Cheap paint job
#11
Guest
Posts: n/a
Re: Cheap paint jobs
Didja ever see a tractor that shined at all?
Tractors are notorious for faded paint.
Personally I think that anyone who would paint ANY vehicle with a paint
brush or a roller- deserves what they get.
Sometimes they use a roller to repaint an old jeep top, that's a whole
nother ball of wax though. In that case you would want the orange peel
effect.
Kate
"Jeffrey DeWitt" <JeffDeWitt@nc.rr.com> wrote in message
news:45aae288$0$8972$4c368faf@roadrunner.com...
> More on cheap paint jobs...
>
> The discussion about roller painting got me curious about other
> alternatives.
>
> Anyone ever painted a Jeep with tractor paint?
>
> http://www.agri-supply.com/HTML/3000021.htm
>
> Most of this stuff seems to be made by Majic paint.
>
> http://majicpaints.com/products/deta...%2D0951+Series
>
> Jeff DeWitt
>
>
> Jeffrey DeWitt wrote:
>> We have been having a lively discussion over on the Studebaker newsgroup
>> about a really cheap method of painting a car someone has come up with.
>>
>>
>> http://tinylink.eu/Z0HHF
>>
>> (if that link doesn't work go to Google Groups and then
>> alt.autos.Studebaker and look for the "Roller Paint your Studebaker"
>> thread
>>
>> It involves using a product called "Tremclad", apparently a Canadian
>> version of Rustolioum, you thin it until it's a big thicker than water,
>> and then BRUSH it on the car (truck, Jeep) with a foam brush and 4" foam
>> rollers.
>>
>> http://board.moparts.org/ubbthreads/...0&fpart=1&vc=1
>> The idea is you give it two coats, wet sand the car, give it a couple
>> more coats, and repeat. Finally give the car a really good polishing and
>> a coat of wax.
>>
>> Obviously you don't want to do this on a show car but to make one look
>> presentable it might be worth a shot.
>>
>> Jeff DeWitt
Tractors are notorious for faded paint.
Personally I think that anyone who would paint ANY vehicle with a paint
brush or a roller- deserves what they get.
Sometimes they use a roller to repaint an old jeep top, that's a whole
nother ball of wax though. In that case you would want the orange peel
effect.
Kate
"Jeffrey DeWitt" <JeffDeWitt@nc.rr.com> wrote in message
news:45aae288$0$8972$4c368faf@roadrunner.com...
> More on cheap paint jobs...
>
> The discussion about roller painting got me curious about other
> alternatives.
>
> Anyone ever painted a Jeep with tractor paint?
>
> http://www.agri-supply.com/HTML/3000021.htm
>
> Most of this stuff seems to be made by Majic paint.
>
> http://majicpaints.com/products/deta...%2D0951+Series
>
> Jeff DeWitt
>
>
> Jeffrey DeWitt wrote:
>> We have been having a lively discussion over on the Studebaker newsgroup
>> about a really cheap method of painting a car someone has come up with.
>>
>>
>> http://tinylink.eu/Z0HHF
>>
>> (if that link doesn't work go to Google Groups and then
>> alt.autos.Studebaker and look for the "Roller Paint your Studebaker"
>> thread
>>
>> It involves using a product called "Tremclad", apparently a Canadian
>> version of Rustolioum, you thin it until it's a big thicker than water,
>> and then BRUSH it on the car (truck, Jeep) with a foam brush and 4" foam
>> rollers.
>>
>> http://board.moparts.org/ubbthreads/...0&fpart=1&vc=1
>> The idea is you give it two coats, wet sand the car, give it a couple
>> more coats, and repeat. Finally give the car a really good polishing and
>> a coat of wax.
>>
>> Obviously you don't want to do this on a show car but to make one look
>> presentable it might be worth a shot.
>>
>> Jeff DeWitt
#12
Guest
Posts: n/a
Re: Cheap paint jobs
Didja ever see a tractor that shined at all?
Tractors are notorious for faded paint.
Personally I think that anyone who would paint ANY vehicle with a paint
brush or a roller- deserves what they get.
Sometimes they use a roller to repaint an old jeep top, that's a whole
nother ball of wax though. In that case you would want the orange peel
effect.
Kate
"Jeffrey DeWitt" <JeffDeWitt@nc.rr.com> wrote in message
news:45aae288$0$8972$4c368faf@roadrunner.com...
