CJ5 misfires at high RPM/hard acceleration
07-16-2007, 03:18 PM
#51
Guest
Posts: n/a
Re: Re: CJ5 misfires at high RPM/hard acceleration
On Mon, 16 Jul 2007 10:15:36 -0400, Mike Romain <romainm@sympatico.ca>
wrote:
>'All' the old Jeep engines 'I' personally have seen (and read about
>'many') will 'NOT' run on Bosch platinum plugs.
>
>They foul up almost immediately.
>
>I would change those before doing anything else and put proper Champion
>truck plugs back into it.
Where do you get this BS at????? It is the wrong heat range that can
cause them to foul not the brand if heat range is correct. (some
brands to not cross reference properly) You have this guy chasing
plugs when this is very likely a fuel issue as I explained above. I
guess you just like to hear yourself talk so you can feel good about
yourself rather than really help him fix problem. I have been around
Jeep much much longer than you and owned AMC/Jeep V8's far longer than
you have even owned a Jeep. Just watch and read and you might just
learn something.
-----------------
TheSnoMan.com
wrote:
>'All' the old Jeep engines 'I' personally have seen (and read about
>'many') will 'NOT' run on Bosch platinum plugs.
>
>They foul up almost immediately.
>
>I would change those before doing anything else and put proper Champion
>truck plugs back into it.
Where do you get this BS at????? It is the wrong heat range that can
cause them to foul not the brand if heat range is correct. (some
brands to not cross reference properly) You have this guy chasing
plugs when this is very likely a fuel issue as I explained above. I
guess you just like to hear yourself talk so you can feel good about
yourself rather than really help him fix problem. I have been around
Jeep much much longer than you and owned AMC/Jeep V8's far longer than
you have even owned a Jeep. Just watch and read and you might just
learn something.
-----------------
TheSnoMan.com
07-16-2007, 03:18 PM
#52
Guest
Posts: n/a
Re: Re: CJ5 misfires at high RPM/hard acceleration
On Mon, 16 Jul 2007 10:15:36 -0400, Mike Romain <romainm@sympatico.ca>
wrote:
>'All' the old Jeep engines 'I' personally have seen (and read about
>'many') will 'NOT' run on Bosch platinum plugs.
>
>They foul up almost immediately.
>
>I would change those before doing anything else and put proper Champion
>truck plugs back into it.
Where do you get this BS at????? It is the wrong heat range that can
cause them to foul not the brand if heat range is correct. (some
brands to not cross reference properly) You have this guy chasing
plugs when this is very likely a fuel issue as I explained above. I
guess you just like to hear yourself talk so you can feel good about
yourself rather than really help him fix problem. I have been around
Jeep much much longer than you and owned AMC/Jeep V8's far longer than
you have even owned a Jeep. Just watch and read and you might just
learn something.
-----------------
TheSnoMan.com
wrote:
>'All' the old Jeep engines 'I' personally have seen (and read about
>'many') will 'NOT' run on Bosch platinum plugs.
>
>They foul up almost immediately.
>
>I would change those before doing anything else and put proper Champion
>truck plugs back into it.
Where do you get this BS at????? It is the wrong heat range that can
cause them to foul not the brand if heat range is correct. (some
brands to not cross reference properly) You have this guy chasing
plugs when this is very likely a fuel issue as I explained above. I
guess you just like to hear yourself talk so you can feel good about
yourself rather than really help him fix problem. I have been around
Jeep much much longer than you and owned AMC/Jeep V8's far longer than
you have even owned a Jeep. Just watch and read and you might just
learn something.
-----------------
TheSnoMan.com
07-16-2007, 03:18 PM
#53
Guest
Posts: n/a
Re: Re: CJ5 misfires at high RPM/hard acceleration
On Mon, 16 Jul 2007 10:15:36 -0400, Mike Romain <romainm@sympatico.ca>
wrote:
>'All' the old Jeep engines 'I' personally have seen (and read about
>'many') will 'NOT' run on Bosch platinum plugs.
>
>They foul up almost immediately.
>
>I would change those before doing anything else and put proper Champion
>truck plugs back into it.
Where do you get this BS at????? It is the wrong heat range that can
cause them to foul not the brand if heat range is correct. (some
brands to not cross reference properly) You have this guy chasing
plugs when this is very likely a fuel issue as I explained above. I
guess you just like to hear yourself talk so you can feel good about
yourself rather than really help him fix problem. I have been around
Jeep much much longer than you and owned AMC/Jeep V8's far longer than
you have even owned a Jeep. Just watch and read and you might just
learn something.
-----------------
TheSnoMan.com
wrote:
>'All' the old Jeep engines 'I' personally have seen (and read about
>'many') will 'NOT' run on Bosch platinum plugs.
>
>They foul up almost immediately.
>
>I would change those before doing anything else and put proper Champion
>truck plugs back into it.
