CJ mirrors on a YJ
#41
Guest
Posts: n/a
Re: CJ mirrors on a YJ
"Poe" <Poe34@mail.com> wrote in message
news:2gUye.6794$Ud.812833@news20.bellglobal.com...
> Jeff Strickland wrote:
> > It works good.
> >
> > WORD TO THE WISE, get your mirrors and mirror arms from the dealership,
DO
> > NOT get the cheap imitations that Steel-----s sells.
> >
> >
> >
> >
> >
> >
> > "Poe" <Poe34@mail.com> wrote in message
> > news:Tajye.3571$Ud.388870@news20.bellglobal.com...
> >
> >>I'm thinking about mounting CJ side mirrors on my 89 YJ. Has anyone done
> >>this? Any advice would be appreciated. Thanks. I have been doing some
> >>body work on the YJ and I got rid of the door mounted mirrors so I need
> >>another solution.
> >>
> >>
> >>POE
> >
> >
> >
> Will they mount to the stock windshield hindges or will I need to drill
> mounting holes?
No drilling necessary. The YJ hinge is the same one as the CJ. At least the
very early YJ -- yours -- is the same as the CJ.
#42
Guest
Posts: n/a
Re: CJ mirrors on a YJ
"Earle Horton" <earle-NOSPAM-horton@msn.com> wrote in message
news:1120672596.dcb79096f4f5ac9350faf413847debe3@t eranews...
> "Poe" <Poe34@mail.com> wrote in message
> news:2gUye.6794$Ud.812833@news20.bellglobal.com...
> ...
> > Will they mount to the stock windshield hindges or will I need
> > to drill mounting holes?
> >
> > Thanks
>
> For YJ hinges, you will need to drill and tap mounting holes. Use a drill
> press, a good bit, and a high quality tap. Hole location is going to be
> tricky, unless you can get a good drawing of a CJ hinge.
>
I thought the early YJ and the CJ used the same hinge.
I get it, there are extra holes inthe CJ hinge that the YJ hinge hasn't got.
The CJ hinge can be used on the YJ, but the YJ hinge needs holes added to
support the mirrors. DUH!
#43
Guest
Posts: n/a
Re: CJ mirrors on a YJ
"Earle Horton" <earle-NOSPAM-horton@msn.com> wrote in message
news:1120672596.dcb79096f4f5ac9350faf413847debe3@t eranews...
> "Poe" <Poe34@mail.com> wrote in message
> news:2gUye.6794$Ud.812833@news20.bellglobal.com...
> ...
> > Will they mount to the stock windshield hindges or will I need
> > to drill mounting holes?
> >
> > Thanks
>
> For YJ hinges, you will need to drill and tap mounting holes. Use a drill
> press, a good bit, and a high quality tap. Hole location is going to be
> tricky, unless you can get a good drawing of a CJ hinge.
>
I thought the early YJ and the CJ used the same hinge.
I get it, there are extra holes inthe CJ hinge that the YJ hinge hasn't got.
The CJ hinge can be used on the YJ, but the YJ hinge needs holes added to
support the mirrors. DUH!
#44
Guest
Posts: n/a
Re: CJ mirrors on a YJ
"Earle Horton" <earle-NOSPAM-horton@msn.com> wrote in message
news:1120672596.dcb79096f4f5ac9350faf413847debe3@t eranews...
> "Poe" <Poe34@mail.com> wrote in message
> news:2gUye.6794$Ud.812833@news20.bellglobal.com...
> ...
> > Will they mount to the stock windshield hindges or will I need
> > to drill mounting holes?
> >
> > Thanks
>
> For YJ hinges, you will need to drill and tap mounting holes. Use a drill
> press, a good bit, and a high quality tap. Hole location is going to be
> tricky, unless you can get a good drawing of a CJ hinge.
>
I thought the early YJ and the CJ used the same hinge.
I get it, there are extra holes inthe CJ hinge that the YJ hinge hasn't got.
The CJ hinge can be used on the YJ, but the YJ hinge needs holes added to
support the mirrors. DUH!
#45
Guest
Posts: n/a
Re: CJ mirrors on a YJ
"Earle Horton" <earle-NOSPAM-horton@msn.com> wrote in message
news:1120672596.dcb79096f4f5ac9350faf413847debe3@t eranews...
> "Poe" <Poe34@mail.com> wrote in message
> news:2gUye.6794$Ud.812833@news20.bellglobal.com...