> More on cheap paint jobs...
>
> The discussion about roller painting got me curious about other
> alternatives.
>
> Anyone ever painted a Jeep with tractor paint?
>
> http://www.agri-supply.com/HTML/3000021.htm
>
> Most of this stuff seems to be made by Majic paint.
>
> http://majicpaints.com/products/deta...%2D0951+Series
>
> Jeff DeWitt
>
>
> Jeffrey DeWitt wrote:
>> We have been having a lively discussion over on the Studebaker newsgroup
>> about a really cheap method of painting a car someone has come up with.
>>
>>
>> http://tinylink.eu/Z0HHF
>>
>> (if that link doesn't work go to Google Groups and then
>> alt.autos.Studebaker and look for the "Roller Paint your Studebaker"
>> thread
>>
>> It involves using a product called "Tremclad", apparently a Canadian
>> version of Rustolioum, you thin it until it's a big thicker than water,
>> and then BRUSH it on the car (truck, Jeep) with a foam brush and 4" foam
>> rollers.
>>
>> http://board.moparts.org/ubbthreads/...0&fpart=1&vc=1
>> The idea is you give it two coats, wet sand the car, give it a couple
>> more coats, and repeat. Finally give the car a really good polishing and
>> a coat of wax.
>>
>> Obviously you don't want to do this on a show car but to make one look
>> presentable it might be worth a shot.
>>
>> Jeff DeWitt
Tractors are notorious for faded paint.
Personally I think that anyone who would paint ANY vehicle with a paint
brush or a roller- deserves what they get.
Sometimes they use a roller to repaint an old jeep top, that's a whole
nother ball of wax though. In that case you would want the orange peel
effect.
Kate
"Jeffrey DeWitt" <JeffDeWitt@nc.rr.com> wrote in message
news:45aae288$0$8972$4c368faf@roadrunner.com...
> More on cheap paint jobs...
>
> The discussion about roller painting got me curious about other
> alternatives.
>
> Anyone ever painted a Jeep with tractor paint?
>
> http://www.agri-supply.com/HTML/3000021.htm
>
> Most of this stuff seems to be made by Majic paint.
>
> http://majicpaints.com/products/deta...%2D0951+Series
>
> Jeff DeWitt
>
>
> Jeffrey DeWitt wrote:
>> We have been having a lively discussion over on the Studebaker newsgroup
>> about a really cheap method of painting a car someone has come up with.
>>
>>
>> http://tinylink.eu/Z0HHF
>>
>> (if that link doesn't work go to Google Groups and then
>> alt.autos.Studebaker and look for the "Roller Paint your Studebaker"
>> thread
>>
>> It involves using a product called "Tremclad", apparently a Canadian
>> version of Rustolioum, you thin it until it's a big thicker than water,
>> and then BRUSH it on the car (truck, Jeep) with a foam brush and 4" foam
>> rollers.
>>
>> http://board.moparts.org/ubbthreads/...0&fpart=1&vc=1
>> The idea is you give it two coats, wet sand the car, give it a couple
>> more coats, and repeat. Finally give the car a really good polishing and
>> a coat of wax.
>>
>> Obviously you don't want to do this on a show car but to make one look
>> presentable it might be worth a shot.
>>
>> Jeff DeWitt
#13
Guest
Posts: n/a
Re: Cheap paint jobs
Didja ever see a tractor that shined at all?
Tractors are notorious for faded paint.
Personally I think that anyone who would paint ANY vehicle with a paint
brush or a roller- deserves what they get.
Sometimes they use a roller to repaint an old jeep top, that's a whole
nother ball of wax though. In that case you would want the orange peel
effect.
Kate
"Jeffrey DeWitt" <JeffDeWitt@nc.rr.com> wrote in message
news:45aae288$0$8972$4c368faf@roadrunner.com...
> More on cheap paint jobs...
>
> The discussion about roller painting got me curious about other
> alternatives.
>
> Anyone ever painted a Jeep with tractor paint?
>
> http://www.agri-supply.com/HTML/3000021.htm
>
> Most of this stuff seems to be made by Majic paint.
>
> http://majicpaints.com/products/deta...%2D0951+Series
>
> Jeff DeWitt
>
>
> Jeffrey DeWitt wrote:
>> We have been having a lively discussion over on the Studebaker newsgroup
>> about a really cheap method of painting a car someone has come up with.
