaced.
> >> >
> >> >
> >> > The thing is, it is hard to troubleshoot, if I take it to the repair
> >> > shop, I would have to have it making the sound but when it happens, I'm
> >> > afraid to keep on driving so I'd pull over and pop the hood to let it
> >> > cool now. I don't want to ruin whatever that is making that clanking
> >> > sound.
> >> > Also, the car has a strong hum sound, like ummmmmmmmmmm sound, could be
> >> > from the exhaust system, not sure if it's related.
> >> >
> >> > Any suggestion help , idea is really apreciated.
> >> >
> >> > -J.
> >> >
> >
Well, when I had my radiator done, the guy said I should get a flush.
Would it make sense to reason that the transmission is not getting
cooled sufficiently causing the clanking (read my post and responses).
A radiator cooling system flush will/probably help? I am tired of
taking it to the guy and he's giving me the "see no evil, hear no evil"
treating. What noise? I don't hear any noise.
*sigh*
c wrote:
> The inside of a torque converter looks like 2 fan blades really close
> together. One is spinning when the engine is turning, and the other spins
> when the fluid "spins" from the first fan. This is what moves the vehicle.
> The torque converter locks up when the computer detects that the
> transmission is in overdrive and the load on the engine and throttle opening
> indicate that the vehicle is "cruising". The converter has a clutch in it
> which is activated when the computer energizes a switch in the transmission.
> Basically what this does is makes the converter a direct drive, much like
> releasing the clutch pedal on a manual transmission. It all but eliminates
> any slippage in the converter. The benefits are less heat in the
> transmission fluid, lower engine RPM under cruise conditions and usually
> better fuel economy. By design, the slippage is usually between 5 and 10%.
>
> Chris
>
> <lilgrasshopper@gmail.com> wrote in message
> news:1154438425.966235.243070@i3g2000cwc.googlegro ups.com...
> >I took it to the transmission guy and he was like, hey, I took it for a
> > ride, did not hear the sound. Have a nice day. So I told him, man, it
> > only gets hot in stop and go traffic.
> >
> > What do you mean when you said "the torq converter locks up" ??
> >
> > -John
> > PeoplePC news Server wrote:
> >> Dude, my 97 ZJ does the exact same thing after having my trans rebuilt.
> >> Only
> >> does it when it is hot out, long slow moving traffic or slow moving on
> >> the
> >> trails. It got so bad once it sounded like a bolt wizzing and gringing
> >> around the scatter shield between the trans and engine block so I shut
> >> her
> >> down, removed the access panel to see if the guy forgot to tighten up a
> >> torq
> >> converter bolt, but nothing was lose or missing..?? I let it cool for
> >> about
> >> an hour, started her up and all was fine..?? Over the months I noticed
> >> the
> >> clanking will go away once the torq converter locks up, I even have the
> >> sound on video as I record allot of our trail rides with a bumper cam,
> >> showed it to the dude that rebuilt my trans (from Mr Transmission) and he
> >> swears that sound could not be comming from the transmission... But it IS
> >> comming from the transmission, so I will prolly have to eat another
> >> rebuild
> >> sooner or later cuz of that noise..
> >>
> >> Now, I do have close to 100K miles on that rebuild though, I change my
> >> fluid
> >> and filter every 30K - 40K miles as I am terrably rough on her, and can
> >> drive 400 miles in a bad week for my job while rolling 32" mud tires,
> >> factory gearing and a 4" lift. Very embarrassing to pass other trail
> >> riders
> >> as I am sure they think it is a rod knocking, my clanking will get so bad
> >> it
> >> WILL make the noise in N or park, the olny cure I have found is to either
> >> stop and let her cool down or drive maybe 30 miles on the highway so the
> >> torq converter will lock then it will cool down on it's own and stop the
> >> noise. I had the trans guy put an external trans cooler with a rather
> >> large
> >> fan on it right after I 1st noticed the clanking sound, did not help but
> >> I
> >> am sure it did not hurt either..
> >>
> >> Jerry..
> >>
> >> <lilgrasshopper@gmail.com> wrote in message
> >> news:1153710466.306465.198680@p79g2000cwp.googlegr oups.com...
> >> > Hi all,
> >> >
> >> > I have a 1995 Jeep Grand Cherokee from hell.
> >> >
> >> > I recently had the transmisson rebuilt. (It was not engaging). I also
> >> > had the radiator replaced. Because the engine was reving and the
> >> > transmission was not engaging, it blew the radiator.
> >> >
> >> > Now:
> >> >
> >> > I can drive on the highway all day and nothing bad will happen but once
> >> > I get into stop and go traffic, like today, on a hot day, I would start
> >> > to hear some clanking, then it would get louder, like something
> >> > spinning and hitting something else. If I press on the gas pedal to go
> >> > faster, the clanking sound would be faster, more frequent so I am
> >> > thinking it has something to do with something spinning while I press
> >> > on the gas pedal (yeah, really car smart there, lol), if I put it Park,
> >> > the sound goes away but if I put it in drive to start driving, it would
> >> > make the clanking sound, hard to explain the sound, like a fan is
> >> > running and you stick a pencil into it...I think. Now, the thing is, if
> >> > I pull the car over, pop the hood, wait like 10 mins, snap the hood,
> >> > and start driving, the sound is gone. When I popped the hood, the
> >> > engine was really hot but like I said, today was like 90 outside. So to
> >> > sum up..
> >> >
> >> > 1. Drive on highway -- Fine.
> >> > 2. Stop and go traffic on hot day --- start to hear clicking sound
> >> > follows by clanking sound.
> >> > 3. Put car in Park the sound goes away.
> >> > 4. Pop the hood, let the engine cool for a few minutes, the sound goes
> >> > away.
> >> > 5. Recently had the Tranmission rebuilt, radiator replaced.
> >> >
> >> >
> >> > The thing is, it is hard to troubleshoot, if I take it to the repair
> >> > shop, I would have to have it making the sound but when it happens, I'm
> >> > afraid to keep on driving so I'd pull over and pop the hood to let it
> >> > cool now. I don't want to ruin whatever that is making that clanking
> >> > sound.
> >> > Also, the car has a strong hum sound, like ummmmmmmmmmm sound, could be
> >> > from the exhaust system, not sure if it's related.
> >> >
> >> > Any suggestion help , idea is really apreciated.
> >> >
> >> > -J.
> >> >
> >
#123
Guest
Posts: n/a
Re: clanking sound that driving me nuts.
Thanks.
Well, when I had my radiator done, the guy said I should get a flush.
Would it make sense to reason that the transmission is not getting
cooled sufficiently causing the clanking (read my post and responses).
A radiator cooling system flush will/probably help? I am tired of
taking it to the guy and he's giving me the "see no evil, hear no evil"
treating. What noise? I don't hear any noise.
*sigh*
c wrote:
> The inside of a torque converter looks like 2 fan blades really close
> together. One is spinning when the engine is turning, and the other spins
> when the fluid "spins" from the first fan. This is what moves the vehicle.
> The torque converter locks up when the computer detects that the
> transmission is in overdrive and the load on the engine and throttle opening
> indicate that the vehicle is "cruising". The converter has a clutch in it
> which is activated when the computer energizes a switch in the transmission.
> Basically what this does is makes the converter a direct drive, much like
> releasing the clutch pedal on a manual transmission. It all but eliminates
> any slippage in the converter. The benefits are less heat in the
> transmission fluid, lower engine RPM under cruise conditions and usually
> better fuel economy. By design, the slippage is usually between 5 and 10%.
>
> Chris
>
> <lilgrasshopper@gmail.com> wrote in message
> news:1154438425.966235.243070@i3g2000cwc.googlegro ups.com...
> >I took it to the transmission guy and he was like, hey, I took it for a
> > ride, did not hear the sound. Have a nice day. So I told him, man, it
> > only gets hot in stop and go traffic.
> >
> > What do you mean when you said "the torq converter locks up" ??
> >
> > -John
> > PeoplePC news Server wrote:
> >> Dude, my 97 ZJ does the exact same thing after having my trans rebuilt.
> >> Only
> >> does it when it is hot out, long slow moving traffic or slow moving on
> >> the
> >> trails. It got so bad once it sounded like a bolt wizzing and gringing
> >> around the scatter shield between the trans and engine block so I shut
> >> her
> >> down, removed the access panel to see if the guy forgot to tighten up a
> >> torq
> >> converter bolt, but nothing was lose or missing..?? I let it cool for
> >> about
> >> an hour, started her up and all was fine..?? Over the months I noticed
> >> the
> >> clanking will go away once the torq converter locks up, I even have the
> >> sound on video as I record allot of our trail rides with a bumper cam,
> >> showed it to the dude that rebuilt my trans (from Mr Transmission) and he
> >> swears that sound could not be comming from the transmission... But it IS
> >> comming from the transmission, so I will prolly have to eat another
> >> rebuild
> >> sooner or later cuz of that noise..
> >>
> >> Now, I do have close to 100K miles on that rebuild though, I change my
> >> fluid
> >> and filter every 30K - 40K miles as I am terrably rough on her, and can
> >> drive 400 miles in a bad week for my job while rolling 32" mud tires,
> >> factory gearing and a 4" lift. Very embarrassing to pass other trail
> >> riders
> >> as I am sure they think it is a rod knocking, my clanking will get so bad
> >> it
> >> WILL make the noise in N or park, the olny cure I have found is to either
> >> stop and let her cool down or drive maybe 30 miles on the highway so the
> >> torq converter will lock then it will cool down on it's own and stop the
> >> noise. I had the trans guy put an external trans cooler with a rather
> >> large
> >> fan on it right after I 1st noticed the clanking sound, did not help but
> >> I
> >> am sure it did not hurt either..
> >>
> >> Jerry..
> >>
> >> <lilgrasshopper@gmail.com> wrote in message
> >> news:1153710466.306465.198680@p79g2000cwp.googlegr oups.com...
> >> > Hi all,
> >> >
> >> > I have a 1995 Jeep Grand Cherokee from hell.
> >> >
> >> > I recently had the transmisson rebuilt. (It was not engaging). I also
> >> > had the radiator replaced. Because the engine was reving and the
> >> > transmission was not engaging, it blew the radiator.
> >> >
> >> > Now:
> >> >
> >> > I can drive on the highway all day and nothing bad will happen but once
> >> > I get into stop and go traffic, like today, on a hot day, I would start
> >> > to hear some clanking, then it would get louder, like something
> >> > spinning and hitting something else. If I press on the gas pedal to go
> >> > faster, the clanking sound would be faster, more frequent so I am
> >> > thinking it has something to do with something spinning while I press
> >> > on the gas pedal (yeah, really car smart there, lol), if I put it Park,
> >> > the sound goes away but if I put it in drive to start driving, it would
> >> > make the clanking sound, hard to explain the sound, like a fan is
> >> > running and you stick a pencil into it...I think. Now, the thing is, if
> >> > I pull the car over, pop the hood, wait like 10 mins, snap the hood,
> >> > and start driving, the sound is gone. When I popped the hood, the
> >> > engine was really hot but like I said, today was like 90 outside. So to
> >> > sum up..
> >> >
> >> > 1. Drive on highway -- Fine.
> >> > 2. Stop and go traffic on hot day --- start to hear clicking sound
> >> > follows by clanking sound.
> >> > 3. Put car in Park the sound goes away.
> >> > 4. Pop the hood, let the engine cool for a few minutes, the sound goes
> >> > away.
> >> > 5. Recently had the Tranmission rebuilt, radiator replaced.
> >> >
> >> >
> >> > The thing is, it is hard to troubleshoot, if I take it to the repair
> >> > shop, I would have to have it making the sound but when it happens, I'm
> >> > afraid to keep on driving so I'd pull over and pop the hood to let it
> >> > cool now. I don't want to ruin whatever that is making that clanking
> >> > sound.
> >> > Also, the car has a strong hum sound, like ummmmmmmmmmm sound, could be
> >> > from the exhaust system, not sure if it's related.
> >> >
> >> > Any suggestion help , idea is really apreciated.
> >> >
> >> > -J.
> >> >
> >
Well, when I had my radiator done, the guy said I should get a flush.
