Cherokee clutch problem
11-03-2003, 02:30 PM
#11
Guest
Posts: n/a
Re: Cherokee clutch problem
Good heavens Bill, have you been drinking. We are talking '96 XJ here as
stated in the guys first sentence.
Respectfully,
Curt
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3FA5ECEA.2A1B7250@***.net...
> Hi Jeff,
> If it's the '95 YJ you have, then you have the internal frog
> slave: http://www.----------.com/YJslave.jpg If it's the '97 TJ then
> it's external like the Fords and Chevys have been using since the
> fifties: http://www.----------.com/slave.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Jeff DeWitt wrote:
> >
> > My 96 Jeep Cherokee (6, 5 speed) has a problem. The clutch has been
> > releasing closer to the
> > floor and some other car folks agreed with my belief that it is a
> > hydraulic problem
> >
> > The problem is getting worse and I'm going to have to do something about
> >
> > it sooner rather than later. What I'm planning on doing is replacing
> > the clutch master and slave cylinders. Have any of you worked on one of
> >
> > these things, and are there any nasty surprises I should look for? Jeep
> >
> > didn't do something stupid like put the slave cylinder inside the
> > bellhousing did they? I DON'T want to farm this out but this is my
> > daily driver and I can't have it down for any length of time.
> >
> > Thanks!
> >
> > Jeff DeWitt
stated in the guys first sentence.
Respectfully,
Curt
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3FA5ECEA.2A1B7250@***.net...
> Hi Jeff,
> If it's the '95 YJ you have, then you have the internal frog
> slave: http://www.----------.com/YJslave.jpg If it's the '97 TJ then
> it's external like the Fords and Chevys have been using since the
> fifties: http://www.----------.com/slave.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Jeff DeWitt wrote:
> >
> > My 96 Jeep Cherokee (6, 5 speed) has a problem. The clutch has been
> > releasing closer to the
> > floor and some other car folks agreed with my belief that it is a
> > hydraulic problem
> >
> > The problem is getting worse and I'm going to have to do something about
> >
> > it sooner rather than later. What I'm planning on doing is replacing
> > the clutch master and slave cylinders. Have any of you worked on one of
> >
> > these things, and are there any nasty surprises I should look for? Jeep
> >
> > didn't do something stupid like put the slave cylinder inside the
> > bellhousing did they? I DON'T want to farm this out but this is my
> > daily driver and I can't have it down for any length of time.
> >
> > Thanks!
> >
> > Jeff DeWitt
11-03-2003, 02:30 PM
#12
Guest
Posts: n/a
Re: Cherokee clutch problem
Good heavens Bill, have you been drinking. We are talking '96 XJ here as
stated in the guys first sentence.
Respectfully,
Curt
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3FA5ECEA.2A1B7250@***.net...
> Hi Jeff,
> If it's the '95 YJ you have, then you have the internal frog
> slave: http://www.----------.com/YJslave.jpg If it's the '97 TJ then
> it's external like the Fords and Chevys have been using since the
> fifties: http://www.----------.com/slave.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Jeff DeWitt wrote:
> >
> > My 96 Jeep Cherokee (6, 5 speed) has a problem. The clutch has been
> > releasing closer to the
> > floor and some other car folks agreed with my belief that it is a
> > hydraulic problem
> >
> > The problem is getting worse and I'm going to have to do something about
> >
> > it sooner rather than later. What I'm planning on doing is replacing
> > the clutch master and slave cylinders. Have any of you worked on one of
> >
> > these things, and are there any nasty surprises I should look for? Jeep
> >
> > didn't do something stupid like put the slave cylinder inside the
> > bellhousing did they? I DON'T want to farm this out but this is my
> > daily driver and I can't have it down for any length of time.
> >
> > Thanks!
> >
> > Jeff DeWitt
stated in the guys first sentence.
Respectfully,
Curt
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3FA5ECEA.2A1B7250@***.net...
> Hi Jeff,
> If it's the '95 YJ you have, then you have the internal frog
> slave: http://www.----------.com/YJslave.jpg If it's the '97 TJ then
> it's external like the Fords and Chevys have been using since the
> fifties: http://www.----------.com/slave.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Jeff DeWitt wrote:
> >
> > My 96 Jeep Cherokee (6, 5 speed) has a problem. The clutch has been
> > releasing closer to the
> > floor and some other car folks agreed with my belief that it is a
> > hydraulic problem
> >
> > The problem is getting worse and I'm going to have to do something about
> >
> > it sooner rather than later. What I'm planning on doing is replacing
> > the clutch master and slave cylinders. Have any of you worked on one of
> >
> > these things, and are there any nasty surprises I should look for? Jeep
> >
> > didn't do something stupid like put the slave cylinder inside the
> > bellhousing did they? I DON'T want to farm this out but this is my
> > daily driver and I can't have it down for any length of time.
