Re: CJ7 Project for Sale
Cool, that must come in handy for storage and project-building.
"Spdloader" <askforit@nospam.triad.rr.com> wrote in message news:46eb76ff$0$7511$4c368faf@roadrunner.com... > My house sits crossways on a hill. I have a garage door going into the > basement on the end. > > ......and, I drove it in there. |
Re: CJ7 Project for Sale
Cool, that must come in handy for storage and project-building.
"Spdloader" <askforit@nospam.triad.rr.com> wrote in message news:46eb76ff$0$7511$4c368faf@roadrunner.com... > My house sits crossways on a hill. I have a garage door going into the > basement on the end. > > ......and, I drove it in there. |
Re: CJ7 Project for Sale
Cool, that must come in handy for storage and project-building.
"Spdloader" <askforit@nospam.triad.rr.com> wrote in message news:46eb76ff$0$7511$4c368faf@roadrunner.com... > My house sits crossways on a hill. I have a garage door going into the > basement on the end. > > ......and, I drove it in there. |
Re: CJ7 Project for Sale
Private sales are welcomed by the Charter.
That is a decent price for a parts vehicle, especially if it isn't rusted out. Too bad you are so far away and in a different country. I need a frame for mine in the worst way.... Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's - Gone to the rust pile... Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) Spdloader wrote: > First, let me say I hope I'm not violating any newsgroup charter with this, > but: > > I have a 1986 CJ-7 in my basement which is for sale in part or in whole. I > would rather sell it as a whole. > > It was gently rolled by my cousin, resulting in the hard top being > destroyed, and the left rear corner being crunched. > > It needs a hood, front grill, radiator, fan and left front fender. Left side > of windshield is bent a little, as is the window frame of the hard left > door. > > The engine is out and on an engine stand. Was going to restore, wife says > get it out. I lost the coin toss. > > Windshield glass is still fine. > > This was originally a 2.5 four cylinder vehicle, but converted to the 258 > six. > > It has a running 258 six, but it smokes and has timing chain slap noise, it > has a perfect condition 4spd manual I think it's an AX4, and a Dana 300 > transfer case. I believe it has a Dana 20 rear end, but not sure of the > front. It is original. > > It has relatively new custom driveshafts due to the engine swap. > > All lights and gauges work, even ones in the damaged front end, which has > been stripped of the damaged sheet metal. > > Interior is all there but front seats need to be recovered. > > Frame is straight with no rust. It has the original white spoke mag wheels, > the fifth (spare) is bent but there. > > It is an original NC vehicle, one owner, and belongs to my cousin, I am > selling it for him. > > It can be had as a whole for $700 bucks. I have clear title, still in my > cousins name. > > If anyone is interested, you can let me know and I'll answer any questions. > > Spdloader > > I can be reached at : > > spdloader > > at > > excite > > dot > > com > > > |
Re: CJ7 Project for Sale
Private sales are welcomed by the Charter.
That is a decent price for a parts vehicle, especially if it isn't rusted out. Too bad you are so far away and in a different country. I need a frame for mine in the worst way.... Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's - Gone to the rust pile... Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) Spdloader wrote: > First, let me say I hope I'm not violating any newsgroup charter with this, > but: > > I have a 1986 CJ-7 in my basement which is for sale in part or in whole. I > would rather sell it as a whole. > > It was gently rolled by my cousin, resulting in the hard top being > destroyed, and the left rear corner being crunched. > > It needs a hood, front grill, radiator, fan and left front fender. Left side > of windshield is bent a little, as is the window frame of the hard left > door. > > The engine is out and on an engine stand. Was going to restore, wife says > get it out. I lost the coin toss. > > Windshield glass is still fine. > > This was originally a 2.5 four cylinder vehicle, but converted to the 258 > six. > > It has a running 258 six, but it smokes and has timing chain slap noise, it > has a perfect condition 4spd manual I think it's an AX4, and a Dana 300 > transfer case. I believe it has a Dana 20 rear end, but not sure of the > front. It is original. > > It has relatively new custom driveshafts due to the engine swap. > > All lights and gauges work, even ones in the damaged front end, which has > been stripped of the damaged sheet metal. > > Interior is all there but front seats need to be recovered. > > Frame is straight with no rust. It has the original white spoke mag wheels, > the fifth (spare) is bent but there. > > It is an original NC vehicle, one owner, and belongs to my cousin, I am > selling it for him. > > It can be had as a whole for $700 bucks. I have clear title, still in my > cousins name. > > If anyone is interested, you can let me know and I'll answer any questions. > > Spdloader > > I can be reached at : > > spdloader > > at > > excite > > dot > > com > > > |
Re: CJ7 Project for Sale
Private sales are welcomed by the Charter.
