Hi & Thanks,
Well I had a place who bends my tubes & my buddy welded it together & we both
cut & fabricated together but, I designed it though.
As for the front hoop also known as an Endo-Stinger hoop. That aids for a few
things 1st: on a very steep incline a jeep may want to flip forward calling
that an Endo. The hoop will aid by pushing the jeepback to stable ground. 2nd:
in a roll-over situation it will aid to protect the hood & also making it easy
to rollback on all 4 tires.
I also added a hoodguard for extra protection incase of a roll it will protect
my radiator so I can hopefully get back home.
If you noticed I didn't tie in/weld in the hoodguard to the tubefender intime
i'll do that for extra support.
Note: Having armor/protection for yourself,your passangers & your jeep is the
best investment to do!
Please buckle up & drive safely!

 

Like your flat fenders, first time I've seen someone put the sidemarker in
front as a turn signal, unique.

I just installed a set of Poison Spyder tube fenders on my YJ. It was a lot
of fun to install them. Still need to rig up some form of sidemarkers but
haven't figure out how to do it yet.

"IGotADisneyJeep" <igotadisneyjeep@aol.com> wrote in message
news:20041108151206.12272.00000423@mb-m28.aol.com...
> Here is one of my sites that I am on with 2 new pics with My newly
> designed
> front bumper with endo/stinger & front hood guard. I also added a Flat
> tube
> fender by Metal Fusion then I upgraded the fenders with added parts to it.
> If
> you notice I also added a welded roll trail cage by Poison Spyder & I also
> added extra side,rear bars & added gussets to it.
> http://www.ok4wd.com/rprofile.asp?id=222

 

Like your flat fenders, first time I've seen someone put the sidemarker in
front as a turn signal, unique.

I just installed a set of Poison Spyder tube fenders on my YJ. It was a lot
of fun to install them. Still need to rig up some form of sidemarkers but
haven't figure out how to do it yet.

"IGotADisneyJeep" <igotadisneyjeep@aol.com> wrote in message
news:20041108151206.12272.00000423@mb-m28.aol.com...
> Here is one of my sites that I am on with 2 new pics with My newly
> designed
> front bumper with endo/stinger & front hood guard. I also added a Flat
> tube
> fender by Metal Fusion then I upgraded the fenders with added parts to it.
> If
> you notice I also added a welded roll trail cage by Poison Spyder & I also
> added extra side,rear bars & added gussets to it.
> http://www.ok4wd.com/rprofile.asp?id=222

 

Like your flat fenders, first time I've seen someone put the sidemarker in
front as a turn signal, unique.

I just installed a set of Poison Spyder tube fenders on my YJ. It was a lot
of fun to install them. Still need to rig up some form of sidemarkers but
haven't figure out how to do it yet.

"IGotADisneyJeep" <igotadisneyjeep@aol.com> wrote in message
news:20041108151206.12272.00000423@mb-m28.aol.com...
> Here is one of my sites that I am on with 2 new pics with My newly
> designed
> front bumper with endo/stinger & front hood guard. I also added a Flat
> tube
> fender by Metal Fusion then I upgraded the fenders with added parts to it.
> If
> you notice I also added a welded roll trail cage by Poison Spyder & I also
> added extra side,rear bars & added gussets to it.
> http://www.ok4wd.com/rprofile.asp?id=222

 

"SoK66" <SoK66@frontier.net> wrote in message
news:cmr97u02ouq@enews1.newsguy.com...
> Like your flat fenders, first time I've seen someone put the sidemarker in
> front as a turn signal, unique.

Definitely not a good idea unless they are protected - as SoK66 did. All
three times I took my CJ7 out in September/October I smashed at least one
flare/fender. I probably should have invested in a front bumper like that
that protects that spot. Would have come in handy for my innate ability to
crush my fender wells somehow.

 

"SoK66" <SoK66@frontier.net> wrote in message
news:cmr97u02ouq@enews1.newsguy.com...
> Like your flat fenders, first time I've seen someone put the sidemarker in
> front as a turn signal, unique.

Definitely not a good idea unless they are protected - as SoK66 did. All
three times I took my CJ7 out in September/October I smashed at least one
flare/fender. I probably should have invested in a front bumper like that
that protects that spot. Would have come in handy for my innate ability to
crush my fender wells somehow.

 

"SoK66" <SoK66@frontier.net> wrote in message
news:cmr97u02ouq@enews1.newsguy.com...
> Like your flat fenders, first time I've seen someone put the sidemarker in
> front as a turn signal, unique.

Definitely not a good idea unless they are protected - as SoK66 did. All
three times I took my CJ7 out in September/October I smashed at least one
flare/fender. I probably should have invested in a front bumper like that
that protects that spot. Would have come in handy for my innate ability to
crush my fender wells somehow.