choke linkage problem? (or "i am an idiot")
04-04-2006, 11:04 PM
#31
Guest
Posts: n/a
Re: choke linkage problem? (or "i am an idiot")
One thing I have done if I bent something and needed to unbend it
(especially something like a linkage) is to use a vice-grip. Clamping it on
the bend usually straightens it out. I know you have further issues than
this, but you might want to keep this trick in your pocket...
Tomes
"bobvonbob" <bennettvonbennett@gmail.com> wrote in message
news:1144194051.977442.109140@g10g2000cwb.googlegr oups.com...
>i would be very grateful mike. thanks - i'm at a loss here - cant seem
> to get a new one and cant seem to get this one right... cant get my
> idle set at all now. very annoying. its always the worst when i am the
> agent of my own troubles.
> b
>
(especially something like a linkage) is to use a vice-grip. Clamping it on
the bend usually straightens it out. I know you have further issues than
this, but you might want to keep this trick in your pocket...
Tomes
"bobvonbob" <bennettvonbennett@gmail.com> wrote in message
news:1144194051.977442.109140@g10g2000cwb.googlegr oups.com...
>i would be very grateful mike. thanks - i'm at a loss here - cant seem
> to get a new one and cant seem to get this one right... cant get my
> idle set at all now. very annoying. its always the worst when i am the
> agent of my own troubles.
> b
>
04-05-2006, 11:25 AM
#32
Guest
Posts: n/a
Re: choke linkage problem? (or "i am an idiot")
I was told in 1978 or so, that bending the choke linkage rod was not a
legitimate way to adjust the choke. This is done at the gizmo that actuates
the whole mechanism, whether it be electric, bimetallic, or whatever.
Earle
"Tomes" <askme@here.net> wrote in message
news:XsGYf.101$sq5.36@newsread2.news.atl.earthlink .net...
> One thing I have done if I bent something and needed to unbend it
> (especially something like a linkage) is to use a vice-grip. Clamping it
on
> the bend usually straightens it out. I know you have further issues than
> this, but you might want to keep this trick in your pocket...
> Tomes
>
> "bobvonbob" <bennettvonbennett@gmail.com> wrote in message
> news:1144194051.977442.109140@g10g2000cwb.googlegr oups.com...
> >i would be very grateful mike. thanks - i'm at a loss here - cant seem
> > to get a new one and cant seem to get this one right... cant get my
> > idle set at all now. very annoying. its always the worst when i am the
> > agent of my own troubles.
> > b
> >
>
>
*** Free account sponsored by SecureIX.com ***
*** Encrypt your Internet usage with a free VPN account from http://www.SecureIX.com ***
legitimate way to adjust the choke. This is done at the gizmo that actuates
the whole mechanism, whether it be electric, bimetallic, or whatever.
Earle
"Tomes" <askme@here.net> wrote in message
news:XsGYf.101$sq5.36@newsread2.news.atl.earthlink .net...
> One thing I have done if I bent something and needed to unbend it
> (especially something like a linkage) is to use a vice-grip. Clamping it
on
> the bend usually straightens it out. I know you have further issues than
> this, but you might want to keep this trick in your pocket...
> Tomes
>
> "bobvonbob" <bennettvonbennett@gmail.com> wrote in message
> news:1144194051.977442.109140@g10g2000cwb.googlegr oups.com...
> >i would be very grateful mike. thanks - i'm at a loss here - cant seem
> > to get a new one and cant seem to get this one right... cant get my
> > idle set at all now. very annoying. its always the worst when i am the
> > agent of my own troubles.
> > b
> >
>
>
*** Free account sponsored by SecureIX.com ***
*** Encrypt your Internet usage with a free VPN account from http://www.SecureIX.com ***
04-05-2006, 11:25 AM
#33
Guest
Posts: n/a
Re: choke linkage problem? (or "i am an idiot")
I was told in 1978 or so, that bending the choke linkage rod was not a
legitimate way to adjust the choke. This is done at the gizmo that actuates
the whole mechanism, whether it be electric, bimetallic, or whatever.
Earle
"Tomes" <askme@here.net> wrote in message
news:XsGYf.101$sq5.36@newsread2.news.atl.earthlink .net...
> One thing I have done if I bent something and needed to unbend it
> (especially something like a linkage) is to use a vice-grip. Clamping it
on
> the bend usually straightens it out. I know you have further issues than
> this, but you might want to keep this trick in your pocket...
> Tomes
>
> "bobvonbob" <bennettvonbennett@gmail.com> wrote in message
> news:1144194051.977442.109140@g10g2000cwb.googlegr oups.com...
