Chevy 350 Engine Swap
04-06-2005, 12:47 PM
#1
Guest
Posts: n/a
Chevy 350 Engine Swap
Hey, folks, I did some searching on the topic of swapping out engines
on Jeeps but I've still got some questions. Basically, what's going on
is a buddy of mine wants to get a Jeep and doesn't want a 4 cylinder
but those are the ones in the price range he's looking for (and that
aren't totally beaten up). So, my question is this: what would it take
to pull a 4 cylinder from a YJ and install a Chevy 350?
Basically, he'd like to buy a cheap 4 cylinder Jeep, yank the engine
and install a Chevy 350. I wanted to find out what the group thought
before I go prostrate myself before a couple of off-road shops and get
led around by the nose.
The Jeep won't be used for any hard-core rock climbing/crawling, or run
with 40 something inch tires, just used to tow a boat trailer and some
light off-roading/hunting.
Where does one start with this? Is the transmission going to bolt
right up to the 350 (he wants to get the 5 speed manual, so no
automatics)? Are engine mounts readily available to to fit the 350 to
a YJ? Will the transfer case (I presume all YJ's use the NP231 (NP,
right? I forget, but I remember my YJ has a <something>231 in it) hold
up (assuming my buddy doesn't blatantly abuse it)? Will springs need
to be changed to accomodate the added weight? Shocks? Will the stock
radiator cool the 350 or is it going to have to be replaced?
Can one just use a carbureted 350, a simple distributor/coil ignition
to keep this simple? What about meeting emissions testing? Is there a
simple way to get a more-efficient fuel injected 350 to put in the
Jeep, one with all the emissions parts in place (including what needs
to be put on the exhaust)?
Thank you for your time and help.
--HC
on Jeeps but I've still got some questions. Basically, what's going on
is a buddy of mine wants to get a Jeep and doesn't want a 4 cylinder
but those are the ones in the price range he's looking for (and that
aren't totally beaten up). So, my question is this: what would it take
to pull a 4 cylinder from a YJ and install a Chevy 350?
Basically, he'd like to buy a cheap 4 cylinder Jeep, yank the engine
and install a Chevy 350. I wanted to find out what the group thought
before I go prostrate myself before a couple of off-road shops and get
led around by the nose.
The Jeep won't be used for any hard-core rock climbing/crawling, or run
with 40 something inch tires, just used to tow a boat trailer and some
light off-roading/hunting.
Where does one start with this? Is the transmission going to bolt
right up to the 350 (he wants to get the 5 speed manual, so no
automatics)? Are engine mounts readily available to to fit the 350 to
a YJ? Will the transfer case (I presume all YJ's use the NP231 (NP,
right? I forget, but I remember my YJ has a <something>231 in it) hold
up (assuming my buddy doesn't blatantly abuse it)? Will springs need
to be changed to accomodate the added weight? Shocks? Will the stock
radiator cool the 350 or is it going to have to be replaced?
Can one just use a carbureted 350, a simple distributor/coil ignition
to keep this simple? What about meeting emissions testing? Is there a
simple way to get a more-efficient fuel injected 350 to put in the
Jeep, one with all the emissions parts in place (including what needs
to be put on the exhaust)?
Thank you for your time and help.
--HC
04-06-2005, 01:09 PM
#2
Guest
Posts: n/a
Re: Chevy 350 Engine Swap
Sounds an expensive way of doing it. The AX5 gearbox won't take the Jeep I6
4.0's power so it won't take a 350 either. However, if you want to try it
you can visit advanceadapters.com for a bell housing converter which will
set you back $405.70
http://eshop.advanceadapters.com/com...roduct_id=1656 ,
and they will also sell you engine mounts for another $150 bucks.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
<hboothe@gte.net> wrote in message
news:1112806023.960525.201770@z14g2000cwz.googlegr oups.com...
> Hey, folks, I did some searching on the topic of swapping out engines
> on Jeeps but I've still got some questions. Basically, what's going on
> is a buddy of mine wants to get a Jeep and doesn't want a 4 cylinder
> but those are the ones in the price range he's looking for (and that
> aren't totally beaten up). So, my question is this: what would it take
> to pull a 4 cylinder from a YJ and install a Chevy 350?
