|
Re: CJ7 Project for Sale
"griffin" <gryffy@WEEEEshaw.ca> wrote in message news:zVTGi.178556$fJ5.105107@pd7urf1no... > Cool, that must come in handy for storage and project-building. > Yeah, it really does come in handy, but it also "catches" everything else that needs to be out of sight as well. Spdloader |
Re: CJ7 Project for Sale
Mike Romain wrote:
> Private sales are welcomed by the Charter. > > That is a decent price for a parts vehicle, especially if it isn't > rusted out. > > Too bad you are so far away and in a different country. I need a frame > for mine in the worst way.... > > Mike > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > 88 Cherokee 235 BFG AT's - Gone to the rust pile... > Canadian Off Road Trips Photos: Non members can still view! > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 > (More Off Road album links at bottom of the view page) > > > Spdloader wrote: >> First, let me say I hope I'm not violating any newsgroup charter with >> this, but: >> >> I have a 1986 CJ-7 in my basement which is for sale in part or in >> whole. I would rather sell it as a whole. >> >> It was gently rolled by my cousin, resulting in the hard top being >> destroyed, and the left rear corner being crunched. >> >> It needs a hood, front grill, radiator, fan and left front fender. >> Left side of windshield is bent a little, as is the window frame of >> the hard left door. >> >> The engine is out and on an engine stand. Was going to restore, wife >> says get it out. I lost the coin toss. >> >> Windshield glass is still fine. >> >> This was originally a 2.5 four cylinder vehicle, but converted to the >> 258 six. >> >> It has a running 258 six, but it smokes and has timing chain slap >> noise, it has a perfect condition 4spd manual I think it's an AX4, >> and a Dana 300 transfer case. I believe it has a Dana 20 rear end, but >> not sure of the front. It is original. >> >> It has relatively new custom driveshafts due to the engine swap. >> >> All lights and gauges work, even ones in the damaged front end, which >> has been stripped of the damaged sheet metal. >> >> Interior is all there but front seats need to be recovered. >> >> Frame is straight with no rust. It has the original white spoke mag >> wheels, the fifth (spare) is bent but there. >> >> It is an original NC vehicle, one owner, and belongs to my cousin, I >> am selling it for him. >> >> It can be had as a whole for $700 bucks. I have clear title, still in >> my cousins name. >> >> If anyone is interested, you can let me know and I'll answer any >> questions. >> >> Spdloader >> >> I can be reached at : >> >> spdloader >> >> at >> >> excite >> >> dot >> >> com >> >> >> He doesn't really say where it is, just that it's "an original NC vehicle" but from his email it sounds like he's in the Greensboro NC area. Jeff DeWitt |
Re: CJ7 Project for Sale
Mike Romain wrote:
> Private sales are welcomed by the Charter. > > That is a decent price for a parts vehicle, especially if it isn't > rusted out. > > Too bad you are so far away and in a different country. I need a frame > for mine in the worst way.... > > Mike > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > 88 Cherokee 235 BFG AT's - Gone to the rust pile... > Canadian Off Road Trips Photos: Non members can still view! > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 > (More Off Road album links at bottom of the view page) > > > Spdloader wrote: >> First, let me say I hope I'm not violating any newsgroup charter with >> this, but: >> >> I have a 1986 CJ-7 in my basement which is for sale in part or in >> whole. I would rather sell it as a whole. >> >> It was gently rolled by my cousin, resulting in the hard top being >> destroyed, and the left rear corner being crunched. >> >> It needs a hood, front grill, radiator, fan and left front fender. >> Left side of windshield is bent a little, as is the window frame of >> the hard left door. >> >> The engine is out and on an engine stand. Was going to restore, wife >> says get it out. I lost the coin toss. >> >> Windshield glass is still fine. >> >> This was originally a 2.5 four cylinder vehicle, but converted to the >> 258 six. >> >> It has a running 258 six, but it smokes and has timing chain slap >> noise, it has a perfect condition 4spd manual I think it's an AX4, >> and a Dana 300 transfer case. I believe it has a Dana 20 rear end, but >> not sure