Would it make sense to reason that the transmission is not getting
cooled sufficiently causing the clanking (read my post and responses).
A radiator cooling system flush will/probably help? I am tired of
taking it to the guy and he's giving me the "see no evil, hear no evil"
treating. What noise? I don't hear any noise.
*sigh*
c wrote:
> The inside of a torque converter looks like 2 fan blades really close
> together. One is spinning when the engine is turning, and the other spins
> when the fluid "spins" from the first fan. This is what moves the vehicle.
> The torque converter locks up when the computer detects that the
> transmission is in overdrive and the load on the engine and throttle opening
> indicate that the vehicle is "cruising". The converter has a clutch in it
> which is activated when the computer energizes a switch in the transmission.
> Basically what this does is makes the converter a direct drive, much like
> releasing the clutch pedal on a manual transmission. It all but eliminates
> any slippage in the converter. The benefits are less heat in the
> transmission fluid, lower engine RPM under cruise conditions and usually
> better fuel economy. By design, the slippage is usually between 5 and 10%.
>
> Chris
>
> <lilgrasshopper@gmail.com> wrote in message
> news:1154438425.966235.243070@i3g2000cwc.googlegro ups.com...
> >I took it to the transmission guy and he was like, hey, I took it for a
> > ride, did not hear the sound. Have a nice day. So I told him, man, it
> > only gets hot in stop and go traffic.
> >
> > What do you mean when you said "the torq converter locks up" ??
> >
> > -John
> > PeoplePC news Server wrote:
> >> Dude, my 97 ZJ does the exact same thing after having my trans rebuilt.
> >> Only
> >> does it when it is hot out, long slow moving traffic or slow moving on
> >> the
> >> trails. It got so bad once it sounded like a bolt wizzing and gringing
> >> around the scatter shield between the trans and engine block so I shut
> >> her
> >> down, removed the access panel to see if the guy forgot to tighten up a
> >> torq
> >> converter bolt, but nothing was lose or missing..?? I let it cool for
> >> about
> >> an hour, started her up and all was fine..?? Over the months I noticed
> >> the
> >> clanking will go away once the torq converter locks up, I even have the
> >> sound on video as I record allot of our trail rides with a bumper cam,
> >> showed it to the dude that rebuilt my trans (from Mr Transmission) and he
> >> swears that sound could not be comming from the transmission... But it IS
> >> comming from the transmission, so I will prolly have to eat another
> >> rebuild
> >> sooner or later cuz of that noise..
> >>
> >> Now, I do have close to 100K miles on that rebuild though, I change my
> >> fluid
> >> and filter every 30K - 40K miles as I am terrably rough on her, and can
> >> drive 400 miles in a bad week for my job while rolling 32" mud tires,
> >> factory gearing and a 4" lift. Very embarrassing to pass other trail
> >> riders
> >> as I am sure they think it is a rod knocking, my clanking will get so bad
> >> it
> >> WILL make the noise in N or park, the olny cure I have found is to either
> >> stop and let her cool down or drive maybe 30 miles on the highway so the
> >> torq converter will lock then it will cool down on it's own and stop the
> >> noise. I had the trans guy put an external trans cooler with a rather
> >> large
> >> fan on it right after I 1st noticed the clanking sound, did not help but
> >> I
> >> am sure it did not hurt either..
> >>
> >> Jerry..
> >>
> >> <lilgrasshopper@gmail.com> wrote in message
> >> news:1153710466.306465.198680@p79g2000cwp.googlegr oups.com...
> >> > Hi all,
> >> >
> >> > I have a 1995 Jeep Grand Cherokee from hell.
> >> >
> >> > I recently had the transmisson rebuilt. (It was not engaging). I also
> >> > had the radiator replaced. Because the engine was reving and the
> >> > transmission was not engaging, it blew the radiator.
> >> >
> >> > Now:
> >> >
> >> > I can drive on the highway all day and nothing bad will happen but once
> >> > I get into stop and go traffic, like today, on a hot day, I would start
> >> > to hear some clanking, then it would get louder, like something
> >> > spinning and hitting something else. If I press on the gas pedal to go
> >> > faster, the clanking sound would be faster, more frequent so I am
> >> > thinking it has something to do with something spinning while I press
> >> > on the gas pedal (yeah, really car smart there, lol), if I put it Park,
> >> > the sound goes away but if I put it in drive to start driving, it would
> >> > make the clanking sound, hard to explain the sound, like a fan is
> >> > running and you stick a pencil into it...I think. Now, the thing is, if
> >> > I pull the car over, pop the hood, wait like 10 mins, snap the hood,
> >> > and start driving, the sound is gone. When I popped the hood, the
> >> > engine was really hot but like I said, today was like 90 outside. So to
> >> > sum up..
> >> >
> >> > 1. Drive on highway -- Fine.
> >> > 2. Stop and go traffic on hot day --- start to hear clicking sound
> >> > follows by clanking sound.
> >> > 3. Put car in Park the sound goes away.
> >> > 4. Pop the hood, let the engine cool for a few minutes, the sound goes
> >> > away.
> >> > 5. Recently had the Tranmission rebuilt, radiator replaced.
> >> >
> >> >
> >> > The thing is, it is hard to troubleshoot, if I take it to the repair
> >> > shop, I would have to have it making the sound but when it happens, I'm
> >> > afraid to keep on driving so I'd pull over and pop the hood to let it
> >> > cool now. I don't want to ruin whatever that is making that clanking
> >> > sound.
> >> > Also, the car has a strong hum sound, like ummmmmmmmmmm sound, could be
> >> > from the exhaust system, not sure if it's related.
> >> >
> >> > Any suggestion help , idea is really apreciated.
> >> >
> >> > -J.
> >> >
> >
#124
Guest
Posts: n/a
Re: clanking sound that driving me nuts.
Thanks.
Well, when I had my radiator done, the guy said I should get a flush.
Would it make sense to reason that the transmission is not getting
cooled sufficiently causing the clanking (read my post and responses).
A radiator cooling system flush will/probably help? I am tired of
taking it to the guy and he's giving me the "see no evil, hear no evil"
treating. What noise? I don't hear any noise.
*sigh*
c wrote:
> The inside of a torque converter looks like 2 fan blades really close
> together. One is spinning when the engine is turning, and the other spins
> when the fluid "spins" from the first fan. This is what moves the vehicle.
> The torque converter locks up when the computer detects that the
> transmission is in overdrive and the load on the engine and throttle opening
> indicate that the vehicle is "cruising". The converter has a clutch in it
> which is activated when the computer energizes a switch in the transmission.
> Basically what this does is makes the converter a direct drive, much like
> releasing the clutch pedal on a manual transmission. It all but eliminates
> any slippage in the converter. The benefits are less heat in the
> transmission fluid, lower engine RPM under cruise conditions and usually
> better fuel economy. By design, the slippage is usually between 5 and 10%.
>
> Chris
>
> <lilgrasshopper@gmail.com> wrote in message
> news:1154438425.966235.243070@i3g2000cwc.googlegro ups.com...
> >I took it to the transmission guy and he was like, hey, I took it for a
> > ride, did not hear the sound. Have a nice day. So I told him, man, it
> > only gets hot in stop and go traffic.
> >
> > What do you mean when you said "the torq converter locks up" ??
> >
> > -John
> > PeoplePC news Server wrote:
> >> Dude, my 97 ZJ does the exact same thing after having my trans rebuilt.
> >> Only
> >> does it when it is hot out, long slow moving traffic or slow moving on
> >> the
> >> trails. It got so bad once it sounded like a bolt wizzing and gringing
> >> around the scatter shield between the trans and engine block so I shut
> >> her
> >> down, removed the access panel to see if the guy forgot to tighten up a
> >> torq
> >> converter bolt, but nothing was lose or missing..?? I let it cool for
> >> about
> >> an hour, started her up and all was fine..?? Over the months I noticed
> >> the
> >> clanking will go away once the torq converter locks up, I even have the
> >> sound on video as I record allot of our trail rides with a bumper cam,
> >> showed it to the dude that rebuilt my trans (from Mr Transmission) and he
> >> swears that sound could not be comming from the transmission... But it IS
> >> comming from the transmission, so I will prolly have to eat another
> >> rebuild
> >> sooner or later cuz of that noise..
> >>
> >> Now, I do have close to 100K miles on that rebuild though, I change my
> >> fluid
> >> and filter every 30K - 40K miles as I am terrably rough on her, and can
> >> drive 400 miles in a bad week for my job while rolling 32" mud tires,
> >> factory gearing and a 4" lift. Very embarrassing to pass other trail
> >> riders
> >> as I am sure they think it is a rod knocking, my clanking will get so bad
> >> it
> >> WILL make the noise in N or park, the olny cure I have found is to either
> >> stop and let her cool down or drive maybe 30 miles on the highway so the
> >> torq converter will lock then it will cool down on it's own and stop the
> >> noise. I had the trans guy put an external trans cooler with a rather
> >> large
> >> fan on it right after I 1st noticed the clanking sound, did not help but
> >> I
> >> am sure it did not hurt either..
> >>
> >> Jerry..
> >>
> >> <lilgrasshopper@gmail.com> wrote in message
> >> news:1153710466.306465.198680@p79g2000cwp.googlegr oups.com...
> >> > Hi all,
> >> >
> >> > I have a 1995 Jeep Grand Cherokee from hell.
> >> >
> >> > I recently had the transmisson rebuilt. (It was not engaging). I also
> >> > had the radiator replaced. Because the engine was reving and the
> >> > transmission was not engaging, it blew the radiator.
> >> >
> >> > Now:
> >> >
> >> > I can drive on the highway all day and nothing bad will happen but once
> >> > I get into stop and go traffic, like today, on a hot day, I would start
> >> > to hear some clanking, then it would get louder, like something
> >> > spinning and hitting something else. If I press on the gas pedal to go
> >> > faster, the clanking sound would be faster, more frequent so I am
> >> > thinking it has something to do with something spinning while I press
> >> > on the gas pedal (yeah, really car smart there, lol), if I put it Park,
> >> > the sound goes away but if I put it in drive to start driving, it would
> >> > make the clanking sound, hard to explain the sound, like a fan is
> >> > running and you stick a pencil into it...I think. Now, the thing is, if
> >> > I pull the car over, pop the hood, wait like 10 mins, snap the hood,
> >> > and start driving, the sound is gone. When I popped the hood, the
> >> > engine was really hot but like I said, today was like 90 outside. So to
> >> > sum up..
> >> >
> >> > 1. Drive on highway -- Fine.
> >> > 2. Stop and go traffic on hot day --- start to hear clicking sound
> >> > follows by clanking sound.
> >> > 3. Put car in Park the sound goes away.
> >> > 4. Pop the hood, let the engine cool for a few minutes, the sound goes
> >> > away.
> >> > 5. Recently had the Tranmission rebuilt, radiator replaced.
> >> >
> >> >
> >> > The thing is, it is hard to troubleshoot, if I take it to the repair
> >> > shop, I would have to have it making the sound but when it happens, I'm
> >> > afraid to keep on driving so I'd pull over and pop the hood to let it
> >> > cool now. I don't want to ruin whatever that is making that clanking
> >> > sound.
> >> > Also, the car has a strong hum sound, like ummmmmmmmmmm sound, could be
> >> > from the exhaust system, not sure if it's related.
> >> >
> >> > Any suggestion help , idea is really apreciated.
> >> >
> >> > -J.
> >> >
> >
Well, when I had my radiator done, the guy said I should get a flush.
Would it make sense to reason that the transmission is not getting
cooled sufficiently causing the clanking (read my post and responses).
A radiator cooling system flush will/probably help? I am tired of
taking it to the guy and he's giving me the "see no evil, hear no evil"
treating. What noise? I don't hear any noise.
*sigh*
c wrote:
> The inside of a torque converter looks like 2 fan blades really close
> together. One is spinning when the engine is turning, and the other spins
> when the fluid "spins" from the first fan. This is what moves the vehicle.
> The torque converter locks up when the computer detects that the
> transmission is in overdrive and the load on the engine and throttle opening
> indicate that the vehicle is "cruising". The converter has a clutch in it
> which is activated when the computer energizes a switch in the transmission.