>
> Basically, he'd like to buy a cheap 4 cylinder Jeep, yank the engine
> and install a Chevy 350. I wanted to find out what the group thought
> before I go prostrate myself before a couple of off-road shops and get
> led around by the nose.
>
> The Jeep won't be used for any hard-core rock climbing/crawling, or run
> with 40 something inch tires, just used to tow a boat trailer and some
> light off-roading/hunting.
>
> Where does one start with this? Is the transmission going to bolt
> right up to the 350 (he wants to get the 5 speed manual, so no
> automatics)? Are engine mounts readily available to to fit the 350 to
> a YJ? Will the transfer case (I presume all YJ's use the NP231 (NP,
> right? I forget, but I remember my YJ has a <something>231 in it) hold
> up (assuming my buddy doesn't blatantly abuse it)? Will springs need
> to be changed to accomodate the added weight? Shocks? Will the stock
> radiator cool the 350 or is it going to have to be replaced?
>
> Can one just use a carbureted 350, a simple distributor/coil ignition
> to keep this simple? What about meeting emissions testing? Is there a
> simple way to get a more-efficient fuel injected 350 to put in the
> Jeep, one with all the emissions parts in place (including what needs
> to be put on the exhaust)?
>
> Thank you for your time and help.
>
> --HC
>
4.0's power so it won't take a 350 either. However, if you want to try it
you can visit advanceadapters.com for a bell housing converter which will
set you back $405.70
http://eshop.advanceadapters.com/com...roduct_id=1656 ,
and they will also sell you engine mounts for another $150 bucks.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
<hboothe@gte.net> wrote in message
news:1112806023.960525.201770@z14g2000cwz.googlegr oups.com...
> Hey, folks, I did some searching on the topic of swapping out engines
> on Jeeps but I've still got some questions. Basically, what's going on
> is a buddy of mine wants to get a Jeep and doesn't want a 4 cylinder
> but those are the ones in the price range he's looking for (and that
> aren't totally beaten up). So, my question is this: what would it take
> to pull a 4 cylinder from a YJ and install a Chevy 350?
>
> Basically, he'd like to buy a cheap 4 cylinder Jeep, yank the engine
> and install a Chevy 350. I wanted to find out what the group thought
> before I go prostrate myself before a couple of off-road shops and get
> led around by the nose.
>
> The Jeep won't be used for any hard-core rock climbing/crawling, or run
> with 40 something inch tires, just used to tow a boat trailer and some
> light off-roading/hunting.
>
> Where does one start with this? Is the transmission going to bolt
> right up to the 350 (he wants to get the 5 speed manual, so no
> automatics)? Are engine mounts readily available to to fit the 350 to
> a YJ? Will the transfer case (I presume all YJ's use the NP231 (NP,
> right? I forget, but I remember my YJ has a <something>231 in it) hold
> up (assuming my buddy doesn't blatantly abuse it)? Will springs need
> to be changed to accomodate the added weight? Shocks? Will the stock
> radiator cool the 350 or is it going to have to be replaced?
>
> Can one just use a carbureted 350, a simple distributor/coil ignition
> to keep this simple? What about meeting emissions testing? Is there a
> simple way to get a more-efficient fuel injected 350 to put in the
> Jeep, one with all the emissions parts in place (including what needs
> to be put on the exhaust)?
>
> Thank you for your time and help.
>
> --HC
>
04-06-2005, 01:09 PM
#3
Guest
Posts: n/a
Re: Chevy 350 Engine Swap
Sounds an expensive way of doing it. The AX5 gearbox won't take the Jeep I6
4.0's power so it won't take a 350 either. However, if you want to try it
you can visit advanceadapters.com for a bell housing converter which will
set you back $405.70
http://eshop.advanceadapters.com/com...roduct_id=1656 ,
and they will also sell you engine mounts for another $150 bucks.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
<hboothe@gte.net> wrote in message
news:1112806023.960525.201770@z14g2000cwz.googlegr oups.com...