of the front. It is original. >> >> It has relatively new custom driveshafts due to the engine swap. >> >> All lights and gauges work, even ones in the damaged front end, which >> has been stripped of the damaged sheet metal. >> >> Interior is all there but front seats need to be recovered. >> >> Frame is straight with no rust. It has the original white spoke mag >> wheels, the fifth (spare) is bent but there. >> >> It is an original NC vehicle, one owner, and belongs to my cousin, I >> am selling it for him. >> >> It can be had as a whole for $700 bucks. I have clear title, still in >> my cousins name. >> >> If anyone is interested, you can let me know and I'll answer any >> questions. >> >> Spdloader >> >> I can be reached at : >> >> spdloader >> >> at >> >> excite >> >> dot >> >> com >> >> >> He doesn't really say where it is, just that it's "an original NC vehicle" but from his email it sounds like he's in the Greensboro NC area. Jeff DeWitt |
Re: CJ7 Project for Sale
Mike Romain wrote:
> Private sales are welcomed by the Charter. > > That is a decent price for a parts vehicle, especially if it isn't > rusted out. > > Too bad you are so far away and in a different country. I need a frame > for mine in the worst way.... > > Mike > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > 88 Cherokee 235 BFG AT's - Gone to the rust pile... > Canadian Off Road Trips Photos: Non members can still view! > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 > (More Off Road album links at bottom of the view page) > > > Spdloader wrote: >> First, let me say I hope I'm not violating any newsgroup charter with >> this, but: >> >> I have a 1986 CJ-7 in my basement which is for sale in part or in >> whole. I would rather sell it as a whole. >> >> It was gently rolled by my cousin, resulting in the hard top being >> destroyed, and the left rear corner being crunched. >> >> It needs a hood, front grill, radiator, fan and left front fender. >> Left side of windshield is bent a little, as is the window frame of >> the hard left door. >> >> The engine is out and on an engine stand. Was going to restore, wife >> says get it out. I lost the coin toss. >> >> Windshield glass is still fine. >> >> This was originally a 2.5 four cylinder vehicle, but converted to the >> 258 six. >> >> It has a running 258 six, but it smokes and has timing chain slap >> noise, it has a perfect condition 4spd manual I think it's an AX4, >> and a Dana 300 transfer case. I believe it has a Dana 20 rear end, but >> not sure of the front. It is original. >> >> It has relatively new custom driveshafts due to the engine swap. >> >> All lights and gauges work, even ones in the damaged front end, which >> has been stripped of the damaged sheet metal. >> >> Interior is all there but front seats need to be recovered. >> >> Frame is straight with no rust. It has the original white spoke mag >> wheels, the fifth (spare) is bent but there. >> >> It is an original NC vehicle, one owner, and belongs to my cousin, I >> am selling it for him. >> >> It can be had as a whole for $700 bucks. I have clear title, still in >> my cousins name. >> >> If anyone is interested, you can let me know and I'll answer any >> questions. >> >> Spdloader >> >> I can be reached at : >> >> spdloader >> >> at >> >> excite >> >> dot >> >> com >> >> >> He doesn't really say where it is, just that it's "an original NC vehicle" but from his email it sounds like he's in the Greensboro NC area. Jeff DeWitt |
Re: CJ7 Project for Sale
Mike Romain wrote:
> Private sales are welcomed by the Charter. > > That is a decent price for a parts vehicle, especially if it isn't > rusted out. > > Too bad you are so far away and in a different country. I need a frame > for mine in the worst way.... > > Mike > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > 88 Cherokee 235 BFG AT's - Gone to the rust pile... > Canadian Off Road Trips Photos: Non members can still view! > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 > (More Off Road album links at bottom of the view page) > > > Spdloader wrote: >> First, let me say I hope I'm not violating any newsgroup charter with >> this, but: >> >> I have a 1986 CJ-7 in my basement which is for sale in part or in >> whole. I would rather sell it as a whole. >> >> It was gently rolled by my cousin, resulting in the hard top being >> destroyed, and the left rear corner