CJ7 Project for Sale
09-15-2007, 07:53 PM
#21
Guest
Posts: n/a
Re: CJ7 Project for Sale
"griffin" <gryffy@WEEEEshaw.ca> wrote in message
news:zVTGi.178556$fJ5.105107@pd7urf1no...
> Cool, that must come in handy for storage and project-building.
>
Yeah, it really does come in handy, but it also "catches" everything else
that needs to be out of sight as well.
Spdloader
09-16-2007, 12:04 AM
#22
Guest
Posts: n/a
Re: CJ7 Project for Sale
Mike Romain wrote:
> Private sales are welcomed by the Charter.
>
> That is a decent price for a parts vehicle, especially if it isn't
> rusted out.
>
> Too bad you are so far away and in a different country. I need a frame
> for mine in the worst way....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
>
> Spdloader wrote:
>> First, let me say I hope I'm not violating any newsgroup charter with
>> this, but:
>>
>> I have a 1986 CJ-7 in my basement which is for sale in part or in
>> whole. I would rather sell it as a whole.
>>
>> It was gently rolled by my cousin, resulting in the hard top being
>> destroyed, and the left rear corner being crunched.
>>
>> It needs a hood, front grill, radiator, fan and left front fender.
>> Left side of windshield is bent a little, as is the window frame of
>> the hard left door.
>>
>> The engine is out and on an engine stand. Was going to restore, wife
>> says get it out. I lost the coin toss.
>>
>> Windshield glass is still fine.
>>
>> This was originally a 2.5 four cylinder vehicle, but converted to the
>> 258 six.
>>
>> It has a running 258 six, but it smokes and has timing chain slap
>> noise, it has a perfect condition 4spd manual I think it's an AX4,
>> and a Dana 300 transfer case. I believe it has a Dana 20 rear end, but
>> not sure of the front. It is original.
>>
>> It has relatively new custom driveshafts due to the engine swap.
>>
>> All lights and gauges work, even ones in the damaged front end, which
>> has been stripped of the damaged sheet metal.
>>
>> Interior is all there but front seats need to be recovered.
>>
>> Frame is straight with no rust. It has the original white spoke mag
>> wheels, the fifth (spare) is bent but there.
>>
>> It is an original NC vehicle, one owner, and belongs to my cousin, I
>> am selling it for him.
>>
>> It can be had as a whole for $700 bucks. I have clear title, still in
>> my cousins name.
>>
>> If anyone is interested, you can let me know and I'll answer any
>> questions.
>>
>> Spdloader
>>
>> I can be reached at :
>>
>> spdloader
>>
>> at
>>
>> excite
>>
>> dot
>>
>> com
>>
>>
>>
He doesn't really say where it is, just that it's "an original NC
vehicle" but from his email it sounds like he's in the Greensboro NC area.
Jeff DeWitt
> Private sales are welcomed by the Charter.
>
> That is a decent price for a parts vehicle, especially if it isn't
> rusted out.
>
> Too bad you are so far away and in a different country. I need a frame
> for mine in the worst way....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
>
> Spdloader wrote:
>> First, let me say I hope I'm not violating any newsgroup charter with
>> this, but:
>>
>> I have a 1986 CJ-7 in my basement which is for sale in part or in
>> whole. I would rather sell it as a whole.
>>
>> It was gently rolled by my cousin, resulting in the hard top being
>> destroyed, and the left rear corner being crunched.
>>
>> It needs a hood, front grill, radiator, fan and left front fender.
>> Left side of windshield is bent a little, as is the window frame of
>> the hard left door.
>>
>> The engine is out and on an engine stand. Was going to restore, wife
>> says get it out. I lost the coin toss.
>>
>> Windshield glass is still fine.
>>
>> This was originally a 2.5 four cylinder vehicle, but converted to the
>> 258 six.