Where do you get this BS at????? It is the wrong heat range that can
cause them to foul not the brand if heat range is correct. (some
brands to not cross reference properly) You have this guy chasing
plugs when this is very likely a fuel issue as I explained above. I
guess you just like to hear yourself talk so you can feel good about
yourself rather than really help him fix problem. I have been around
Jeep much much longer than you and owned AMC/Jeep V8's far longer than
you have even owned a Jeep. Just watch and read and you might just
learn something.
-----------------
TheSnoMan.com
07-16-2007, 03:21 PM
#54
Guest
Posts: n/a
Re: Re: CJ5 misfires at high RPM/hard acceleration
On Mon, 16 Jul 2007 11:31:37 -0400, Mike Romain <romainm@sympatico.ca>
wrote:
> Carbs adjust that for idle speed once the mix
>is set, TB's don't.
Actually you kinda set idle speed and mixture togehter because when
you change idle spped with a carb you change bleed air on plates and
idle circuit some and you some alwaysm recheck settings of idle
mixture after a idle speed change.
-----------------
TheSnoMan.com
wrote:
> Carbs adjust that for idle speed once the mix
>is set, TB's don't.
Actually you kinda set idle speed and mixture togehter because when
you change idle spped with a carb you change bleed air on plates and
idle circuit some and you some alwaysm recheck settings of idle
mixture after a idle speed change.
-----------------
TheSnoMan.com
07-16-2007, 03:21 PM
#55
Guest
Posts: n/a
Re: Re: CJ5 misfires at high RPM/hard acceleration
On Mon, 16 Jul 2007 11:31:37 -0400, Mike Romain <romainm@sympatico.ca>
wrote:
> Carbs adjust that for idle speed once the mix
>is set, TB's don't.
Actually you kinda set idle speed and mixture togehter because when
you change idle spped with a carb you change bleed air on plates and
idle circuit some and you some alwaysm recheck settings of idle
mixture after a idle speed change.
-----------------
TheSnoMan.com
wrote:
> Carbs adjust that for idle speed once the mix
>is set, TB's don't.
Actually you kinda set idle speed and mixture togehter because when
you change idle spped with a carb you change bleed air on plates and
idle circuit some and you some alwaysm recheck settings of idle
mixture after a idle speed change.
-----------------
TheSnoMan.com
07-16-2007, 03:21 PM
#56
Guest
Posts: n/a
Re: Re: CJ5 misfires at high RPM/hard acceleration
On Mon, 16 Jul 2007 11:31:37 -0400, Mike Romain <romainm@sympatico.ca>
wrote:
> Carbs adjust that for idle speed once the mix
>is set, TB's don't.
Actually you kinda set idle speed and mixture togehter because when
you change idle spped with a carb you change bleed air on plates and
idle circuit some and you some alwaysm recheck settings of idle
mixture after a idle speed change.
-----------------
TheSnoMan.com
wrote:
> Carbs adjust that for idle speed once the mix
>is set, TB's don't.
Actually you kinda set idle speed and mixture togehter because when
you change idle spped with a carb you change bleed air on plates and
idle circuit some and you some alwaysm recheck settings of idle
mixture after a idle speed change.
-----------------
TheSnoMan.com
07-16-2007, 03:21 PM
#57
Guest
Posts: n/a
Re: Re: CJ5 misfires at high RPM/hard acceleration
On Mon, 16 Jul 2007 11:31:37 -0400, Mike Romain <romainm@sympatico.ca>
wrote:
> Carbs adjust that for idle speed once the mix
>is set, TB's don't.
Actually you kinda set idle speed and mixture togehter because when
you change idle spped with a carb you change bleed air on plates and
idle circuit some and you some alwaysm recheck settings of idle
mixture after a idle speed change.
-----------------
TheSnoMan.com
wrote:
> Carbs adjust that for idle speed once the mix
>is set, TB's don't.
Actually you kinda set idle speed and mixture togehter because when
you change idle spped with a carb you change bleed air on plates and
idle circuit some and you some alwaysm recheck settings of idle
mixture after a idle speed change.
-----------------
TheSnoMan.com
07-16-2007, 03:41 PM
#58
Guest
Posts: n/a
Re: CJ5 misfires at high RPM/hard acceleration
SnoMan wrote:
> On Mon, 16 Jul 2007 10:15:36 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
>> 'All' the old Jeep engines 'I' personally have seen (and read about
>> 'many') will 'NOT' run on Bosch platinum plugs.
>>
>> They foul up almost immediately.
>>
>> I would change those before doing anything else and put proper Champion
>> truck plugs back into it.
>
> Where do you get this BS at?????
'I' actually have worked on Jeep engines and 'fixed' a whole bunch with
fouling Bosch plugs.
Lots of folks get suckered by the hype and change out the Champion plugs.