>>
>>
>> http://tinylink.eu/Z0HHF
>>
>> (if that link doesn't work go to Google Groups and then
>> alt.autos.Studebaker and look for the "Roller Paint your Studebaker"
>> thread
>>
>> It involves using a product called "Tremclad", apparently a Canadian
>> version of Rustolioum, you thin it until it's a big thicker than water,
>> and then BRUSH it on the car (truck, Jeep) with a foam brush and 4" foam
>> rollers.
>>
>> http://board.moparts.org/ubbthreads/...0&fpart=1&vc=1
>> The idea is you give it two coats, wet sand the car, give it a couple
>> more coats, and repeat. Finally give the car a really good polishing and
>> a coat of wax.
>>
>> Obviously you don't want to do this on a show car but to make one look
>> presentable it might be worth a shot.
>>
>> Jeff DeWitt
Tractors are notorious for faded paint.
Personally I think that anyone who would paint ANY vehicle with a paint
brush or a roller- deserves what they get.
Sometimes they use a roller to repaint an old jeep top, that's a whole
nother ball of wax though. In that case you would want the orange peel
effect.
Kate
"Jeffrey DeWitt" <JeffDeWitt@nc.rr.com> wrote in message
news:45aae288$0$8972$4c368faf@roadrunner.com...
> More on cheap paint jobs...
>
> The discussion about roller painting got me curious about other
> alternatives.
>
> Anyone ever painted a Jeep with tractor paint?
>
> http://www.agri-supply.com/HTML/3000021.htm
>
> Most of this stuff seems to be made by Majic paint.
>
> http://majicpaints.com/products/deta...%2D0951+Series
>
> Jeff DeWitt
>
>
> Jeffrey DeWitt wrote:
>> We have been having a lively discussion over on the Studebaker newsgroup
>> about a really cheap method of painting a car someone has come up with.
>>
>>
>> http://tinylink.eu/Z0HHF
>>
>> (if that link doesn't work go to Google Groups and then
>> alt.autos.Studebaker and look for the "Roller Paint your Studebaker"
>> thread
>>
>> It involves using a product called "Tremclad", apparently a Canadian
>> version of Rustolioum, you thin it until it's a big thicker than water,
>> and then BRUSH it on the car (truck, Jeep) with a foam brush and 4" foam
>> rollers.
>>
>> http://board.moparts.org/ubbthreads/...0&fpart=1&vc=1
>> The idea is you give it two coats, wet sand the car, give it a couple
>> more coats, and repeat. Finally give the car a really good polishing and
>> a coat of wax.
>>
>> Obviously you don't want to do this on a show car but to make one look
>> presentable it might be worth a shot.
>>
>> Jeff DeWitt
#14
Guest
Posts: n/a
Re: Cheap paint jobs
And remember the Competition Orange of the sixties and into the
seventies with Jeeps and the Dodge Charger on the Dukes of Hazard:
http://www.modelsforsale.com/listphotos/AM8597.jpg was straight off the
International Harvester: http://www.toytractorshow.com/CIH.ht30.jpg
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"Jeffrey DeWitt" <JeffDeWitt@nc.rr.com> wrote in message
news:45aae288$0$8972$4c368faf@roadrunner.com...
> More on cheap paint jobs...
>
> The discussion about roller painting got me curious about other
> alternatives.
>
> Anyone ever painted a Jeep with tractor paint?
>
> http://www.agri-supply.com/HTML/3000021.htm
>
> Most of this stuff seems to be made by Majic paint.
>
> http://majicpaints.com/products/deta...%2D0951+Series
>
> Jeff DeWitt
--
Posted via a free Usenet account from http://www.teranews.com
seventies with Jeeps and the Dodge Charger on the Dukes of Hazard:
http://www.modelsforsale.com/listphotos/AM8597.jpg was straight off the
International Harvester: http://www.toytractorshow.com/CIH.ht30.jpg
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"Jeffrey DeWitt" <JeffDeWitt@nc.rr.com> wrote in message
news:45aae288$0$8972$4c368faf@roadrunner.com...
> More on cheap paint jobs...
>
> The discussion about roller painting got me curious about other
> alternatives.
>
> Anyone ever painted a Jeep with tractor paint?