being crunched. >> >> It needs a hood, front grill, radiator, fan and left front fender. >> Left side of windshield is bent a little, as is the window frame of >> the hard left door. >> >> The engine is out and on an engine stand. Was going to restore, wife >> says get it out. I lost the coin toss. >> >> Windshield glass is still fine. >> >> This was originally a 2.5 four cylinder vehicle, but converted to the >> 258 six. >> >> It has a running 258 six, but it smokes and has timing chain slap >> noise, it has a perfect condition 4spd manual I think it's an AX4, >> and a Dana 300 transfer case. I believe it has a Dana 20 rear end, but >> not sure of the front. It is original. >> >> It has relatively new custom driveshafts due to the engine swap. >> >> All lights and gauges work, even ones in the damaged front end, which >> has been stripped of the damaged sheet metal. >> >> Interior is all there but front seats need to be recovered. >> >> Frame is straight with no rust. It has the original white spoke mag >> wheels, the fifth (spare) is bent but there. >> >> It is an original NC vehicle, one owner, and belongs to my cousin, I >> am selling it for him. >> >> It can be had as a whole for $700 bucks. I have clear title, still in >> my cousins name. >> >> If anyone is interested, you can let me know and I'll answer any >> questions. >> >> Spdloader >> >> I can be reached at : >> >> spdloader >> >> at >> >> excite >> >> dot >> >> com >> >> >> He doesn't really say where it is, just that it's "an original NC vehicle" but from his email it sounds like he's in the Greensboro NC area. Jeff DeWitt |
Re: CJ7 Project for Sale
"Jeff DeWitt" <JeffDeWitt@nc.rr.com> wrote in message news:46ecab51$0$16542$4c368faf@roadrunner.com... > Mike Romain wrote: >> Private sales are welcomed by the Charter. >> >> That is a decent price for a parts vehicle, especially if it isn't rusted >> out. >> >> Too bad you are so far away and in a different country. I need a frame >> for mine in the worst way.... >> >> Mike >> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 >> 88 Cherokee 235 BFG AT's - Gone to the rust pile... >> Canadian Off Road Trips Photos: Non members can still view! >> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 >> (More Off Road album links at bottom of the view page) >> >> >> Spdloader wrote: >>> First, let me say I hope I'm not violating any newsgroup charter with >>> this, but: >>> >>> I have a 1986 CJ-7 in my basement which is for sale in part or in whole. >>> I would rather sell it as a whole. >>> >>> It was gently rolled by my cousin, resulting in the hard top being >>> destroyed, and the left rear corner being crunched. >>> >>> It needs a hood, front grill, radiator, fan and left front fender. Left >>> side of windshield is bent a little, as is the window frame of the hard >>> left door. >>> >>> The engine is out and on an engine stand. Was going to restore, wife >>> says get it out. I lost the coin toss. >>> >>> Windshield glass is still fine. >>> >>> This was originally a 2.5 four cylinder vehicle, but converted to the >>> 258 six. >>> >>> It has a running 258 six, but it smokes and has timing chain slap noise, >>> it has a perfect condition 4spd manual I think it's an AX4, and a Dana >>> 300 transfer case. I believe it has a Dana 20 rear end, but not sure of >>> the front. It is original. >>> >>> It has relatively new custom driveshafts due to the engine swap. >>> >>> All lights and gauges work, even ones in the damaged front end, which >>> has been stripped of the damaged sheet metal. >>> >>> Interior is all there but front seats need to be recovered. >>> >>> Frame is straight with no rust. It has the original white spoke mag >>> wheels, the fifth (spare) is bent but there. >>> >>> It is an original NC vehicle, one owner, and belongs to my cousin, I am >>> selling it for him. >>> >>> It can be had as a whole for $700 bucks. I have clear title, still in my >>> cousins name. >>> >>> If anyone is interested, you can let me know and I'll answer any >>> questions. >>> >>> Spdloader >>> >>> I can be reached at : >>> >>> spdloader >>> >>> at >>> >>> excite >>> >>> dot >>> >>> com >>> >>> >>> > He doesn't really say where it is, just that it's "an original NC vehicle" > but from his email it sounds like he's in the Greensboro NC area. > > Jeff DeWitt Yep, sorry, I'm in High Point, NC just south of Greensboro. Spdloader |