> Hey, folks, I did some searching on the topic of swapping out engines
> on Jeeps but I've still got some questions. Basically, what's going on
> is a buddy of mine wants to get a Jeep and doesn't want a 4 cylinder
> but those are the ones in the price range he's looking for (and that
> aren't totally beaten up). So, my question is this: what would it take
> to pull a 4 cylinder from a YJ and install a Chevy 350?
>
> Basically, he'd like to buy a cheap 4 cylinder Jeep, yank the engine
> and install a Chevy 350. I wanted to find out what the group thought
> before I go prostrate myself before a couple of off-road shops and get
> led around by the nose.
>
> The Jeep won't be used for any hard-core rock climbing/crawling, or run
> with 40 something inch tires, just used to tow a boat trailer and some
> light off-roading/hunting.
>
> Where does one start with this? Is the transmission going to bolt
> right up to the 350 (he wants to get the 5 speed manual, so no
> automatics)? Are engine mounts readily available to to fit the 350 to
> a YJ? Will the transfer case (I presume all YJ's use the NP231 (NP,
> right? I forget, but I remember my YJ has a <something>231 in it) hold
> up (assuming my buddy doesn't blatantly abuse it)? Will springs need
> to be changed to accomodate the added weight? Shocks? Will the stock
> radiator cool the 350 or is it going to have to be replaced?
>
> Can one just use a carbureted 350, a simple distributor/coil ignition
> to keep this simple? What about meeting emissions testing? Is there a
> simple way to get a more-efficient fuel injected 350 to put in the
> Jeep, one with all the emissions parts in place (including what needs
> to be put on the exhaust)?
>
> Thank you for your time and help.
>
> --HC
>
4.0's power so it won't take a 350 either. However, if you want to try it
you can visit advanceadapters.com for a bell housing converter which will
set you back $405.70
http://eshop.advanceadapters.com/com...roduct_id=1656 ,
and they will also sell you engine mounts for another $150 bucks.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
<hboothe@gte.net> wrote in message
news:1112806023.960525.201770@z14g2000cwz.googlegr oups.com...
> Hey, folks, I did some searching on the topic of swapping out engines
> on Jeeps but I've still got some questions. Basically, what's going on
> is a buddy of mine wants to get a Jeep and doesn't want a 4 cylinder
> but those are the ones in the price range he's looking for (and that
> aren't totally beaten up). So, my question is this: what would it take
> to pull a 4 cylinder from a YJ and install a Chevy 350?
>
> Basically, he'd like to buy a cheap 4 cylinder Jeep, yank the engine
> and install a Chevy 350. I wanted to find out what the group thought
> before I go prostrate myself before a couple of off-road shops and get
> led around by the nose.
>
> The Jeep won't be used for any hard-core rock climbing/crawling, or run
> with 40 something inch tires, just used to tow a boat trailer and some
> light off-roading/hunting.
>
> Where does one start with this? Is the transmission going to bolt
> right up to the 350 (he wants to get the 5 speed manual, so no
> automatics)? Are engine mounts readily available to to fit the 350 to
> a YJ? Will the transfer case (I presume all YJ's use the NP231 (NP,
> right? I forget, but I remember my YJ has a <something>231 in it) hold
> up (assuming my buddy doesn't blatantly abuse it)? Will springs need
> to be changed to accomodate the added weight? Shocks? Will the stock
> radiator cool the 350 or is it going to have to be replaced?
>
> Can one just use a carbureted 350, a simple distributor/coil ignition
> to keep this simple? What about meeting emissions testing? Is there a
> simple way to get a more-efficient fuel injected 350 to put in the
> Jeep, one with all the emissions parts in place (including what needs
> to be put on the exhaust)?
>
> Thank you for your time and help.
>
> --HC
>
04-06-2005, 01:09 PM
#4
Guest
Posts: n/a
Re: Chevy 350 Engine Swap
Sounds an expensive way of doing it. The AX5 gearbox won't take the Jeep I6
4.0's power so it won't take a 350 either. However, if you want to try it
you can visit advanceadapters.com for a bell housing converter which will
set you back $405.70
http://eshop.advanceadapters.com/com...roduct_id=1656 ,
and they will also sell you engine mounts for another $150 bucks.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
<hboothe@gte.net> wrote in message
news:1112806023.960525.201770@z14g2000cwz.googlegr oups.com...