> >
> > Thanks!
> >
> > Jeff DeWitt
11-03-2003, 02:30 PM
#13
Guest
Posts: n/a
Re: Cherokee clutch problem
Good heavens Bill, have you been drinking. We are talking '96 XJ here as
stated in the guys first sentence.
Respectfully,
Curt
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3FA5ECEA.2A1B7250@***.net...
> Hi Jeff,
> If it's the '95 YJ you have, then you have the internal frog
> slave: http://www.----------.com/YJslave.jpg If it's the '97 TJ then
> it's external like the Fords and Chevys have been using since the
> fifties: http://www.----------.com/slave.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Jeff DeWitt wrote:
> >
> > My 96 Jeep Cherokee (6, 5 speed) has a problem. The clutch has been
> > releasing closer to the
> > floor and some other car folks agreed with my belief that it is a
> > hydraulic problem
> >
> > The problem is getting worse and I'm going to have to do something about
> >
> > it sooner rather than later. What I'm planning on doing is replacing
> > the clutch master and slave cylinders. Have any of you worked on one of
> >
> > these things, and are there any nasty surprises I should look for? Jeep
> >
> > didn't do something stupid like put the slave cylinder inside the
> > bellhousing did they? I DON'T want to farm this out but this is my
> > daily driver and I can't have it down for any length of time.
> >
> > Thanks!
> >
> > Jeff DeWitt
stated in the guys first sentence.
Respectfully,
Curt
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3FA5ECEA.2A1B7250@***.net...
> Hi Jeff,
> If it's the '95 YJ you have, then you have the internal frog
> slave: http://www.----------.com/YJslave.jpg If it's the '97 TJ then
> it's external like the Fords and Chevys have been using since the
> fifties: http://www.----------.com/slave.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Jeff DeWitt wrote:
> >
> > My 96 Jeep Cherokee (6, 5 speed) has a problem. The clutch has been
> > releasing closer to the
> > floor and some other car folks agreed with my belief that it is a
> > hydraulic problem
> >
> > The problem is getting worse and I'm going to have to do something about
> >
> > it sooner rather than later. What I'm planning on doing is replacing
> > the clutch master and slave cylinders. Have any of you worked on one of
> >
> > these things, and are there any nasty surprises I should look for? Jeep
> >
> > didn't do something stupid like put the slave cylinder inside the
> > bellhousing did they? I DON'T want to farm this out but this is my
> > daily driver and I can't have it down for any length of time.
> >
> > Thanks!
> >
> > Jeff DeWitt
11-03-2003, 03:37 PM
#14
Guest
Posts: n/a
Re: Cherokee clutch problem
Hi Matt,
Oops, looks like another senior moment. Looks like I should quote
before I start to write, and find my graphics, and of course proof read,
something I've never taken the time to do.
To answer your question, judging by their prices the switch from
internal to external slaves seems to be '94 Cherokee sixes:
http://www.----------.com/XJslaves.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Matt Macchiarolo wrote:
>
> Ah, Bill, it's a '96XJ, look at the first sentence of the post...that said,
> didn't the YJ changed to an external slave cylinder in the early 90's?
Oops, looks like another senior moment. Looks like I should quote
before I start to write, and find my graphics, and of course proof read,
something I've never taken the time to do.
To answer your question, judging by their prices the switch from
internal to external slaves seems to be '94 Cherokee sixes:
http://www.----------.com/XJslaves.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Matt Macchiarolo wrote:
>
> Ah, Bill, it's a '96XJ, look at the first sentence of the post...that said,
> didn't the YJ changed to an external slave cylinder in the early 90's?
11-03-2003, 03:37 PM
#15
Guest
Posts: n/a
Re: Cherokee clutch problem
Hi Matt,
Oops, looks like another senior moment. Looks like I should quote
before I start to write, and find my graphics, and of course proof read,
something I've never taken the time to do.
To answer your question, judging by their prices the switch from
internal to external slaves seems to be '94 Cherokee sixes:
http://www.----------.com/XJslaves.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Matt Macchiarolo wrote:
>
> Ah, Bill, it's a '96XJ, look at the first sentence of the post...that said,
> didn't the YJ changed to an external slave cylinder in the early 90's?
Oops, looks like another senior moment. Looks like I should quote
before I start to write, and find my graphics, and of course proof read,
something I've never taken the time to do.
To answer your question, judging by their prices the switch from
internal to external slaves seems to be '94 Cherokee sixes:
http://www.----------.com/XJslaves.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Matt Macchiarolo wrote:
>
> Ah, Bill, it's a '96XJ, look at the first sentence of the post...that said,
> didn't the YJ changed to an external slave cylinder in the early 90's?
