dtperk

My loss is your gain. I'm regretably getting out of the jeep life. I have
a completely rebuilt 82 CJ-7 that
has been rolled. The jeep needs a body tub, windshield mask/glass, right
front fender and a stock radiator.
Everything else is perfect.

I have over 13K in parts and materials into this jeep and hundreds of hours
of work. EVERYTHING was replaced
during the rebuild from gas/brake lines, to dash lights. For someone
looking for a project, or that has a
project that needs parts, this is the jeep for you.

I do have a running chevy 305, SM465 with D20/Novak setup that will go with
the setup. All extra parts and
accessories will go also... hardtop, extra doors, spare rim, trail gear,
etc.

I would like to only entertain offers on the whole kit and cabootle. If
someone doesn't want the whole thing,
then I will entertain parting it all out.

The reason for selling is two fold... I was almost killed in the rollover;
second, There's a good possiblity
that my wife and I will be moving next summer and I don't want to have to
move everything. Location is near
Akron, Ohio (44256) . You come pickup with trailer.

Email for pictures or more info. See the page on the Jeep-L:
http://www.jeep-l.net/perkinsd.htm
I'm asking $4800/OBO for EVERYTHING.
Email: dtperk2@hotmail.com

-------------------------------------------------------
Engine:(rebuilt 7/99)
Weber 32/36 DGES Carb
York Onboard Air setup with 3 gallon reserve tank
Borla Header
GM HEI ignition
Four Wheel Hardware aluminum valve cover

Drive Train
T-4 Transmission (rebuilt)
Dana 300 xfer case (rebuilt)
Front: Dana 30 [4.10 / Powertrax Lock Right]
Rear : AMC 20 w/Moser one piece axles [4.10 / ARB Welded Axle Tubes]
All Spicer U-joints (including D30 inner axle)
33"x12.5" BFGoodrich Mud Terrains on White Wagon Wheels-Only 20% worn.
Warn Premium front Hub Conversion

Chassis
Frame: Sandblasted, POR-15 & Chassis Black
Suspension: Skyjacker Softride® 2.5 in. lift; 3/8" Shackle lift; 1" Body
lift
Slickrock front spring hangers
Rancho 5000 Shocks and steering stabilizer
Currie Greasable Front Tow Shackles with Currie Tow Bar
ProComp® Steering box brace
Electrical: Replacement OEM wiring harness by Painless Wiring
KC HiLites "46" Series Fog lights
Prothane Polyeurothane bushings, boots and mounts (incl. engine and tranny)
AGR Power Steering gear box (17:1)
Goodrich® Stainless steel extended brake lines, Front and Rear
Smittybuilt Nerf Bars

Body
Four Wheel Hardware fiberglass tub, fenders and hood
Original steel grille and windshield frame
Stainless Steel (Kentrol ) diff. covers; hinges and dash accessories
Replacement OEM fender flares
Herculined Tub and wheel wells
Paint: Sherwin Williams Ford Red

Interior
Stainless Steel dash
Trailmax Sport front seats
Supertop & two piece soft doors
Classic Bikini Top
Tuffy Deluxe Secure Center Console
Pioneer Cassette deck
Cobra CB (18 WX ST)
Radio Shack Steel Whip CB antenna (rear cross-member mount)