> Hey, folks, I did some searching on the topic of swapping out engines
> on Jeeps but I've still got some questions. Basically, what's going on
> is a buddy of mine wants to get a Jeep and doesn't want a 4 cylinder
> but those are the ones in the price range he's looking for (and that
> aren't totally beaten up). So, my question is this: what would it take
> to pull a 4 cylinder from a YJ and install a Chevy 350?
>
> Basically, he'd like to buy a cheap 4 cylinder Jeep, yank the engine
> and install a Chevy 350. I wanted to find out what the group thought
> before I go prostrate myself before a couple of off-road shops and get
> led around by the nose.
>
> The Jeep won't be used for any hard-core rock climbing/crawling, or run
> with 40 something inch tires, just used to tow a boat trailer and some
> light off-roading/hunting.
>
> Where does one start with this? Is the transmission going to bolt
> right up to the 350 (he wants to get the 5 speed manual, so no
> automatics)? Are engine mounts readily available to to fit the 350 to
> a YJ? Will the transfer case (I presume all YJ's use the NP231 (NP,
> right? I forget, but I remember my YJ has a <something>231 in it) hold
> up (assuming my buddy doesn't blatantly abuse it)? Will springs need
> to be changed to accomodate the added weight? Shocks? Will the stock
> radiator cool the 350 or is it going to have to be replaced?
>
> Can one just use a carbureted 350, a simple distributor/coil ignition
> to keep this simple? What about meeting emissions testing? Is there a
> simple way to get a more-efficient fuel injected 350 to put in the
> Jeep, one with all the emissions parts in place (including what needs
> to be put on the exhaust)?
>
> Thank you for your time and help.
>
> --HC
>
4.0's power so it won't take a 350 either. However, if you want to try it
you can visit advanceadapters.com for a bell housing converter which will
set you back $405.70
http://eshop.advanceadapters.com/com...roduct_id=1656 ,
and they will also sell you engine mounts for another $150 bucks.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
<hboothe@gte.net> wrote in message
news:1112806023.960525.201770@z14g2000cwz.googlegr oups.com...
> Hey, folks, I did some searching on the topic of swapping out engines
> on Jeeps but I've still got some questions. Basically, what's going on
> is a buddy of mine wants to get a Jeep and doesn't want a 4 cylinder
> but those are the ones in the price range he's looking for (and that
> aren't totally beaten up). So, my question is this: what would it take
> to pull a 4 cylinder from a YJ and install a Chevy 350?
>
> Basically, he'd like to buy a cheap 4 cylinder Jeep, yank the engine
> and install a Chevy 350. I wanted to find out what the group thought
> before I go prostrate myself before a couple of off-road shops and get
> led around by the nose.
>
> The Jeep won't be used for any hard-core rock climbing/crawling, or run
> with 40 something inch tires, just used to tow a boat trailer and some
> light off-roading/hunting.
>
> Where does one start with this? Is the transmission going to bolt
> right up to the 350 (he wants to get the 5 speed manual, so no
> automatics)? Are engine mounts readily available to to fit the 350 to
> a YJ? Will the transfer case (I presume all YJ's use the NP231 (NP,
> right? I forget, but I remember my YJ has a <something>231 in it) hold
> up (assuming my buddy doesn't blatantly abuse it)? Will springs need
> to be changed to accomodate the added weight? Shocks? Will the stock
> radiator cool the 350 or is it going to have to be replaced?
>
> Can one just use a carbureted 350, a simple distributor/coil ignition
> to keep this simple? What about meeting emissions testing? Is there a
> simple way to get a more-efficient fuel injected 350 to put in the
> Jeep, one with all the emissions parts in place (including what needs
> to be put on the exhaust)?
>
> Thank you for your time and help.
>
> --HC
>
04-06-2005, 01:09 PM
#5
Guest
Posts: n/a
Re: Chevy 350 Engine Swap
Sounds an expensive way of doing it. The AX5 gearbox won't take the Jeep I6
4.0's power so it won't take a 350 either. However, if you want to try it
you can visit advanceadapters.com for a bell housing converter which will
set you back $405.70
http://eshop.advanceadapters.com/com...roduct_id=1656 ,
and they will also sell you engine mounts for another $150 bucks.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
<hboothe@gte.net> wrote in message
news:1112806023.960525.201770@z14g2000cwz.googlegr oups.com...
