CJ Nerf bars: Was welding question
01-16-2004, 08:32 AM
#11
Guest
Posts: n/a
Re: CJ Nerf bars: Was welding question
I can take some pictures tonight and post. I didn't install mine (there
when I bought the Jeep), so I'm not sure how, but they are bolted on. You
don't want to bolt all the way through the frame unless you use spacers to
keep the frame from collapsing.
--
JimG
80' CJ-7, 258 CID
35" BFG MT's on 15x10 Centerlines
4.56 D30-D44 SOA
D300 w/4:1 & Currie twin sticks
Warn 8000i w/dual batteries
LockRight F&R
"Allen" <abanks1@columbus.rr.com> wrote in message
news:TQINb.9480$f97.1052@fe3.columbus.rr.com...
> Anyone have pictures of a nerf bar bolted to a CJ frame? I installed a set
> of new ones on my 2001 Ranger and of course it bolted up to existing holes
> in the frame. Are there holes in the CJ frame for this?? It's too damn
cold
> for me to trek out to my jeep tonight. And IF I have to drill new
> holes...what is the best way to get a nut on the back of the bolts?!?
They'd
> almost have to go clear through to the other side of the frame wouldn't
> they?!?
> Allen
> 83 CJ7
>
>
>
when I bought the Jeep), so I'm not sure how, but they are bolted on. You
don't want to bolt all the way through the frame unless you use spacers to
keep the frame from collapsing.
--
JimG
80' CJ-7, 258 CID
35" BFG MT's on 15x10 Centerlines
4.56 D30-D44 SOA
D300 w/4:1 & Currie twin sticks
Warn 8000i w/dual batteries
LockRight F&R
"Allen" <abanks1@columbus.rr.com> wrote in message
news:TQINb.9480$f97.1052@fe3.columbus.rr.com...
> Anyone have pictures of a nerf bar bolted to a CJ frame? I installed a set
> of new ones on my 2001 Ranger and of course it bolted up to existing holes
> in the frame. Are there holes in the CJ frame for this?? It's too damn
cold
> for me to trek out to my jeep tonight. And IF I have to drill new
> holes...what is the best way to get a nut on the back of the bolts?!?
They'd
> almost have to go clear through to the other side of the frame wouldn't
> they?!?
> Allen
> 83 CJ7
>
>
>
01-16-2004, 08:32 AM
#12
Guest
Posts: n/a
Re: CJ Nerf bars: Was welding question
I can take some pictures tonight and post. I didn't install mine (there
when I bought the Jeep), so I'm not sure how, but they are bolted on. You
don't want to bolt all the way through the frame unless you use spacers to
keep the frame from collapsing.
--
JimG
80' CJ-7, 258 CID
35" BFG MT's on 15x10 Centerlines
4.56 D30-D44 SOA
D300 w/4:1 & Currie twin sticks
Warn 8000i w/dual batteries
LockRight F&R
"Allen" <abanks1@columbus.rr.com> wrote in message
news:TQINb.9480$f97.1052@fe3.columbus.rr.com...
> Anyone have pictures of a nerf bar bolted to a CJ frame? I installed a set
> of new ones on my 2001 Ranger and of course it bolted up to existing holes
> in the frame. Are there holes in the CJ frame for this?? It's too damn
cold
> for me to trek out to my jeep tonight. And IF I have to drill new
> holes...what is the best way to get a nut on the back of the bolts?!?
They'd
> almost have to go clear through to the other side of the frame wouldn't
> they?!?
> Allen
> 83 CJ7
>
>
>
when I bought the Jeep), so I'm not sure how, but they are bolted on. You
don't want to bolt all the way through the frame unless you use spacers to
keep the frame from collapsing.
--
JimG
80' CJ-7, 258 CID
35" BFG MT's on 15x10 Centerlines
4.56 D30-D44 SOA
D300 w/4:1 & Currie twin sticks
Warn 8000i w/dual batteries
LockRight F&R
"Allen" <abanks1@columbus.rr.com> wrote in message
news:TQINb.9480$f97.1052@fe3.columbus.rr.com...