Re: CJ7 Project for Sale
"Jeff DeWitt" <JeffDeWitt@nc.rr.com> wrote in message news:46ecab51$0$16542$4c368faf@roadrunner.com... > Mike Romain wrote: >> Private sales are welcomed by the Charter. >> >> That is a decent price for a parts vehicle, especially if it isn't rusted >> out. >> >> Too bad you are so far away and in a different country. I need a frame >> for mine in the worst way.... >> >> Mike >> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 >> 88 Cherokee 235 BFG AT's - Gone to the rust pile... >> Canadian Off Road Trips Photos: Non members can still view! >> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 >> (More Off Road album links at bottom of the view page) >> >> >> Spdloader wrote: >>> First, let me say I hope I'm not violating any newsgroup charter with >>> this, but: >>> >>> I have a 1986 CJ-7 in my basement which is for sale in part or in whole. >>> I would rather sell it as a whole. >>> >>> It was gently rolled by my cousin, resulting in the hard top being >>> destroyed, and the left rear corner being crunched. >>> >>> It needs a hood, front grill, radiator, fan and left front fender. Left >>> side of windshield is bent a little, as is the window frame of the hard >>> left door. >>> >>> The engine is out and on an engine stand. Was going to restore, wife >>> says get it out. I lost the coin toss. >>> >>> Windshield glass is still fine. >>> >>> This was originally a 2.5 four cylinder vehicle, but converted to the >>> 258 six. >>> >>> It has a running 258 six, but it smokes and has timing chain slap noise, >>> it has a perfect condition 4spd manual I think it's an AX4, and a Dana >>> 300 transfer case. I believe it has a Dana 20 rear end, but not sure of >>> the front. It is original. >>> >>> It has relatively new custom driveshafts due to the engine swap. >>> >>> All lights and gauges work, even ones in the damaged front end, which >>> has been stripped of the damaged sheet metal. >>> >>> Interior is all there but front seats need to be recovered. >>> >>> Frame is straight with no rust. It has the original white spoke mag >>> wheels, the fifth (spare) is bent but there. >>> >>> It is an original NC vehicle, one owner, and belongs to my cousin, I am >>> selling it for him. >>> >>> It can be had as a whole for $700 bucks. I have clear title, still in my >>> cousins name. >>> >>> If anyone is interested, you can let me know and I'll answer any >>> questions. >>> >>> Spdloader >>> >>> I can be reached at : >>> >>> spdloader >>> >>> at >>> >>> excite >>> >>> dot >>> >>> com >>> >>> >>> > He doesn't really say where it is, just that it's "an original NC vehicle" > but from his email it sounds like he's in the Greensboro NC area. > > Jeff DeWitt Yep, sorry, I'm in High Point, NC just south of Greensboro. Spdloader |
Re: CJ7 Project for Sale
"Jeff DeWitt" <JeffDeWitt@nc.rr.com> wrote in message news:46ecab51$0$16542$4c368faf@roadrunner.com... > Mike Romain wrote: >> Private sales are welcomed by the Charter. >> >> That is a decent price for a parts vehicle, especially if it isn't rusted >> out. >> >> Too bad you are so far away and in a different country. I need a frame >> for mine in the worst way.... >> >> Mike >> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 >> 88 Cherokee 235 BFG AT's - Gone to the rust pile... >> Canadian Off Road Trips Photos: Non members can still view! >> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 >> (More Off Road album links at bottom of the view page) >> >> >> Spdloader wrote: >>> First, let me say I hope I'm not violating any newsgroup charter with >>> this, but: >>> >>> I have a 1986 CJ-7 in my basement which is for sale in part or in whole. >>> I would rather sell it as a whole. >>> >>> It was gently rolled by my cousin, resulting in the hard top being >>> destroyed, and the left rear corner being crunched. >>> >>> It needs a hood, front grill, radiator, fan and left front fender. Left >>> side of windshield is bent a little, as is the window frame of the hard >>> left door. >>> >>> The engine is out and on an engine stand. Was going to restore, wife >>> says get it out. I lost the coin toss. >>> >>> Windshield glass is still fine. >>> >>> This was originally a 2.5 four cylinder vehicle, but converted to the >>> 258 six. >>> >>> It has a running 258 six, but it smokes and has timing chain slap noise, >>> it has a perfect condition 4spd manual I