>
> http://www.agri-supply.com/HTML/3000021.htm
>
> Most of this stuff seems to be made by Majic paint.
>
> http://majicpaints.com/products/deta...%2D0951+Series
>
> Jeff DeWitt
--
Posted via a free Usenet account from http://www.teranews.com
#15
Guest
Posts: n/a
Re: Cheap paint jobs
And remember the Competition Orange of the sixties and into the
seventies with Jeeps and the Dodge Charger on the Dukes of Hazard:
http://www.modelsforsale.com/listphotos/AM8597.jpg was straight off the
International Harvester: http://www.toytractorshow.com/CIH.ht30.jpg
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"Jeffrey DeWitt" <JeffDeWitt@nc.rr.com> wrote in message
news:45aae288$0$8972$4c368faf@roadrunner.com...
> More on cheap paint jobs...
>
> The discussion about roller painting got me curious about other
> alternatives.
>
> Anyone ever painted a Jeep with tractor paint?
>
> http://www.agri-supply.com/HTML/3000021.htm
>
> Most of this stuff seems to be made by Majic paint.
>
> http://majicpaints.com/products/deta...%2D0951+Series
>
> Jeff DeWitt
--
Posted via a free Usenet account from http://www.teranews.com
seventies with Jeeps and the Dodge Charger on the Dukes of Hazard:
http://www.modelsforsale.com/listphotos/AM8597.jpg was straight off the
International Harvester: http://www.toytractorshow.com/CIH.ht30.jpg
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"Jeffrey DeWitt" <JeffDeWitt@nc.rr.com> wrote in message
news:45aae288$0$8972$4c368faf@roadrunner.com...
> More on cheap paint jobs...
>
> The discussion about roller painting got me curious about other
> alternatives.
>
> Anyone ever painted a Jeep with tractor paint?
>
> http://www.agri-supply.com/HTML/3000021.htm
>
> Most of this stuff seems to be made by Majic paint.
>
> http://majicpaints.com/products/deta...%2D0951+Series
>
> Jeff DeWitt
--
Posted via a free Usenet account from http://www.teranews.com
#16
Guest
Posts: n/a
Re: Cheap paint jobs
And remember the Competition Orange of the sixties and into the
seventies with Jeeps and the Dodge Charger on the Dukes of Hazard:
http://www.modelsforsale.com/listphotos/AM8597.jpg was straight off the
International Harvester: http://www.toytractorshow.com/CIH.ht30.jpg
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"Jeffrey DeWitt" <JeffDeWitt@nc.rr.com> wrote in message
news:45aae288$0$8972$4c368faf@roadrunner.com...
> More on cheap paint jobs...
>
> The discussion about roller painting got me curious about other
> alternatives.
>
> Anyone ever painted a Jeep with tractor paint?
>
> http://www.agri-supply.com/HTML/3000021.htm
>
> Most of this stuff seems to be made by Majic paint.
>
> http://majicpaints.com/products/deta...%2D0951+Series
>
> Jeff DeWitt
--
Posted via a free Usenet account from http://www.teranews.com
seventies with Jeeps and the Dodge Charger on the Dukes of Hazard:
http://www.modelsforsale.com/listphotos/AM8597.jpg was straight off the
International Harvester: http://www.toytractorshow.com/CIH.ht30.jpg
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"Jeffrey DeWitt" <JeffDeWitt@nc.rr.com> wrote in message
news:45aae288$0$8972$4c368faf@roadrunner.com...
> More on cheap paint jobs...
>
> The discussion about roller painting got me curious about other
> alternatives.
>
> Anyone ever painted a Jeep with tractor paint?
>
> http://www.agri-supply.com/HTML/3000021.htm
>
> Most of this stuff seems to be made by Majic paint.
>
> http://majicpaints.com/products/deta...%2D0951+Series
>
> Jeff DeWitt
--
Posted via a free Usenet account from http://www.teranews.com
#17
Guest
Posts: n/a
Re: Cheap paint jobs
And remember the Competition Orange of the sixties and into the
seventies with Jeeps and the Dodge Charger on the Dukes of Hazard:
http://www.modelsforsale.com/listphotos/AM8597.jpg was straight off the
International Harvester: http://www.toytractorshow.com/CIH.ht30.jpg
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"Jeffrey DeWitt" <JeffDeWitt@nc.rr.com> wrote in message
news:45aae288$0$8972$4c368faf@roadrunner.com...