> Anyone have pictures of a nerf bar bolted to a CJ frame? I installed a set
> of new ones on my 2001 Ranger and of course it bolted up to existing holes
> in the frame. Are there holes in the CJ frame for this?? It's too damn
cold
> for me to trek out to my jeep tonight. And IF I have to drill new
> holes...what is the best way to get a nut on the back of the bolts?!?
They'd
> almost have to go clear through to the other side of the frame wouldn't
> they?!?
> Allen
> 83 CJ7
>
>
>
01-16-2004, 08:32 AM
#13
Guest
Posts: n/a
Re: CJ Nerf bars: Was welding question
I can take some pictures tonight and post. I didn't install mine (there
when I bought the Jeep), so I'm not sure how, but they are bolted on. You
don't want to bolt all the way through the frame unless you use spacers to
keep the frame from collapsing.
--
JimG
80' CJ-7, 258 CID
35" BFG MT's on 15x10 Centerlines
4.56 D30-D44 SOA
D300 w/4:1 & Currie twin sticks
Warn 8000i w/dual batteries
LockRight F&R
"Allen" <abanks1@columbus.rr.com> wrote in message
news:TQINb.9480$f97.1052@fe3.columbus.rr.com...
> Anyone have pictures of a nerf bar bolted to a CJ frame? I installed a set
> of new ones on my 2001 Ranger and of course it bolted up to existing holes
> in the frame. Are there holes in the CJ frame for this?? It's too damn
cold
> for me to trek out to my jeep tonight. And IF I have to drill new
> holes...what is the best way to get a nut on the back of the bolts?!?
They'd
> almost have to go clear through to the other side of the frame wouldn't
> they?!?
> Allen
> 83 CJ7
>
>
>
when I bought the Jeep), so I'm not sure how, but they are bolted on. You
don't want to bolt all the way through the frame unless you use spacers to
keep the frame from collapsing.
--
JimG
80' CJ-7, 258 CID
35" BFG MT's on 15x10 Centerlines
4.56 D30-D44 SOA
D300 w/4:1 & Currie twin sticks
Warn 8000i w/dual batteries
LockRight F&R
"Allen" <abanks1@columbus.rr.com> wrote in message
news:TQINb.9480$f97.1052@fe3.columbus.rr.com...
> Anyone have pictures of a nerf bar bolted to a CJ frame? I installed a set
> of new ones on my 2001 Ranger and of course it bolted up to existing holes
> in the frame. Are there holes in the CJ frame for this?? It's too damn
cold
> for me to trek out to my jeep tonight. And IF I have to drill new
> holes...what is the best way to get a nut on the back of the bolts?!?
They'd
> almost have to go clear through to the other side of the frame wouldn't
> they?!?
> Allen
> 83 CJ7
>
>
>
01-16-2004, 02:30 PM
#14
Guest
Posts: n/a
Re: CJ Nerf bars: Was welding question
You may want to consider what you are planning to do with your jeep. That
is, if you are going rock crawling these might be a hinderance. If it's
just a dd or street or even light 4x4 then it will be ok. Some experienced
rock crawlers can give a better reply.
bill
"Allen" <abanks1@columbus.rr.com> wrote in message
news:TQINb.9480$f97.1052@fe3.columbus.rr.com...
> Anyone have pictures of a nerf bar bolted to a CJ frame? I installed a set
> of new ones on my 2001 Ranger and of course it bolted up to existing holes
> in the frame. Are there holes in the CJ frame for this?? It's too damn
cold
> for me to trek out to my jeep tonight. And IF I have to drill new
> holes...what is the best way to get a nut on the back of the bolts?!?
They'd
> almost have to go clear through to the other side of the frame wouldn't
> they?!?
> Allen
> 83 CJ7
>
>
>
is, if you are going rock crawling these might be a hinderance. If it's
just a dd or street or even light 4x4 then it will be ok. Some experienced
rock crawlers can give a better reply.
bill
"Allen" <abanks1@columbus.rr.com> wrote in message
news:TQINb.9480$f97.1052@fe3.columbus.rr.com...
> Anyone have pictures of a nerf bar bolted to a CJ frame? I installed a set
> of new ones on my 2001 Ranger and of course it bolted up to existing holes
> in the frame. Are there holes in the CJ frame for this?? It's too damn
cold
> for me to trek out to my jeep tonight. And IF I have to drill new
> holes...what is the best way to get a nut on the back of the bolts?!?
