CJ-7 Springs
06-09-2004, 05:07 PM
#1
Guest
Posts: n/a
CJ-7 Springs
My 1986 CJ is my daily driver, therefore I am still running the stock
suspension with 31" tires. My tie rod ends are shot, as are the shackle
bushings. I placed an order for replacement parts today. My (original)
springs are pretty flat, the bump stop is only 1 3/8" from the axle. I
called a spring shop in town and they will re- arch them for $35.00 per
spring. That is a whole lot cheaper than buying new springs. Does anyone
know how far the bump stop is supposed to be from the axle? Will I then be
able to fit some BFG 32" tires under there, after having them re-arched?
TIA
suspension with 31" tires. My tie rod ends are shot, as are the shackle
bushings. I placed an order for replacement parts today. My (original)
springs are pretty flat, the bump stop is only 1 3/8" from the axle. I
called a spring shop in town and they will re- arch them for $35.00 per
spring. That is a whole lot cheaper than buying new springs. Does anyone
know how far the bump stop is supposed to be from the axle? Will I then be
able to fit some BFG 32" tires under there, after having them re-arched?
TIA
06-09-2004, 05:35 PM
#2
Guest
Posts: n/a
Re: CJ-7 Springs
My first question would be how long would re-arching springs last. Seems to
me that once a metal has been compromised it will never be the same no
matter what you do to it. Just my thoughts.
BTW, where are you located? I have some 2 1/2" lift springs just collecting
leafs in the backyard.
Bill
"RoyDMercer" <bdickerson@gbtrealty.com> wrote in message
news:10ceuv8jl8mvac1@corp.supernews.com...
> My 1986 CJ is my daily driver, therefore I am still running the stock
> suspension with 31" tires. My tie rod ends are shot, as are the shackle
> bushings. I placed an order for replacement parts today. My (original)
> springs are pretty flat, the bump stop is only 1 3/8" from the axle. I
> called a spring shop in town and they will re- arch them for $35.00 per
> spring. That is a whole lot cheaper than buying new springs. Does anyone
> know how far the bump stop is supposed to be from the axle? Will I then
be
> able to fit some BFG 32" tires under there, after having them re-arched?
> TIA
>
>
me that once a metal has been compromised it will never be the same no
matter what you do to it. Just my thoughts.
BTW, where are you located? I have some 2 1/2" lift springs just collecting
leafs in the backyard.
Bill
"RoyDMercer" <bdickerson@gbtrealty.com> wrote in message
news:10ceuv8jl8mvac1@corp.supernews.com...
> My 1986 CJ is my daily driver, therefore I am still running the stock
> suspension with 31" tires. My tie rod ends are shot, as are the shackle
> bushings. I placed an order for replacement parts today. My (original)
> springs are pretty flat, the bump stop is only 1 3/8" from the axle. I
> called a spring shop in town and they will re- arch them for $35.00 per
> spring. That is a whole lot cheaper than buying new springs. Does anyone
> know how far the bump stop is supposed to be from the axle? Will I then
be
> able to fit some BFG 32" tires under there, after having them re-arched?
> TIA
>
>
06-09-2004, 05:35 PM
#3
Guest
Posts: n/a
Re: CJ-7 Springs
My first question would be how long would re-arching springs last. Seems to
me that once a metal has been compromised it will never be the same no
matter what you do to it. Just my thoughts.
BTW, where are you located? I have some 2 1/2" lift springs just collecting
leafs in the backyard.
Bill
"RoyDMercer" <bdickerson@gbtrealty.com> wrote in message
news:10ceuv8jl8mvac1@corp.supernews.com...
> My 1986 CJ is my daily driver, therefore I am still running the stock
> suspension with 31" tires. My tie rod ends are shot, as are the shackle
> bushings. I placed an order for replacement parts today. My (original)
> springs are pretty flat, the bump stop is only 1 3/8" from the axle. I
> called a spring shop in town and they will re- arch them for $35.00 per
> spring. That is a whole lot cheaper than buying new springs. Does anyone
> know how far the bump stop is supposed to be from the axle? Will I then
be
> able to fit some BFG 32" tires under there, after having them re-arched?