>>
>> It has a running 258 six, but it smokes and has timing chain slap
>> noise, it has a perfect condition 4spd manual I think it's an AX4,
>> and a Dana 300 transfer case. I believe it has a Dana 20 rear end, but
>> not sure of the front. It is original.
>>
>> It has relatively new custom driveshafts due to the engine swap.
>>
>> All lights and gauges work, even ones in the damaged front end, which
>> has been stripped of the damaged sheet metal.
>>
>> Interior is all there but front seats need to be recovered.
>>
>> Frame is straight with no rust. It has the original white spoke mag
>> wheels, the fifth (spare) is bent but there.
>>
>> It is an original NC vehicle, one owner, and belongs to my cousin, I
>> am selling it for him.
>>
>> It can be had as a whole for $700 bucks. I have clear title, still in
>> my cousins name.
>>
>> If anyone is interested, you can let me know and I'll answer any
>> questions.
>>
>> Spdloader
>>
>> I can be reached at :
>>
>> spdloader
>>
>> at
>>
>> excite
>>
>> dot
>>
>> com
>>
>>
>>
He doesn't really say where it is, just that it's "an original NC
vehicle" but from his email it sounds like he's in the Greensboro NC area.
Jeff DeWitt
09-16-2007, 12:04 AM
#23
Guest
Posts: n/a
Re: CJ7 Project for Sale
Mike Romain wrote:
> Private sales are welcomed by the Charter.
>
> That is a decent price for a parts vehicle, especially if it isn't
> rusted out.
>
> Too bad you are so far away and in a different country. I need a frame
> for mine in the worst way....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
>
> Spdloader wrote:
>> First, let me say I hope I'm not violating any newsgroup charter with
>> this, but:
>>
>> I have a 1986 CJ-7 in my basement which is for sale in part or in
>> whole. I would rather sell it as a whole.
>>
>> It was gently rolled by my cousin, resulting in the hard top being
>> destroyed, and the left rear corner being crunched.
>>
>> It needs a hood, front grill, radiator, fan and left front fender.
>> Left side of windshield is bent a little, as is the window frame of
>> the hard left door.
>>
>> The engine is out and on an engine stand. Was going to restore, wife
>> says get it out. I lost the coin toss.
>>
>> Windshield glass is still fine.
>>
>> This was originally a 2.5 four cylinder vehicle, but converted to the
>> 258 six.
>>
>> It has a running 258 six, but it smokes and has timing chain slap
>> noise, it has a perfect condition 4spd manual I think it's an AX4,
>> and a Dana 300 transfer case. I believe it has a Dana 20 rear end, but
>> not sure of the front. It is original.
>>
>> It has relatively new custom driveshafts due to the engine swap.
>>
>> All lights and gauges work, even ones in the damaged front end, which
>> has been stripped of the damaged sheet metal.
>>
>> Interior is all there but front seats need to be recovered.
>>
>> Frame is straight with no rust. It has the original white spoke mag
>> wheels, the fifth (spare) is bent but there.
>>
>> It is an original NC vehicle, one owner, and belongs to my cousin, I
>> am selling it for him.
>>
>> It can be had as a whole for $700 bucks. I have clear title, still in
>> my cousins name.
>>
>> If anyone is interested, you can let me know and I'll answer any
>> questions.
>>
>> Spdloader
>>
>> I can be reached at :
>>
>> spdloader
>>
>> at
>>
>> excite
>>
>> dot
>>
>> com
>>
>>
>>
He doesn't really say where it is, just that it's "an original NC
vehicle" but from his email it sounds like he's in the Greensboro NC area.
Jeff DeWitt
> Private sales are welcomed by the Charter.
>
> That is a decent price for a parts vehicle, especially if it isn't
> rusted out.
>
> Too bad you are so far away and in a different country. I need a frame
> for mine in the worst way....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
>
> Spdloader wrote:
>> First, let me say I hope I'm not violating any newsgroup charter with
>> this, but:
>>
>> I have a 1986 CJ-7 in my basement which is for sale in part or in
>> whole. I would rather sell it as a whole.