They'd
> almost have to go clear through to the other side of the frame wouldn't
> they?!?
> Allen
> 83 CJ7
>
>
>
01-16-2004, 02:30 PM
#15
Guest
Posts: n/a
Re: CJ Nerf bars: Was welding question
You may want to consider what you are planning to do with your jeep. That
is, if you are going rock crawling these might be a hinderance. If it's
just a dd or street or even light 4x4 then it will be ok. Some experienced
rock crawlers can give a better reply.
bill
"Allen" <abanks1@columbus.rr.com> wrote in message
news:TQINb.9480$f97.1052@fe3.columbus.rr.com...
> Anyone have pictures of a nerf bar bolted to a CJ frame? I installed a set
> of new ones on my 2001 Ranger and of course it bolted up to existing holes
> in the frame. Are there holes in the CJ frame for this?? It's too damn
cold
> for me to trek out to my jeep tonight. And IF I have to drill new
> holes...what is the best way to get a nut on the back of the bolts?!?
They'd
> almost have to go clear through to the other side of the frame wouldn't
> they?!?
> Allen
> 83 CJ7
>
>
>
is, if you are going rock crawling these might be a hinderance. If it's
just a dd or street or even light 4x4 then it will be ok. Some experienced
rock crawlers can give a better reply.
bill
"Allen" <abanks1@columbus.rr.com> wrote in message
news:TQINb.9480$f97.1052@fe3.columbus.rr.com...
> Anyone have pictures of a nerf bar bolted to a CJ frame? I installed a set
> of new ones on my 2001 Ranger and of course it bolted up to existing holes
> in the frame. Are there holes in the CJ frame for this?? It's too damn
cold
> for me to trek out to my jeep tonight. And IF I have to drill new
> holes...what is the best way to get a nut on the back of the bolts?!?
They'd
> almost have to go clear through to the other side of the frame wouldn't
> they?!?
> Allen
> 83 CJ7
>
>
>
01-16-2004, 02:30 PM
#16
Guest
Posts: n/a
Re: CJ Nerf bars: Was welding question
You may want to consider what you are planning to do with your jeep. That
is, if you are going rock crawling these might be a hinderance. If it's
just a dd or street or even light 4x4 then it will be ok. Some experienced
rock crawlers can give a better reply.
bill
"Allen" <abanks1@columbus.rr.com> wrote in message
news:TQINb.9480$f97.1052@fe3.columbus.rr.com...
> Anyone have pictures of a nerf bar bolted to a CJ frame? I installed a set
> of new ones on my 2001 Ranger and of course it bolted up to existing holes
> in the frame. Are there holes in the CJ frame for this?? It's too damn
cold
> for me to trek out to my jeep tonight. And IF I have to drill new
> holes...what is the best way to get a nut on the back of the bolts?!?
They'd
> almost have to go clear through to the other side of the frame wouldn't
> they?!?
> Allen
> 83 CJ7
>
>
>
is, if you are going rock crawling these might be a hinderance. If it's
just a dd or street or even light 4x4 then it will be ok. Some experienced
rock crawlers can give a better reply.
bill
"Allen" <abanks1@columbus.rr.com> wrote in message
news:TQINb.9480$f97.1052@fe3.columbus.rr.com...
> Anyone have pictures of a nerf bar bolted to a CJ frame? I installed a set
> of new ones on my 2001 Ranger and of course it bolted up to existing holes
> in the frame. Are there holes in the CJ frame for this?? It's too damn
cold
> for me to trek out to my jeep tonight. And IF I have to drill new
> holes...what is the best way to get a nut on the back of the bolts?!?
They'd
> almost have to go clear through to the other side of the frame wouldn't
> they?!?
> Allen
> 83 CJ7
>
>
>
01-16-2004, 03:18 PM
#17
Guest
Posts: n/a
Re: CJ Nerf bars: Was welding question
Strictly a toy...no serious long term off road,..but I do get out every once
in a while.
Allen
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:bu9dr8$f92rm$1@ID-193866.news.uni-berlin.de...