> Basically what this does is makes the converter a direct drive, much like
> releasing the clutch pedal on a manual transmission. It all but eliminates
> any slippage in the converter. The benefits are less heat in the
> transmission fluid, lower engine RPM under cruise conditions and usually
> better fuel economy. By design, the slippage is usually between 5 and 10%.
>
> Chris
>
> <lilgrasshopper@gmail.com> wrote in message
> news:1154438425.966235.243070@i3g2000cwc.googlegro ups.com...
> >I took it to the transmission guy and he was like, hey, I took it for a
> > ride, did not hear the sound. Have a nice day. So I told him, man, it
> > only gets hot in stop and go traffic.
> >
> > What do you mean when you said "the torq converter locks up" ??
> >
> > -John
> > PeoplePC news Server wrote:
> >> Dude, my 97 ZJ does the exact same thing after having my trans rebuilt.
> >> Only
> >> does it when it is hot out, long slow moving traffic or slow moving on
> >> the
> >> trails. It got so bad once it sounded like a bolt wizzing and gringing
> >> around the scatter shield between the trans and engine block so I shut
> >> her
> >> down, removed the access panel to see if the guy forgot to tighten up a
> >> torq
> >> converter bolt, but nothing was lose or missing..?? I let it cool for
> >> about
> >> an hour, started her up and all was fine..?? Over the months I noticed
> >> the
> >> clanking will go away once the torq converter locks up, I even have the
> >> sound on video as I record allot of our trail rides with a bumper cam,
> >> showed it to the dude that rebuilt my trans (from Mr Transmission) and he
> >> swears that sound could not be comming from the transmission... But it IS
> >> comming from the transmission, so I will prolly have to eat another
> >> rebuild
> >> sooner or later cuz of that noise..
> >>
> >> Now, I do have close to 100K miles on that rebuild though, I change my
> >> fluid
> >> and filter every 30K - 40K miles as I am terrably rough on her, and can
> >> drive 400 miles in a bad week for my job while rolling 32" mud tires,
> >> factory gearing and a 4" lift. Very embarrassing to pass other trail
> >> riders
> >> as I am sure they think it is a rod knocking, my clanking will get so bad
> >> it
> >> WILL make the noise in N or park, the olny cure I have found is to either
> >> stop and let her cool down or drive maybe 30 miles on the highway so the
> >> torq converter will lock then it will cool down on it's own and stop the
> >> noise. I had the trans guy put an external trans cooler with a rather
> >> large
> >> fan on it right after I 1st noticed the clanking sound, did not help but
> >> I
> >> am sure it did not hurt either..
> >>
> >> Jerry..
> >>
> >> <lilgrasshopper@gmail.com> wrote in message
> >> news:1153710466.306465.198680@p79g2000cwp.googlegr oups.com...
> >> > Hi all,
> >> >
> >> > I have a 1995 Jeep Grand Cherokee from hell.
> >> >
> >> > I recently had the transmisson rebuilt. (It was not engaging). I also
> >> > had the radiator replaced. Because the engine was reving and the
> >> > transmission was not engaging, it blew the radiator.
> >> >
> >> > Now:
> >> >
> >> > I can drive on the highway all day and nothing bad will happen but once
> >> > I get into stop and go traffic, like today, on a hot day, I would start
> >> > to hear some clanking, then it would get louder, like something
> >> > spinning and hitting something else. If I press on the gas pedal to go
> >> > faster, the clanking sound would be faster, more frequent so I am
> >> > thinking it has something to do with something spinning while I press
> >> > on the gas pedal (yeah, really car smart there, lol), if I put it Park,
> >> > the sound goes away but if I put it in drive to start driving, it would
> >> > make the clanking sound, hard to explain the sound, like a fan is
> >> > running and you stick a pencil into it...I think. Now, the thing is, if
> >> > I pull the car over, pop the hood, wait like 10 mins, snap the hood,
> >> > and start driving, the sound is gone. When I popped the hood, the
> >> > engine was really hot but like I said, today was like 90 outside. So to
> >> > sum up..
> >> >
> >> > 1. Drive on highway -- Fine.
> >> > 2. Stop and go traffic on hot day --- start to hear clicking sound
> >> > follows by clanking sound.
> >> > 3. Put car in Park the sound goes away.
> >> > 4. Pop the hood, let the engine cool for a few minutes, the sound goes
> >> > away.
> >> > 5. Recently had the Tranmission rebuilt, radiator replaced.
> >> >
> >> >
> >> > The thing is, it is hard to troubleshoot, if I take it to the repair
> >> > shop, I would have to have it making the sound but when it happens, I'm
> >> > afraid to keep on driving so I'd pull over and pop the hood to let it
> >> > cool now. I don't want to ruin whatever that is making that clanking
> >> > sound.
> >> > Also, the car has a strong hum sound, like ummmmmmmmmmm sound, could be
> >> > from the exhaust system, not sure if it's related.
> >> >
> >> > Any suggestion help , idea is really apreciated.
> >> >
> >> > -J.
> >> >
> >
#125
Guest
Posts: n/a
Re: clanking sound that driving me nuts.
Thanks.
Well, when I had my radiator done, the guy said I should get a flush.
Would it make sense to reason that the transmission is not getting
cooled sufficiently causing the clanking (read my post and responses).
A radiator cooling system flush will/probably help? I am tired of
taking it to the guy and he's giving me the "see no evil, hear no evil"
treating. What noise? I don't hear any noise.
*sigh*
c wrote:
> The inside of a torque converter looks like 2 fan blades really close
> together. One is spinning when the engine is turning, and the other spins
> when the fluid "spins" from the first fan. This is what moves the vehicle.
> The torque converter locks up when the computer detects that the
> transmission is in overdrive and the load on the engine and throttle opening
> indicate that the vehicle is "cruising". The converter has a clutch in it
> which is activated when the computer energizes a switch in the transmission.
> Basically what this does is makes the converter a direct drive, much like
> releasing the clutch pedal on a manual transmission. It all but eliminates
> any slippage in the converter. The benefits are less heat in the
> transmission fluid, lower engine RPM under cruise conditions and usually
> better fuel economy. By design, the slippage is usually between 5 and 10%.
>
> Chris
>
> <lilgrasshopper@gmail.com> wrote in message
> news:1154438425.966235.243070@i3g2000cwc.googlegro ups.com...
> >I took it to the transmission guy and he was like, hey, I took it for a
> > ride, did not hear the sound. Have a nice day. So I told him, man, it
> > only gets hot in stop and go traffic.
> >
> > What do you mean when you said "the torq converter locks up" ??
> >
> > -John
> > PeoplePC news Server wrote:
> >> Dude, my 97 ZJ does the exact same thing after having my trans rebuilt.
> >> Only
> >> does it when it is hot out, long slow moving traffic or slow moving on
> >> the
> >> trails. It got so bad once it sounded like a bolt wizzing and gringing
> >> around the scatter shield between the trans and engine block so I shut
> >> her
> >> down, removed the access panel to see if the guy forgot to tighten up a
> >> torq
> >> converter bolt, but nothing was lose or missing..?? I let it cool for
> >> about
> >> an hour, started her up and all was fine..?? Over the months I noticed
> >> the
> >> clanking will go away once the torq converter locks up, I even have the
> >> sound on video as I record allot of our trail rides with a bumper cam,
> >> showed it to the dude that rebuilt my trans (from Mr Transmission) and he
> >> swears that sound could not be comming from the transmission... But it IS
> >> comming from the transmission, so I will prolly have to eat another
> >> rebuild
> >> sooner or later cuz of that noise..
> >>
> >> Now, I do have close to 100K miles on that rebuild though, I change my
> >> fluid
> >> and filter every 30K - 40K miles as I am terrably rough on her, and can
> >> drive 400 miles in a bad week for my job while rolling 32" mud tires,
> >> factory gearing and a 4" lift. Very embarrassing to pass other trail
> >> riders
> >> as I am sure they think it is a rod knocking, my clanking will get so bad
> >> it
> >> WILL make the noise in N or park, the olny cure I have found is to either
> >> stop and let her cool down or drive maybe 30 miles on the highway so the
> >> torq converter will lock then it will cool down on it's own and stop the
> >> noise. I had the trans guy put an external trans cooler with a rather
> >> large
> >> fan on it right after I 1st noticed the clanking sound, did not help but
> >> I
> >> am sure it did not hurt either..
> >>
> >> Jerry..
> >>
> >> <lilgrasshopper@gmail.com> wrote in message
> >> news:1153710466.306465.198680@p79g2000cwp.googlegr oups.com...
> >> > Hi all,
> >> >
> >> > I have a 1995 Jeep Grand Cherokee from hell.
> >> >
> >> > I recently had the transmisson rebuilt. (It was not engaging). I also
> >> > had the radiator replaced. Because the engine was reving and the
> >> > transmission was not engaging, it blew the radiator.
> >> >
> >> > Now:
> >> >
> >> > I can drive on the highway all day and nothing bad will happen but once
> >> > I get into stop and go traffic, like today, on a hot day, I would start
> >> > to hear some clanking, then it would get louder, like something
> >> > spinning and hitting something else. If I press on the gas pedal to go
> >> > faster, the clanking sound would be faster, more frequent so I am
> >> > thinking it has something to do with something spinning while I press
> >> > on the gas pedal (yeah, really car smart there, lol), if I put it Park,
> >> > the sound goes away but if I put it in drive to start driving, it would
> >> > make the clanking sound, hard to explain the sound, like a fan is
> >> > running and you stick a pencil into it...I think. Now, the thing is, if
> >> > I pull the car over, pop the hood, wait like 10 mins, snap the hood,
> >> > and start driving, the sound is gone. When I popped the hood, the
> >> > engine was really hot but like I said, today was like 90 outside. So to
> >> > sum up..
> >> >
> >> > 1. Drive on highway -- Fine.
> >> > 2. Stop and go traffic on hot day --- start to hear clicking sound
> >> > follows by clanking sound.
> >> > 3. Put car in Park the sound goes away.
> >> > 4. Pop the hood, let the engine cool for a few minutes, the sound goes
> >> > away.
> >> > 5. Recently had the Tranmission rebuilt, radiator replaced.
> >> >
> >> >
> >> > The thing is, it is hard to troubleshoot, if I take it to the repair
> >> > shop, I would have to have it making the sound but when it happens, I'm
> >> > afraid to keep on driving so I'd pull over and pop the hood to let it
> >> > cool now. I don't want to ruin whatever that is making that clanking
> >> > sound.
> >> > Also, the car has a strong hum sound, like ummmmmmmmmmm sound, could be
> >> > from the exhaust system, not sure if it's related.
> >> >
> >> > Any suggestion help , idea is really apreciated.
> >> >
> >> > -J.
> >> >
> >
Well, when I had my radiator done, the guy said I should get a flush.
Would it make sense to reason that the transmission is not getting
cooled sufficiently causing the clanking (read my post and responses).
A radiator cooling system flush will/probably help? I am tired of
taking it to the guy and he's giving me the "see no evil, hear no evil"
treating. What noise? I don't hear any noise.
*sigh*
c wrote:
> The inside of a torque converter looks like 2 fan blades really close
> together. One is spinning when the engine is turning, and the other spins
> when the fluid "spins" from the first fan. This is what moves the vehicle.
> The torque converter locks up when the computer detects that the
> transmission is in overdrive and the load on the engine and throttle opening
> indicate that the vehicle is "cruising". The converter has a clutch in it
> which is activated when the computer energizes a switch in the transmission.
> Basically what this does is makes the converter a direct drive, much like
> releasing the clutch pedal on a manual transmission. It all but eliminates
> any slippage in the converter. The benefits are less heat in the
> transmission fluid, lower engine RPM under cruise conditions and usually
> better fuel economy. By design, the slippage is usually between 5 and 10%.
>
> Chris
>
> <lilgrasshopper@gmail.com> wrote in message
> news:1154438425.966235.243070@i3g2000cwc.googlegro ups.com...
> >I took it to the transmission guy and he was like, hey, I took it for a
> > ride, did not hear the sound. Have a nice day. So I told him, man, it
> > only gets hot in stop and go traffic.
