Cherokee clutch problem
11-02-2003, 10:05 PM
#1
Guest
Posts: n/a
Cherokee clutch problem
My 96 Jeep Cherokee (6, 5 speed) has a problem. The clutch has been
releasing closer to the
floor and some other car folks agreed with my belief that it is a
hydraulic problem
The problem is getting worse and I'm going to have to do something about
it sooner rather than later. What I'm planning on doing is replacing
the clutch master and slave cylinders. Have any of you worked on one of
these things, and are there any nasty surprises I should look for? Jeep
didn't do something stupid like put the slave cylinder inside the
bellhousing did they? I DON'T want to farm this out but this is my
daily driver and I can't have it down for any length of time.
Thanks!
Jeff DeWitt
releasing closer to the
floor and some other car folks agreed with my belief that it is a
hydraulic problem
The problem is getting worse and I'm going to have to do something about
it sooner rather than later. What I'm planning on doing is replacing
the clutch master and slave cylinders. Have any of you worked on one of
these things, and are there any nasty surprises I should look for? Jeep
didn't do something stupid like put the slave cylinder inside the
bellhousing did they? I DON'T want to farm this out but this is my
daily driver and I can't have it down for any length of time.
Thanks!
Jeff DeWitt
11-03-2003, 12:51 AM
#2
Guest
Posts: n/a
Re: Cherokee clutch problem
Hi Jeff,
If it's the '95 YJ you have, then you have the internal frog
slave: http://www.----------.com/YJslave.jpg If it's the '97 TJ then
it's external like the Fords and Chevys have been using since the
fifties: http://www.----------.com/slave.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Jeff DeWitt wrote:
>
> My 96 Jeep Cherokee (6, 5 speed) has a problem. The clutch has been
> releasing closer to the
> floor and some other car folks agreed with my belief that it is a
> hydraulic problem
>
> The problem is getting worse and I'm going to have to do something about
>
> it sooner rather than later. What I'm planning on doing is replacing
> the clutch master and slave cylinders. Have any of you worked on one of
>
> these things, and are there any nasty surprises I should look for? Jeep
>
> didn't do something stupid like put the slave cylinder inside the
> bellhousing did they? I DON'T want to farm this out but this is my
> daily driver and I can't have it down for any length of time.
>
> Thanks!
>
> Jeff DeWitt
If it's the '95 YJ you have, then you have the internal frog
slave: http://www.----------.com/YJslave.jpg If it's the '97 TJ then
it's external like the Fords and Chevys have been using since the
fifties: http://www.----------.com/slave.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Jeff DeWitt wrote:
>
> My 96 Jeep Cherokee (6, 5 speed) has a problem. The clutch has been
> releasing closer to the
> floor and some other car folks agreed with my belief that it is a
> hydraulic problem
>
> The problem is getting worse and I'm going to have to do something about
>
> it sooner rather than later. What I'm planning on doing is replacing
> the clutch master and slave cylinders. Have any of you worked on one of
>
> these things, and are there any nasty surprises I should look for? Jeep
>
> didn't do something stupid like put the slave cylinder inside the
> bellhousing did they? I DON'T want to farm this out but this is my
> daily driver and I can't have it down for any length of time.
>
> Thanks!
>
> Jeff DeWitt
11-03-2003, 12:51 AM
#3
Guest
Posts: n/a
Re: Cherokee clutch problem
Hi Jeff,
If it's the '95 YJ you have, then you have the internal frog
slave: http://www.----------.com/YJslave.jpg If it's the '97 TJ then
it's external like the Fords and Chevys have been using since the
fifties: http://www.----------.com/slave.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Jeff DeWitt wrote:
>
> My 96 Jeep Cherokee (6, 5 speed) has a problem. The clutch has been
> releasing closer to the
> floor and some other car folks agreed with my belief that it is a
> hydraulic problem
>
> The problem is getting worse and I'm going to have to do something about
>
> it sooner rather than later. What I'm planning on doing is replacing
> the clutch master and slave cylinders. Have any of you worked on one of
>
> these things, and are there any nasty surprises I should look for? Jeep
>
> didn't do something stupid like put the slave cylinder inside the
> bellhousing did they? I DON'T want to farm this out but this is my
> daily driver and I can't have it down for any length of time.
>
> Thanks!