> You may want to consider what you are planning to do with your jeep. That
> is, if you are going rock crawling these might be a hinderance. If it's
> just a dd or street or even light 4x4 then it will be ok. Some
experienced
> rock crawlers can give a better reply.
>
> bill
>
> "Allen" <abanks1@columbus.rr.com> wrote in message
> news:TQINb.9480$f97.1052@fe3.columbus.rr.com...
> > Anyone have pictures of a nerf bar bolted to a CJ frame? I installed a
set
> > of new ones on my 2001 Ranger and of course it bolted up to existing
holes
> > in the frame. Are there holes in the CJ frame for this?? It's too damn
> cold
> > for me to trek out to my jeep tonight. And IF I have to drill new
> > holes...what is the best way to get a nut on the back of the bolts?!?
> They'd
> > almost have to go clear through to the other side of the frame wouldn't
> > they?!?
> > Allen
> > 83 CJ7
> >
> >
> >
>
>
in a while.
Allen
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:bu9dr8$f92rm$1@ID-193866.news.uni-berlin.de...
> You may want to consider what you are planning to do with your jeep. That
> is, if you are going rock crawling these might be a hinderance. If it's
> just a dd or street or even light 4x4 then it will be ok. Some
experienced
> rock crawlers can give a better reply.
>
> bill
>
> "Allen" <abanks1@columbus.rr.com> wrote in message
> news:TQINb.9480$f97.1052@fe3.columbus.rr.com...
> > Anyone have pictures of a nerf bar bolted to a CJ frame? I installed a
set
> > of new ones on my 2001 Ranger and of course it bolted up to existing
holes
> > in the frame. Are there holes in the CJ frame for this?? It's too damn
> cold
> > for me to trek out to my jeep tonight. And IF I have to drill new
> > holes...what is the best way to get a nut on the back of the bolts?!?
> They'd
> > almost have to go clear through to the other side of the frame wouldn't
> > they?!?
> > Allen
> > 83 CJ7
> >
> >
> >
>
>
01-16-2004, 03:18 PM
#18
Guest
Posts: n/a
Re: CJ Nerf bars: Was welding question
Strictly a toy...no serious long term off road,..but I do get out every once
in a while.
Allen
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:bu9dr8$f92rm$1@ID-193866.news.uni-berlin.de...
> You may want to consider what you are planning to do with your jeep. That
> is, if you are going rock crawling these might be a hinderance. If it's
> just a dd or street or even light 4x4 then it will be ok. Some
experienced
> rock crawlers can give a better reply.
>
> bill
>
> "Allen" <abanks1@columbus.rr.com> wrote in message
> news:TQINb.9480$f97.1052@fe3.columbus.rr.com...
> > Anyone have pictures of a nerf bar bolted to a CJ frame? I installed a
set
> > of new ones on my 2001 Ranger and of course it bolted up to existing
holes
> > in the frame. Are there holes in the CJ frame for this?? It's too damn
> cold
> > for me to trek out to my jeep tonight. And IF I have to drill new
> > holes...what is the best way to get a nut on the back of the bolts?!?
> They'd
> > almost have to go clear through to the other side of the frame wouldn't
> > they?!?
> > Allen
> > 83 CJ7
> >
> >
> >
>
>
in a while.
Allen
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:bu9dr8$f92rm$1@ID-193866.news.uni-berlin.de...
> You may want to consider what you are planning to do with your jeep. That
> is, if you are going rock crawling these might be a hinderance. If it's
> just a dd or street or even light 4x4 then it will be ok. Some
experienced
> rock crawlers can give a better reply.
>
> bill
>
> "Allen" <abanks1@columbus.rr.com> wrote in message
> news:TQINb.9480$f97.1052@fe3.columbus.rr.com...
> > Anyone have pictures of a nerf bar bolted to a CJ frame? I installed a
set
> > of new ones on my 2001 Ranger and of course it bolted up to existing
holes
> > in the frame. Are there holes in the CJ frame for this?? It's too damn
> cold
> > for me to trek out to my jeep tonight. And IF I have to drill new
> > holes...what is the best way to get a nut on the back of the bolts?!?
> They'd
> > almost have to go clear through to the other side of the frame wouldn't
> > they?!?