> TIA
>
>
me that once a metal has been compromised it will never be the same no
matter what you do to it. Just my thoughts.
BTW, where are you located? I have some 2 1/2" lift springs just collecting
leafs in the backyard.
Bill
"RoyDMercer" <bdickerson@gbtrealty.com> wrote in message
news:10ceuv8jl8mvac1@corp.supernews.com...
> My 1986 CJ is my daily driver, therefore I am still running the stock
> suspension with 31" tires. My tie rod ends are shot, as are the shackle
> bushings. I placed an order for replacement parts today. My (original)
> springs are pretty flat, the bump stop is only 1 3/8" from the axle. I
> called a spring shop in town and they will re- arch them for $35.00 per
> spring. That is a whole lot cheaper than buying new springs. Does anyone
> know how far the bump stop is supposed to be from the axle? Will I then
be
> able to fit some BFG 32" tires under there, after having them re-arched?
> TIA
>
>
06-09-2004, 05:35 PM
#4
Guest
Posts: n/a
Re: CJ-7 Springs
My first question would be how long would re-arching springs last. Seems to
me that once a metal has been compromised it will never be the same no
matter what you do to it. Just my thoughts.
BTW, where are you located? I have some 2 1/2" lift springs just collecting
leafs in the backyard.
Bill
"RoyDMercer" <bdickerson@gbtrealty.com> wrote in message
news:10ceuv8jl8mvac1@corp.supernews.com...
> My 1986 CJ is my daily driver, therefore I am still running the stock
> suspension with 31" tires. My tie rod ends are shot, as are the shackle
> bushings. I placed an order for replacement parts today. My (original)
> springs are pretty flat, the bump stop is only 1 3/8" from the axle. I
> called a spring shop in town and they will re- arch them for $35.00 per
> spring. That is a whole lot cheaper than buying new springs. Does anyone
> know how far the bump stop is supposed to be from the axle? Will I then
be
> able to fit some BFG 32" tires under there, after having them re-arched?
> TIA
>
>
me that once a metal has been compromised it will never be the same no
matter what you do to it. Just my thoughts.
BTW, where are you located? I have some 2 1/2" lift springs just collecting
leafs in the backyard.
Bill
"RoyDMercer" <bdickerson@gbtrealty.com> wrote in message
news:10ceuv8jl8mvac1@corp.supernews.com...
> My 1986 CJ is my daily driver, therefore I am still running the stock
> suspension with 31" tires. My tie rod ends are shot, as are the shackle
> bushings. I placed an order for replacement parts today. My (original)
> springs are pretty flat, the bump stop is only 1 3/8" from the axle. I
> called a spring shop in town and they will re- arch them for $35.00 per
> spring. That is a whole lot cheaper than buying new springs. Does anyone
> know how far the bump stop is supposed to be from the axle? Will I then
be
> able to fit some BFG 32" tires under there, after having them re-arched?
> TIA
>
>
06-09-2004, 05:35 PM
#5
Guest
Posts: n/a
Re: CJ-7 Springs
My first question would be how long would re-arching springs last. Seems to
me that once a metal has been compromised it will never be the same no
matter what you do to it. Just my thoughts.
BTW, where are you located? I have some 2 1/2" lift springs just collecting
leafs in the backyard.
Bill
"RoyDMercer" <bdickerson@gbtrealty.com> wrote in message
news:10ceuv8jl8mvac1@corp.supernews.com...
> My 1986 CJ is my daily driver, therefore I am still running the stock
> suspension with 31" tires. My tie rod ends are shot, as are the shackle
> bushings. I placed an order for replacement parts today. My (original)
> springs are pretty flat, the bump stop is only 1 3/8" from the axle. I
> called a spring shop in town and they will re- arch them for $35.00 per
> spring. That is a whole lot cheaper than buying new springs. Does anyone
> know how far the bump stop is supposed to be from the axle? Will I then
be
> able to fit some BFG 32" tires under there, after having them re-arched?