> >i would be very grateful mike. thanks - i'm at a loss here - cant seem
> > to get a new one and cant seem to get this one right... cant get my
> > idle set at all now. very annoying. its always the worst when i am the
> > agent of my own troubles.
> > b
> >
>
>
*** Free account sponsored by SecureIX.com ***
*** Encrypt your Internet usage with a free VPN account from http://www.SecureIX.com ***
legitimate way to adjust the choke. This is done at the gizmo that actuates
the whole mechanism, whether it be electric, bimetallic, or whatever.
Earle
"Tomes" <askme@here.net> wrote in message
news:XsGYf.101$sq5.36@newsread2.news.atl.earthlink .net...
> One thing I have done if I bent something and needed to unbend it
> (especially something like a linkage) is to use a vice-grip. Clamping it
on
> the bend usually straightens it out. I know you have further issues than
> this, but you might want to keep this trick in your pocket...
> Tomes
>
> "bobvonbob" <bennettvonbennett@gmail.com> wrote in message
> news:1144194051.977442.109140@g10g2000cwb.googlegr oups.com...
> >i would be very grateful mike. thanks - i'm at a loss here - cant seem
> > to get a new one and cant seem to get this one right... cant get my
> > idle set at all now. very annoying. its always the worst when i am the
> > agent of my own troubles.
> > b
> >
>
>
*** Free account sponsored by SecureIX.com ***
*** Encrypt your Internet usage with a free VPN account from http://www.SecureIX.com ***
04-05-2006, 11:25 AM
#34
Guest
Posts: n/a
Re: choke linkage problem? (or "i am an idiot")
I was told in 1978 or so, that bending the choke linkage rod was not a
legitimate way to adjust the choke. This is done at the gizmo that actuates
the whole mechanism, whether it be electric, bimetallic, or whatever.
Earle
"Tomes" <askme@here.net> wrote in message
news:XsGYf.101$sq5.36@newsread2.news.atl.earthlink .net...
> One thing I have done if I bent something and needed to unbend it
> (especially something like a linkage) is to use a vice-grip. Clamping it
on
> the bend usually straightens it out. I know you have further issues than
> this, but you might want to keep this trick in your pocket...
> Tomes
>
> "bobvonbob" <bennettvonbennett@gmail.com> wrote in message
> news:1144194051.977442.109140@g10g2000cwb.googlegr oups.com...
> >i would be very grateful mike. thanks - i'm at a loss here - cant seem
> > to get a new one and cant seem to get this one right... cant get my
> > idle set at all now. very annoying. its always the worst when i am the
> > agent of my own troubles.
> > b
> >
>
>
*** Free account sponsored by SecureIX.com ***
*** Encrypt your Internet usage with a free VPN account from http://www.SecureIX.com ***
legitimate way to adjust the choke. This is done at the gizmo that actuates
the whole mechanism, whether it be electric, bimetallic, or whatever.
Earle
"Tomes" <askme@here.net> wrote in message
news:XsGYf.101$sq5.36@newsread2.news.atl.earthlink .net...
> One thing I have done if I bent something and needed to unbend it
> (especially something like a linkage) is to use a vice-grip. Clamping it
on
> the bend usually straightens it out. I know you have further issues than
> this, but you might want to keep this trick in your pocket...
> Tomes
>
> "bobvonbob" <bennettvonbennett@gmail.com> wrote in message
> news:1144194051.977442.109140@g10g2000cwb.googlegr oups.com...
> >i would be very grateful mike. thanks - i'm at a loss here - cant seem
> > to get a new one and cant seem to get this one right... cant get my
> > idle set at all now. very annoying. its always the worst when i am the
> > agent of my own troubles.
> > b
> >
>
>
*** Free account sponsored by SecureIX.com ***
*** Encrypt your Internet usage with a free VPN account from http://www.SecureIX.com ***
04-05-2006, 07:23 PM
#35
Guest
Posts: n/a
Re: choke linkage problem? (or "i am an idiot")
LOL! I think I learned that in the 60's....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Earle Horton wrote:
>
> I was told in 1978 or so, that bending the choke linkage rod was not a
> legitimate way to adjust the choke. This is done at the gizmo that actuates
> the whole mechanism, whether it be electric, bimetallic, or whatever.
>
> Earle
>
> "Tomes" <askme@here.net> wrote in message
> news:XsGYf.101$sq5.36@newsread2.news.atl.earthlink .net...
> > One thing I have done if I bent something and needed to unbend it
> > (especially something like a linkage) is to use a vice-grip. Clamping it
> on
> > the bend usually straightens it out. I know you have further issues than
> > this, but you might want to keep this trick in your pocket...
> > Tomes
> >
> > "bobvonbob" <bennettvonbennett@gmail.com> wrote in message
> > news:1144194051.977442.109140@g10g2000cwb.googlegr oups.com...
