CJ7: Engine stays on after I turn the key!?
#1
Guest
Posts: n/a
CJ7: Engine stays on after I turn the key!?
My engine keeps on running, and I therefore have to disconnect the
power/cable that powers to the MSD6 unit.
I have also tried to disconnect all the wires/plugs comming from the
steering column, but the engine is still running - so I'm pretty sure that
its not the key-switch.
When the engine/key is off, I still have 2.0 Volt in the above cable that
powers the MSD unit...?
Same result with hifi disonnected from battery.
Any ideas ?
Regards,
Thomas
CJ7 360, 1979
--
I am using the free version of SPAMfighter for private users.
It has removed 6379 spam emails to date.
Paying users do not have this message in their emails.
Try www.SPAMfighter.com for free now!
power/cable that powers to the MSD6 unit.
I have also tried to disconnect all the wires/plugs comming from the
steering column, but the engine is still running - so I'm pretty sure that
its not the key-switch.
When the engine/key is off, I still have 2.0 Volt in the above cable that
powers the MSD unit...?
Same result with hifi disonnected from battery.
Any ideas ?
Regards,
Thomas
CJ7 360, 1979
--
I am using the free version of SPAMfighter for private users.
It has removed 6379 spam emails to date.
Paying users do not have this message in their emails.
Try www.SPAMfighter.com for free now!
#2
Guest
Posts: n/a
Re: CJ7: Engine stays on after I turn the key!?
I may be a short in one of your starter solenoids' coil bypass,
disconnect it.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Thomas Pedersen wrote:
>
> My engine keeps on running, and I therefore have to disconnect the
> power/cable that powers to the MSD6 unit.
>
> I have also tried to disconnect all the wires/plugs comming from the
> steering column, but the engine is still running - so I'm pretty sure that
> its not the key-switch.
>
> When the engine/key is off, I still have 2.0 Volt in the above cable that
> powers the MSD unit...?
>
> Same result with hifi disonnected from battery.
>
> Any ideas ?
>
> Regards,
> Thomas
>
> CJ7 360, 1979
>
> --
> I am using the free version of SPAMfighter for private users.
> It has removed 6379 spam emails to date.
> Paying users do not have this message in their emails.
> Try www.SPAMfighter.com for free now!
disconnect it.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Thomas Pedersen wrote:
>
> My engine keeps on running, and I therefore have to disconnect the
> power/cable that powers to the MSD6 unit.
>
> I have also tried to disconnect all the wires/plugs comming from the
> steering column, but the engine is still running - so I'm pretty sure that
> its not the key-switch.
>
> When the engine/key is off, I still have 2.0 Volt in the above cable that
> powers the MSD unit...?
>
> Same result with hifi disonnected from battery.
>
> Any ideas ?
>
> Regards,
> Thomas
>
> CJ7 360, 1979
>
> --
> I am using the free version of SPAMfighter for private users.
> It has removed 6379 spam emails to date.
> Paying users do not have this message in their emails.
> Try www.SPAMfighter.com for free now!
#3
Guest
Posts: n/a
Re: CJ7: Engine stays on after I turn the key!?
I may be a short in one of your starter solenoids' coil bypass,
disconnect it.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Thomas Pedersen wrote:
>
> My engine keeps on running, and I therefore have to disconnect the
> power/cable that powers to the MSD6 unit.
>
> I have also tried to disconnect all the wires/plugs comming from the
> steering column, but the engine is still running - so I'm pretty sure that
> its not the key-switch.
>
> When the engine/key is off, I still have 2.0 Volt in the above cable that
> powers the MSD unit...?
>
> Same result with hifi disonnected from battery.
>
> Any ideas ?
>
> Regards,
> Thomas
>
> CJ7 360, 1979
>
> --
> I am using the free version of SPAMfighter for private users.
> It has removed 6379 spam emails to date.
> Paying users do not have this message in their emails.
> Try www.SPAMfighter.com for free now!
disconnect it.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Thomas Pedersen wrote:
>
> My engine keeps on running, and I therefore have to disconnect the
> power/cable that powers to the MSD6 unit.
>
> I have also tried to disconnect all the wires/plugs comming from the
> steering column, but the engine is still running - so I'm pretty sure that
> its not the key-switch.
>
> When the engine/key is off, I still have 2.0 Volt in the above cable that
> powers the MSD unit...?
>
> Same result with hifi disonnected from battery.
>
> Any ideas ?
>
> Regards,
> Thomas
>
> CJ7 360, 1979
>
> --
> I am using the free version of SPAMfighter for private users.