think it's an AX4, and a Dana >>> 300 transfer case. I believe it has a Dana 20 rear end, but not sure of >>> the front. It is original. >>> >>> It has relatively new custom driveshafts due to the engine swap. >>> >>> All lights and gauges work, even ones in the damaged front end, which >>> has been stripped of the damaged sheet metal. >>> >>> Interior is all there but front seats need to be recovered. >>> >>> Frame is straight with no rust. It has the original white spoke mag >>> wheels, the fifth (spare) is bent but there. >>> >>> It is an original NC vehicle, one owner, and belongs to my cousin, I am >>> selling it for him. >>> >>> It can be had as a whole for $700 bucks. I have clear title, still in my >>> cousins name. >>> >>> If anyone is interested, you can let me know and I'll answer any >>> questions. >>> >>> Spdloader >>> >>> I can be reached at : >>> >>> spdloader >>> >>> at >>> >>> excite >>> >>> dot >>> >>> com >>> >>> >>> > He doesn't really say where it is, just that it's "an original NC vehicle" > but from his email it sounds like he's in the Greensboro NC area. > > Jeff DeWitt Yep, sorry, I'm in High Point, NC just south of Greensboro. Spdloader |
Re: CJ7 Project for Sale
"Jeff DeWitt" <JeffDeWitt@nc.rr.com> wrote in message news:46ecab51$0$16542$4c368faf@roadrunner.com... > Mike Romain wrote: >> Private sales are welcomed by the Charter. >> >> That is a decent price for a parts vehicle, especially if it isn't rusted >> out. >> >> Too bad you are so far away and in a different country. I need a frame >> for mine in the worst way.... >> >> Mike >> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 >> 88 Cherokee 235 BFG AT's - Gone to the rust pile... >> Canadian Off Road Trips Photos: Non members can still view! >> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 >> (More Off Road album links at bottom of the view page) >> >> >> Spdloader wrote: >>> First, let me say I hope I'm not violating any newsgroup charter with >>> this, but: >>> >>> I have a 1986 CJ-7 in my basement which is for sale in part or in whole. >>> I would rather sell it as a whole. >>> >>> It was gently rolled by my cousin, resulting in the hard top being >>> destroyed, and the left rear corner being crunched. >>> >>> It needs a hood, front grill, radiator, fan and left front fender. Left >>> side of windshield is bent a little, as is the window frame of the hard >>> left door. >>> >>> The engine is out and on an engine stand. Was going to restore, wife >>> says get it out. I lost the coin toss. >>> >>> Windshield glass is still fine. >>> >>> This was originally a 2.5 four cylinder vehicle, but converted to the >>> 258 six. >>> >>> It has a running 258 six, but it smokes and has timing chain slap noise, >>> it has a perfect condition 4spd manual I think it's an AX4, and a Dana >>> 300 transfer case. I believe it has a Dana 20 rear end, but not sure of >>> the front. It is original. >>> >>> It has relatively new custom driveshafts due to the engine swap. >>> >>> All lights and gauges work, even ones in the damaged front end, which >>> has been stripped of the damaged sheet metal. >>> >>> Interior is all there but front seats need to be recovered. >>> >>> Frame is straight with no rust. It has the original white spoke mag >>> wheels, the fifth (spare) is bent but there. >>> >>> It is an original NC vehicle, one owner, and belongs to my cousin, I am >>> selling it for him. >>> >>> It can be had as a whole for $700 bucks. I have clear title, still in my >>> cousins name. >>> >>> If anyone is interested, you can let me know and I'll answer any >>> questions. >>> >>> Spdloader >>> >>> I can be reached at : >>> >>> spdloader >>> >>> at >>> >>> excite >>> >>> dot >>> >>> com >>> >>> >>> > He doesn't really say where it is, just that it's "an original NC vehicle" > but from his email it sounds like he's in the Greensboro NC area. > > Jeff DeWitt Yep, sorry, I'm in High Point, NC just south of Greensboro. Spdloader |
Re: CJ7 Project for Sale
Hey, my bro lives in HP, if you've ever seen this drive around you've seen
him http://sled351a.dyndns.org/torinohome.html "Spdloader" <askforit@nospam.triad.rr.com> wrote in message news:46ed2e40$0$18908$4c368faf@roadrunner.com... > > Yep, sorry, I'm in High Point, NC just south of Greensboro. > Spdloader > |
| All times are GMT -4. The time now is 03:10 PM. |
© 2024 MH Sub I, LLC dba Internet Brands