> >
> > What do you mean when you said "the torq converter locks up" ??
> >
> > -John
> > PeoplePC news Server wrote:
> >> Dude, my 97 ZJ does the exact same thing after having my trans rebuilt.
> >> Only
> >> does it when it is hot out, long slow moving traffic or slow moving on
> >> the
> >> trails. It got so bad once it sounded like a bolt wizzing and gringing
> >> around the scatter shield between the trans and engine block so I shut
> >> her
> >> down, removed the access panel to see if the guy forgot to tighten up a
> >> torq
> >> converter bolt, but nothing was lose or missing..?? I let it cool for
> >> about
> >> an hour, started her up and all was fine..?? Over the months I noticed
> >> the
> >> clanking will go away once the torq converter locks up, I even have the
> >> sound on video as I record allot of our trail rides with a bumper cam,
> >> showed it to the dude that rebuilt my trans (from Mr Transmission) and he
> >> swears that sound could not be comming from the transmission... But it IS
> >> comming from the transmission, so I will prolly have to eat another
> >> rebuild
> >> sooner or later cuz of that noise..
> >>
> >> Now, I do have close to 100K miles on that rebuild though, I change my
> >> fluid
> >> and filter every 30K - 40K miles as I am terrably rough on her, and can
> >> drive 400 miles in a bad week for my job while rolling 32" mud tires,
> >> factory gearing and a 4" lift. Very embarrassing to pass other trail
> >> riders
> >> as I am sure they think it is a rod knocking, my clanking will get so bad
> >> it
> >> WILL make the noise in N or park, the olny cure I have found is to either
> >> stop and let her cool down or drive maybe 30 miles on the highway so the
> >> torq converter will lock then it will cool down on it's own and stop the
> >> noise. I had the trans guy put an external trans cooler with a rather
> >> large
> >> fan on it right after I 1st noticed the clanking sound, did not help but
> >> I
> >> am sure it did not hurt either..
> >>
> >> Jerry..
> >>
> >> <lilgrasshopper@gmail.com> wrote in message
> >> news:1153710466.306465.198680@p79g2000cwp.googlegr oups.com...
> >> > Hi all,
> >> >
> >> > I have a 1995 Jeep Grand Cherokee from hell.
> >> >
> >> > I recently had the transmisson rebuilt. (It was not engaging). I also
> >> > had the radiator replaced. Because the engine was reving and the
> >> > transmission was not engaging, it blew the radiator.
> >> >
> >> > Now:
> >> >
> >> > I can drive on the highway all day and nothing bad will happen but once
> >> > I get into stop and go traffic, like today, on a hot day, I would start
> >> > to hear some clanking, then it would get louder, like something
> >> > spinning and hitting something else. If I press on the gas pedal to go
> >> > faster, the clanking sound would be faster, more frequent so I am
> >> > thinking it has something to do with something spinning while I press
> >> > on the gas pedal (yeah, really car smart there, lol), if I put it Park,
> >> > the sound goes away but if I put it in drive to start driving, it would
> >> > make the clanking sound, hard to explain the sound, like a fan is
> >> > running and you stick a pencil into it...I think. Now, the thing is, if
> >> > I pull the car over, pop the hood, wait like 10 mins, snap the hood,
> >> > and start driving, the sound is gone. When I popped the hood, the
> >> > engine was really hot but like I said, today was like 90 outside. So to
> >> > sum up..
> >> >
> >> > 1. Drive on highway -- Fine.
> >> > 2. Stop and go traffic on hot day --- start to hear clicking sound
> >> > follows by clanking sound.
> >> > 3. Put car in Park the sound goes away.
> >> > 4. Pop the hood, let the engine cool for a few minutes, the sound goes
> >> > away.
> >> > 5. Recently had the Tranmission rebuilt, radiator replaced.
> >> >
> >> >
> >> > The thing is, it is hard to troubleshoot, if I take it to the repair
> >> > shop, I would have to have it making the sound but when it happens, I'm
> >> > afraid to keep on driving so I'd pull over and pop the hood to let it
> >> > cool now. I don't want to ruin whatever that is making that clanking
> >> > sound.
> >> > Also, the car has a strong hum sound, like ummmmmmmmmmm sound, could be
> >> > from the exhaust system, not sure if it's related.
> >> >
> >> > Any suggestion help , idea is really apreciated.
> >> >
> >> > -J.
> >> >
> >
#126
Guest
Posts: n/a
Re: clanking sound that driving me nuts.
Insufficient transmission cooling will usually manifest as burnt, smelly
fluid, slipping and finally outright failure. Clanking is not a common sign
of this, but it certainly won't hurt to flush your cooling system. Lots of
"auto repair technicians" will suggest cooling system flush, oil change,
rotate tires, etc. when they don't know what else to do, however.
Earle
<lilgrasshopper@gmail.com> wrote in message
news:1154448954.714748.42300@m79g2000cwm.googlegro ups.com...
> Thanks.
>
> Well, when I had my radiator done, the guy said I should get a flush.
> Would it make sense to reason that the transmission is not getting
> cooled sufficiently causing the clanking (read my post and responses).
> A radiator cooling system flush will/probably help? I am tired of
> taking it to the guy and he's giving me the "see no evil, hear no evil"
> treating. What noise? I don't hear any noise.
>
> *sigh*
> c wrote:
> > The inside of a torque converter looks like 2 fan blades really close
> > together. One is spinning when the engine is turning, and the other
spins
> > when the fluid "spins" from the first fan. This is what moves the
vehicle.
> > The torque converter locks up when the computer detects that the
> > transmission is in overdrive and the load on the engine and throttle
opening
> > indicate that the vehicle is "cruising". The converter has a clutch in
it
> > which is activated when the computer energizes a switch in the
transmission.
> > Basically what this does is makes the converter a direct drive, much
like
> > releasing the clutch pedal on a manual transmission. It all but
eliminates
> > any slippage in the converter. The benefits are less heat in the
> > transmission fluid, lower engine RPM under cruise conditions and usually
> > better fuel economy. By design, the slippage is usually between 5 and
10%.
> >
> > Chris
> >
> > <lilgrasshopper@gmail.com> wrote in message
> > news:1154438425.966235.243070@i3g2000cwc.googlegro ups.com...
> > >I took it to the transmission guy and he was like, hey, I took it for a
> > > ride, did not hear the sound. Have a nice day. So I told him, man, it
> > > only gets hot in stop and go traffic.
> > >
> > > What do you mean when you said "the torq converter locks up" ??
> > >
> > > -John
> > > PeoplePC news Server wrote:
> > >> Dude, my 97 ZJ does the exact same thing after having my trans
rebuilt.
> > >> Only
> > >> does it when it is hot out, long slow moving traffic or slow moving
on
> > >> the
> > >> trails. It got so bad once it sounded like a bolt wizzing and
gringing
> > >> around the scatter shield between the trans and engine block so I
shut
> > >> her
> > >> down, removed the access panel to see if the guy forgot to tighten up
a
> > >> torq
> > >> converter bolt, but nothing was lose or missing..?? I let it cool for
> > >> about
> > >> an hour, started her up and all was fine..?? Over the months I
noticed
> > >> the
> > >> clanking will go away once the torq converter locks up, I even have
the
> > >> sound on video as I record allot of our trail rides with a bumper
cam,
> > >> showed it to the dude that rebuilt my trans (from Mr Transmission)
and he
> > >> swears that sound could not be comming from the transmission... But
it IS
> > >> comming from the transmission, so I will prolly have to eat another
> > >> rebuild
> > >> sooner or later cuz of that noise..
> > >>
> > >> Now, I do have close to 100K miles on that rebuild though, I change
my
> > >> fluid
> > >> and filter every 30K - 40K miles as I am terrably rough on her, and
can
> > >> drive 400 miles in a bad week for my job while rolling 32" mud tires,
> > >> factory gearing and a 4" lift. Very embarrassing to pass other trail
> > >> riders
> > >> as I am sure they think it is a rod knocking, my clanking will get so
bad
> > >> it
> > >> WILL make the noise in N or park, the olny cure I have found is to
either
> > >> stop and let her cool down or drive maybe 30 miles on the highway so
the
> > >> torq converter will lock then it will cool down on it's own and stop
the
> > >> noise. I had the trans guy put an external trans cooler with a rather
> > >> large
> > >> fan on it right after I 1st noticed the clanking sound, did not help
but
> > >> I
> > >> am sure it did not hurt either..
> > >>
> > >> Jerry..
> > >>
> > >> <lilgrasshopper@gmail.com> wrote in message
> > >> news:1153710466.306465.198680@p79g2000cwp.googlegr oups.com...
> > >> > Hi all,
> > >> >
> > >> > I have a 1995 Jeep Grand Cherokee from hell.
> > >> >
> > >> > I recently had the transmisson rebuilt. (It was not engaging). I
also
> > >> > had the radiator replaced. Because the engine was reving and the
> > >> > transmission was not engaging, it blew the radiator.
> > >> >
> > >> > Now:
> > >> >
> > >> > I can drive on the highway all day and nothing bad will happen but
once
> > >> > I get into stop and go traffic, like today, on a hot day, I would
start
> > >> > to hear some clanking, then it would get louder, like something
> > >> > spinning and hitting something else. If I press on the gas pedal to
go
> > >> > faster, the clanking sound would be faster, more frequent so I am
> > >> > thinking it has something to do with something spinning while I
press
> > >> > on the gas pedal (yeah, really car smart there, lol), if I put it
Park,
> > >> > the sound goes away but if I put it in drive to start driving, it
would
> > >> > make the clanking sound, hard to explain the sound, like a fan is
> > >> > running and you stick a pencil into it...I think. Now, the thing
is, if
> > >> > I pull the car over, pop the hood, wait like 10 mins, snap the
hood,
> > >> > and start driving, the sound is gone. When I popped the hood, the
> > >> > engine was really hot but like I said, today was like 90 outside.
So to
> > >> > sum up..
> > >> >
> > >> > 1. Drive on highway -- Fine.
> > >> > 2. Stop and go traffic on hot day --- start to hear clicking sound
> > >> > follows by clanking sound.
> > >> > 3. Put car in Park the sound goes away.
> > >> > 4. Pop the hood, let the engine cool for a few minutes, the sound
goes
> > >> > away.
> > >> > 5. Recently had the Tranmission rebuilt, radiator replaced.
> > >> >
> > >> >
> > >> > The thing is, it is hard to troubleshoot, if I take it to the
repair
> > >> > shop, I would have to have it making the sound but when it happens,
I'm
> > >> > afraid to keep on driving so I'd pull over and pop the hood to let
it
> > >> > cool now. I don't want to ruin whatever that is making that
clanking
> > >> > sound.
> > >> > Also, the car has a strong hum sound, like ummmmmmmmmmm sound,
could be
> > >> > from the exhaust system, not sure if it's related.
> > >> >
> > >> > Any suggestion help , idea is really apreciated.
> > >> >
> > >> > -J.
> > >> >
> > >
>
fluid, slipping and finally outright failure. Clanking is not a common sign
of this, but it certainly won't hurt to flush your cooling system. Lots of
"auto repair technicians" will suggest cooling system flush, oil change,
rotate tires, etc. when they don't know what else to do, however.
Earle
<lilgrasshopper@gmail.com> wrote in message
news:1154448954.714748.42300@m79g2000cwm.googlegro ups.com...
> Thanks.
>
> Well, when I had my radiator done, the guy said I should get a flush.
> Would it make sense to reason that the transmission is not getting
> cooled sufficiently causing the clanking (read my post and responses).
> A radiator cooling system flush will/probably help? I am tired of
> taking it to the guy and he's giving me the "see no evil, hear no evil"
> treating. What noise? I don't hear any noise.
>
> *sigh*
> c wrote:
> > The inside of a torque converter looks like 2 fan blades really close
> > together. One is spinning when the engine is turning, and the other
spins
> > when the fluid "spins" from the first fan. This is what moves the
vehicle.
> > The torque converter locks up when the computer detects that the
> > transmission is in overdrive and the load on the engine and throttle
opening
> > indicate that the vehicle is "cruising". The converter has a clutch in
it
> > which is activated when the computer energizes a switch in the
transmission.