>>
>> It was gently rolled by my cousin, resulting in the hard top being
>> destroyed, and the left rear corner being crunched.
>>
>> It needs a hood, front grill, radiator, fan and left front fender.
>> Left side of windshield is bent a little, as is the window frame of
>> the hard left door.
>>
>> The engine is out and on an engine stand. Was going to restore, wife
>> says get it out. I lost the coin toss.
>>
>> Windshield glass is still fine.
>>
>> This was originally a 2.5 four cylinder vehicle, but converted to the
>> 258 six.
>>
>> It has a running 258 six, but it smokes and has timing chain slap
>> noise, it has a perfect condition 4spd manual I think it's an AX4,
>> and a Dana 300 transfer case. I believe it has a Dana 20 rear end, but
>> not sure of the front. It is original.
>>
>> It has relatively new custom driveshafts due to the engine swap.
>>
>> All lights and gauges work, even ones in the damaged front end, which
>> has been stripped of the damaged sheet metal.
>>
>> Interior is all there but front seats need to be recovered.
>>
>> Frame is straight with no rust. It has the original white spoke mag
>> wheels, the fifth (spare) is bent but there.
>>
>> It is an original NC vehicle, one owner, and belongs to my cousin, I
>> am selling it for him.
>>
>> It can be had as a whole for $700 bucks. I have clear title, still in
>> my cousins name.
>>
>> If anyone is interested, you can let me know and I'll answer any
>> questions.
>>
>> Spdloader
>>
>> I can be reached at :
>>
>> spdloader
>>
>> at
>>
>> excite
>>
>> dot
>>
>> com
>>
>>
>>
He doesn't really say where it is, just that it's "an original NC
vehicle" but from his email it sounds like he's in the Greensboro NC area.
Jeff DeWitt
09-16-2007, 12:04 AM
#24
Guest
Posts: n/a
Re: CJ7 Project for Sale
Mike Romain wrote:
> Private sales are welcomed by the Charter.
>
> That is a decent price for a parts vehicle, especially if it isn't
> rusted out.
>
> Too bad you are so far away and in a different country. I need a frame
> for mine in the worst way....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
>
> Spdloader wrote:
>> First, let me say I hope I'm not violating any newsgroup charter with
>> this, but:
>>
>> I have a 1986 CJ-7 in my basement which is for sale in part or in
>> whole. I would rather sell it as a whole.
>>
>> It was gently rolled by my cousin, resulting in the hard top being
>> destroyed, and the left rear corner being crunched.
>>
>> It needs a hood, front grill, radiator, fan and left front fender.
>> Left side of windshield is bent a little, as is the window frame of
>> the hard left door.
>>
>> The engine is out and on an engine stand. Was going to restore, wife
>> says get it out. I lost the coin toss.
>>
>> Windshield glass is still fine.
>>
>> This was originally a 2.5 four cylinder vehicle, but converted to the
>> 258 six.
>>
>> It has a running 258 six, but it smokes and has timing chain slap
>> noise, it has a perfect condition 4spd manual I think it's an AX4,
>> and a Dana 300 transfer case. I believe it has a Dana 20 rear end, but
>> not sure of the front. It is original.
>>
>> It has relatively new custom driveshafts due to the engine swap.
>>
>> All lights and gauges work, even ones in the damaged front end, which
>> has been stripped of the damaged sheet metal.
>>
>> Interior is all there but front seats need to be recovered.
>>
>> Frame is straight with no rust. It has the original white spoke mag
>> wheels, the fifth (spare) is bent but there.
>>
>> It is an original NC vehicle, one owner, and belongs to my cousin, I
>> am selling it for him.
>>
>> It can be had as a whole for $700 bucks. I have clear title, still in
>> my cousins name.
>>
>> If anyone is interested, you can let me know and I'll answer any
>> questions.
