CJ7 Transmission Mount
#11
Guest
Posts: n/a
Re: CJ7 Transmission Mount
You're just lucky. ;-) Of course, it helps your luck if bring the
old part with you.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Jerry McGeorge wrote:
>
> My experience with Autozone has been that if you couldn't find it yourself
> hanging on the rack, it would be a crap shoot if they could find anything
> for you much more complex than the coke machine. My local NAPA store seems
> unique in that the folks there not only can find almost anything for an old
> Jeep, they seem to actually give a rat's *** whether you're a satisfied
> customer or not...maybe I'm just lucky!
>
> As for the mount, yes, it should have a stud and two large rubber-like
> dampers. Check 4wd Hardware online and look at how they supply it.
old part with you.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Jerry McGeorge wrote:
>
> My experience with Autozone has been that if you couldn't find it yourself
> hanging on the rack, it would be a crap shoot if they could find anything
> for you much more complex than the coke machine. My local NAPA store seems
> unique in that the folks there not only can find almost anything for an old
> Jeep, they seem to actually give a rat's *** whether you're a satisfied
> customer or not...maybe I'm just lucky!
>
> As for the mount, yes, it should have a stud and two large rubber-like
> dampers. Check 4wd Hardware online and look at how they supply it.
#12
Guest
Posts: n/a
Re: CJ7 Transmission Mount
You're just lucky. ;-) Of course, it helps your luck if bring the
old part with you.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Jerry McGeorge wrote:
>
> My experience with Autozone has been that if you couldn't find it yourself
> hanging on the rack, it would be a crap shoot if they could find anything
> for you much more complex than the coke machine. My local NAPA store seems
> unique in that the folks there not only can find almost anything for an old
> Jeep, they seem to actually give a rat's *** whether you're a satisfied
> customer or not...maybe I'm just lucky!
>
> As for the mount, yes, it should have a stud and two large rubber-like
> dampers. Check 4wd Hardware online and look at how they supply it.
old part with you.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Jerry McGeorge wrote:
>
> My experience with Autozone has been that if you couldn't find it yourself
> hanging on the rack, it would be a crap shoot if they could find anything
> for you much more complex than the coke machine. My local NAPA store seems
> unique in that the folks there not only can find almost anything for an old
> Jeep, they seem to actually give a rat's *** whether you're a satisfied
> customer or not...maybe I'm just lucky!
>
> As for the mount, yes, it should have a stud and two large rubber-like
> dampers. Check 4wd Hardware online and look at how they supply it.
#13
Guest
Posts: n/a
Re: CJ7 Transmission Mount
You're just lucky. ;-) Of course, it helps your luck if bring the
old part with you.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Jerry McGeorge wrote:
>
> My experience with Autozone has been that if you couldn't find it yourself
> hanging on the rack, it would be a crap shoot if they could find anything
> for you much more complex than the coke machine. My local NAPA store seems
> unique in that the folks there not only can find almost anything for an old
> Jeep, they seem to actually give a rat's *** whether you're a satisfied
> customer or not...maybe I'm just lucky!
>
> As for the mount, yes, it should have a stud and two large rubber-like
> dampers. Check 4wd Hardware online and look at how they supply it.
old part with you.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Jerry McGeorge wrote:
>
> My experience with Autozone has been that if you couldn't find it yourself
> hanging on the rack, it would be a crap shoot if they could find anything
> for you much more complex than the coke machine. My local NAPA store seems
> unique in that the folks there not only can find almost anything for an old
> Jeep, they seem to actually give a rat's *** whether you're a satisfied
> customer or not...maybe I'm just lucky!
>
> As for the mount, yes, it should have a stud and two large rubber-like
> dampers. Check 4wd Hardware online and look at how they supply it.
#14
Guest
Posts: n/a
Re: CJ7 Transmission Mount
On or about Sun, 16 Nov 2003, ABanks5@columbus.rr.com of ABanks5@columbus.r...:
> Okay folks,,,Autozone sucks ***. I bought a drain plug for my 83CJ7 258 from
> them,..didn't fit. Bought a valve cover gasket from them....didn't fit.
> Bought a drive shaft Ujoint retainer from them....didn't fit. Those guys
My mileage varies. The only thing that I've gotten from AutoZone that
wasn't what I'd expected was the Blazer blower motor, and Mike says that
GM ran the same number on two different motors. Perhaps it is an
individual store or regional thing?
> Okay folks,,,Autozone sucks ***. I bought a drain plug for my 83CJ7 258 from
> them,..didn't fit. Bought a valve cover gasket from them....didn't fit.
> Bought a drive shaft Ujoint retainer from them....didn't fit. Those guys
My mileage varies. The only thing that I've gotten from AutoZone that
wasn't what I'd expected was the Blazer blower motor, and Mike says that
GM ran the same number on two different motors. Perhaps it is an
individual store or regional thing?
#15
Guest
Posts: n/a
Re: CJ7 Transmission Mount
On or about Sun, 16 Nov 2003, ABanks5@columbus.rr.com of ABanks5@columbus.r...:
> Okay folks,,,Autozone sucks ***. I bought a drain plug for my 83CJ7 258 from
> them,..didn't fit. Bought a valve cover gasket from them....didn't fit.
> Bought a drive shaft Ujoint retainer from them....didn't fit. Those guys
My mileage varies. The only thing that I've gotten from AutoZone that
wasn't what I'd expected was the Blazer blower motor, and Mike says that
GM ran the same number on two different motors. Perhaps it is an
individual store or regional thing?
> Okay folks,,,Autozone sucks ***. I bought a drain plug for my 83CJ7 258 from
> them,..didn't fit. Bought a valve cover gasket from them....didn't fit.
> Bought a drive shaft Ujoint retainer from them....didn't fit. Those guys
My mileage varies. The only thing that I've gotten from AutoZone that
wasn't what I'd expected was the Blazer blower motor, and Mike says that
GM ran the same number on two different motors. Perhaps it is an
individual store or regional thing?
#16
Guest
Posts: n/a
Re: CJ7 Transmission Mount
On or about Sun, 16 Nov 2003, ABanks5@columbus.rr.com of ABanks5@columbus.r...:
> Okay folks,,,Autozone sucks ***. I bought a drain plug for my 83CJ7 258 from
> them,..didn't fit. Bought a valve cover gasket from them....didn't fit.
> Bought a drive shaft Ujoint retainer from them....didn't fit. Those guys
My mileage varies. The only thing that I've gotten from AutoZone that
wasn't what I'd expected was the Blazer blower motor, and Mike says that
GM ran the same number on two different motors. Perhaps it is an
individual store or regional thing?
> Okay folks,,,Autozone sucks ***. I bought a drain plug for my 83CJ7 258 from
> them,..didn't fit. Bought a valve cover gasket from them....didn't fit.
> Bought a drive shaft Ujoint retainer from them....didn't fit. Those guys
My mileage varies. The only thing that I've gotten from AutoZone that
wasn't what I'd expected was the Blazer blower motor, and Mike says that
GM ran the same number on two different motors. Perhaps it is an
individual store or regional thing?
Thread
Thread Starter
Forum
Replies
Last Post
L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III
Jeep Mailing List
2
09-15-2003 05:53 PM
Jerry Bransford
Jeep Mailing List
0
09-15-2003 12:49 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)