> > Basically what this does is makes the converter a direct drive, much
like
> > releasing the clutch pedal on a manual transmission. It all but
eliminates
> > any slippage in the converter. The benefits are less heat in the
> > transmission fluid, lower engine RPM under cruise conditions and usually
> > better fuel economy. By design, the slippage is usually between 5 and
10%.
> >
> > Chris
> >
> > <lilgrasshopper@gmail.com> wrote in message
> > news:1154438425.966235.243070@i3g2000cwc.googlegro ups.com...
> > >I took it to the transmission guy and he was like, hey, I took it for a
> > > ride, did not hear the sound. Have a nice day. So I told him, man, it
> > > only gets hot in stop and go traffic.
> > >
> > > What do you mean when you said "the torq converter locks up" ??
> > >
> > > -John
> > > PeoplePC news Server wrote:
> > >> Dude, my 97 ZJ does the exact same thing after having my trans
rebuilt.
> > >> Only
> > >> does it when it is hot out, long slow moving traffic or slow moving
on
> > >> the
> > >> trails. It got so bad once it sounded like a bolt wizzing and
gringing
> > >> around the scatter shield between the trans and engine block so I
shut
> > >> her
> > >> down, removed the access panel to see if the guy forgot to tighten up
a
> > >> torq
> > >> converter bolt, but nothing was lose or missing..?? I let it cool for
> > >> about
> > >> an hour, started her up and all was fine..?? Over the months I
noticed
> > >> the
> > >> clanking will go away once the torq converter locks up, I even have
the
> > >> sound on video as I record allot of our trail rides with a bumper
cam,
> > >> showed it to the dude that rebuilt my trans (from Mr Transmission)
and he
> > >> swears that sound could not be comming from the transmission... But
it IS
> > >> comming from the transmission, so I will prolly have to eat another
> > >> rebuild
> > >> sooner or later cuz of that noise..
> > >>
> > >> Now, I do have close to 100K miles on that rebuild though, I change
my
> > >> fluid
> > >> and filter every 30K - 40K miles as I am terrably rough on her, and
can
> > >> drive 400 miles in a bad week for my job while rolling 32" mud tires,
> > >> factory gearing and a 4" lift. Very embarrassing to pass other trail
> > >> riders
> > >> as I am sure they think it is a rod knocking, my clanking will get so
bad
> > >> it
> > >> WILL make the noise in N or park, the olny cure I have found is to
either
> > >> stop and let her cool down or drive maybe 30 miles on the highway so
the
> > >> torq converter will lock then it will cool down on it's own and stop
the
> > >> noise. I had the trans guy put an external trans cooler with a rather
> > >> large
> > >> fan on it right after I 1st noticed the clanking sound, did not help
but
> > >> I
> > >> am sure it did not hurt either..
> > >>
> > >> Jerry..
> > >>
> > >> <lilgrasshopper@gmail.com> wrote in message
> > >> news:1153710466.306465.198680@p79g2000cwp.googlegr oups.com...
> > >> > Hi all,
> > >> >
> > >> > I have a 1995 Jeep Grand Cherokee from hell.
> > >> >
> > >> > I recently had the transmisson rebuilt. (It was not engaging). I
also
> > >> > had the radiator replaced. Because the engine was reving and the
> > >> > transmission was not engaging, it blew the radiator.
> > >> >
> > >> > Now:
> > >> >
> > >> > I can drive on the highway all day and nothing bad will happen but
once
> > >> > I get into stop and go traffic, like today, on a hot day, I would
start
> > >> > to hear some clanking, then it would get louder, like something
> > >> > spinning and hitting something else. If I press on the gas pedal to
go
> > >> > faster, the clanking sound would be faster, more frequent so I am
> > >> > thinking it has something to do with something spinning while I
press
> > >> > on the gas pedal (yeah, really car smart there, lol), if I put it
Park,
> > >> > the sound goes away but if I put it in drive to start driving, it
would
> > >> > make the clanking sound, hard to explain the sound, like a fan is
> > >> > running and you stick a pencil into it...I think. Now, the thing
is, if
> > >> > I pull the car over, pop the hood, wait like 10 mins, snap the
hood,
> > >> > and start driving, the sound is gone. When I popped the hood, the
> > >> > engine was really hot but like I said, today was like 90 outside.
So to
> > >> > sum up..
> > >> >
> > >> > 1. Drive on highway -- Fine.
> > >> > 2. Stop and go traffic on hot day --- start to hear clicking sound
> > >> > follows by clanking sound.
> > >> > 3. Put car in Park the sound goes away.
> > >> > 4. Pop the hood, let the engine cool for a few minutes, the sound
goes
> > >> > away.
> > >> > 5. Recently had the Tranmission rebuilt, radiator replaced.
> > >> >
> > >> >
> > >> > The thing is, it is hard to troubleshoot, if I take it to the
repair
> > >> > shop, I would have to have it making the sound but when it happens,
I'm
> > >> > afraid to keep on driving so I'd pull over and pop the hood to let
it
> > >> > cool now. I don't want to ruin whatever that is making that
clanking
> > >> > sound.
> > >> > Also, the car has a strong hum sound, like ummmmmmmmmmm sound,
could be
> > >> > from the exhaust system, not sure if it's related.
> > >> >
> > >> > Any suggestion help , idea is really apreciated.
> > >> >
> > >> > -J.
> > >> >
> > >
>
#127
Guest
Posts: n/a
Re: clanking sound that driving me nuts.
Insufficient transmission cooling will usually manifest as burnt, smelly
fluid, slipping and finally outright failure. Clanking is not a common sign
of this, but it certainly won't hurt to flush your cooling system. Lots of
"auto repair technicians" will suggest cooling system flush, oil change,
rotate tires, etc. when they don't know what else to do, however.
Earle
<lilgrasshopper@gmail.com> wrote in message
news:1154448954.714748.42300@m79g2000cwm.googlegro ups.com...
> Thanks.
>
> Well, when I had my radiator done, the guy said I should get a flush.
> Would it make sense to reason that the transmission is not getting
> cooled sufficiently causing the clanking (read my post and responses).
> A radiator cooling system flush will/probably help? I am tired of
> taking it to the guy and he's giving me the "see no evil, hear no evil"
> treating. What noise? I don't hear any noise.
>
> *sigh*
> c wrote:
> > The inside of a torque converter looks like 2 fan blades really close
> > together. One is spinning when the engine is turning, and the other
spins
> > when the fluid "spins" from the first fan. This is what moves the
vehicle.
> > The torque converter locks up when the computer detects that the
> > transmission is in overdrive and the load on the engine and throttle
opening
> > indicate that the vehicle is "cruising". The converter has a clutch in
it
> > which is activated when the computer energizes a switch in the
transmission.
> > Basically what this does is makes the converter a direct drive, much
like
> > releasing the clutch pedal on a manual transmission. It all but
eliminates
> > any slippage in the converter. The benefits are less heat in the
> > transmission fluid, lower engine RPM under cruise conditions and usually
> > better fuel economy. By design, the slippage is usually between 5 and
10%.
> >
> > Chris
> >
> > <lilgrasshopper@gmail.com> wrote in message
> > news:1154438425.966235.243070@i3g2000cwc.googlegro ups.com...
> > >I took it to the transmission guy and he was like, hey, I took it for a
> > > ride, did not hear the sound. Have a nice day. So I told him, man, it
> > > only gets hot in stop and go traffic.
> > >
> > > What do you mean when you said "the torq converter locks up" ??
> > >
> > > -John
> > > PeoplePC news Server wrote:
> > >> Dude, my 97 ZJ does the exact same thing after having my trans
rebuilt.
> > >> Only
> > >> does it when it is hot out, long slow moving traffic or slow moving
on
> > >> the
> > >> trails. It got so bad once it sounded like a bolt wizzing and
gringing
> > >> around the scatter shield between the trans and engine block so I
shut
> > >> her
> > >> down, removed the access panel to see if the guy forgot to tighten up
a
> > >> torq
> > >> converter bolt, but nothing was lose or missing..?? I let it cool for
> > >> about
> > >> an hour, started her up and all was fine..?? Over the months I
noticed
> > >> the
> > >> clanking will go away once the torq converter locks up, I even have
the
> > >> sound on video as I record allot of our trail rides with a bumper
cam,
> > >> showed it to the dude that rebuilt my trans (from Mr Transmission)
and he
> > >> swears that sound could not be comming from the transmission... But
it IS
> > >> comming from the transmission, so I will prolly have to eat another
> > >> rebuild
> > >> sooner or later cuz of that noise..
> > >>
> > >> Now, I do have close to 100K miles on that rebuild though, I change
my
> > >> fluid
> > >> and filter every 30K - 40K miles as I am terrably rough on her, and
can
> > >> drive 400 miles in a bad week for my job while rolling 32" mud tires,
> > >> factory gearing and a 4" lift. Very embarrassing to pass other trail
> > >> riders
> > >> as I am sure they think it is a rod knocking, my clanking will get so
bad
> > >> it
> > >> WILL make the noise in N or park, the olny cure I have found is to
either
> > >> stop and let her cool down or drive maybe 30 miles on the highway so
the
> > >> torq converter will lock then it will cool down on it's own and stop
the
> > >> noise. I had the trans guy put an external trans cooler with a rather
> > >> large
> > >> fan on it right after I 1st noticed the clanking sound, did not help
but
> > >> I
> > >> am sure it did not hurt either..
> > >>
> > >> Jerry..
> > >>
> > >> <lilgrasshopper@gmail.com> wrote in message
> > >> news:1153710466.306465.198680@p79g2000cwp.googlegr oups.com...
> > >> > Hi all,
> > >> >
> > >> > I have a 1995 Jeep Grand Cherokee from hell.
> > >> >
> > >> > I recently had the transmisson rebuilt. (It was not engaging). I
also
> > >> > had the radiator replaced. Because the engine was reving and the
> > >> > transmission was not engaging, it blew the radiator.
> > >> >
> > >> > Now:
> > >> >
> > >> > I can drive on the highway all day and nothing bad will happen but
once
> > >> > I get into stop and go traffic, like today, on a hot day, I would
start
> > >> > to hear some clanking, then it would get louder, like something
> > >> > spinning and hitting something else. If I press on the gas pedal to
go
> > >> > faster, the clanking sound would be faster, more frequent so I am
> > >> > thinking it has something to do with something spinning while I
press
> > >> > on the gas pedal (yeah, really car smart there, lol), if I put it
Park,
> > >> > the sound goes away but if I put it in drive to start driving, it
would
> > >> > make the clanking sound, hard to explain the sound, like a fan is
> > >> > running and you stick a pencil into it...I think. Now, the thing
is, if
> > >> > I pull the car over, pop the hood, wait like 10 mins, snap the
hood,
> > >> > and start driving, the sound is gone. When I popped the hood, the
> > >> > engine was really hot but like I said, today was like 90 outside.
So to
> > >> > sum up..
> > >> >
> > >> > 1. Drive on highway -- Fine.
> > >> > 2. Stop and go traffic on hot day --- start to hear clicking sound
> > >> > follows by clanking sound.
> > >> > 3. Put car in Park the sound goes away.
> > >> > 4. Pop the hood, let the engine cool for a few minutes, the sound
goes
> > >> > away.
> > >> > 5. Recently had the Tranmission rebuilt, radiator replaced.
> > >> >
> > >> >
> > >> > The thing is, it is hard to troubleshoot, if I take it to the
repair
> > >> > shop, I would have to have it making the sound but when it happens,
I'm
> > >> > afraid to keep on driving so I'd pull over and pop the hood to let
it
> > >> > cool now. I don't want to ruin whatever that is making that
clanking
> > >> > sound.
> > >> > Also, the car has a strong hum sound, like ummmmmmmmmmm sound,
could be
> > >> > from the exhaust system, not sure if it's related.
> > >> >
> > >> > Any suggestion help , idea is really apreciated.
> > >> >
> > >> > -J.
> > >> >
> > >
>
fluid, slipping and finally outright failure. Clanking is not a common sign
of this, but it certainly won't hurt to flush your cooling system. Lots of
"auto repair technicians" will suggest cooling system flush, oil change,
rotate tires, etc. when they don't know what else to do, however.
