CJ spring perch ?
Guest
Posts: n/a
CJ spring perch ?
One of my spring perches on my AMC 20 rear end, 81 CJ7, has desintegrated,
so I checked around in town, the places I tried, NAPA for one, had no idea
what I was talking about, when they finally figured out what part I wanted
they said they had no idea were to even order them from. What you get for
living in a small town.
Anyway I ordered some M.O.R.E. spring perches online, very nice, 1/4"
steel, the right sized axle tube arc, but they are 7" long, compaired to the
stock CJ ones that are only 4" long. Does anyone see why this would make any
difference? Spring under if that matters.
Greg
so I checked around in town, the places I tried, NAPA for one, had no idea
what I was talking about, when they finally figured out what part I wanted
they said they had no idea were to even order them from. What you get for
living in a small town.
Anyway I ordered some M.O.R.E. spring perches online, very nice, 1/4"
steel, the right sized axle tube arc, but they are 7" long, compaired to the
stock CJ ones that are only 4" long. Does anyone see why this would make any
difference? Spring under if that matters.
Greg
Guest
Posts: n/a
Re: CJ spring perch ?
I believe that is to help with possible spring wrap. The longer pad
would be hard to torque far enough to bend springs.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
Greg wrote:
>
> One of my spring perches on my AMC 20 rear end, 81 CJ7, has desintegrated,
> so I checked around in town, the places I tried, NAPA for one, had no idea
> what I was talking about, when they finally figured out what part I wanted
> they said they had no idea were to even order them from. What you get for
> living in a small town.
> Anyway I ordered some M.O.R.E. spring perches online, very nice, 1/4"
> steel, the right sized axle tube arc, but they are 7" long, compaired to the
> stock CJ ones that are only 4" long. Does anyone see why this would make any
> difference? Spring under if that matters.
> Greg
would be hard to torque far enough to bend springs.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
Greg wrote:
>
> One of my spring perches on my AMC 20 rear end, 81 CJ7, has desintegrated,
> so I checked around in town, the places I tried, NAPA for one, had no idea
> what I was talking about, when they finally figured out what part I wanted
> they said they had no idea were to even order them from. What you get for
> living in a small town.
> Anyway I ordered some M.O.R.E. spring perches online, very nice, 1/4"
> steel, the right sized axle tube arc, but they are 7" long, compaired to the
> stock CJ ones that are only 4" long. Does anyone see why this would make any
> difference? Spring under if that matters.
> Greg
Guest
Posts: n/a
Re: CJ spring perch ?
I believe that is to help with possible spring wrap. The longer pad
would be hard to torque far enough to bend springs.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
Greg wrote:
>
> One of my spring perches on my AMC 20 rear end, 81 CJ7, has desintegrated,
> so I checked around in town, the places I tried, NAPA for one, had no idea
> what I was talking about, when they finally figured out what part I wanted
> they said they had no idea were to even order them from. What you get for
> living in a small town.
> Anyway I ordered some M.O.R.E. spring perches online, very nice, 1/4"
> steel, the right sized axle tube arc, but they are 7" long, compaired to the
> stock CJ ones that are only 4" long. Does anyone see why this would make any
> difference? Spring under if that matters.
> Greg
would be hard to torque far enough to bend springs.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
Greg wrote:
>
> One of my spring perches on my AMC 20 rear end, 81 CJ7, has desintegrated,
> so I checked around in town, the places I tried, NAPA for one, had no idea
> what I was talking about, when they finally figured out what part I wanted
> they said they had no idea were to even order them from. What you get for
> living in a small town.
> Anyway I ordered some M.O.R.E. spring perches online, very nice, 1/4"
> steel, the right sized axle tube arc, but they are 7" long, compaired to the
> stock CJ ones that are only 4" long. Does anyone see why this would make any
> difference? Spring under if that matters.
> Greg
Guest
Posts: n/a
Re: CJ spring perch ?
I believe that is to help with possible spring wrap. The longer pad
would be hard to torque far enough to bend springs.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
Greg wrote:
>
> One of my spring perches on my AMC 20 rear end, 81 CJ7, has desintegrated,
> so I checked around in town, the places I tried, NAPA for one, had no idea
> what I was talking about, when they finally figured out what part I wanted
> they said they had no idea were to even order them from. What you get for
> living in a small town.
> Anyway I ordered some M.O.R.E. spring perches online, very nice, 1/4"
> steel, the right sized axle tube arc, but they are 7" long, compaired to the
> stock CJ ones that are only 4" long. Does anyone see why this would make any
> difference? Spring under if that matters.
> Greg
would be hard to torque far enough to bend springs.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
Greg wrote:
>
> One of my spring perches on my AMC 20 rear end, 81 CJ7, has desintegrated,
> so I checked around in town, the places I tried, NAPA for one, had no idea
> what I was talking about, when they finally figured out what part I wanted
> they said they had no idea were to even order them from. What you get for
> living in a small town.