11-03-2003, 03:37 PM
#16
Guest
Posts: n/a
Re: Cherokee clutch problem
Hi Matt,
Oops, looks like another senior moment. Looks like I should quote
before I start to write, and find my graphics, and of course proof read,
something I've never taken the time to do.
To answer your question, judging by their prices the switch from
internal to external slaves seems to be '94 Cherokee sixes:
http://www.----------.com/XJslaves.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Matt Macchiarolo wrote:
>
> Ah, Bill, it's a '96XJ, look at the first sentence of the post...that said,
> didn't the YJ changed to an external slave cylinder in the early 90's?
Oops, looks like another senior moment. Looks like I should quote
before I start to write, and find my graphics, and of course proof read,
something I've never taken the time to do.
To answer your question, judging by their prices the switch from
internal to external slaves seems to be '94 Cherokee sixes:
http://www.----------.com/XJslaves.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Matt Macchiarolo wrote:
>
> Ah, Bill, it's a '96XJ, look at the first sentence of the post...that said,
> didn't the YJ changed to an external slave cylinder in the early 90's?
11-03-2003, 04:28 PM
#17
Guest
Posts: n/a
Re: Cherokee clutch problem
Changeover to the external slave was '94 for the YJ and I'm pretty
sure that the XJ went at the same time.
On Mon, 3 Nov 2003 05:51:38 UTC L.W.(ßill) ------ III
<----------@***.net> wrote:
> Hi Jeff,
> If it's the '95 YJ you have, then you have the internal frog
> slave: http://www.----------.com/YJslave.jpg If it's the '97 TJ then
> it's external like the Fords and Chevys have been using since the
> fifties: http://www.----------.com/slave.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Jeff DeWitt wrote:
> >
> > My 96 Jeep Cherokee (6, 5 speed) has a problem. The clutch has been
> > releasing closer to the
> > floor and some other car folks agreed with my belief that it is a
> > hydraulic problem
> >
> > The problem is getting worse and I'm going to have to do something about
> >
> > it sooner rather than later. What I'm planning on doing is replacing
> > the clutch master and slave cylinders. Have any of you worked on one of
> >
> > these things, and are there any nasty surprises I should look for? Jeep
> >
> > didn't do something stupid like put the slave cylinder inside the
> > bellhousing did they? I DON'T want to farm this out but this is my
> > daily driver and I can't have it down for any length of time.
> >
> > Thanks!
> >
> > Jeff DeWitt
--
Will Honea <whonea@codenet.net>
sure that the XJ went at the same time.
On Mon, 3 Nov 2003 05:51:38 UTC L.W.(ßill) ------ III
<----------@***.net> wrote:
> Hi Jeff,
> If it's the '95 YJ you have, then you have the internal frog
> slave: http://www.----------.com/YJslave.jpg If it's the '97 TJ then
> it's external like the Fords and Chevys have been using since the
> fifties: http://www.----------.com/slave.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Jeff DeWitt wrote:
> >
> > My 96 Jeep Cherokee (6, 5 speed) has a problem. The clutch has been
> > releasing closer to the
> > floor and some other car folks agreed with my belief that it is a
> > hydraulic problem
> >
> > The problem is getting worse and I'm going to have to do something about
> >
> > it sooner rather than later. What I'm planning on doing is replacing
> > the clutch master and slave cylinders. Have any of you worked on one of
> >
> > these things, and are there any nasty surprises I should look for? Jeep
> >
> > didn't do something stupid like put the slave cylinder inside the
> > bellhousing did they? I DON'T want to farm this out but this is my
> > daily driver and I can't have it down for any length of time.
> >
> > Thanks!
> >
> > Jeff DeWitt
--
Will Honea <whonea@codenet.net>
11-03-2003, 04:28 PM
#18
Guest
Posts: n/a
Re: Cherokee clutch problem
Changeover to the external slave was '94 for the YJ and I'm pretty
sure that the XJ went at the same time.
On Mon, 3 Nov 2003 05:51:38 UTC L.W.(ßill) ------ III
<----------@***.net> wrote:
> Hi Jeff,
> If it's the '95 YJ you have, then you have the internal frog
> slave: http://www.----------.com/YJslave.jpg If it's the '97 TJ then
> it's external like the Fords and Chevys have been using since the
> fifties: http://www.----------.com/slave.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Jeff DeWitt wrote:
> >
> > My 96 Jeep Cherokee (6, 5 speed) has a problem. The clutch has been
> > releasing closer to the
> > floor and some other car folks agreed with my belief that it is a
> > hydraulic problem
> >
> > The problem is getting worse and I'm going to have to do something about
> >
> > it sooner rather than later. What I'm planning on doing is replacing
> > the clutch master and slave cylinders. Have any of you worked on one of
> >
> > these things, and are there any nasty surprises I should look for? Jeep
> >
> > didn't do something stupid like put the slave cylinder inside the
> > bellhousing did they? I DON'T want to farm this out but this is my
> > daily driver and I can't have it down for any length of time.