> Hey, folks, I did some searching on the topic of swapping out engines
> on Jeeps but I've still got some questions. Basically, what's going on
> is a buddy of mine wants to get a Jeep and doesn't want a 4 cylinder
> but those are the ones in the price range he's looking for (and that
> aren't totally beaten up). So, my question is this: what would it take
> to pull a 4 cylinder from a YJ and install a Chevy 350?
>
> Basically, he'd like to buy a cheap 4 cylinder Jeep, yank the engine
> and install a Chevy 350. I wanted to find out what the group thought
> before I go prostrate myself before a couple of off-road shops and get
> led around by the nose.
>
> The Jeep won't be used for any hard-core rock climbing/crawling, or run
> with 40 something inch tires, just used to tow a boat trailer and some
> light off-roading/hunting.
>
> Where does one start with this? Is the transmission going to bolt
> right up to the 350 (he wants to get the 5 speed manual, so no
> automatics)? Are engine mounts readily available to to fit the 350 to
> a YJ? Will the transfer case (I presume all YJ's use the NP231 (NP,
> right? I forget, but I remember my YJ has a <something>231 in it) hold
> up (assuming my buddy doesn't blatantly abuse it)? Will springs need
> to be changed to accomodate the added weight? Shocks? Will the stock
> radiator cool the 350 or is it going to have to be replaced?
>
> Can one just use a carbureted 350, a simple distributor/coil ignition
> to keep this simple? What about meeting emissions testing? Is there a
> simple way to get a more-efficient fuel injected 350 to put in the
> Jeep, one with all the emissions parts in place (including what needs
> to be put on the exhaust)?
>
> Thank you for your time and help.
>
> --HC
>
4.0's power so it won't take a 350 either. However, if you want to try it
you can visit advanceadapters.com for a bell housing converter which will
set you back $405.70
http://eshop.advanceadapters.com/com...roduct_id=1656 ,
and they will also sell you engine mounts for another $150 bucks.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
<hboothe@gte.net> wrote in message
news:1112806023.960525.201770@z14g2000cwz.googlegr oups.com...
> Hey, folks, I did some searching on the topic of swapping out engines
> on Jeeps but I've still got some questions. Basically, what's going on
> is a buddy of mine wants to get a Jeep and doesn't want a 4 cylinder
> but those are the ones in the price range he's looking for (and that
> aren't totally beaten up). So, my question is this: what would it take
> to pull a 4 cylinder from a YJ and install a Chevy 350?
>
> Basically, he'd like to buy a cheap 4 cylinder Jeep, yank the engine
> and install a Chevy 350. I wanted to find out what the group thought
> before I go prostrate myself before a couple of off-road shops and get
> led around by the nose.
>
> The Jeep won't be used for any hard-core rock climbing/crawling, or run
> with 40 something inch tires, just used to tow a boat trailer and some
> light off-roading/hunting.
>
> Where does one start with this? Is the transmission going to bolt
> right up to the 350 (he wants to get the 5 speed manual, so no
> automatics)? Are engine mounts readily available to to fit the 350 to
> a YJ? Will the transfer case (I presume all YJ's use the NP231 (NP,
> right? I forget, but I remember my YJ has a <something>231 in it) hold
> up (assuming my buddy doesn't blatantly abuse it)? Will springs need
> to be changed to accomodate the added weight? Shocks? Will the stock
> radiator cool the 350 or is it going to have to be replaced?
>
> Can one just use a carbureted 350, a simple distributor/coil ignition
> to keep this simple? What about meeting emissions testing? Is there a
> simple way to get a more-efficient fuel injected 350 to put in the
> Jeep, one with all the emissions parts in place (including what needs
> to be put on the exhaust)?
>
> Thank you for your time and help.
>
> --HC
>
04-06-2005, 01:38 PM
#10
Guest
Posts: n/a
Re: Chevy 350 Engine Swap
You really need to start off with the emissions cops....
Most places have their motor vehicle dept. online now so you should be
able to check.