> It has removed 6379 spam emails to date.
> Paying users do not have this message in their emails.
> Try www.SPAMfighter.com for free now!
#4
Guest
Posts: n/a
Re: CJ7: Engine stays on after I turn the key!?
I may be a short in one of your starter solenoids' coil bypass,
disconnect it.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Thomas Pedersen wrote:
>
> My engine keeps on running, and I therefore have to disconnect the
> power/cable that powers to the MSD6 unit.
>
> I have also tried to disconnect all the wires/plugs comming from the
> steering column, but the engine is still running - so I'm pretty sure that
> its not the key-switch.
>
> When the engine/key is off, I still have 2.0 Volt in the above cable that
> powers the MSD unit...?
>
> Same result with hifi disonnected from battery.
>
> Any ideas ?
>
> Regards,
> Thomas
>
> CJ7 360, 1979
>
> --
> I am using the free version of SPAMfighter for private users.
> It has removed 6379 spam emails to date.
> Paying users do not have this message in their emails.
> Try www.SPAMfighter.com for free now!
disconnect it.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Thomas Pedersen wrote:
>
> My engine keeps on running, and I therefore have to disconnect the
> power/cable that powers to the MSD6 unit.
>
> I have also tried to disconnect all the wires/plugs comming from the
> steering column, but the engine is still running - so I'm pretty sure that
> its not the key-switch.
>
> When the engine/key is off, I still have 2.0 Volt in the above cable that
> powers the MSD unit...?
>
> Same result with hifi disonnected from battery.
>
> Any ideas ?
>
> Regards,
> Thomas
>
> CJ7 360, 1979
>
> --
> I am using the free version of SPAMfighter for private users.
> It has removed 6379 spam emails to date.
> Paying users do not have this message in their emails.
> Try www.SPAMfighter.com for free now!
#5
Guest
Posts: n/a
Re: CJ7: Engine stays on after I turn the key!?
I may be a short in one of your starter solenoids' coil bypass,
disconnect it.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Thomas Pedersen wrote:
>
> My engine keeps on running, and I therefore have to disconnect the
> power/cable that powers to the MSD6 unit.
>
> I have also tried to disconnect all the wires/plugs comming from the
> steering column, but the engine is still running - so I'm pretty sure that
> its not the key-switch.
>
> When the engine/key is off, I still have 2.0 Volt in the above cable that
> powers the MSD unit...?
>
> Same result with hifi disonnected from battery.
>
> Any ideas ?
>
> Regards,
> Thomas
>
> CJ7 360, 1979
>
> --
> I am using the free version of SPAMfighter for private users.
> It has removed 6379 spam emails to date.
> Paying users do not have this message in their emails.
> Try www.SPAMfighter.com for free now!
disconnect it.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Thomas Pedersen wrote:
>
> My engine keeps on running, and I therefore have to disconnect the
> power/cable that powers to the MSD6 unit.
>
> I have also tried to disconnect all the wires/plugs comming from the
> steering column, but the engine is still running - so I'm pretty sure that
> its not the key-switch.
>
> When the engine/key is off, I still have 2.0 Volt in the above cable that
> powers the MSD unit...?
>
> Same result with hifi disonnected from battery.
>
> Any ideas ?
>
> Regards,
> Thomas
>
> CJ7 360, 1979
>
> --
> I am using the free version of SPAMfighter for private users.
> It has removed 6379 spam emails to date.
> Paying users do not have this message in their emails.
> Try www.SPAMfighter.com for free now!
#6
Guest
Posts: n/a
Re: Engine stays on after I turn the key!?
Thomas Pedersen did pass the time by typing:
> My engine keeps on running, and I therefore have to disconnect the
> power/cable that powers to the MSD6 unit.
>
> I have also tried to disconnect all the wires/plugs comming from the
> steering column, but the engine is still running - so I'm pretty sure that
> its not the key-switch.
>
> When the engine/key is off, I still have 2.0 Volt in the above cable that
> powers the MSD unit...?
>
> Same result with hifi disonnected from battery.
>
> Any ideas ?
Yes, vist the MSD website http://www.msdignition.com/
and get the Ford Duraspark directions. Insert the diode
as directed and that will stop your runon problem.
--
DougW
> My engine keeps on running, and I therefore have to disconnect the
> power/cable that powers to the MSD6 unit.
>
> I have also tried to disconnect all the wires/plugs comming from the
> steering column, but the engine is still running - so I'm pretty sure that
> its not the key-switch.