>>
>> Spdloader
>>
>> I can be reached at :
>>
>> spdloader
>>
>> at
>>
>> excite
>>
>> dot
>>
>> com
>>
>>
>>
He doesn't really say where it is, just that it's "an original NC
vehicle" but from his email it sounds like he's in the Greensboro NC area.
Jeff DeWitt
> Private sales are welcomed by the Charter.
>
> That is a decent price for a parts vehicle, especially if it isn't
> rusted out.
>
> Too bad you are so far away and in a different country. I need a frame
> for mine in the worst way....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
>
> Spdloader wrote:
>> First, let me say I hope I'm not violating any newsgroup charter with
>> this, but:
>>
>> I have a 1986 CJ-7 in my basement which is for sale in part or in
>> whole. I would rather sell it as a whole.
>>
>> It was gently rolled by my cousin, resulting in the hard top being
>> destroyed, and the left rear corner being crunched.
>>
>> It needs a hood, front grill, radiator, fan and left front fender.
>> Left side of windshield is bent a little, as is the window frame of
>> the hard left door.
>>
>> The engine is out and on an engine stand. Was going to restore, wife
>> says get it out. I lost the coin toss.
>>
>> Windshield glass is still fine.
>>
>> This was originally a 2.5 four cylinder vehicle, but converted to the
>> 258 six.
>>
>> It has a running 258 six, but it smokes and has timing chain slap
>> noise, it has a perfect condition 4spd manual I think it's an AX4,
>> and a Dana 300 transfer case. I believe it has a Dana 20 rear end, but
>> not sure of the front. It is original.
>>
>> It has relatively new custom driveshafts due to the engine swap.
>>
>> All lights and gauges work, even ones in the damaged front end, which
>> has been stripped of the damaged sheet metal.
>>
>> Interior is all there but front seats need to be recovered.
>>
>> Frame is straight with no rust. It has the original white spoke mag
>> wheels, the fifth (spare) is bent but there.
>>
>> It is an original NC vehicle, one owner, and belongs to my cousin, I
>> am selling it for him.
>>
>> It can be had as a whole for $700 bucks. I have clear title, still in
>> my cousins name.
>>
>> If anyone is interested, you can let me know and I'll answer any
>> questions.
>>
>> Spdloader
>>
>> I can be reached at :
>>
>> spdloader
>>
>> at
>>
>> excite
>>
>> dot
>>
>> com
>>
>>
>>
He doesn't really say where it is, just that it's "an original NC
vehicle" but from his email it sounds like he's in the Greensboro NC area.
Jeff DeWitt
09-16-2007, 12:04 AM
#25
Guest
Posts: n/a
Re: CJ7 Project for Sale
Mike Romain wrote:
> Private sales are welcomed by the Charter.
>
> That is a decent price for a parts vehicle, especially if it isn't
> rusted out.
>
> Too bad you are so far away and in a different country. I need a frame
> for mine in the worst way....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
>
> Spdloader wrote:
>> First, let me say I hope I'm not violating any newsgroup charter with
>> this, but:
>>
>> I have a 1986 CJ-7 in my basement which is for sale in part or in
>> whole. I would rather sell it as a whole.
>>
>> It was gently rolled by my cousin, resulting in the hard top being
>> destroyed, and the left rear corner being crunched.
>>
>> It needs a hood, front grill, radiator, fan and left front fender.
>> Left side of windshield is bent a little, as is the window frame of
>> the hard left door.
>>
>> The engine is out and on an engine stand. Was going to restore, wife
>> says get it out. I lost the coin toss.
>>
>> Windshield glass is still fine.
>>
>> This was originally a 2.5 four cylinder vehicle, but converted to the
>> 258 six.
>>
>> It has a running 258 six, but it smokes and has timing chain slap
>> noise, it has a perfect condition 4spd manual I think it's an AX4,
>> and a Dana 300 transfer case. I believe it has a Dana 20 rear end, but
>> not sure of the front. It is original.
