CJ / Wagoneer
#11
Guest
Posts: n/a
Re: CJ / Wagoneer
I guess you will have to call me a glutton. 90% of the idea is for the
axles. I don't want to go full width, and I don't want to bother with
cutting full lengths down to size, then coming up with custom axle shafts
now and if they break. That was the idea with the waggy axles. I am ok
with finding new 6 bolt rims, that is an easy one. I see full Wagoneers
going for $400 - $500 I was hoping that I could use the axles, maybe the
engine, and parting the rest if there is any value left.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:425ECC78.93224698@***.net...
> If you're thinking about a V8, pass go, go directly to Chevy,
> that's already sitting in at Civilian Jeep, and more than likely the
> upgraded axles, transmission and transfer will be in it, as the old
> stuff would have exploded with the first acceleration. You'll buy it ten
> cents on the dollar:
> http://search.ebay.com/cj-Jeep-V8_W0QQfkrZ1QQfromZR8
> If your glutton for punishment I'd reach back further for a Kaiser
> Wagoneer, Scout, or Blazer. Some links at:
> http://www.----------.com//jeep_bookmark.htm
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Rusted wrote:
>>
>> I am thinking about picking up an old 80's Wagoneer and using it for
>> donor
>> axles for my CJ-7. The axle swap sounds like it is pretty straight
>> forward.
>> Did they all come with D44's or were there any other axles used?
>> Anything
>> else on a Wagoneer that I need to consider, any other parts that are
>> worth
>> using? What engine / tranny / t-case options did they come with? My 258
>> engine with 215,000 is getting a little tired, maybe time for a rebuild
>> V8
>> from a Wagoneer if it would be an easy swap.
>>
>> Any feedback / comments? Thanks
axles. I don't want to go full width, and I don't want to bother with
cutting full lengths down to size, then coming up with custom axle shafts
now and if they break. That was the idea with the waggy axles. I am ok
with finding new 6 bolt rims, that is an easy one. I see full Wagoneers
going for $400 - $500 I was hoping that I could use the axles, maybe the
engine, and parting the rest if there is any value left.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:425ECC78.93224698@***.net...
> If you're thinking about a V8, pass go, go directly to Chevy,
> that's already sitting in at Civilian Jeep, and more than likely the
> upgraded axles, transmission and transfer will be in it, as the old
> stuff would have exploded with the first acceleration. You'll buy it ten
> cents on the dollar:
> http://search.ebay.com/cj-Jeep-V8_W0QQfkrZ1QQfromZR8
> If your glutton for punishment I'd reach back further for a Kaiser
> Wagoneer, Scout, or Blazer. Some links at:
> http://www.----------.com//jeep_bookmark.htm
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Rusted wrote:
>>
>> I am thinking about picking up an old 80's Wagoneer and using it for
>> donor
>> axles for my CJ-7. The axle swap sounds like it is pretty straight
>> forward.
>> Did they all come with D44's or were there any other axles used?
>> Anything
>> else on a Wagoneer that I need to consider, any other parts that are
>> worth
>> using? What engine / tranny / t-case options did they come with? My 258
>> engine with 215,000 is getting a little tired, maybe time for a rebuild
>> V8
>> from a Wagoneer if it would be an easy swap.
>>
>> Any feedback / comments? Thanks
#12
Guest
Posts: n/a
Re: CJ / Wagoneer
I guess you will have to call me a glutton. 90% of the idea is for the
axles. I don't want to go full width, and I don't want to bother with
cutting full lengths down to size, then coming up with custom axle shafts
now and if they break. That was the idea with the waggy axles. I am ok
with finding new 6 bolt rims, that is an easy one. I see full Wagoneers
going for $400 - $500 I was hoping that I could use the axles, maybe the
engine, and parting the rest if there is any value left.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:425ECC78.93224698@***.net...
> If you're thinking about a V8, pass go, go directly to Chevy,
> that's already sitting in at Civilian Jeep, and more than likely the
> upgraded axles, transmission and transfer will be in it, as the old
> stuff would have exploded with the first acceleration. You'll buy it ten
> cents on the dollar:
> http://search.ebay.com/cj-Jeep-V8_W0QQfkrZ1QQfromZR8
> If your glutton for punishment I'd reach back further for a Kaiser
> Wagoneer, Scout, or Blazer. Some links at:
> http://www.----------.com//jeep_bookmark.htm
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Rusted wrote:
>>
>> I am thinking about picking up an old 80's Wagoneer and using it for
>> donor
>> axles for my CJ-7. The axle swap sounds like it is pretty straight
>> forward.
>> Did they all come with D44's or were there any other axles used?
>> Anything
>> else on a Wagoneer that I need to consider, any other parts that are
>> worth
>> using? What engine / tranny / t-case options did they come with? My 258
>> engine with 215,000 is getting a little tired, maybe time for a rebuild
>> V8
>> from a Wagoneer if it would be an easy swap.