> > Allen
> > 83 CJ7
> >
> >
> >
>
>
01-16-2004, 03:18 PM
#19
Guest
Posts: n/a
Re: CJ Nerf bars: Was welding question
Strictly a toy...no serious long term off road,..but I do get out every once
in a while.
Allen
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:bu9dr8$f92rm$1@ID-193866.news.uni-berlin.de...
> You may want to consider what you are planning to do with your jeep. That
> is, if you are going rock crawling these might be a hinderance. If it's
> just a dd or street or even light 4x4 then it will be ok. Some
experienced
> rock crawlers can give a better reply.
>
> bill
>
> "Allen" <abanks1@columbus.rr.com> wrote in message
> news:TQINb.9480$f97.1052@fe3.columbus.rr.com...
> > Anyone have pictures of a nerf bar bolted to a CJ frame? I installed a
set
> > of new ones on my 2001 Ranger and of course it bolted up to existing
holes
> > in the frame. Are there holes in the CJ frame for this?? It's too damn
> cold
> > for me to trek out to my jeep tonight. And IF I have to drill new
> > holes...what is the best way to get a nut on the back of the bolts?!?
> They'd
> > almost have to go clear through to the other side of the frame wouldn't
> > they?!?
> > Allen
> > 83 CJ7
> >
> >
> >
>
>
in a while.
Allen
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:bu9dr8$f92rm$1@ID-193866.news.uni-berlin.de...
> You may want to consider what you are planning to do with your jeep. That
> is, if you are going rock crawling these might be a hinderance. If it's
> just a dd or street or even light 4x4 then it will be ok. Some
experienced
> rock crawlers can give a better reply.
>
> bill
>
> "Allen" <abanks1@columbus.rr.com> wrote in message
> news:TQINb.9480$f97.1052@fe3.columbus.rr.com...
> > Anyone have pictures of a nerf bar bolted to a CJ frame? I installed a
set
> > of new ones on my 2001 Ranger and of course it bolted up to existing
holes
> > in the frame. Are there holes in the CJ frame for this?? It's too damn
> cold
> > for me to trek out to my jeep tonight. And IF I have to drill new
> > holes...what is the best way to get a nut on the back of the bolts?!?
> They'd
> > almost have to go clear through to the other side of the frame wouldn't
> > they?!?
> > Allen
> > 83 CJ7
> >
> >
> >
>
>
01-16-2004, 04:17 PM
#20
Guest
Posts: n/a
Re: CJ Nerf bars: Was welding question
There are several types of boulder bars that work (and look) much better
than Nerfs. Nerf bars are for looks only, they rob ground clearance and
frequently get torn off if they hit on anything. Take a look at Sun
Performance and BoulderBars for some ideas on products that work WAY BETTER
than Nerfs.
"Allen" <abanks1@columbus.rr.com> wrote in message
news:TQINb.9480$f97.1052@fe3.columbus.rr.com...
> Anyone have pictures of a nerf bar bolted to a CJ frame? I installed a set
> of new ones on my 2001 Ranger and of course it bolted up to existing holes
> in the frame. Are there holes in the CJ frame for this?? It's too damn
cold
> for me to trek out to my jeep tonight. And IF I have to drill new
> holes...what is the best way to get a nut on the back of the bolts?!?
They'd
> almost have to go clear through to the other side of the frame wouldn't
> they?!?
> Allen
> 83 CJ7
>
>
>
than Nerfs. Nerf bars are for looks only, they rob ground clearance and
frequently get torn off if they hit on anything. Take a look at Sun
Performance and BoulderBars for some ideas on products that work WAY BETTER
than Nerfs.
"Allen" <abanks1@columbus.rr.com> wrote in message
news:TQINb.9480$f97.1052@fe3.columbus.rr.com...
> Anyone have pictures of a nerf bar bolted to a CJ frame? I installed a set
> of new ones on my 2001 Ranger and of course it bolted up to existing holes
> in the frame. Are there holes in the CJ frame for this?? It's too damn
cold
> for me to trek out to my jeep tonight. And IF I have to drill new
> holes...what is the best way to get a nut on the back of the bolts?!?
They'd
> almost have to go clear through to the other side of the frame wouldn't
> they?!?
> Allen
> 83 CJ7
>
>
>