>>
>> It has relatively new custom driveshafts due to the engine swap.
>>
>> All lights and gauges work, even ones in the damaged front end, which
>> has been stripped of the damaged sheet metal.
>>
>> Interior is all there but front seats need to be recovered.
>>
>> Frame is straight with no rust. It has the original white spoke mag
>> wheels, the fifth (spare) is bent but there.
>>
>> It is an original NC vehicle, one owner, and belongs to my cousin, I
>> am selling it for him.
>>
>> It can be had as a whole for $700 bucks. I have clear title, still in
>> my cousins name.
>>
>> If anyone is interested, you can let me know and I'll answer any
>> questions.
>>
>> Spdloader
>>
>> I can be reached at :
>>
>> spdloader
>>
>> at
>>
>> excite
>>
>> dot
>>
>> com
>>
>>
>>
He doesn't really say where it is, just that it's "an original NC
vehicle" but from his email it sounds like he's in the Greensboro NC area.
Jeff DeWitt
> Private sales are welcomed by the Charter.
>
> That is a decent price for a parts vehicle, especially if it isn't
> rusted out.
>
> Too bad you are so far away and in a different country. I need a frame
> for mine in the worst way....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
>
> Spdloader wrote:
>> First, let me say I hope I'm not violating any newsgroup charter with
>> this, but:
>>
>> I have a 1986 CJ-7 in my basement which is for sale in part or in
>> whole. I would rather sell it as a whole.
>>
>> It was gently rolled by my cousin, resulting in the hard top being
>> destroyed, and the left rear corner being crunched.
>>
>> It needs a hood, front grill, radiator, fan and left front fender.
>> Left side of windshield is bent a little, as is the window frame of
>> the hard left door.
>>
>> The engine is out and on an engine stand. Was going to restore, wife
>> says get it out. I lost the coin toss.
>>
>> Windshield glass is still fine.
>>
>> This was originally a 2.5 four cylinder vehicle, but converted to the
>> 258 six.
>>
>> It has a running 258 six, but it smokes and has timing chain slap
>> noise, it has a perfect condition 4spd manual I think it's an AX4,
>> and a Dana 300 transfer case. I believe it has a Dana 20 rear end, but
>> not sure of the front. It is original.
>>
>> It has relatively new custom driveshafts due to the engine swap.
>>
>> All lights and gauges work, even ones in the damaged front end, which
>> has been stripped of the damaged sheet metal.
>>
>> Interior is all there but front seats need to be recovered.
>>
>> Frame is straight with no rust. It has the original white spoke mag
>> wheels, the fifth (spare) is bent but there.
>>
>> It is an original NC vehicle, one owner, and belongs to my cousin, I
>> am selling it for him.
>>
>> It can be had as a whole for $700 bucks. I have clear title, still in
>> my cousins name.
>>
>> If anyone is interested, you can let me know and I'll answer any
>> questions.
>>
>> Spdloader
>>
>> I can be reached at :
>>
>> spdloader
>>
>> at
>>
>> excite
>>
>> dot
>>
>> com
>>
>>
>>
He doesn't really say where it is, just that it's "an original NC
vehicle" but from his email it sounds like he's in the Greensboro NC area.
Jeff DeWitt
09-16-2007, 09:26 AM
#26
Guest
Posts: n/a
Re: CJ7 Project for Sale
"Jeff DeWitt" <JeffDeWitt@nc.rr.com> wrote in message
news:46ecab51$0$16542$4c368faf@roadrunner.com...
> Mike Romain wrote:
>> Private sales are welcomed by the Charter.
>>
>> That is a decent price for a parts vehicle, especially if it isn't rusted
>> out.
>>
>> Too bad you are so far away and in a different country. I need a frame
>> for mine in the worst way....