Earle
<lilgrasshopper@gmail.com> wrote in message
news:1154448954.714748.42300@m79g2000cwm.googlegro ups.com...
> Thanks.
>
> Well, when I had my radiator done, the guy said I should get a flush.
> Would it make sense to reason that the transmission is not getting
> cooled sufficiently causing the clanking (read my post and responses).
> A radiator cooling system flush will/probably help? I am tired of
> taking it to the guy and he's giving me the "see no evil, hear no evil"
> treating. What noise? I don't hear any noise.
>
> *sigh*
> c wrote:
> > The inside of a torque converter looks like 2 fan blades really close
> > together. One is spinning when the engine is turning, and the other
spins
> > when the fluid "spins" from the first fan. This is what moves the
vehicle.
> > The torque converter locks up when the computer detects that the
> > transmission is in overdrive and the load on the engine and throttle
opening
> > indicate that the vehicle is "cruising". The converter has a clutch in
it
> > which is activated when the computer energizes a switch in the
transmission.
> > Basically what this does is makes the converter a direct drive, much
like
> > releasing the clutch pedal on a manual transmission. It all but
eliminates
> > any slippage in the converter. The benefits are less heat in the
> > transmission fluid, lower engine RPM under cruise conditions and usually
> > better fuel economy. By design, the slippage is usually between 5 and
10%.
> >
> > Chris
> >
> > <lilgrasshopper@gmail.com> wrote in message
> > news:1154438425.966235.243070@i3g2000cwc.googlegro ups.com...
> > >I took it to the transmission guy and he was like, hey, I took it for a
> > > ride, did not hear the sound. Have a nice day. So I told him, man, it
> > > only gets hot in stop and go traffic.
> > >
> > > What do you mean when you said "the torq converter locks up" ??
> > >
> > > -John
> > > PeoplePC news Server wrote:
> > >> Dude, my 97 ZJ does the exact same thing after having my trans
rebuilt.
> > >> Only
> > >> does it when it is hot out, long slow moving traffic or slow moving
on
> > >> the
> > >> trails. It got so bad once it sounded like a bolt wizzing and
gringing
> > >> around the scatter shield between the trans and engine block so I
shut
> > >> her
> > >> down, removed the access panel to see if the guy forgot to tighten up
a
> > >> torq
> > >> converter bolt, but nothing was lose or missing..?? I let it cool for
> > >> about
> > >> an hour, started her up and all was fine..?? Over the months I
noticed
> > >> the
> > >> clanking will go away once the torq converter locks up, I even have
the
> > >> sound on video as I record allot of our trail rides with a bumper
cam,
> > >> showed it to the dude that rebuilt my trans (from Mr Transmission)
and he
> > >> swears that sound could not be comming from the transmission... But
it IS
> > >> comming from the transmission, so I will prolly have to eat another
> > >> rebuild
> > >> sooner or later cuz of that noise..
> > >>
> > >> Now, I do have close to 100K miles on that rebuild though, I change
my
> > >> fluid
> > >> and filter every 30K - 40K miles as I am terrably rough on her, and
can
> > >> drive 400 miles in a bad week for my job while rolling 32" mud tires,
> > >> factory gearing and a 4" lift. Very embarrassing to pass other trail
> > >> riders
> > >> as I am sure they think it is a rod knocking, my clanking will get so
bad
> > >> it
> > >> WILL make the noise in N or park, the olny cure I have found is to
either
> > >> stop and let her cool down or drive maybe 30 miles on the highway so
the
> > >> torq converter will lock then it will cool down on it's own and stop
the
> > >> noise. I had the trans guy put an external trans cooler with a rather
> > >> large
> > >> fan on it right after I 1st noticed the clanking sound, did not help
but
> > >> I
> > >> am sure it did not hurt either..
> > >>
> > >> Jerry..
> > >>
> > >> <lilgrasshopper@gmail.com> wrote in message
> > >> news:1153710466.306465.198680@p79g2000cwp.googlegr oups.com...
> > >> > Hi all,
> > >> >
> > >> > I have a 1995 Jeep Grand Cherokee from hell.
> > >> >
> > >> > I recently had the transmisson rebuilt. (It was not engaging). I
also
> > >> > had the radiator replaced. Because the engine was reving and the
> > >> > transmission was not engaging, it blew the radiator.
> > >> >
> > >> > Now:
> > >> >
> > >> > I can drive on the highway all day and nothing bad will happen but
once
> > >> > I get into stop and go traffic, like today, on a hot day, I would
start
> > >> > to hear some clanking, then it would get louder, like something
> > >> > spinning and hitting something else. If I press on the gas pedal to
go
> > >> > faster, the clanking sound would be faster, more frequent so I am
> > >> > thinking it has something to do with something spinning while I
press
> > >> > on the gas pedal (yeah, really car smart there, lol), if I put it
Park,
> > >> > the sound goes away but if I put it in drive to start driving, it
would
> > >> > make the clanking sound, hard to explain the sound, like a fan is
> > >> > running and you stick a pencil into it...I think. Now, the thing
is, if
> > >> > I pull the car over, pop the hood, wait like 10 mins, snap the
hood,
> > >> > and start driving, the sound is gone. When I popped the hood, the
> > >> > engine was really hot but like I said, today was like 90 outside.
So to
> > >> > sum up..
> > >> >
> > >> > 1. Drive on highway -- Fine.
> > >> > 2. Stop and go traffic on hot day --- start to hear clicking sound
> > >> > follows by clanking sound.
> > >> > 3. Put car in Park the sound goes away.
> > >> > 4. Pop the hood, let the engine cool for a few minutes, the sound
goes
> > >> > away.
> > >> > 5. Recently had the Tranmission rebuilt, radiator replaced.
> > >> >
> > >> >
> > >> > The thing is, it is hard to troubleshoot, if I take it to the
repair
> > >> > shop, I would have to have it making the sound but when it happens,
I'm
> > >> > afraid to keep on driving so I'd pull over and pop the hood to let
it
> > >> > cool now. I don't want to ruin whatever that is making that
clanking
> > >> > sound.
> > >> > Also, the car has a strong hum sound, like ummmmmmmmmmm sound,
could be
> > >> > from the exhaust system, not sure if it's related.
> > >> >
> > >> > Any suggestion help , idea is really apreciated.
> > >> >
> > >> > -J.
> > >> >
> > >
>
#128
Guest
Posts: n/a
Re: clanking sound that driving me nuts.
Insufficient transmission cooling will usually manifest as burnt, smelly
fluid, slipping and finally outright failure. Clanking is not a common sign
of this, but it certainly won't hurt to flush your cooling system. Lots of
"auto repair technicians" will suggest cooling system flush, oil change,
rotate tires, etc. when they don't know what else to do, however.
Earle
<lilgrasshopper@gmail.com> wrote in message
news:1154448954.714748.42300@m79g2000cwm.googlegro ups.com...
> Thanks.
>
> Well, when I had my radiator done, the guy said I should get a flush.
> Would it make sense to reason that the transmission is not getting
> cooled sufficiently causing the clanking (read my post and responses).
> A radiator cooling system flush will/probably help? I am tired of
> taking it to the guy and he's giving me the "see no evil, hear no evil"
> treating. What noise? I don't hear any noise.
>
> *sigh*
> c wrote:
> > The inside of a torque converter looks like 2 fan blades really close
> > together. One is spinning when the engine is turning, and the other
spins
> > when the fluid "spins" from the first fan. This is what moves the
vehicle.
> > The torque converter locks up when the computer detects that the
> > transmission is in overdrive and the load on the engine and throttle
opening
> > indicate that the vehicle is "cruising". The converter has a clutch in
it
> > which is activated when the computer energizes a switch in the
transmission.
> > Basically what this does is makes the converter a direct drive, much
like
> > releasing the clutch pedal on a manual transmission. It all but
eliminates
> > any slippage in the converter. The benefits are less heat in the
> > transmission fluid, lower engine RPM under cruise conditions and usually
> > better fuel economy. By design, the slippage is usually between 5 and
10%.
> >
> > Chris
> >
> > <lilgrasshopper@gmail.com> wrote in message
> > news:1154438425.966235.243070@i3g2000cwc.googlegro ups.com...
> > >I took it to the transmission guy and he was like, hey, I took it for a
> > > ride, did not hear the sound. Have a nice day. So I told him, man, it
> > > only gets hot in stop and go traffic.
> > >
> > > What do you mean when you said "the torq converter locks up" ??
> > >
> > > -John
> > > PeoplePC news Server wrote:
> > >> Dude, my 97 ZJ does the exact same thing after having my trans
rebuilt.
> > >> Only
> > >> does it when it is hot out, long slow moving traffic or slow moving
on
> > >> the
> > >> trails. It got so bad once it sounded like a bolt wizzing and
gringing
> > >> around the scatter shield between the trans and engine block so I
shut
> > >> her
> > >> down, removed the access panel to see if the guy forgot to tighten up
a
> > >> torq
> > >> converter bolt, but nothing was lose or missing..?? I let it cool for
> > >> about
> > >> an hour, started her up and all was fine..?? Over the months I
noticed
> > >> the
> > >> clanking will go away once the torq converter locks up, I even have
the
> > >> sound on video as I record allot of our trail rides with a bumper
cam,
> > >> showed it to the dude that rebuilt my trans (from Mr Transmission)
and he
> > >> swears that sound could not be comming from the transmission... But
it IS
> > >> comming from the transmission, so I will prolly have to eat another
> > >> rebuild
> > >> sooner or later cuz of that noise..
> > >>
> > >> Now, I do have close to 100K miles on that rebuild though, I change
my
> > >> fluid
> > >> and filter every 30K - 40K miles as I am terrably rough on her, and
can
> > >> drive 400 miles in a bad week for my job while rolling 32" mud tires,
> > >> factory gearing and a 4" lift. Very embarrassing to pass other trail
> > >> riders
> > >> as I am sure they think it is a rod knocking, my clanking will get so
bad
> > >> it
> > >> WILL make the noise in N or park, the olny cure I have found is to
either
> > >> stop and let her cool down or drive maybe 30 miles on the highway so
the
> > >> torq converter will lock then it will cool down on it's own and stop
the
> > >> noise. I had the trans guy put an external trans cooler with a rather
> > >> large
> > >> fan on it right after I 1st noticed the clanking sound, did not help
but
> > >> I
> > >> am sure it did not hurt either..
> > >>
> > >> Jerry..
> > >>
> > >> <lilgrasshopper@gmail.com> wrote in message
> > >> news:1153710466.306465.198680@p79g2000cwp.googlegr oups.com...
> > >> > Hi all,
> > >> >
> > >> > I have a 1995 Jeep Grand Cherokee from hell.
> > >> >
> > >> > I recently had the transmisson rebuilt. (It was not engaging). I
also
> > >> > had the radiator replaced. Because the engine was reving and the
> > >> > transmission was not engaging, it blew the radiator.
> > >> >
> > >> > Now:
> > >> >
> > >> > I can drive on the highway all day and nothing bad will happen but
once
> > >> > I get into stop and go traffic, like today, on a hot day, I would
start
> > >> > to hear some clanking, then it would get louder, like something
> > >> > spinning and hitting something else. If I press on the gas pedal to
go
> > >> > faster, the clanking sound would be faster, more frequent so I am
> > >> > thinking it has something to do with something spinning while I
press
> > >> > on the gas pedal (yeah, really car smart there, lol), if I put it
Park,
> > >> > the sound goes away but if I put it in drive to start driving, it
would
> > >> > make the clanking sound, hard to explain the sound, like a fan is
> > >> > running and you stick a pencil into it...I think. Now, the thing
is, if
> > >> > I pull the car over, pop the hood, wait like 10 mins, snap the
hood,
> > >> > and start driving, the sound is gone. When I popped the hood, the
> > >> > engine was really hot but like I said, today was like 90 outside.
So to
> > >> > sum up..
> > >> >
> > >> > 1. Drive on highway -- Fine.
> > >> > 2. Stop and go traffic on hot day --- start to hear clicking sound
> > >> > follows by clanking sound.