>
> Jeff DeWitt
If it's the '95 YJ you have, then you have the internal frog
slave: http://www.----------.com/YJslave.jpg If it's the '97 TJ then
it's external like the Fords and Chevys have been using since the
fifties: http://www.----------.com/slave.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Jeff DeWitt wrote:
>
> My 96 Jeep Cherokee (6, 5 speed) has a problem. The clutch has been
> releasing closer to the
> floor and some other car folks agreed with my belief that it is a
> hydraulic problem
>
> The problem is getting worse and I'm going to have to do something about
>
> it sooner rather than later. What I'm planning on doing is replacing
> the clutch master and slave cylinders. Have any of you worked on one of
>
> these things, and are there any nasty surprises I should look for? Jeep
>
> didn't do something stupid like put the slave cylinder inside the
> bellhousing did they? I DON'T want to farm this out but this is my
> daily driver and I can't have it down for any length of time.
>
> Thanks!
>
> Jeff DeWitt
11-03-2003, 12:51 AM
#4
Guest
Posts: n/a
Re: Cherokee clutch problem
Hi Jeff,
If it's the '95 YJ you have, then you have the internal frog
slave: http://www.----------.com/YJslave.jpg If it's the '97 TJ then
it's external like the Fords and Chevys have been using since the
fifties: http://www.----------.com/slave.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Jeff DeWitt wrote:
>
> My 96 Jeep Cherokee (6, 5 speed) has a problem. The clutch has been
> releasing closer to the
> floor and some other car folks agreed with my belief that it is a
> hydraulic problem
>
> The problem is getting worse and I'm going to have to do something about
>
> it sooner rather than later. What I'm planning on doing is replacing
> the clutch master and slave cylinders. Have any of you worked on one of
>
> these things, and are there any nasty surprises I should look for? Jeep
>
> didn't do something stupid like put the slave cylinder inside the
> bellhousing did they? I DON'T want to farm this out but this is my
> daily driver and I can't have it down for any length of time.
>
> Thanks!
>
> Jeff DeWitt
If it's the '95 YJ you have, then you have the internal frog
slave: http://www.----------.com/YJslave.jpg If it's the '97 TJ then
it's external like the Fords and Chevys have been using since the
fifties: http://www.----------.com/slave.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Jeff DeWitt wrote:
>
> My 96 Jeep Cherokee (6, 5 speed) has a problem. The clutch has been
> releasing closer to the
> floor and some other car folks agreed with my belief that it is a
> hydraulic problem
>
> The problem is getting worse and I'm going to have to do something about
>
> it sooner rather than later. What I'm planning on doing is replacing
> the clutch master and slave cylinders. Have any of you worked on one of
>
> these things, and are there any nasty surprises I should look for? Jeep
>
> didn't do something stupid like put the slave cylinder inside the
> bellhousing did they? I DON'T want to farm this out but this is my
> daily driver and I can't have it down for any length of time.
>
> Thanks!
>
> Jeff DeWitt
11-03-2003, 02:55 AM
#5
Guest
Posts: n/a
Re: Cherokee clutch problem
Ah, Bill, it's a '96XJ, look at the first sentence of the post...that said,
didn't the YJ changed to an external slave cylinder in the early 90's?
In article <3FA5ECEA.2A1B7250@***.net>, L.W.(=?iso-8859-1?Q?=DFill?=) ------
III <----------@***.net> writes:
>Hi Jeff,
> If it's the '95 YJ you have, then you have the internal frog
>slave: http://www.----------.com/YJslave.jpg If it's the '97 TJ then
>it's external like the Fords and Chevys have been using since the
>fifties: http://www.----------.com/slave.jpg
> God Bless America, ßill O|||||||O
>mailto:--------------------
>
>Jeff DeWitt wrote:
>>
>> My 96 Jeep Cherokee (6, 5 speed) has a problem. The clutch has been
>> releasing closer to the
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
didn't the YJ changed to an external slave cylinder in the early 90's?
In article <3FA5ECEA.2A1B7250@***.net>, L.W.(=?iso-8859-1?Q?=DFill?=) ------
III <----------@***.net> writes:
>Hi Jeff,
> If it's the '95 YJ you have, then you have the internal frog
>slave: http://www.----------.com/YJslave.jpg If it's the '97 TJ then
>it's external like the Fords and Chevys have been using since the
>fifties: http://www.----------.com/slave.jpg
> God Bless America, ßill O|||||||O
>mailto:--------------------
>
>Jeff DeWitt wrote:
>>
>> My 96 Jeep Cherokee (6, 5 speed) has a problem. The clutch has been
>> releasing closer to the
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
11-03-2003, 02:55 AM
#6
Guest
Posts: n/a
Re: Cherokee clutch problem
Ah, Bill, it's a '96XJ, look at the first sentence of the post...that said,
didn't the YJ changed to an external slave cylinder in the early 90's?