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> (More Off Road album links at bottom of the view page)
>>
>>
>> Spdloader wrote:
>>> First, let me say I hope I'm not violating any newsgroup charter with
>>> this, but:
>>>
>>> I have a 1986 CJ-7 in my basement which is for sale in part or in whole.
>>> I would rather sell it as a whole.
>>>
>>> It was gently rolled by my cousin, resulting in the hard top being
>>> destroyed, and the left rear corner being crunched.
>>>
>>> It needs a hood, front grill, radiator, fan and left front fender. Left
>>> side of windshield is bent a little, as is the window frame of the hard
>>> left door.
>>>
>>> The engine is out and on an engine stand. Was going to restore, wife
>>> says get it out. I lost the coin toss.
>>>
>>> Windshield glass is still fine.
>>>
>>> This was originally a 2.5 four cylinder vehicle, but converted to the
>>> 258 six.
>>>
>>> It has a running 258 six, but it smokes and has timing chain slap noise,
>>> it has a perfect condition 4spd manual I think it's an AX4, and a Dana
>>> 300 transfer case. I believe it has a Dana 20 rear end, but not sure of
>>> the front. It is original.
>>>
>>> It has relatively new custom driveshafts due to the engine swap.
>>>
>>> All lights and gauges work, even ones in the damaged front end, which
>>> has been stripped of the damaged sheet metal.
>>>
>>> Interior is all there but front seats need to be recovered.
>>>
>>> Frame is straight with no rust. It has the original white spoke mag
>>> wheels, the fifth (spare) is bent but there.
>>>
>>> It is an original NC vehicle, one owner, and belongs to my cousin, I am
>>> selling it for him.
>>>
>>> It can be had as a whole for $700 bucks. I have clear title, still in my
>>> cousins name.
>>>
>>> If anyone is interested, you can let me know and I'll answer any
>>> questions.
>>>
>>> Spdloader
>>>
>>> I can be reached at :
>>>
>>> spdloader
>>>
>>> at
>>>
>>> excite
>>>
>>> dot
>>>
>>> com
>>>
>>>
>>>
> He doesn't really say where it is, just that it's "an original NC vehicle"
> but from his email it sounds like he's in the Greensboro NC area.
>
> Jeff DeWitt
Yep, sorry, I'm in High Point, NC just south of Greensboro.
Spdloader
09-16-2007, 09:26 AM
#27
Guest
Posts: n/a
Re: CJ7 Project for Sale
"Jeff DeWitt" <JeffDeWitt@nc.rr.com> wrote in message
news:46ecab51$0$16542$4c368faf@roadrunner.com...
> Mike Romain wrote:
>> Private sales are welcomed by the Charter.
>>
>> That is a decent price for a parts vehicle, especially if it isn't rusted
>> out.
>>
>> Too bad you are so far away and in a different country. I need a frame
>> for mine in the worst way....
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> (More Off Road album links at bottom of the view page)
>>
>>
>> Spdloader wrote:
>>> First, let me say I hope I'm not violating any newsgroup charter with
>>> this, but:
>>>
>>> I have a 1986 CJ-7 in my basement which is for sale in part or in whole.
>>> I would rather sell it as a whole.
>>>
>>> It was gently rolled by my cousin, resulting in the hard top being
>>> destroyed, and the left rear corner being crunched.
>>>
>>> It needs a hood, front grill, radiator, fan and left front fender. Left
>>> side of windshield is bent a little, as is the window frame of the hard
>>> left door.
>>>
>>> The engine is out and on an engine stand. Was going to restore, wife
>>> says get it out. I lost the coin toss.
>>>
>>> Windshield glass is still fine.
>>>
>>> This was originally a 2.5 four cylinder vehicle, but converted to the
>>> 258 six.
>>>
>>> It has a running 258 six, but it smokes and has timing chain slap noise,
>>> it has a perfect condition 4spd manual I think it's an AX4, and a Dana
>>> 300 transfer case. I believe it has a Dana 20 rear end, but not sure of
>>> the front. It is original.