> > >> > 3. Put car in Park the sound goes away.
> > >> > 4. Pop the hood, let the engine cool for a few minutes, the sound
goes
> > >> > away.
> > >> > 5. Recently had the Tranmission rebuilt, radiator replaced.
> > >> >
> > >> >
> > >> > The thing is, it is hard to troubleshoot, if I take it to the
repair
> > >> > shop, I would have to have it making the sound but when it happens,
I'm
> > >> > afraid to keep on driving so I'd pull over and pop the hood to let
it
> > >> > cool now. I don't want to ruin whatever that is making that
clanking
> > >> > sound.
> > >> > Also, the car has a strong hum sound, like ummmmmmmmmmm sound,
could be
> > >> > from the exhaust system, not sure if it's related.
> > >> >
> > >> > Any suggestion help , idea is really apreciated.
> > >> >
> > >> > -J.
> > >> >
> > >
>
fluid, slipping and finally outright failure. Clanking is not a common sign
of this, but it certainly won't hurt to flush your cooling system. Lots of
"auto repair technicians" will suggest cooling system flush, oil change,
rotate tires, etc. when they don't know what else to do, however.
Earle
<lilgrasshopper@gmail.com> wrote in message
news:1154448954.714748.42300@m79g2000cwm.googlegro ups.com...
> Thanks.
>
> Well, when I had my radiator done, the guy said I should get a flush.
> Would it make sense to reason that the transmission is not getting
> cooled sufficiently causing the clanking (read my post and responses).
> A radiator cooling system flush will/probably help? I am tired of
> taking it to the guy and he's giving me the "see no evil, hear no evil"
> treating. What noise? I don't hear any noise.
>
> *sigh*
> c wrote:
> > The inside of a torque converter looks like 2 fan blades really close
> > together. One is spinning when the engine is turning, and the other
spins
> > when the fluid "spins" from the first fan. This is what moves the
vehicle.
> > The torque converter locks up when the computer detects that the
> > transmission is in overdrive and the load on the engine and throttle
opening
> > indicate that the vehicle is "cruising". The converter has a clutch in
it
> > which is activated when the computer energizes a switch in the
transmission.
> > Basically what this does is makes the converter a direct drive, much
like
> > releasing the clutch pedal on a manual transmission. It all but
eliminates
> > any slippage in the converter. The benefits are less heat in the
> > transmission fluid, lower engine RPM under cruise conditions and usually
> > better fuel economy. By design, the slippage is usually between 5 and
10%.
> >
> > Chris
> >
> > <lilgrasshopper@gmail.com> wrote in message
> > news:1154438425.966235.243070@i3g2000cwc.googlegro ups.com...
> > >I took it to the transmission guy and he was like, hey, I took it for a
> > > ride, did not hear the sound. Have a nice day. So I told him, man, it
> > > only gets hot in stop and go traffic.
> > >
> > > What do you mean when you said "the torq converter locks up" ??
> > >
> > > -John
> > > PeoplePC news Server wrote:
> > >> Dude, my 97 ZJ does the exact same thing after having my trans
rebuilt.
> > >> Only
> > >> does it when it is hot out, long slow moving traffic or slow moving
on
> > >> the
> > >> trails. It got so bad once it sounded like a bolt wizzing and
gringing
> > >> around the scatter shield between the trans and engine block so I
shut
> > >> her
> > >> down, removed the access panel to see if the guy forgot to tighten up
a
> > >> torq
> > >> converter bolt, but nothing was lose or missing..?? I let it cool for
> > >> about
> > >> an hour, started her up and all was fine..?? Over the months I
noticed
> > >> the
> > >> clanking will go away once the torq converter locks up, I even have
the
> > >> sound on video as I record allot of our trail rides with a bumper
cam,
> > >> showed it to the dude that rebuilt my trans (from Mr Transmission)
and he
> > >> swears that sound could not be comming from the transmission... But
it IS
> > >> comming from the transmission, so I will prolly have to eat another
> > >> rebuild
> > >> sooner or later cuz of that noise..
> > >>
> > >> Now, I do have close to 100K miles on that rebuild though, I change
my
> > >> fluid
> > >> and filter every 30K - 40K miles as I am terrably rough on her, and
can
> > >> drive 400 miles in a bad week for my job while rolling 32" mud tires,
> > >> factory gearing and a 4" lift. Very embarrassing to pass other trail
> > >> riders
> > >> as I am sure they think it is a rod knocking, my clanking will get so
bad
> > >> it
> > >> WILL make the noise in N or park, the olny cure I have found is to
either
> > >> stop and let her cool down or drive maybe 30 miles on the highway so
the
> > >> torq converter will lock then it will cool down on it's own and stop
the
> > >> noise. I had the trans guy put an external trans cooler with a rather
> > >> large
> > >> fan on it right after I 1st noticed the clanking sound, did not help
but
> > >> I
> > >> am sure it did not hurt either..
> > >>
> > >> Jerry..
> > >>
> > >> <lilgrasshopper@gmail.com> wrote in message
> > >> news:1153710466.306465.198680@p79g2000cwp.googlegr oups.com...
> > >> > Hi all,
> > >> >
> > >> > I have a 1995 Jeep Grand Cherokee from hell.
> > >> >
> > >> > I recently had the transmisson rebuilt. (It was not engaging). I
also
> > >> > had the radiator replaced. Because the engine was reving and the
> > >> > transmission was not engaging, it blew the radiator.
> > >> >
> > >> > Now:
> > >> >
> > >> > I can drive on the highway all day and nothing bad will happen but
once
> > >> > I get into stop and go traffic, like today, on a hot day, I would
start
> > >> > to hear some clanking, then it would get louder, like something
> > >> > spinning and hitting something else. If I press on the gas pedal to
go
> > >> > faster, the clanking sound would be faster, more frequent so I am
> > >> > thinking it has something to do with something spinning while I
press
> > >> > on the gas pedal (yeah, really car smart there, lol), if I put it
Park,
> > >> > the sound goes away but if I put it in drive to start driving, it
would
> > >> > make the clanking sound, hard to explain the sound, like a fan is
> > >> > running and you stick a pencil into it...I think. Now, the thing
is, if
> > >> > I pull the car over, pop the hood, wait like 10 mins, snap the
hood,
> > >> > and start driving, the sound is gone. When I popped the hood, the
> > >> > engine was really hot but like I said, today was like 90 outside.
So to
> > >> > sum up..
> > >> >
> > >> > 1. Drive on highway -- Fine.
> > >> > 2. Stop and go traffic on hot day --- start to hear clicking sound
> > >> > follows by clanking sound.
> > >> > 3. Put car in Park the sound goes away.
> > >> > 4. Pop the hood, let the engine cool for a few minutes, the sound
goes
> > >> > away.
> > >> > 5. Recently had the Tranmission rebuilt, radiator replaced.
> > >> >
> > >> >
> > >> > The thing is, it is hard to troubleshoot, if I take it to the
repair
> > >> > shop, I would have to have it making the sound but when it happens,
I'm
> > >> > afraid to keep on driving so I'd pull over and pop the hood to let
it
> > >> > cool now. I don't want to ruin whatever that is making that
clanking
> > >> > sound.
> > >> > Also, the car has a strong hum sound, like ummmmmmmmmmm sound,
could be
> > >> > from the exhaust system, not sure if it's related.
> > >> >
> > >> > Any suggestion help , idea is really apreciated.
> > >> >
> > >> > -J.
> > >> >
> > >
>
#129
Guest
Posts: n/a
Re: clanking sound that driving me nuts.
Insufficient transmission cooling will usually manifest as burnt, smelly
fluid, slipping and finally outright failure. Clanking is not a common sign
of this, but it certainly won't hurt to flush your cooling system. Lots of
"auto repair technicians" will suggest cooling system flush, oil change,
rotate tires, etc. when they don't know what else to do, however.
Earle
<lilgrasshopper@gmail.com> wrote in message
news:1154448954.714748.42300@m79g2000cwm.googlegro ups.com...
> Thanks.
>
> Well, when I had my radiator done, the guy said I should get a flush.
> Would it make sense to reason that the transmission is not getting
> cooled sufficiently causing the clanking (read my post and responses).
> A radiator cooling system flush will/probably help? I am tired of
> taking it to the guy and he's giving me the "see no evil, hear no evil"
> treating. What noise? I don't hear any noise.
>
> *sigh*
> c wrote:
> > The inside of a torque converter looks like 2 fan blades really close
> > together. One is spinning when the engine is turning, and the other
spins
> > when the fluid "spins" from the first fan. This is what moves the
vehicle.
> > The torque converter locks up when the computer detects that the
> > transmission is in overdrive and the load on the engine and throttle
opening
> > indicate that the vehicle is "cruising". The converter has a clutch in
it
> > which is activated when the computer energizes a switch in the
transmission.
> > Basically what this does is makes the converter a direct drive, much
like
> > releasing the clutch pedal on a manual transmission. It all but
eliminates
> > any slippage in the converter. The benefits are less heat in the
> > transmission fluid, lower engine RPM under cruise conditions and usually
> > better fuel economy. By design, the slippage is usually between 5 and
10%.
> >
> > Chris
> >
> > <lilgrasshopper@gmail.com> wrote in message
> > news:1154438425.966235.243070@i3g2000cwc.googlegro ups.com...
> > >I took it to the transmission guy and he was like, hey, I took it for a
> > > ride, did not hear the sound. Have a nice day. So I told him, man, it
> > > only gets hot in stop and go traffic.
> > >
> > > What do you mean when you said "the torq converter locks up" ??
> > >
> > > -John
> > > PeoplePC news Server wrote:
> > >> Dude, my 97 ZJ does the exact same thing after having my trans
rebuilt.
> > >> Only
> > >> does it when it is hot out, long slow moving traffic or slow moving
on
> > >> the
> > >> trails. It got so bad once it sounded like a bolt wizzing and
gringing
> > >> around the scatter shield between the trans and engine block so I
shut
> > >> her
> > >> down, removed the access panel to see if the guy forgot to tighten up
a
> > >> torq
> > >> converter bolt, but nothing was lose or missing..?? I let it cool for
> > >> about
> > >> an hour, started her up and all was fine..?? Over the months I
noticed
> > >> the
> > >> clanking will go away once the torq converter locks up, I even have
the
> > >> sound on video as I record allot of our trail rides with a bumper
cam,
> > >> showed it to the dude that rebuilt my trans (from Mr Transmission)
and he
> > >> swears that sound could not be comming from the transmission... But
it IS
> > >> comming from the transmission, so I will prolly have to eat another
> > >> rebuild
> > >> sooner or later cuz of that noise..
> > >>
> > >> Now, I do have close to 100K miles on that rebuild though, I change
my
> > >> fluid
> > >> and filter every 30K - 40K miles as I am terrably rough on her, and
can
> > >> drive 400 miles in a bad week for my job while rolling 32" mud tires,
> > >> factory gearing and a 4" lift. Very embarrassing to pass other trail
> > >> riders
> > >> as I am sure they think it is a rod knocking, my clanking will get so
bad
> > >> it
> > >> WILL make the noise in N or park, the olny cure I have found is to
either
> > >> stop and let her cool down or drive maybe 30 miles on the highway so
the
> > >> torq converter will lock then it will cool down on it's own and stop
the
> > >> noise. I had the trans guy put an external trans cooler with a rather
> > >> large
> > >> fan on it right after I 1st noticed the clanking sound, did not help
but
> > >> I
> > >> am sure it did not hurt either..
> > >>
> > >> Jerry..
> > >>
> > >> <lilgrasshopper@gmail.com> wrote in message
> > >> news:1153710466.306465.198680@p79g2000cwp.googlegr oups.com...
> > >> > Hi all,
> > >> >
> > >> > I have a 1995 Jeep Grand Cherokee from hell.
> > >> >
> > >> > I recently had the transmisson rebuilt. (It was not engaging). I
also
> > >> > had the radiator replaced. Because the engine was reving and the
> > >> > transmission was not engaging, it blew the radiator.