> > >i would be very grateful mike. thanks - i'm at a loss here - cant seem
> > > to get a new one and cant seem to get this one right... cant get my
> > > idle set at all now. very annoying. its always the worst when i am the
> > > agent of my own troubles.
> > > b
> > >
> >
> >
>
> *** Free account sponsored by SecureIX.com ***
> *** Encrypt your Internet usage with a free VPN account from http://www.SecureIX.com ***
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Earle Horton wrote:
>
> I was told in 1978 or so, that bending the choke linkage rod was not a
> legitimate way to adjust the choke. This is done at the gizmo that actuates
> the whole mechanism, whether it be electric, bimetallic, or whatever.
>
> Earle
>
> "Tomes" <askme@here.net> wrote in message
> news:XsGYf.101$sq5.36@newsread2.news.atl.earthlink .net...
> > One thing I have done if I bent something and needed to unbend it
> > (especially something like a linkage) is to use a vice-grip. Clamping it
> on
> > the bend usually straightens it out. I know you have further issues than
> > this, but you might want to keep this trick in your pocket...
> > Tomes
> >
> > "bobvonbob" <bennettvonbennett@gmail.com> wrote in message
> > news:1144194051.977442.109140@g10g2000cwb.googlegr oups.com...
> > >i would be very grateful mike. thanks - i'm at a loss here - cant seem
> > > to get a new one and cant seem to get this one right... cant get my
> > > idle set at all now. very annoying. its always the worst when i am the
> > > agent of my own troubles.
> > > b
> > >
> >
> >
>
> *** Free account sponsored by SecureIX.com ***
> *** Encrypt your Internet usage with a free VPN account from http://www.SecureIX.com ***
04-05-2006, 07:23 PM
#36
Guest
Posts: n/a
Re: choke linkage problem? (or "i am an idiot")
LOL! I think I learned that in the 60's....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Earle Horton wrote:
>
> I was told in 1978 or so, that bending the choke linkage rod was not a
> legitimate way to adjust the choke. This is done at the gizmo that actuates
> the whole mechanism, whether it be electric, bimetallic, or whatever.
>
> Earle
>
> "Tomes" <askme@here.net> wrote in message
> news:XsGYf.101$sq5.36@newsread2.news.atl.earthlink .net...
> > One thing I have done if I bent something and needed to unbend it
> > (especially something like a linkage) is to use a vice-grip. Clamping it
> on
> > the bend usually straightens it out. I know you have further issues than
> > this, but you might want to keep this trick in your pocket...
> > Tomes
> >
> > "bobvonbob" <bennettvonbennett@gmail.com> wrote in message
> > news:1144194051.977442.109140@g10g2000cwb.googlegr oups.com...
> > >i would be very grateful mike. thanks - i'm at a loss here - cant seem
> > > to get a new one and cant seem to get this one right... cant get my
> > > idle set at all now. very annoying. its always the worst when i am the
> > > agent of my own troubles.
> > > b
> > >
> >
> >
>
> *** Free account sponsored by SecureIX.com ***
> *** Encrypt your Internet usage with a free VPN account from http://www.SecureIX.com ***
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Earle Horton wrote:
>
> I was told in 1978 or so, that bending the choke linkage rod was not a
> legitimate way to adjust the choke. This is done at the gizmo that actuates
> the whole mechanism, whether it be electric, bimetallic, or whatever.
>
> Earle
>
> "Tomes" <askme@here.net> wrote in message
> news:XsGYf.101$sq5.36@newsread2.news.atl.earthlink .net...
> > One thing I have done if I bent something and needed to unbend it
> > (especially something like a linkage) is to use a vice-grip. Clamping it
> on
> > the bend usually straightens it out. I know you have further issues than
> > this, but you might want to keep this trick in your pocket...
> > Tomes
> >
> > "bobvonbob" <bennettvonbennett@gmail.com> wrote in message
> > news:1144194051.977442.109140@g10g2000cwb.googlegr oups.com...
> > >i would be very grateful mike. thanks - i'm at a loss here - cant seem
> > > to get a new one and cant seem to get this one right... cant get my
> > > idle set at all now. very annoying. its always the worst when i am the
> > > agent of my own troubles.
> > > b
> > >
> >
> >
>
> *** Free account sponsored by SecureIX.com ***
> *** Encrypt your Internet usage with a free VPN account from http://www.SecureIX.com ***
04-05-2006, 07:23 PM
#37
Guest
Posts: n/a
Re: choke linkage problem? (or "i am an idiot")
LOL! I think I learned that in the 60's....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Earle Horton wrote:
>
> I was told in 1978 or so, that bending the choke linkage rod was not a
> legitimate way to adjust the choke. This is done at the gizmo that actuates
> the whole mechanism, whether it be electric, bimetallic, or whatever.