> TIA
>
>
me that once a metal has been compromised it will never be the same no
matter what you do to it. Just my thoughts.
BTW, where are you located? I have some 2 1/2" lift springs just collecting
leafs in the backyard.
Bill
"RoyDMercer" <bdickerson@gbtrealty.com> wrote in message
news:10ceuv8jl8mvac1@corp.supernews.com...
> My 1986 CJ is my daily driver, therefore I am still running the stock
> suspension with 31" tires. My tie rod ends are shot, as are the shackle
> bushings. I placed an order for replacement parts today. My (original)
> springs are pretty flat, the bump stop is only 1 3/8" from the axle. I
> called a spring shop in town and they will re- arch them for $35.00 per
> spring. That is a whole lot cheaper than buying new springs. Does anyone
> know how far the bump stop is supposed to be from the axle? Will I then
be
> able to fit some BFG 32" tires under there, after having them re-arched?
> TIA
>
>
06-09-2004, 07:06 PM
#6
Guest
Posts: n/a
Re: CJ-7 Springs
You might want to stick with 31" for the most articulation:
http://www.----------.com/tireSizeFit.pdf without buying new springs and
longer shocks, and moving their mounts and extending the bump stops to
protect them. The stock length shocks:
http://www.monroe.com/catalog_lookup...=1986&LST=3375
are 8.5" travel front 7.5" rear:
http://www.monroe.com/pdf/ShockAbsor...sionCharts.pdf so re-arcing
may increase the ride height by four of those inches, making you look
cool without sending too much.
God Bless America, ßill O|||||||O
mailto:--------------------
RoyDMercer wrote:
>
> My 1986 CJ is my daily driver, therefore I am still running the stock
> suspension with 31" tires. My tie rod ends are shot, as are the shackle
> bushings. I placed an order for replacement parts today. My (original)
> springs are pretty flat, the bump stop is only 1 3/8" from the axle. I
> called a spring shop in town and they will re- arch them for $35.00 per
> spring. That is a whole lot cheaper than buying new springs. Does anyone
> know how far the bump stop is supposed to be from the axle? Will I then be
> able to fit some BFG 32" tires under there, after having them re-arched?
> TIA
http://www.----------.com/tireSizeFit.pdf without buying new springs and
longer shocks, and moving their mounts and extending the bump stops to
protect them. The stock length shocks:
http://www.monroe.com/catalog_lookup...=1986&LST=3375
are 8.5" travel front 7.5" rear:
http://www.monroe.com/pdf/ShockAbsor...sionCharts.pdf so re-arcing
may increase the ride height by four of those inches, making you look
cool without sending too much.
God Bless America, ßill O|||||||O
mailto:--------------------
RoyDMercer wrote:
>
> My 1986 CJ is my daily driver, therefore I am still running the stock
> suspension with 31" tires. My tie rod ends are shot, as are the shackle
> bushings. I placed an order for replacement parts today. My (original)
> springs are pretty flat, the bump stop is only 1 3/8" from the axle. I
> called a spring shop in town and they will re- arch them for $35.00 per
> spring. That is a whole lot cheaper than buying new springs. Does anyone
> know how far the bump stop is supposed to be from the axle? Will I then be
> able to fit some BFG 32" tires under there, after having them re-arched?
> TIA
06-09-2004, 07:06 PM
#7
Guest
Posts: n/a
Re: CJ-7 Springs
You might want to stick with 31" for the most articulation:
http://www.----------.com/tireSizeFit.pdf without buying new springs and
longer shocks, and moving their mounts and extending the bump stops to
protect them. The stock length shocks:
http://www.monroe.com/catalog_lookup...=1986&LST=3375
are 8.5" travel front 7.5" rear:
http://www.monroe.com/pdf/ShockAbsor...sionCharts.pdf so re-arcing
may increase the ride height by four of those inches, making you look
cool without sending too much.