>>
>> Any feedback / comments? Thanks
axles. I don't want to go full width, and I don't want to bother with
cutting full lengths down to size, then coming up with custom axle shafts
now and if they break. That was the idea with the waggy axles. I am ok
with finding new 6 bolt rims, that is an easy one. I see full Wagoneers
going for $400 - $500 I was hoping that I could use the axles, maybe the
engine, and parting the rest if there is any value left.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:425ECC78.93224698@***.net...
> If you're thinking about a V8, pass go, go directly to Chevy,
> that's already sitting in at Civilian Jeep, and more than likely the
> upgraded axles, transmission and transfer will be in it, as the old
> stuff would have exploded with the first acceleration. You'll buy it ten
> cents on the dollar:
> http://search.ebay.com/cj-Jeep-V8_W0QQfkrZ1QQfromZR8
> If your glutton for punishment I'd reach back further for a Kaiser
> Wagoneer, Scout, or Blazer. Some links at:
> http://www.----------.com//jeep_bookmark.htm
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Rusted wrote:
>>
>> I am thinking about picking up an old 80's Wagoneer and using it for
>> donor
>> axles for my CJ-7. The axle swap sounds like it is pretty straight
>> forward.
>> Did they all come with D44's or were there any other axles used?
>> Anything
>> else on a Wagoneer that I need to consider, any other parts that are
>> worth
>> using? What engine / tranny / t-case options did they come with? My 258
>> engine with 215,000 is getting a little tired, maybe time for a rebuild
>> V8
>> from a Wagoneer if it would be an easy swap.
>>
>> Any feedback / comments? Thanks
#13
Guest
Posts: n/a
Re: CJ / Wagoneer
I guess you will have to call me a glutton. 90% of the idea is for the
axles. I don't want to go full width, and I don't want to bother with
cutting full lengths down to size, then coming up with custom axle shafts
now and if they break. That was the idea with the waggy axles. I am ok
with finding new 6 bolt rims, that is an easy one. I see full Wagoneers
going for $400 - $500 I was hoping that I could use the axles, maybe the
engine, and parting the rest if there is any value left.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:425ECC78.93224698@***.net...
> If you're thinking about a V8, pass go, go directly to Chevy,
> that's already sitting in at Civilian Jeep, and more than likely the
> upgraded axles, transmission and transfer will be in it, as the old
> stuff would have exploded with the first acceleration. You'll buy it ten
> cents on the dollar:
> http://search.ebay.com/cj-Jeep-V8_W0QQfkrZ1QQfromZR8
> If your glutton for punishment I'd reach back further for a Kaiser
> Wagoneer, Scout, or Blazer. Some links at:
> http://www.----------.com//jeep_bookmark.htm
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Rusted wrote:
>>
>> I am thinking about picking up an old 80's Wagoneer and using it for
>> donor
>> axles for my CJ-7. The axle swap sounds like it is pretty straight
>> forward.
>> Did they all come with D44's or were there any other axles used?
>> Anything
>> else on a Wagoneer that I need to consider, any other parts that are
>> worth
>> using? What engine / tranny / t-case options did they come with? My 258
>> engine with 215,000 is getting a little tired, maybe time for a rebuild
>> V8
>> from a Wagoneer if it would be an easy swap.
>>
>> Any feedback / comments? Thanks
axles. I don't want to go full width, and I don't want to bother with
cutting full lengths down to size, then coming up with custom axle shafts
now and if they break. That was the idea with the waggy axles. I am ok
with finding new 6 bolt rims, that is an easy one. I see full Wagoneers
going for $400 - $500 I was hoping that I could use the axles, maybe the
engine, and parting the rest if there is any value left.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:425ECC78.93224698@***.net...
> If you're thinking about a V8, pass go, go directly to Chevy,
> that's already sitting in at Civilian Jeep, and more than likely the
> upgraded axles, transmission and transfer will be in it, as the old
> stuff would have exploded with the first acceleration. You'll buy it ten
> cents on the dollar:
> http://search.ebay.com/cj-Jeep-V8_W0QQfkrZ1QQfromZR8
> If your glutton for punishment I'd reach back further for a Kaiser
> Wagoneer, Scout, or Blazer. Some links at:
> http://www.----------.com//jeep_bookmark.htm
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Rusted wrote:
>>
>> I am thinking about picking up an old 80's Wagoneer and using it for
>> donor
>> axles for my CJ-7. The axle swap sounds like it is pretty straight
>> forward.
>> Did they all come with D44's or were there any other axles used?
>> Anything
>> else on a Wagoneer that I need to consider, any other parts that are
>> worth
>> using? What engine / tranny / t-case options did they come with? My 258
>> engine with 215,000 is getting a little tired, maybe time for a rebuild
>> V8
>> from a Wagoneer if it would be an easy swap.
>>
>> Any feedback / comments? Thanks
Thread
Thread Starter
Forum
Replies
Last Post
Chris Taylor Jr
Jeep Mailing List
3
07-29-2003 06:58 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)