> >
> > Thanks!
> >
> > Jeff DeWitt
--
Will Honea <whonea@codenet.net>
sure that the XJ went at the same time.
On Mon, 3 Nov 2003 05:51:38 UTC L.W.(ßill) ------ III
<----------@***.net> wrote:
> Hi Jeff,
> If it's the '95 YJ you have, then you have the internal frog
> slave: http://www.----------.com/YJslave.jpg If it's the '97 TJ then
> it's external like the Fords and Chevys have been using since the
> fifties: http://www.----------.com/slave.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Jeff DeWitt wrote:
> >
> > My 96 Jeep Cherokee (6, 5 speed) has a problem. The clutch has been
> > releasing closer to the
> > floor and some other car folks agreed with my belief that it is a
> > hydraulic problem
> >
> > The problem is getting worse and I'm going to have to do something about
> >
> > it sooner rather than later. What I'm planning on doing is replacing
> > the clutch master and slave cylinders. Have any of you worked on one of
> >
> > these things, and are there any nasty surprises I should look for? Jeep
> >
> > didn't do something stupid like put the slave cylinder inside the
> > bellhousing did they? I DON'T want to farm this out but this is my
> > daily driver and I can't have it down for any length of time.
> >
> > Thanks!
> >
> > Jeff DeWitt
--
Will Honea <whonea@codenet.net>
11-03-2003, 04:28 PM
#19
Guest
Posts: n/a
Re: Cherokee clutch problem
Changeover to the external slave was '94 for the YJ and I'm pretty
sure that the XJ went at the same time.
On Mon, 3 Nov 2003 05:51:38 UTC L.W.(ßill) ------ III
<----------@***.net> wrote:
> Hi Jeff,
> If it's the '95 YJ you have, then you have the internal frog
> slave: http://www.----------.com/YJslave.jpg If it's the '97 TJ then
> it's external like the Fords and Chevys have been using since the
> fifties: http://www.----------.com/slave.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Jeff DeWitt wrote:
> >
> > My 96 Jeep Cherokee (6, 5 speed) has a problem. The clutch has been
> > releasing closer to the
> > floor and some other car folks agreed with my belief that it is a
> > hydraulic problem
> >
> > The problem is getting worse and I'm going to have to do something about
> >
> > it sooner rather than later. What I'm planning on doing is replacing
> > the clutch master and slave cylinders. Have any of you worked on one of
> >
> > these things, and are there any nasty surprises I should look for? Jeep
> >
> > didn't do something stupid like put the slave cylinder inside the
> > bellhousing did they? I DON'T want to farm this out but this is my
> > daily driver and I can't have it down for any length of time.
> >
> > Thanks!
> >
> > Jeff DeWitt
--
Will Honea <whonea@codenet.net>
sure that the XJ went at the same time.
On Mon, 3 Nov 2003 05:51:38 UTC L.W.(ßill) ------ III
<----------@***.net> wrote:
> Hi Jeff,
> If it's the '95 YJ you have, then you have the internal frog
> slave: http://www.----------.com/YJslave.jpg If it's the '97 TJ then
> it's external like the Fords and Chevys have been using since the
> fifties: http://www.----------.com/slave.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Jeff DeWitt wrote:
> >
> > My 96 Jeep Cherokee (6, 5 speed) has a problem. The clutch has been
> > releasing closer to the
> > floor and some other car folks agreed with my belief that it is a
> > hydraulic problem
> >
> > The problem is getting worse and I'm going to have to do something about
> >
> > it sooner rather than later. What I'm planning on doing is replacing
> > the clutch master and slave cylinders. Have any of you worked on one of
> >
> > these things, and are there any nasty surprises I should look for? Jeep
> >
> > didn't do something stupid like put the slave cylinder inside the
> > bellhousing did they? I DON'T want to farm this out but this is my
> > daily driver and I can't have it down for any length of time.
> >
> > Thanks!
> >
> > Jeff DeWitt
--
Will Honea <whonea@codenet.net>
11-03-2003, 05:46 PM
#20
Guest
Posts: n/a
Re: Cherokee clutch problem
Thanks.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Will Honea wrote:
>
> Changeover to the external slave was '94 for the YJ and I'm pretty
> sure that the XJ went at the same time.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Will Honea wrote:
>
> Changeover to the external slave was '94 for the YJ and I'm pretty
> sure that the XJ went at the same time.