> > >> >
> > >> > Now:
> > >> >
> > >> > I can drive on the highway all day and nothing bad will happen but
once
> > >> > I get into stop and go traffic, like today, on a hot day, I would
start
> > >> > to hear some clanking, then it would get louder, like something
> > >> > spinning and hitting something else. If I press on the gas pedal to
go
> > >> > faster, the clanking sound would be faster, more frequent so I am
> > >> > thinking it has something to do with something spinning while I
press
> > >> > on the gas pedal (yeah, really car smart there, lol), if I put it
Park,
> > >> > the sound goes away but if I put it in drive to start driving, it
would
> > >> > make the clanking sound, hard to explain the sound, like a fan is
> > >> > running and you stick a pencil into it...I think. Now, the thing
is, if
> > >> > I pull the car over, pop the hood, wait like 10 mins, snap the
hood,
> > >> > and start driving, the sound is gone. When I popped the hood, the
> > >> > engine was really hot but like I said, today was like 90 outside.
So to
> > >> > sum up..
> > >> >
> > >> > 1. Drive on highway -- Fine.
> > >> > 2. Stop and go traffic on hot day --- start to hear clicking sound
> > >> > follows by clanking sound.
> > >> > 3. Put car in Park the sound goes away.
> > >> > 4. Pop the hood, let the engine cool for a few minutes, the sound
goes
> > >> > away.
> > >> > 5. Recently had the Tranmission rebuilt, radiator replaced.
> > >> >
> > >> >
> > >> > The thing is, it is hard to troubleshoot, if I take it to the
repair
> > >> > shop, I would have to have it making the sound but when it happens,
I'm
> > >> > afraid to keep on driving so I'd pull over and pop the hood to let
it
> > >> > cool now. I don't want to ruin whatever that is making that
clanking
> > >> > sound.
> > >> > Also, the car has a strong hum sound, like ummmmmmmmmmm sound,
could be
> > >> > from the exhaust system, not sure if it's related.
> > >> >
> > >> > Any suggestion help , idea is really apreciated.
> > >> >
> > >> > -J.
> > >> >
> > >
>
fluid, slipping and finally outright failure. Clanking is not a common sign
of this, but it certainly won't hurt to flush your cooling system. Lots of
"auto repair technicians" will suggest cooling system flush, oil change,
rotate tires, etc. when they don't know what else to do, however.
Earle
<lilgrasshopper@gmail.com> wrote in message
news:1154448954.714748.42300@m79g2000cwm.googlegro ups.com...
> Thanks.
>
> Well, when I had my radiator done, the guy said I should get a flush.
> Would it make sense to reason that the transmission is not getting
> cooled sufficiently causing the clanking (read my post and responses).
> A radiator cooling system flush will/probably help? I am tired of
> taking it to the guy and he's giving me the "see no evil, hear no evil"
> treating. What noise? I don't hear any noise.
>
> *sigh*
> c wrote:
> > The inside of a torque converter looks like 2 fan blades really close
> > together. One is spinning when the engine is turning, and the other
spins
> > when the fluid "spins" from the first fan. This is what moves the
vehicle.
> > The torque converter locks up when the computer detects that the
> > transmission is in overdrive and the load on the engine and throttle
opening
> > indicate that the vehicle is "cruising". The converter has a clutch in
it
> > which is activated when the computer energizes a switch in the
transmission.
> > Basically what this does is makes the converter a direct drive, much
like
> > releasing the clutch pedal on a manual transmission. It all but
eliminates
> > any slippage in the converter. The benefits are less heat in the
> > transmission fluid, lower engine RPM under cruise conditions and usually
> > better fuel economy. By design, the slippage is usually between 5 and
10%.
> >
> > Chris
> >
> > <lilgrasshopper@gmail.com> wrote in message
> > news:1154438425.966235.243070@i3g2000cwc.googlegro ups.com...
> > >I took it to the transmission guy and he was like, hey, I took it for a
> > > ride, did not hear the sound. Have a nice day. So I told him, man, it
> > > only gets hot in stop and go traffic.
> > >
> > > What do you mean when you said "the torq converter locks up" ??
> > >
> > > -John
> > > PeoplePC news Server wrote:
> > >> Dude, my 97 ZJ does the exact same thing after having my trans
rebuilt.
> > >> Only
> > >> does it when it is hot out, long slow moving traffic or slow moving
on
> > >> the
> > >> trails. It got so bad once it sounded like a bolt wizzing and
gringing
> > >> around the scatter shield between the trans and engine block so I
shut
> > >> her
> > >> down, removed the access panel to see if the guy forgot to tighten up
a
> > >> torq
> > >> converter bolt, but nothing was lose or missing..?? I let it cool for
> > >> about
> > >> an hour, started her up and all was fine..?? Over the months I
noticed
> > >> the
> > >> clanking will go away once the torq converter locks up, I even have
the
> > >> sound on video as I record allot of our trail rides with a bumper
cam,
> > >> showed it to the dude that rebuilt my trans (from Mr Transmission)
and he
> > >> swears that sound could not be comming from the transmission... But
it IS
> > >> comming from the transmission, so I will prolly have to eat another
> > >> rebuild
> > >> sooner or later cuz of that noise..
> > >>
> > >> Now, I do have close to 100K miles on that rebuild though, I change
my
> > >> fluid
> > >> and filter every 30K - 40K miles as I am terrably rough on her, and
can
> > >> drive 400 miles in a bad week for my job while rolling 32" mud tires,
> > >> factory gearing and a 4" lift. Very embarrassing to pass other trail
> > >> riders
> > >> as I am sure they think it is a rod knocking, my clanking will get so
bad
> > >> it
> > >> WILL make the noise in N or park, the olny cure I have found is to
either
> > >> stop and let her cool down or drive maybe 30 miles on the highway so
the
> > >> torq converter will lock then it will cool down on it's own and stop
the
> > >> noise. I had the trans guy put an external trans cooler with a rather
> > >> large
> > >> fan on it right after I 1st noticed the clanking sound, did not help
but
> > >> I
> > >> am sure it did not hurt either..
> > >>
> > >> Jerry..
> > >>
> > >> <lilgrasshopper@gmail.com> wrote in message
> > >> news:1153710466.306465.198680@p79g2000cwp.googlegr oups.com...
> > >> > Hi all,
> > >> >
> > >> > I have a 1995 Jeep Grand Cherokee from hell.
> > >> >
> > >> > I recently had the transmisson rebuilt. (It was not engaging). I
also
> > >> > had the radiator replaced. Because the engine was reving and the
> > >> > transmission was not engaging, it blew the radiator.
> > >> >
> > >> > Now:
> > >> >
> > >> > I can drive on the highway all day and nothing bad will happen but
once
> > >> > I get into stop and go traffic, like today, on a hot day, I would
start
> > >> > to hear some clanking, then it would get louder, like something
> > >> > spinning and hitting something else. If I press on the gas pedal to
go
> > >> > faster, the clanking sound would be faster, more frequent so I am
> > >> > thinking it has something to do with something spinning while I
press
> > >> > on the gas pedal (yeah, really car smart there, lol), if I put it
Park,
> > >> > the sound goes away but if I put it in drive to start driving, it
would
> > >> > make the clanking sound, hard to explain the sound, like a fan is
> > >> > running and you stick a pencil into it...I think. Now, the thing
is, if
> > >> > I pull the car over, pop the hood, wait like 10 mins, snap the
hood,
> > >> > and start driving, the sound is gone. When I popped the hood, the
> > >> > engine was really hot but like I said, today was like 90 outside.
So to
> > >> > sum up..
> > >> >
> > >> > 1. Drive on highway -- Fine.
> > >> > 2. Stop and go traffic on hot day --- start to hear clicking sound
> > >> > follows by clanking sound.
> > >> > 3. Put car in Park the sound goes away.
> > >> > 4. Pop the hood, let the engine cool for a few minutes, the sound
goes
> > >> > away.
> > >> > 5. Recently had the Tranmission rebuilt, radiator replaced.
> > >> >
> > >> >
> > >> > The thing is, it is hard to troubleshoot, if I take it to the
repair
> > >> > shop, I would have to have it making the sound but when it happens,
I'm
> > >> > afraid to keep on driving so I'd pull over and pop the hood to let
it
> > >> > cool now. I don't want to ruin whatever that is making that
clanking
> > >> > sound.
> > >> > Also, the car has a strong hum sound, like ummmmmmmmmmm sound,
could be
> > >> > from the exhaust system, not sure if it's related.
> > >> >
> > >> > Any suggestion help , idea is really apreciated.
> > >> >
> > >> > -J.
> > >> >
> > >
>
#130
Guest
Posts: n/a
Re: clanking sound that driving me nuts.
I flushed mine a week or so ago and no change at all, still clanks, I am not
as freaked as I was when the sound 1st started though, I almost don't notice
it anymore in the city, on the trails it is totaly embarrassing though. Like
I said earlier I beat the poor girl off road with stock gears mud tires a
lift with about 100K since the rebuild and she still keeps on keepin' on, I
guess I will worry about it once it duz finaly die. Been looking around the
bone yards for a sorta cheap emergancy replacement in case it takes a quick
dump on me with no warning, it's my daily driver so have nothing to fall
back on..
Jerry
<lilgrasshopper@gmail.com> wrote in message
news:1154448954.714748.42300@m79g2000cwm.googlegro ups.com...
> Thanks.
>
> Well, when I had my radiator done, the guy said I should get a flush.
> Would it make sense to reason that the transmission is not getting
> cooled sufficiently causing the clanking (read my post and responses).
> A radiator cooling system flush will/probably help? I am tired of
> taking it to the guy and he's giving me the "see no evil, hear no evil"
> treating. What noise? I don't hear any noise.
>
> *sigh*
> c wrote:
>> The inside of a torque converter looks like 2 fan blades really close
>> together. One is spinning when the engine is turning, and the other spins
>> when the fluid "spins" from the first fan. This is what moves the
>> vehicle.
>> The torque converter locks up when the computer detects that the
>> transmission is in overdrive and the load on the engine and throttle
>> opening
>> indicate that the vehicle is "cruising". The converter has a clutch in it
>> which is activated when the computer energizes a switch in the
>> transmission.
>> Basically what this does is makes the converter a direct drive, much like
>> releasing the clutch pedal on a manual transmission. It all but
>> eliminates
>> any slippage in the converter. The benefits are less heat in the
>> transmission fluid, lower engine RPM under cruise conditions and usually
>> better fuel economy. By design, the slippage is usually between 5 and
>> 10%.
>>
>> Chris
as freaked as I was when the sound 1st started though, I almost don't notice
it anymore in the city, on the trails it is totaly embarrassing though. Like
I said earlier I beat the poor girl off road with stock gears mud tires a
lift with about 100K since the rebuild and she still keeps on keepin' on, I
guess I will worry about it once it duz finaly die. Been looking around the
bone yards for a sorta cheap emergancy replacement in case it takes a quick
dump on me with no warning, it's my daily driver so have nothing to fall
back on..
Jerry
<lilgrasshopper@gmail.com> wrote in message
news:1154448954.714748.42300@m79g2000cwm.googlegro ups.com...
> Thanks.
>
> Well, when I had my radiator done, the guy said I should get a flush.
> Would it make sense to reason that the transmission is not getting
> cooled sufficiently causing the clanking (read my post and responses).
> A radiator cooling system flush will/probably help? I am tired of
> taking it to the guy and he's giving me the "see no evil, hear no evil"
> treating. What noise? I don't hear any noise.
>
> *sigh*
> c wrote:
>> The inside of a torque converter looks like 2 fan blades really close
>> together. One is spinning when the engine is turning, and the other spins
>> when the fluid "spins" from the first fan. This is what moves the
>> vehicle.
>> The torque converter locks up when the computer detects that the
>> transmission is in overdrive and the load on the engine and throttle
>> opening
>> indicate that the vehicle is "cruising". The converter has a clutch in it
>> which is activated when the computer energizes a switch in the
>> transmission.
>> Basically what this does is makes the converter a direct drive, much like
>> releasing the clutch pedal on a manual transmission. It all but
>> eliminates
>> any slippage in the converter. The benefits are less heat in the
>> transmission fluid, lower engine RPM under cruise conditions and usually
>> better fuel economy. By design, the slippage is usually between 5 and
>> 10%.
>>
>> Chris