If you Google this group, you will find the the older Jeep engines will
'not' run on Bosch plugs, period.
It is well documented and a very common cause of fouling plugs.
It is also a very common topic on other groups that deal with American
engines.
Bosch might have the heat ranges totally screwed in their book for Jeep
engines, who knows, but they don't work.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
> On Mon, 16 Jul 2007 10:15:36 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
>> 'All' the old Jeep engines 'I' personally have seen (and read about
>> 'many') will 'NOT' run on Bosch platinum plugs.
>>
>> They foul up almost immediately.
>>
>> I would change those before doing anything else and put proper Champion
>> truck plugs back into it.
>
> Where do you get this BS at?????
'I' actually have worked on Jeep engines and 'fixed' a whole bunch with
fouling Bosch plugs.
Lots of folks get suckered by the hype and change out the Champion plugs.
If you Google this group, you will find the the older Jeep engines will
'not' run on Bosch plugs, period.
It is well documented and a very common cause of fouling plugs.
It is also a very common topic on other groups that deal with American
engines.
Bosch might have the heat ranges totally screwed in their book for Jeep
engines, who knows, but they don't work.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
07-16-2007, 03:41 PM
#59
Guest
Posts: n/a
Re: CJ5 misfires at high RPM/hard acceleration
SnoMan wrote:
> On Mon, 16 Jul 2007 10:15:36 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
>> 'All' the old Jeep engines 'I' personally have seen (and read about
>> 'many') will 'NOT' run on Bosch platinum plugs.
>>
>> They foul up almost immediately.
>>
>> I would change those before doing anything else and put proper Champion
>> truck plugs back into it.
>
> Where do you get this BS at?????
'I' actually have worked on Jeep engines and 'fixed' a whole bunch with
fouling Bosch plugs.
Lots of folks get suckered by the hype and change out the Champion plugs.
If you Google this group, you will find the the older Jeep engines will
'not' run on Bosch plugs, period.
It is well documented and a very common cause of fouling plugs.
It is also a very common topic on other groups that deal with American
engines.
Bosch might have the heat ranges totally screwed in their book for Jeep
engines, who knows, but they don't work.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
> On Mon, 16 Jul 2007 10:15:36 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
>> 'All' the old Jeep engines 'I' personally have seen (and read about
>> 'many') will 'NOT' run on Bosch platinum plugs.
>>
>> They foul up almost immediately.
>>
>> I would change those before doing anything else and put proper Champion
>> truck plugs back into it.
>
> Where do you get this BS at?????
'I' actually have worked on Jeep engines and 'fixed' a whole bunch with
fouling Bosch plugs.
Lots of folks get suckered by the hype and change out the Champion plugs.
If you Google this group, you will find the the older Jeep engines will
'not' run on Bosch plugs, period.
It is well documented and a very common cause of fouling plugs.
It is also a very common topic on other groups that deal with American
engines.
Bosch might have the heat ranges totally screwed in their book for Jeep
engines, who knows, but they don't work.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
07-16-2007, 03:41 PM
#60
Guest
Posts: n/a
Re: CJ5 misfires at high RPM/hard acceleration
SnoMan wrote:
> On Mon, 16 Jul 2007 10:15:36 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
>> 'All' the old Jeep engines 'I' personally have seen (and read about
>> 'many') will 'NOT' run on Bosch platinum plugs.
>>
>> They foul up almost immediately.
>>
>> I would change those before doing anything else and put proper Champion
>> truck plugs back into it.
>
> Where do you get this BS at?????
'I' actually have worked on Jeep engines and 'fixed' a whole bunch with
fouling Bosch plugs.
Lots of folks get suckered by the hype and change out the Champion plugs.
If you Google this group, you will find the the older Jeep engines will
'not' run on Bosch plugs, period.
It is well documented and a very common cause of fouling plugs.
It is also a very common topic on other groups that deal with American
engines.
Bosch might have the heat ranges totally screwed in their book for Jeep
engines, who knows, but they don't work.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
> On Mon, 16 Jul 2007 10:15:36 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
>> 'All' the old Jeep engines 'I' personally have seen (and read about
>> 'many') will 'NOT' run on Bosch platinum plugs.
>>
>> They foul up almost immediately.
>>
>> I would change those before doing anything else and put proper Champion
>> truck plugs back into it.
>
> Where do you get this BS at?????
'I' actually have worked on Jeep engines and 'fixed' a whole bunch with
fouling Bosch plugs.
Lots of folks get suckered by the hype and change out the Champion plugs.
If you Google this group, you will find the the older Jeep engines will
'not' run on Bosch plugs, period.
It is well documented and a very common cause of fouling plugs.
It is also a very common topic on other groups that deal with American
engines.
Bosch might have the heat ranges totally screwed in their book for Jeep
engines, who knows, but they don't work.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