>
> Earle
>
> "Tomes" <askme@here.net> wrote in message
> news:XsGYf.101$sq5.36@newsread2.news.atl.earthlink .net...
> > One thing I have done if I bent something and needed to unbend it
> > (especially something like a linkage) is to use a vice-grip. Clamping it
> on
> > the bend usually straightens it out. I know you have further issues than
> > this, but you might want to keep this trick in your pocket...
> > Tomes
> >
> > "bobvonbob" <bennettvonbennett@gmail.com> wrote in message
> > news:1144194051.977442.109140@g10g2000cwb.googlegr oups.com...
> > >i would be very grateful mike. thanks - i'm at a loss here - cant seem
> > > to get a new one and cant seem to get this one right... cant get my
> > > idle set at all now. very annoying. its always the worst when i am the
> > > agent of my own troubles.
> > > b
> > >
> >
> >
>
> *** Free account sponsored by SecureIX.com ***
> *** Encrypt your Internet usage with a free VPN account from http://www.SecureIX.com ***
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Earle Horton wrote:
>
> I was told in 1978 or so, that bending the choke linkage rod was not a
> legitimate way to adjust the choke. This is done at the gizmo that actuates
> the whole mechanism, whether it be electric, bimetallic, or whatever.
>
> Earle
>
> "Tomes" <askme@here.net> wrote in message
> news:XsGYf.101$sq5.36@newsread2.news.atl.earthlink .net...
> > One thing I have done if I bent something and needed to unbend it
> > (especially something like a linkage) is to use a vice-grip. Clamping it
> on
> > the bend usually straightens it out. I know you have further issues than
> > this, but you might want to keep this trick in your pocket...
> > Tomes
> >
> > "bobvonbob" <bennettvonbennett@gmail.com> wrote in message
> > news:1144194051.977442.109140@g10g2000cwb.googlegr oups.com...
> > >i would be very grateful mike. thanks - i'm at a loss here - cant seem
> > > to get a new one and cant seem to get this one right... cant get my
> > > idle set at all now. very annoying. its always the worst when i am the
> > > agent of my own troubles.
> > > b
> > >
> >
> >
>
> *** Free account sponsored by SecureIX.com ***
> *** Encrypt your Internet usage with a free VPN account from http://www.SecureIX.com ***
04-05-2006, 07:42 PM
#38
Guest
Posts: n/a
Re: choke linkage problem? (or "i am an idiot")
Done...
Mike
bobvonbob wrote:
>
> i would be very grateful mike. thanks - i'm at a loss here - cant seem
> to get a new one and cant seem to get this one right... cant get my
> idle set at all now. very annoying. its always the worst when i am the
> agent of my own troubles.
> b
Mike
bobvonbob wrote:
>
> i would be very grateful mike. thanks - i'm at a loss here - cant seem
> to get a new one and cant seem to get this one right... cant get my
> idle set at all now. very annoying. its always the worst when i am the
> agent of my own troubles.
> b
04-05-2006, 07:42 PM
#39
Guest
Posts: n/a
Re: choke linkage problem? (or "i am an idiot")
Done...
Mike
bobvonbob wrote:
>
> i would be very grateful mike. thanks - i'm at a loss here - cant seem
> to get a new one and cant seem to get this one right... cant get my
> idle set at all now. very annoying. its always the worst when i am the
> agent of my own troubles.
> b
Mike
bobvonbob wrote:
>
> i would be very grateful mike. thanks - i'm at a loss here - cant seem
> to get a new one and cant seem to get this one right... cant get my
> idle set at all now. very annoying. its always the worst when i am the
> agent of my own troubles.
> b
04-05-2006, 07:42 PM
#40
Guest
Posts: n/a
Re: choke linkage problem? (or "i am an idiot")
Done...
Mike
bobvonbob wrote:
>
> i would be very grateful mike. thanks - i'm at a loss here - cant seem
> to get a new one and cant seem to get this one right... cant get my
> idle set at all now. very annoying. its always the worst when i am the
> agent of my own troubles.
> b
Mike
bobvonbob wrote:
>
> i would be very grateful mike. thanks - i'm at a loss here - cant seem
> to get a new one and cant seem to get this one right... cant get my
> idle set at all now. very annoying. its always the worst when i am the
> agent of my own troubles.
> b
Thread
Thread Starter
Forum
Replies
Last Post
Cujo DeSockpuppet
Jeep Mailing List
20
08-26-2007 11:09 PM
Simon Juncal
Jeep Mailing List
9
12-26-2003 08:00 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