> More on cheap paint jobs...
>
> The discussion about roller painting got me curious about other
> alternatives.
>
> Anyone ever painted a Jeep with tractor paint?
>
> http://www.agri-supply.com/HTML/3000021.htm
>
> Most of this stuff seems to be made by Majic paint.
>
> http://majicpaints.com/products/deta...%2D0951+Series
>
> Jeff DeWitt
--
Posted via a free Usenet account from http://www.teranews.com
seventies with Jeeps and the Dodge Charger on the Dukes of Hazard:
http://www.modelsforsale.com/listphotos/AM8597.jpg was straight off the
International Harvester: http://www.toytractorshow.com/CIH.ht30.jpg
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"Jeffrey DeWitt" <JeffDeWitt@nc.rr.com> wrote in message
news:45aae288$0$8972$4c368faf@roadrunner.com...
> More on cheap paint jobs...
>
> The discussion about roller painting got me curious about other
> alternatives.
>
> Anyone ever painted a Jeep with tractor paint?
>
> http://www.agri-supply.com/HTML/3000021.htm
>
> Most of this stuff seems to be made by Majic paint.
>
> http://majicpaints.com/products/deta...%2D0951+Series
>
> Jeff DeWitt
--
Posted via a free Usenet account from http://www.teranews.com
#18
Guest
Posts: n/a
Re: Cheap paint jobs
Never did a Jeep, but I've used X-Rust equipment paint on an old Scout and
a couple of pickups with pretty good results - the paint held up well in
its' primary role of protecting the metal but I was never one who worried
about pretty shines. The bright red I used on the Scout is still about
the same color as when I put it on in 1974 - an old rancher out east of
town still runs it around the place - if you wipe the dirt/mud off. I also
tend to use neutral colors (like white) which are basically immune to
fade. They all held up well under the Colorado sun. Never win a show
prize, but that $20 a gallon paint was worth the effort for me. Took some
experimenting to get it thinned right for my setup.
On Sun, 14 Jan 2007 21:10:08 -0500, Jeffrey DeWitt wrote:
> More on cheap paint jobs...
>
> The discussion about roller painting got me curious about other
> alternatives.
>
> Anyone ever painted a Jeep with tractor paint?
>
> http://www.agri-supply.com/HTML/3000021.htm
>
> Most of this stuff seems to be made by Majic paint.
>
> http://majicpaints.com/products/deta...%2D0951+Series
>
> Jeff DeWitt
>
>
> Jeffrey DeWitt wrote:
>> We have been having a lively discussion over on the Studebaker newsgroup
>> about a really cheap method of painting a car someone has come up with.
>>
>>
>> http://tinylink.eu/Z0HHF
>>
>> (if that link doesn't work go to Google Groups and then
>> alt.autos.Studebaker and look for the "Roller Paint your Studebaker" thread
>>
>> It involves using a product called "Tremclad", apparently a Canadian
>> version of Rustolioum, you thin it until it's a big thicker than water,
>> and then BRUSH it on the car (truck, Jeep) with a foam brush and 4" foam
>> rollers.
>>
>> http://board.moparts.org/ubbthreads/...0&fpart=1&vc=1
>>
>>
>> The idea is you give it two coats, wet sand the car, give it a couple
>> more coats, and repeat. Finally give the car a really good polishing
>> and a coat of wax.
>>
>> Obviously you don't want to do this on a show car but to make one look
>> presentable it might be worth a shot.
>>
>> Jeff DeWitt
--
Will Honea <whonea@yahoo.com>
a couple of pickups with pretty good results - the paint held up well in
its' primary role of protecting the metal but I was never one who worried
about pretty shines. The bright red I used on the Scout is still about
the same color as when I put it on in 1974 - an old rancher out east of
town still runs it around the place - if you wipe the dirt/mud off. I also
tend to use neutral colors (like white) which are basically immune to
fade. They all held up well under the Colorado sun. Never win a show
prize, but that $20 a gallon paint was worth the effort for me. Took some
experimenting to get it thinned right for my setup.
On Sun, 14 Jan 2007 21:10:08 -0500, Jeffrey DeWitt wrote:
> More on cheap paint jobs...
>
> The discussion about roller painting got me curious about other
> alternatives.
>
> Anyone ever painted a Jeep with tractor paint?