> ...
> > Will they mount to the stock windshield hindges or will I need
> > to drill mounting holes?
> >
> > Thanks
>
> For YJ hinges, you will need to drill and tap mounting holes. Use a drill
> press, a good bit, and a high quality tap. Hole location is going to be
> tricky, unless you can get a good drawing of a CJ hinge.
>
I thought the early YJ and the CJ used the same hinge.
I get it, there are extra holes inthe CJ hinge that the YJ hinge hasn't got.
The CJ hinge can be used on the YJ, but the YJ hinge needs holes added to
support the mirrors. DUH!
#46
Guest
Posts: n/a
Re: CJ mirrors on a YJ
"Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
news:VvudnQHiJ8i9vlHfRVn-tg@ez2.net...
>
....
>
> I get it, there are extra holes inthe CJ hinge that the YJ hinge
> hasn't got. The CJ hinge can be used on the YJ, but the
> YJ hinge needs holes added to support the mirrors. DUH!
>
>
Try to keep a steady hand while tapping it, too. That hinge is really quite
thin and needs all the threads it can get!
Earle
news:VvudnQHiJ8i9vlHfRVn-tg@ez2.net...
>
....
>
> I get it, there are extra holes inthe CJ hinge that the YJ hinge
> hasn't got. The CJ hinge can be used on the YJ, but the
> YJ hinge needs holes added to support the mirrors. DUH!
>
>
Try to keep a steady hand while tapping it, too. That hinge is really quite
thin and needs all the threads it can get!
Earle
#47
Guest
Posts: n/a
Re: CJ mirrors on a YJ
"Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
news:VvudnQHiJ8i9vlHfRVn-tg@ez2.net...
>
....
>
> I get it, there are extra holes inthe CJ hinge that the YJ hinge
> hasn't got. The CJ hinge can be used on the YJ, but the
> YJ hinge needs holes added to support the mirrors. DUH!
>
>
Try to keep a steady hand while tapping it, too. That hinge is really quite
thin and needs all the threads it can get!
Earle
news:VvudnQHiJ8i9vlHfRVn-tg@ez2.net...
>
....
>
> I get it, there are extra holes inthe CJ hinge that the YJ hinge
> hasn't got. The CJ hinge can be used on the YJ, but the
> YJ hinge needs holes added to support the mirrors. DUH!
>
>
Try to keep a steady hand while tapping it, too. That hinge is really quite
thin and needs all the threads it can get!
Earle
#48
Guest
Posts: n/a
Re: CJ mirrors on a YJ
"Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
news:VvudnQHiJ8i9vlHfRVn-tg@ez2.net...
>
....
>
> I get it, there are extra holes inthe CJ hinge that the YJ hinge
> hasn't got. The CJ hinge can be used on the YJ, but the
> YJ hinge needs holes added to support the mirrors. DUH!
>
>
Try to keep a steady hand while tapping it, too. That hinge is really quite
thin and needs all the threads it can get!
Earle
news:VvudnQHiJ8i9vlHfRVn-tg@ez2.net...
>
....
>
> I get it, there are extra holes inthe CJ hinge that the YJ hinge
> hasn't got. The CJ hinge can be used on the YJ, but the
> YJ hinge needs holes added to support the mirrors. DUH!
>
>
Try to keep a steady hand while tapping it, too. That hinge is really quite
thin and needs all the threads it can get!
Earle
#49
Guest
Posts: n/a
Re: CJ mirrors on a YJ
"Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
news:VvudnQHiJ8i9vlHfRVn-tg@ez2.net...
>
....
>
> I get it, there are extra holes inthe CJ hinge that the YJ hinge
> hasn't got. The CJ hinge can be used on the YJ, but the
> YJ hinge needs holes added to support the mirrors. DUH!
>
>
Try to keep a steady hand while tapping it, too. That hinge is really quite
thin and needs all the threads it can get!
Earle
news:VvudnQHiJ8i9vlHfRVn-tg@ez2.net...
>
....
>
> I get it, there are extra holes inthe CJ hinge that the YJ hinge
> hasn't got. The CJ hinge can be used on the YJ, but the
> YJ hinge needs holes added to support the mirrors. DUH!
>
>
Try to keep a steady hand while tapping it, too. That hinge is really quite
thin and needs all the threads it can get!
Earle
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)