>>>
>>> It has relatively new custom driveshafts due to the engine swap.
>>>
>>> All lights and gauges work, even ones in the damaged front end, which
>>> has been stripped of the damaged sheet metal.
>>>
>>> Interior is all there but front seats need to be recovered.
>>>
>>> Frame is straight with no rust. It has the original white spoke mag
>>> wheels, the fifth (spare) is bent but there.
>>>
>>> It is an original NC vehicle, one owner, and belongs to my cousin, I am
>>> selling it for him.
>>>
>>> It can be had as a whole for $700 bucks. I have clear title, still in my
>>> cousins name.
>>>
>>> If anyone is interested, you can let me know and I'll answer any
>>> questions.
>>>
>>> Spdloader
>>>
>>> I can be reached at :
>>>
>>> spdloader
>>>
>>> at
>>>
>>> excite
>>>
>>> dot
>>>
>>> com
>>>
>>>
>>>
> He doesn't really say where it is, just that it's "an original NC vehicle"
> but from his email it sounds like he's in the Greensboro NC area.
>
> Jeff DeWitt
Yep, sorry, I'm in High Point, NC just south of Greensboro.
Spdloader
09-16-2007, 09:26 AM
#28
Guest
Posts: n/a
Re: CJ7 Project for Sale
"Jeff DeWitt" <JeffDeWitt@nc.rr.com> wrote in message
news:46ecab51$0$16542$4c368faf@roadrunner.com...
> Mike Romain wrote:
>> Private sales are welcomed by the Charter.
>>
>> That is a decent price for a parts vehicle, especially if it isn't rusted
>> out.
>>
>> Too bad you are so far away and in a different country. I need a frame
>> for mine in the worst way....
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> (More Off Road album links at bottom of the view page)
>>
>>
>> Spdloader wrote:
>>> First, let me say I hope I'm not violating any newsgroup charter with
>>> this, but:
>>>
>>> I have a 1986 CJ-7 in my basement which is for sale in part or in whole.
>>> I would rather sell it as a whole.
>>>
>>> It was gently rolled by my cousin, resulting in the hard top being
>>> destroyed, and the left rear corner being crunched.
>>>
>>> It needs a hood, front grill, radiator, fan and left front fender. Left
>>> side of windshield is bent a little, as is the window frame of the hard
>>> left door.
>>>
>>> The engine is out and on an engine stand. Was going to restore, wife
>>> says get it out. I lost the coin toss.
>>>
>>> Windshield glass is still fine.
>>>
>>> This was originally a 2.5 four cylinder vehicle, but converted to the
>>> 258 six.
>>>
>>> It has a running 258 six, but it smokes and has timing chain slap noise,
>>> it has a perfect condition 4spd manual I think it's an AX4, and a Dana
>>> 300 transfer case. I believe it has a Dana 20 rear end, but not sure of
>>> the front. It is original.
>>>
>>> It has relatively new custom driveshafts due to the engine swap.
>>>
>>> All lights and gauges work, even ones in the damaged front end, which
>>> has been stripped of the damaged sheet metal.
>>>
>>> Interior is all there but front seats need to be recovered.
>>>
>>> Frame is straight with no rust. It has the original white spoke mag
>>> wheels, the fifth (spare) is bent but there.
>>>
>>> It is an original NC vehicle, one owner, and belongs to my cousin, I am
>>> selling it for him.
>>>
>>> It can be had as a whole for $700 bucks. I have clear title, still in my
>>> cousins name.
>>>
>>> If anyone is interested, you can let me know and I'll answer any
>>> questions.
>>>
>>> Spdloader
>>>
>>> I can be reached at :
>>>
>>> spdloader
>>>
>>> at
>>>
>>> excite
>>>
>>> dot
>>>
>>> com
>>>
>>>
>>>
> He doesn't really say where it is, just that it's "an original NC vehicle"
> but from his email it sounds like he's in the Greensboro NC area.