> Anyway I ordered some M.O.R.E. spring perches online, very nice, 1/4"
> steel, the right sized axle tube arc, but they are 7" long, compaired to the
> stock CJ ones that are only 4" long. Does anyone see why this would make any
> difference? Spring under if that matters.
> Greg
Guest
Posts: n/a
Re: CJ spring perch ?
Ditto.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> I believe that is to help with possible spring wrap. The longer pad
> would be hard to torque far enough to bend springs.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Aug./05 http://www.imagestation.com/album/in...?id=2120343242
> (More Off Road album links at bottom of the view page)
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> I believe that is to help with possible spring wrap. The longer pad
> would be hard to torque far enough to bend springs.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Aug./05 http://www.imagestation.com/album/in...?id=2120343242
> (More Off Road album links at bottom of the view page)
Guest
Posts: n/a
Re: CJ spring perch ?
Ditto.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> I believe that is to help with possible spring wrap. The longer pad
> would be hard to torque far enough to bend springs.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Aug./05 http://www.imagestation.com/album/in...?id=2120343242
> (More Off Road album links at bottom of the view page)
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> I believe that is to help with possible spring wrap. The longer pad
> would be hard to torque far enough to bend springs.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Aug./05 http://www.imagestation.com/album/in...?id=2120343242
> (More Off Road album links at bottom of the view page)
Guest
Posts: n/a
Re: CJ spring perch ?
Ditto.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> I believe that is to help with possible spring wrap. The longer pad
> would be hard to torque far enough to bend springs.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Aug./05 http://www.imagestation.com/album/in...?id=2120343242
> (More Off Road album links at bottom of the view page)
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> I believe that is to help with possible spring wrap. The longer pad
> would be hard to torque far enough to bend springs.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Aug./05 http://www.imagestation.com/album/in...?id=2120343242
> (More Off Road album links at bottom of the view page)
Guest
Posts: n/a
Re: CJ spring perch ?
Thanks guys, that's what I needed to here.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:439775B5.F0A4E0BB@***.net...
> Ditto.
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Mike Romain wrote:
>>
>> I believe that is to help with possible spring wrap. The longer pad
>> would be hard to torque far enough to bend springs.
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>> Canadian Off Road Trips Photos: Non members can still view!
>> Aug./05 http://www.imagestation.com/album/in...?id=2120343242
>> (More Off Road album links at bottom of the view page)
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:439775B5.F0A4E0BB@***.net...
> Ditto.
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Mike Romain wrote:
>>
>> I believe that is to help with possible spring wrap. The longer pad
>> would be hard to torque far enough to bend springs.
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>> Canadian Off Road Trips Photos: Non members can still view!
>> Aug./05 http://www.imagestation.com/album/in...?id=2120343242
>> (More Off Road album links at bottom of the view page)
Guest
Posts: n/a
Re: CJ spring perch ?
Thanks guys, that's what I needed to here.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:439775B5.F0A4E0BB@***.net...
> Ditto.
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Mike Romain wrote:
>>
>> I believe that is to help with possible spring wrap. The longer pad
>> would be hard to torque far enough to bend springs.
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>> Canadian Off Road Trips Photos: Non members can still view!
>> Aug./05 http://www.imagestation.com/album/in...?id=2120343242
>> (More Off Road album links at bottom of the view page)
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:439775B5.F0A4E0BB@***.net...
> Ditto.
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Mike Romain wrote:
>>
>> I believe that is to help with possible spring wrap. The longer pad
>> would be hard to torque far enough to bend springs.
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>> Canadian Off Road Trips Photos: Non members can still view!
>> Aug./05 http://www.imagestation.com/album/in...?id=2120343242
>> (More Off Road album links at bottom of the view page)
Guest
Posts: n/a
Re: CJ spring perch ?
Thanks guys, that's what I needed to here.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:439775B5.F0A4E0BB@***.net...
> Ditto.
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Mike Romain wrote:
>>
>> I believe that is to help with possible spring wrap. The longer pad
>> would be hard to torque far enough to bend springs.
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>> Canadian Off Road Trips Photos: Non members can still view!
>> Aug./05 http://www.imagestation.com/album/in...?id=2120343242
>> (More Off Road album links at bottom of the view page)
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:439775B5.F0A4E0BB@***.net...
> Ditto.
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Mike Romain wrote:
>>
>> I believe that is to help with possible spring wrap. The longer pad
>> would be hard to torque far enough to bend springs.
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>> Canadian Off Road Trips Photos: Non members can still view!
>> Aug./05 http://www.imagestation.com/album/in...?id=2120343242
>> (More Off Road album links at bottom of the view page)
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