In article <3FA5ECEA.2A1B7250@***.net>, L.W.(=?iso-8859-1?Q?=DFill?=) ------
III <----------@***.net> writes:
>Hi Jeff,
> If it's the '95 YJ you have, then you have the internal frog
>slave: http://www.----------.com/YJslave.jpg If it's the '97 TJ then
>it's external like the Fords and Chevys have been using since the
>fifties: http://www.----------.com/slave.jpg
> God Bless America, ßill O|||||||O
>mailto:--------------------
>
>Jeff DeWitt wrote:
>>
>> My 96 Jeep Cherokee (6, 5 speed) has a problem. The clutch has been
>> releasing closer to the
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
didn't the YJ changed to an external slave cylinder in the early 90's?
In article <3FA5ECEA.2A1B7250@***.net>, L.W.(=?iso-8859-1?Q?=DFill?=) ------
III <----------@***.net> writes:
>Hi Jeff,
> If it's the '95 YJ you have, then you have the internal frog
>slave: http://www.----------.com/YJslave.jpg If it's the '97 TJ then
>it's external like the Fords and Chevys have been using since the
>fifties: http://www.----------.com/slave.jpg
> God Bless America, ßill O|||||||O
>mailto:--------------------
>
>Jeff DeWitt wrote:
>>
>> My 96 Jeep Cherokee (6, 5 speed) has a problem. The clutch has been
>> releasing closer to the
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
11-03-2003, 02:55 AM
#7
Guest
Posts: n/a
Re: Cherokee clutch problem
Ah, Bill, it's a '96XJ, look at the first sentence of the post...that said,
didn't the YJ changed to an external slave cylinder in the early 90's?
In article <3FA5ECEA.2A1B7250@***.net>, L.W.(=?iso-8859-1?Q?=DFill?=) ------
III <----------@***.net> writes:
>Hi Jeff,
> If it's the '95 YJ you have, then you have the internal frog
>slave: http://www.----------.com/YJslave.jpg If it's the '97 TJ then
>it's external like the Fords and Chevys have been using since the
>fifties: http://www.----------.com/slave.jpg
> God Bless America, ßill O|||||||O
>mailto:--------------------
>
>Jeff DeWitt wrote:
>>
>> My 96 Jeep Cherokee (6, 5 speed) has a problem. The clutch has been
>> releasing closer to the
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
didn't the YJ changed to an external slave cylinder in the early 90's?
In article <3FA5ECEA.2A1B7250@***.net>, L.W.(=?iso-8859-1?Q?=DFill?=) ------
III <----------@***.net> writes:
>Hi Jeff,
> If it's the '95 YJ you have, then you have the internal frog
>slave: http://www.----------.com/YJslave.jpg If it's the '97 TJ then
>it's external like the Fords and Chevys have been using since the
>fifties: http://www.----------.com/slave.jpg
> God Bless America, ßill O|||||||O
>mailto:--------------------
>
>Jeff DeWitt wrote:
>>
>> My 96 Jeep Cherokee (6, 5 speed) has a problem. The clutch has been
>> releasing closer to the
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
11-03-2003, 02:29 PM
#8
Guest
Posts: n/a
Re: Cherokee clutch problem
This is a pretty easy job. No need for any bleeding or anything. You just
buy the hydraulic system from Jeep and it comes with the slave all in a unit
that is self contained. Take the old off and put the new on. I just did
this a few months ago on my 96 XJ.
Curt
"Jeff DeWitt" <JeffDeWitt@nc.rr.com> wrote in message
news:3FA5C5D9.E0159D41@nc.rr.com...
> My 96 Jeep Cherokee (6, 5 speed) has a problem. The clutch has been
> releasing closer to the
> floor and some other car folks agreed with my belief that it is a
> hydraulic problem
>
> The problem is getting worse and I'm going to have to do something about
>
> it sooner rather than later. What I'm planning on doing is replacing
> the clutch master and slave cylinders. Have any of you worked on one of
>
> these things, and are there any nasty surprises I should look for? Jeep
>
> didn't do something stupid like put the slave cylinder inside the
> bellhousing did they? I DON'T want to farm this out but this is my
> daily driver and I can't have it down for any length of time.
>
> Thanks!
>
> Jeff DeWitt
>
>
>
buy the hydraulic system from Jeep and it comes with the slave all in a unit
that is self contained. Take the old off and put the new on. I just did
this a few months ago on my 96 XJ.
Curt
"Jeff DeWitt" <JeffDeWitt@nc.rr.com> wrote in message
news:3FA5C5D9.E0159D41@nc.rr.com...
> My 96 Jeep Cherokee (6, 5 speed) has a problem. The clutch has been
> releasing closer to the
> floor and some other car folks agreed with my belief that it is a
> hydraulic problem
>
> The problem is getting worse and I'm going to have to do something about
>
> it sooner rather than later. What I'm planning on doing is replacing
> the clutch master and slave cylinders. Have any of you worked on one of
>
> these things, and are there any nasty surprises I should look for? Jeep
>
> didn't do something stupid like put the slave cylinder inside the
> bellhousing did they? I DON'T want to farm this out but this is my
> daily driver and I can't have it down for any length of time.