>
> Jeff DeWitt
Yep, sorry, I'm in High Point, NC just south of Greensboro.
Spdloader
09-16-2007, 09:26 AM
#29
Guest
Posts: n/a
Re: CJ7 Project for Sale
"Jeff DeWitt" <JeffDeWitt@nc.rr.com> wrote in message
news:46ecab51$0$16542$4c368faf@roadrunner.com...
> Mike Romain wrote:
>> Private sales are welcomed by the Charter.
>>
>> That is a decent price for a parts vehicle, especially if it isn't rusted
>> out.
>>
>> Too bad you are so far away and in a different country. I need a frame
>> for mine in the worst way....
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's - Gone to the rust pile...
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> (More Off Road album links at bottom of the view page)
>>
>>
>> Spdloader wrote:
>>> First, let me say I hope I'm not violating any newsgroup charter with
>>> this, but:
>>>
>>> I have a 1986 CJ-7 in my basement which is for sale in part or in whole.
>>> I would rather sell it as a whole.
>>>
>>> It was gently rolled by my cousin, resulting in the hard top being
>>> destroyed, and the left rear corner being crunched.
>>>
>>> It needs a hood, front grill, radiator, fan and left front fender. Left
>>> side of windshield is bent a little, as is the window frame of the hard
>>> left door.
>>>
>>> The engine is out and on an engine stand. Was going to restore, wife
>>> says get it out. I lost the coin toss.
>>>
>>> Windshield glass is still fine.
>>>
>>> This was originally a 2.5 four cylinder vehicle, but converted to the
>>> 258 six.
>>>
>>> It has a running 258 six, but it smokes and has timing chain slap noise,
>>> it has a perfect condition 4spd manual I think it's an AX4, and a Dana
>>> 300 transfer case. I believe it has a Dana 20 rear end, but not sure of
>>> the front. It is original.
>>>
>>> It has relatively new custom driveshafts due to the engine swap.
>>>
>>> All lights and gauges work, even ones in the damaged front end, which
>>> has been stripped of the damaged sheet metal.
>>>
>>> Interior is all there but front seats need to be recovered.
>>>
>>> Frame is straight with no rust. It has the original white spoke mag
>>> wheels, the fifth (spare) is bent but there.
>>>
>>> It is an original NC vehicle, one owner, and belongs to my cousin, I am
>>> selling it for him.
>>>
>>> It can be had as a whole for $700 bucks. I have clear title, still in my
>>> cousins name.
>>>
>>> If anyone is interested, you can let me know and I'll answer any
>>> questions.
>>>
>>> Spdloader
>>>
>>> I can be reached at :
>>>
>>> spdloader
>>>
>>> at
>>>
>>> excite
>>>
>>> dot
>>>
>>> com
>>>
>>>
>>>
> He doesn't really say where it is, just that it's "an original NC vehicle"
> but from his email it sounds like he's in the Greensboro NC area.
>
> Jeff DeWitt
Yep, sorry, I'm in High Point, NC just south of Greensboro.
Spdloader
09-16-2007, 04:02 PM
#30
Guest
Posts: n/a
Re: CJ7 Project for Sale
Hey, my bro lives in HP, if you've ever seen this drive around you've seen
him
http://sled351a.dyndns.org/torinohome.html
"Spdloader" <askforit@nospam.triad.rr.com> wrote in message
news:46ed2e40$0$18908$4c368faf@roadrunner.com...
>
> Yep, sorry, I'm in High Point, NC just south of Greensboro.
> Spdloader
>
him
http://sled351a.dyndns.org/torinohome.html
"Spdloader" <askforit@nospam.triad.rr.com> wrote in message
news:46ed2e40$0$18908$4c368faf@roadrunner.com...
>
> Yep, sorry, I'm in High Point, NC just south of Greensboro.
> Spdloader
>