God Bless America, ßill O|||||||O
mailto:--------------------
RoyDMercer wrote:
>
> My 1986 CJ is my daily driver, therefore I am still running the stock
> suspension with 31" tires. My tie rod ends are shot, as are the shackle
> bushings. I placed an order for replacement parts today. My (original)
> springs are pretty flat, the bump stop is only 1 3/8" from the axle. I
> called a spring shop in town and they will re- arch them for $35.00 per
> spring. That is a whole lot cheaper than buying new springs. Does anyone
> know how far the bump stop is supposed to be from the axle? Will I then be
> able to fit some BFG 32" tires under there, after having them re-arched?
> TIA
http://www.----------.com/tireSizeFit.pdf without buying new springs and
longer shocks, and moving their mounts and extending the bump stops to
protect them. The stock length shocks:
http://www.monroe.com/catalog_lookup...=1986&LST=3375
are 8.5" travel front 7.5" rear:
http://www.monroe.com/pdf/ShockAbsor...sionCharts.pdf so re-arcing
may increase the ride height by four of those inches, making you look
cool without sending too much.
God Bless America, ßill O|||||||O
mailto:--------------------
RoyDMercer wrote:
>
> My 1986 CJ is my daily driver, therefore I am still running the stock
> suspension with 31" tires. My tie rod ends are shot, as are the shackle
> bushings. I placed an order for replacement parts today. My (original)
> springs are pretty flat, the bump stop is only 1 3/8" from the axle. I
> called a spring shop in town and they will re- arch them for $35.00 per
> spring. That is a whole lot cheaper than buying new springs. Does anyone
> know how far the bump stop is supposed to be from the axle? Will I then be
> able to fit some BFG 32" tires under there, after having them re-arched?
> TIA
06-09-2004, 07:06 PM
#8
Guest
Posts: n/a
Re: CJ-7 Springs
You might want to stick with 31" for the most articulation:
http://www.----------.com/tireSizeFit.pdf without buying new springs and
longer shocks, and moving their mounts and extending the bump stops to
protect them. The stock length shocks:
http://www.monroe.com/catalog_lookup...=1986&LST=3375
are 8.5" travel front 7.5" rear:
http://www.monroe.com/pdf/ShockAbsor...sionCharts.pdf so re-arcing
may increase the ride height by four of those inches, making you look
cool without sending too much.
God Bless America, ßill O|||||||O
mailto:--------------------
RoyDMercer wrote:
>
> My 1986 CJ is my daily driver, therefore I am still running the stock
> suspension with 31" tires. My tie rod ends are shot, as are the shackle
> bushings. I placed an order for replacement parts today. My (original)
> springs are pretty flat, the bump stop is only 1 3/8" from the axle. I
> called a spring shop in town and they will re- arch them for $35.00 per
> spring. That is a whole lot cheaper than buying new springs. Does anyone
> know how far the bump stop is supposed to be from the axle? Will I then be
> able to fit some BFG 32" tires under there, after having them re-arched?
> TIA
http://www.----------.com/tireSizeFit.pdf without buying new springs and
longer shocks, and moving their mounts and extending the bump stops to
protect them. The stock length shocks:
http://www.monroe.com/catalog_lookup...=1986&LST=3375
are 8.5" travel front 7.5" rear:
http://www.monroe.com/pdf/ShockAbsor...sionCharts.pdf so re-arcing
may increase the ride height by four of those inches, making you look
cool without sending too much.
God Bless America, ßill O|||||||O
mailto:--------------------
RoyDMercer wrote:
>
> My 1986 CJ is my daily driver, therefore I am still running the stock
> suspension with 31" tires. My tie rod ends are shot, as are the shackle
> bushings. I placed an order for replacement parts today. My (original)
> springs are pretty flat, the bump stop is only 1 3/8" from the axle. I
> called a spring shop in town and they will re- arch them for $35.00 per
> spring. That is a whole lot cheaper than buying new springs. Does anyone
> know how far the bump stop is supposed to be from the axle? Will I then be
> able to fit some BFG 32" tires under there, after having them re-arched?