Some areas insist on the engine at least as new as the vehicle, some
insist on an engine made after 2000, some don't care and it becomes a
'hot rod', etc....
That will give you a better idea of what to look or ask for in parts.
There is a guy I know with a Mustang 5.0 and the Mustang T5 tranny in
his CJ7, so lots of swaps are possible.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
hboothe@gte.net wrote:
>
> Hey, folks, I did some searching on the topic of swapping out engines
> on Jeeps but I've still got some questions. Basically, what's going on
> is a buddy of mine wants to get a Jeep and doesn't want a 4 cylinder
> but those are the ones in the price range he's looking for (and that
> aren't totally beaten up). So, my question is this: what would it take
> to pull a 4 cylinder from a YJ and install a Chevy 350?
>
> Basically, he'd like to buy a cheap 4 cylinder Jeep, yank the engine
> and install a Chevy 350. I wanted to find out what the group thought
> before I go prostrate myself before a couple of off-road shops and get
> led around by the nose.
>
> The Jeep won't be used for any hard-core rock climbing/crawling, or run
> with 40 something inch tires, just used to tow a boat trailer and some
> light off-roading/hunting.
>
> Where does one start with this? Is the transmission going to bolt
> right up to the 350 (he wants to get the 5 speed manual, so no
> automatics)? Are engine mounts readily available to to fit the 350 to
> a YJ? Will the transfer case (I presume all YJ's use the NP231 (NP,
> right? I forget, but I remember my YJ has a <something>231 in it) hold
> up (assuming my buddy doesn't blatantly abuse it)? Will springs need
> to be changed to accomodate the added weight? Shocks? Will the stock
> radiator cool the 350 or is it going to have to be replaced?
>
> Can one just use a carbureted 350, a simple distributor/coil ignition
> to keep this simple? What about meeting emissions testing? Is there a
> simple way to get a more-efficient fuel injected 350 to put in the
> Jeep, one with all the emissions parts in place (including what needs
> to be put on the exhaust)?
>
> Thank you for your time and help.
>
> --HC
Most places have their motor vehicle dept. online now so you should be
able to check.
Some areas insist on the engine at least as new as the vehicle, some
insist on an engine made after 2000, some don't care and it becomes a
'hot rod', etc....
That will give you a better idea of what to look or ask for in parts.
There is a guy I know with a Mustang 5.0 and the Mustang T5 tranny in
his CJ7, so lots of swaps are possible.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
hboothe@gte.net wrote:
>
> Hey, folks, I did some searching on the topic of swapping out engines
> on Jeeps but I've still got some questions. Basically, what's going on
> is a buddy of mine wants to get a Jeep and doesn't want a 4 cylinder
> but those are the ones in the price range he's looking for (and that
> aren't totally beaten up). So, my question is this: what would it take
> to pull a 4 cylinder from a YJ and install a Chevy 350?
>
> Basically, he'd like to buy a cheap 4 cylinder Jeep, yank the engine
> and install a Chevy 350. I wanted to find out what the group thought
> before I go prostrate myself before a couple of off-road shops and get
> led around by the nose.
>
> The Jeep won't be used for any hard-core rock climbing/crawling, or run
> with 40 something inch tires, just used to tow a boat trailer and some
> light off-roading/hunting.
>
> Where does one start with this? Is the transmission going to bolt
> right up to the 350 (he wants to get the 5 speed manual, so no
> automatics)? Are engine mounts readily available to to fit the 350 to
> a YJ? Will the transfer case (I presume all YJ's use the NP231 (NP,
> right? I forget, but I remember my YJ has a <something>231 in it) hold
> up (assuming my buddy doesn't blatantly abuse it)? Will springs need
> to be changed to accomodate the added weight? Shocks? Will the stock
> radiator cool the 350 or is it going to have to be replaced?
>
> Can one just use a carbureted 350, a simple distributor/coil ignition
> to keep this simple? What about meeting emissions testing? Is there a
> simple way to get a more-efficient fuel injected 350 to put in the
> Jeep, one with all the emissions parts in place (including what needs
> to be put on the exhaust)?
>
> Thank you for your time and help.
>
> --HC