>
> When the engine/key is off, I still have 2.0 Volt in the above cable that
> powers the MSD unit...?
>
> Same result with hifi disonnected from battery.
>
> Any ideas ?
Yes, vist the MSD website http://www.msdignition.com/
and get the Ford Duraspark directions. Insert the diode
as directed and that will stop your runon problem.
--
DougW
#7
Guest
Posts: n/a
Re: Engine stays on after I turn the key!?
Thomas Pedersen did pass the time by typing:
> My engine keeps on running, and I therefore have to disconnect the
> power/cable that powers to the MSD6 unit.
>
> I have also tried to disconnect all the wires/plugs comming from the
> steering column, but the engine is still running - so I'm pretty sure that
> its not the key-switch.
>
> When the engine/key is off, I still have 2.0 Volt in the above cable that
> powers the MSD unit...?
>
> Same result with hifi disonnected from battery.
>
> Any ideas ?
Yes, vist the MSD website http://www.msdignition.com/
and get the Ford Duraspark directions. Insert the diode
as directed and that will stop your runon problem.
--
DougW
> My engine keeps on running, and I therefore have to disconnect the
> power/cable that powers to the MSD6 unit.
>
> I have also tried to disconnect all the wires/plugs comming from the
> steering column, but the engine is still running - so I'm pretty sure that
> its not the key-switch.
>
> When the engine/key is off, I still have 2.0 Volt in the above cable that
> powers the MSD unit...?
>
> Same result with hifi disonnected from battery.
>
> Any ideas ?
Yes, vist the MSD website http://www.msdignition.com/
and get the Ford Duraspark directions. Insert the diode
as directed and that will stop your runon problem.
--
DougW
#8
Guest
Posts: n/a
Re: Engine stays on after I turn the key!?
Thomas Pedersen did pass the time by typing:
> My engine keeps on running, and I therefore have to disconnect the
> power/cable that powers to the MSD6 unit.
>
> I have also tried to disconnect all the wires/plugs comming from the
> steering column, but the engine is still running - so I'm pretty sure that
> its not the key-switch.
>
> When the engine/key is off, I still have 2.0 Volt in the above cable that
> powers the MSD unit...?
>
> Same result with hifi disonnected from battery.
>
> Any ideas ?
Yes, vist the MSD website http://www.msdignition.com/
and get the Ford Duraspark directions. Insert the diode
as directed and that will stop your runon problem.
--
DougW
> My engine keeps on running, and I therefore have to disconnect the
> power/cable that powers to the MSD6 unit.
>
> I have also tried to disconnect all the wires/plugs comming from the
> steering column, but the engine is still running - so I'm pretty sure that
> its not the key-switch.
>
> When the engine/key is off, I still have 2.0 Volt in the above cable that
> powers the MSD unit...?
>
> Same result with hifi disonnected from battery.
>
> Any ideas ?
Yes, vist the MSD website http://www.msdignition.com/
and get the Ford Duraspark directions. Insert the diode
as directed and that will stop your runon problem.
--
DougW
#9
Guest
Posts: n/a
Re: Engine stays on after I turn the key!?
Thomas Pedersen did pass the time by typing:
> My engine keeps on running, and I therefore have to disconnect the
> power/cable that powers to the MSD6 unit.
>
> I have also tried to disconnect all the wires/plugs comming from the
> steering column, but the engine is still running - so I'm pretty sure that
> its not the key-switch.
>
> When the engine/key is off, I still have 2.0 Volt in the above cable that
> powers the MSD unit...?
>
> Same result with hifi disonnected from battery.
>
> Any ideas ?
Yes, vist the MSD website http://www.msdignition.com/
and get the Ford Duraspark directions. Insert the diode
as directed and that will stop your runon problem.
--
DougW
> My engine keeps on running, and I therefore have to disconnect the
> power/cable that powers to the MSD6 unit.
>
> I have also tried to disconnect all the wires/plugs comming from the
> steering column, but the engine is still running - so I'm pretty sure that
> its not the key-switch.
>
> When the engine/key is off, I still have 2.0 Volt in the above cable that
> powers the MSD unit...?
>
> Same result with hifi disonnected from battery.
>
> Any ideas ?
Yes, vist the MSD website http://www.msdignition.com/
and get the Ford Duraspark directions. Insert the diode
as directed and that will stop your runon problem.
--
DougW
Thread
Thread Starter
Forum
Replies
Last Post
Richard J Kinch
Jeep Mailing List
8
07-23-2007 07:17 AM
Andrew
Jeep Mailing List
48
02-11-2004 04:04 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)