>
> Thanks!
>
> Jeff DeWitt
>
>
>
11-03-2003, 02:29 PM
#9
Guest
Posts: n/a
Re: Cherokee clutch problem
This is a pretty easy job. No need for any bleeding or anything. You just
buy the hydraulic system from Jeep and it comes with the slave all in a unit
that is self contained. Take the old off and put the new on. I just did
this a few months ago on my 96 XJ.
Curt
"Jeff DeWitt" <JeffDeWitt@nc.rr.com> wrote in message
news:3FA5C5D9.E0159D41@nc.rr.com...
> My 96 Jeep Cherokee (6, 5 speed) has a problem. The clutch has been
> releasing closer to the
> floor and some other car folks agreed with my belief that it is a
> hydraulic problem
>
> The problem is getting worse and I'm going to have to do something about
>
> it sooner rather than later. What I'm planning on doing is replacing
> the clutch master and slave cylinders. Have any of you worked on one of
>
> these things, and are there any nasty surprises I should look for? Jeep
>
> didn't do something stupid like put the slave cylinder inside the
> bellhousing did they? I DON'T want to farm this out but this is my
> daily driver and I can't have it down for any length of time.
>
> Thanks!
>
> Jeff DeWitt
>
>
>
buy the hydraulic system from Jeep and it comes with the slave all in a unit
that is self contained. Take the old off and put the new on. I just did
this a few months ago on my 96 XJ.
Curt
"Jeff DeWitt" <JeffDeWitt@nc.rr.com> wrote in message
news:3FA5C5D9.E0159D41@nc.rr.com...
> My 96 Jeep Cherokee (6, 5 speed) has a problem. The clutch has been
> releasing closer to the
> floor and some other car folks agreed with my belief that it is a
> hydraulic problem
>
> The problem is getting worse and I'm going to have to do something about
>
> it sooner rather than later. What I'm planning on doing is replacing
> the clutch master and slave cylinders. Have any of you worked on one of
>
> these things, and are there any nasty surprises I should look for? Jeep
>
> didn't do something stupid like put the slave cylinder inside the
> bellhousing did they? I DON'T want to farm this out but this is my
> daily driver and I can't have it down for any length of time.
>
> Thanks!
>
> Jeff DeWitt
>
>
>
11-03-2003, 02:29 PM
#10
Guest
Posts: n/a
Re: Cherokee clutch problem
This is a pretty easy job. No need for any bleeding or anything. You just
buy the hydraulic system from Jeep and it comes with the slave all in a unit
that is self contained. Take the old off and put the new on. I just did
this a few months ago on my 96 XJ.
Curt
"Jeff DeWitt" <JeffDeWitt@nc.rr.com> wrote in message
news:3FA5C5D9.E0159D41@nc.rr.com...
> My 96 Jeep Cherokee (6, 5 speed) has a problem. The clutch has been
> releasing closer to the
> floor and some other car folks agreed with my belief that it is a
> hydraulic problem
>
> The problem is getting worse and I'm going to have to do something about
>
> it sooner rather than later. What I'm planning on doing is replacing
> the clutch master and slave cylinders. Have any of you worked on one of
>
> these things, and are there any nasty surprises I should look for? Jeep
>
> didn't do something stupid like put the slave cylinder inside the
> bellhousing did they? I DON'T want to farm this out but this is my
> daily driver and I can't have it down for any length of time.
>
> Thanks!
>
> Jeff DeWitt
>
>
>
buy the hydraulic system from Jeep and it comes with the slave all in a unit
that is self contained. Take the old off and put the new on. I just did
this a few months ago on my 96 XJ.
Curt
"Jeff DeWitt" <JeffDeWitt@nc.rr.com> wrote in message
news:3FA5C5D9.E0159D41@nc.rr.com...
> My 96 Jeep Cherokee (6, 5 speed) has a problem. The clutch has been
> releasing closer to the
> floor and some other car folks agreed with my belief that it is a
> hydraulic problem
>
> The problem is getting worse and I'm going to have to do something about
>
> it sooner rather than later. What I'm planning on doing is replacing
> the clutch master and slave cylinders. Have any of you worked on one of
>
> these things, and are there any nasty surprises I should look for? Jeep
>
> didn't do something stupid like put the slave cylinder inside the
> bellhousing did they? I DON'T want to farm this out but this is my
> daily driver and I can't have it down for any length of time.
>
> Thanks!
>
> Jeff DeWitt
>
>
>
