Heh heh, I didn't dare ask him yet....

My frame was snapped in half on the drivers side behind the front spring
and he did a major patch there for a decent price. He had to cut off
the body mount and the brake combination valve and the spring hanger

I am thinking on less than $100.00 per side for the rears which is
allowing for an hour and a half labor each.

Put it this way, I will be happy if it costs no more than that and not
put out if it is even 1/3 more.

Mike

"Kevin S." wrote:
>
> Did they charge you an arm and a leg or was it fairly reasonable? I know
> your prices are canadian, but I'm hoping to at least get a ballpark idea
> before I trailer it down there.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:40D85F0A.BE55EDBB@sympatico.ca...
> > Mine is rotten back there too.
> >
> > I found a shop that will put a piece of square tube over the last 8" or
> > so and put the hangers and rear cross member onto them.

 

Heh heh, I didn't dare ask him yet....

My frame was snapped in half on the drivers side behind the front spring
and he did a major patch there for a decent price. He had to cut off
the body mount and the brake combination valve and the spring hanger

I am thinking on less than $100.00 per side for the rears which is
allowing for an hour and a half labor each.

Put it this way, I will be happy if it costs no more than that and not
put out if it is even 1/3 more.

Mike

"Kevin S." wrote:
>
> Did they charge you an arm and a leg or was it fairly reasonable? I know
> your prices are canadian, but I'm hoping to at least get a ballpark idea
> before I trailer it down there.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:40D85F0A.BE55EDBB@sympatico.ca...
> > Mine is rotten back there too.
> >
> > I found a shop that will put a piece of square tube over the last 8" or
> > so and put the hangers and rear cross member onto them.

 

Heh heh, I didn't dare ask him yet....

My frame was snapped in half on the drivers side behind the front spring
and he did a major patch there for a decent price. He had to cut off
the body mount and the brake combination valve and the spring hanger

I am thinking on less than $100.00 per side for the rears which is
allowing for an hour and a half labor each.

Put it this way, I will be happy if it costs no more than that and not
put out if it is even 1/3 more.

Mike

"Kevin S." wrote:
>
> Did they charge you an arm and a leg or was it fairly reasonable? I know
> your prices are canadian, but I'm hoping to at least get a ballpark idea
> before I trailer it down there.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:40D85F0A.BE55EDBB@sympatico.ca...
> > Mine is rotten back there too.
> >
> > I found a shop that will put a piece of square tube over the last 8" or
> > so and put the hangers and rear cross member onto them.