CJ-7 Spring Over

Reply Subscribe

Thread Tools

Search this Thread

01-24-2004, 11:19 PM

#31

Guest

Posts: n/a

Re: CJ-7 Spring Over

Great info! Thanks.

T

Kevin Sperle wrote:
> 1. Do any other swaps (tranny, T/C, etc) that you have planned at the same
> time. Cause you're probably gonna have to have your drivshafts re-done. I
> had to have both of mine re-done, and now I'm doing a tub swap with tranny
> swap (TF727) and I'm afraid I might have to have my rear driveshaft
> shortened about back to where it was originally because of the added length
> in my new tranny.
>
> 2. You don't HAVE to buy the expensive extended braided steel brake lines.
> http://www.4x4wire.com/jeep/tech/brakes/brakehoses/
>
> 3. Cheap and easy extended front shock mounts
> http://www.4x4wire.com/jeep/tech/susp/cj_shock_ext/
>
>
> "T" <jeep_82usa@yahoo.com> wrote in message
> news:ArnPb.54192$zs4.19798@fed1read01...
>
>>I'm getting ready to do a spring-over on my CJ-7. I'd like to hear
>>about any lessons that you could share. I would appreciate it.
>>
>>Tony
>>
>
>
>