That is a decent price for a parts vehicle, especially if it isn't rusted out. Too bad you are so far away and in a different country. I need a frame for mine in the worst way.... Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's - Gone to the rust pile... Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) Spdloader wrote: > First, let me say I hope I'm not violating any newsgroup charter with this, > but: > > I have a 1986 CJ-7 in my basement which is for sale in part or in whole. I > would rather sell it as a whole. > > It was gently rolled by my cousin, resulting in the hard top being > destroyed, and the left rear corner being crunched. > > It needs a hood, front grill, radiator, fan and left front fender. Left side > of windshield is bent a little, as is the window frame of the hard left > door. > > The engine is out and on an engine stand. Was going to restore, wife says > get it out. I lost the coin toss. > > Windshield glass is still fine. > > This was originally a 2.5 four cylinder vehicle, but converted to the 258 > six. > > It has a running 258 six, but it smokes and has timing chain slap noise, it > has a perfect condition 4spd manual I think it's an AX4, and a Dana 300 > transfer case. I believe it has a Dana 20 rear end, but not sure of the > front. It is original. > > It has relatively new custom driveshafts due to the engine swap. > > All lights and gauges work, even ones in the damaged front end, which has > been stripped of the damaged sheet metal. > > Interior is all there but front seats need to be recovered. > > Frame is straight with no rust. It has the original white spoke mag wheels, > the fifth (spare) is bent but there. > > It is an original NC vehicle, one owner, and belongs to my cousin, I am > selling it for him. > > It can be had as a whole for $700 bucks. I have clear title, still in my > cousins name. > > If anyone is interested, you can let me know and I'll answer any questions. > > Spdloader > > I can be reached at : > > spdloader > > at > > excite > > dot > > com > > > |
Re: CJ7 Project for Sale
Private sales are welcomed by the Charter.
That is a decent price for a parts vehicle, especially if it isn't rusted out. Too bad you are so far away and in a different country. I need a frame for mine in the worst way.... Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's - Gone to the rust pile... Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) Spdloader wrote: > First, let me say I hope I'm not violating any newsgroup charter with this, > but: > > I have a 1986 CJ-7 in my basement which is for sale in part or in whole. I > would rather sell it as a whole. > > It was gently rolled by my cousin, resulting in the hard top being > destroyed, and the left rear corner being crunched. > > It needs a hood, front grill, radiator, fan and left front fender. Left side > of windshield is bent a little, as is the window frame of the hard left > door. > > The engine is out and on an engine stand. Was going to restore, wife says > get it out. I lost the coin toss. > > Windshield glass is still fine. > > This was originally a 2.5 four cylinder vehicle, but converted to the 258 > six. > > It has a running 258 six, but it smokes and has timing chain slap noise, it > has a perfect condition 4spd manual I think it's an AX4, and a Dana 300 > transfer case. I believe it has a Dana 20 rear end, but not sure of the > front. It is original. > > It has relatively new custom driveshafts due to the engine swap. > > All lights and gauges work, even ones in the damaged front end, which has > been stripped of the damaged sheet metal. > > Interior is all there but front seats need to be recovered. > > Frame is straight with no rust. It has the original white spoke mag wheels, > the fifth (spare) is bent but there. > > It is an original NC vehicle, one owner, and belongs to my cousin, I am > selling it for him. > > It can be had as a whole for $700 bucks. I have clear title, still in my > cousins name. > > If anyone is interested, you can let me know and I'll answer any questions. > > Spdloader > > I can be reached at : > > spdloader > > at > > excite > > dot > > com > > > |
Re: CJ7 Project for Sale
"griffin" <gryffy@WEEEEshaw.ca> wrote in message news:zVTGi.178556$fJ5.105107@pd7urf1no... > Cool, that must come in handy for storage and project-building. > Yeah, it really does come in handy, but it also "catches" everything else that needs to be out of sight as well. Spdloader |
Re: CJ7 Project for Sale
"griffin" <gryffy@WEEEEshaw.ca> wrote in message news:zVTGi.178556$fJ5.105107@pd7urf1no... > Cool, that must come in handy for storage and project-building. > Yeah, it really does come in handy, but it also "catches" everything else that needs to be out of sight as well. Spdloader |
Re: CJ7 Project for Sale
"griffin" <gryffy@WEEEEshaw.ca> wrote in message news:zVTGi.178556$fJ5.105107@pd7urf1no... > Cool, that must come in handy for storage and project-building. > Yeah, it really does come in handy, but it also "catches" everything else that needs to be out of sight as well. Spdloader |
All times are GMT -4. The time now is 03:00 PM. |
© 2024 MH Sub I, LLC dba Internet Brands