> TIA
06-09-2004, 07:06 PM
#9
Guest
Posts: n/a
Re: CJ-7 Springs
You might want to stick with 31" for the most articulation:
http://www.----------.com/tireSizeFit.pdf without buying new springs and
longer shocks, and moving their mounts and extending the bump stops to
protect them. The stock length shocks:
http://www.monroe.com/catalog_lookup...=1986&LST=3375
are 8.5" travel front 7.5" rear:
http://www.monroe.com/pdf/ShockAbsor...sionCharts.pdf so re-arcing
may increase the ride height by four of those inches, making you look
cool without sending too much.
God Bless America, ßill O|||||||O
mailto:--------------------
RoyDMercer wrote:
>
> My 1986 CJ is my daily driver, therefore I am still running the stock
> suspension with 31" tires. My tie rod ends are shot, as are the shackle
> bushings. I placed an order for replacement parts today. My (original)
> springs are pretty flat, the bump stop is only 1 3/8" from the axle. I
> called a spring shop in town and they will re- arch them for $35.00 per
> spring. That is a whole lot cheaper than buying new springs. Does anyone
> know how far the bump stop is supposed to be from the axle? Will I then be
> able to fit some BFG 32" tires under there, after having them re-arched?
> TIA
http://www.----------.com/tireSizeFit.pdf without buying new springs and
longer shocks, and moving their mounts and extending the bump stops to
protect them. The stock length shocks:
http://www.monroe.com/catalog_lookup...=1986&LST=3375
are 8.5" travel front 7.5" rear:
http://www.monroe.com/pdf/ShockAbsor...sionCharts.pdf so re-arcing
may increase the ride height by four of those inches, making you look
cool without sending too much.
God Bless America, ßill O|||||||O
mailto:--------------------
RoyDMercer wrote:
>
> My 1986 CJ is my daily driver, therefore I am still running the stock
> suspension with 31" tires. My tie rod ends are shot, as are the shackle
> bushings. I placed an order for replacement parts today. My (original)
> springs are pretty flat, the bump stop is only 1 3/8" from the axle. I
> called a spring shop in town and they will re- arch them for $35.00 per
> spring. That is a whole lot cheaper than buying new springs. Does anyone
> know how far the bump stop is supposed to be from the axle? Will I then be
> able to fit some BFG 32" tires under there, after having them re-arched?
> TIA
06-10-2004, 11:16 AM
#10
Guest
Posts: n/a
Re: CJ-7 Springs
Thanks Bill & Bill.....I live in Nashville, TN.
"RoyDMercer" <bdickerson@gbtrealty.com> wrote in message
news:10ceuv8jl8mvac1@corp.supernews.com...
> My 1986 CJ is my daily driver, therefore I am still running the stock
> suspension with 31" tires. My tie rod ends are shot, as are the shackle
> bushings. I placed an order for replacement parts today. My (original)
> springs are pretty flat, the bump stop is only 1 3/8" from the axle. I
> called a spring shop in town and they will re- arch them for $35.00 per
> spring. That is a whole lot cheaper than buying new springs. Does anyone
> know how far the bump stop is supposed to be from the axle? Will I then
be
> able to fit some BFG 32" tires under there, after having them re-arched?
> TIA
>
>
"RoyDMercer" <bdickerson@gbtrealty.com> wrote in message
news:10ceuv8jl8mvac1@corp.supernews.com...
> My 1986 CJ is my daily driver, therefore I am still running the stock
> suspension with 31" tires. My tie rod ends are shot, as are the shackle
> bushings. I placed an order for replacement parts today. My (original)
> springs are pretty flat, the bump stop is only 1 3/8" from the axle. I
> called a spring shop in town and they will re- arch them for $35.00 per
> spring. That is a whole lot cheaper than buying new springs. Does anyone
> know how far the bump stop is supposed to be from the axle? Will I then
be
> able to fit some BFG 32" tires under there, after having them re-arched?
> TIA
>
>