>
> http://www.agri-supply.com/HTML/3000021.htm
>
> Most of this stuff seems to be made by Majic paint.
>
> http://majicpaints.com/products/deta...%2D0951+Series
>
> Jeff DeWitt
>
>
> Jeffrey DeWitt wrote:
>> We have been having a lively discussion over on the Studebaker newsgroup
>> about a really cheap method of painting a car someone has come up with.
>>
>>
>> http://tinylink.eu/Z0HHF
>>
>> (if that link doesn't work go to Google Groups and then
>> alt.autos.Studebaker and look for the "Roller Paint your Studebaker" thread
>>
>> It involves using a product called "Tremclad", apparently a Canadian
>> version of Rustolioum, you thin it until it's a big thicker than water,
>> and then BRUSH it on the car (truck, Jeep) with a foam brush and 4" foam
>> rollers.
>>
>> http://board.moparts.org/ubbthreads/...0&fpart=1&vc=1
>>
>>
>> The idea is you give it two coats, wet sand the car, give it a couple
>> more coats, and repeat. Finally give the car a really good polishing
>> and a coat of wax.
>>
>> Obviously you don't want to do this on a show car but to make one look
>> presentable it might be worth a shot.
>>
>> Jeff DeWitt
--
Will Honea <whonea@yahoo.com>
#19
Guest
Posts: n/a
Re: Cheap paint jobs
Never did a Jeep, but I've used X-Rust equipment paint on an old Scout and
a couple of pickups with pretty good results - the paint held up well in
its' primary role of protecting the metal but I was never one who worried
about pretty shines. The bright red I used on the Scout is still about
the same color as when I put it on in 1974 - an old rancher out east of
town still runs it around the place - if you wipe the dirt/mud off. I also
tend to use neutral colors (like white) which are basically immune to
fade. They all held up well under the Colorado sun. Never win a show
prize, but that $20 a gallon paint was worth the effort for me. Took some
experimenting to get it thinned right for my setup.
On Sun, 14 Jan 2007 21:10:08 -0500, Jeffrey DeWitt wrote:
> More on cheap paint jobs...
>
> The discussion about roller painting got me curious about other
> alternatives.
>
> Anyone ever painted a Jeep with tractor paint?
>
> http://www.agri-supply.com/HTML/3000021.htm
>
> Most of this stuff seems to be made by Majic paint.
>
> http://majicpaints.com/products/deta...%2D0951+Series
>
> Jeff DeWitt
>
>
> Jeffrey DeWitt wrote:
>> We have been having a lively discussion over on the Studebaker newsgroup
>> about a really cheap method of painting a car someone has come up with.
>>
>>
>> http://tinylink.eu/Z0HHF
>>
>> (if that link doesn't work go to Google Groups and then
>> alt.autos.Studebaker and look for the "Roller Paint your Studebaker" thread
>>
>> It involves using a product called "Tremclad", apparently a Canadian
>> version of Rustolioum, you thin it until it's a big thicker than water,
>> and then BRUSH it on the car (truck, Jeep) with a foam brush and 4" foam
>> rollers.
>>
>> http://board.moparts.org/ubbthreads/...0&fpart=1&vc=1
>>
>>
>> The idea is you give it two coats, wet sand the car, give it a couple
>> more coats, and repeat. Finally give the car a really good polishing
>> and a coat of wax.
>>
>> Obviously you don't want to do this on a show car but to make one look
>> presentable it might be worth a shot.
>>
>> Jeff DeWitt
--
Will Honea <whonea@yahoo.com>
a couple of pickups with pretty good results - the paint held up well in
its' primary role of protecting the metal but I was never one who worried
about pretty shines. The bright red I used on the Scout is still about
the same color as when I put it on in 1974 - an old rancher out east of
town still runs it around the place - if you wipe the dirt/mud off. I also
tend to use neutral colors (like white) which are basically immune to
fade. They all held up well under the Colorado sun. Never win a show
prize, but that $20 a gallon paint was worth the effort for me. Took some
experimenting to get it thinned right for my setup.
On Sun, 14 Jan 2007 21:10:08 -0500, Jeffrey DeWitt wrote:
> More on cheap paint jobs...
>
> The discussion about roller painting got me curious about other
> alternatives.
>
> Anyone ever painted a Jeep with tractor paint?
>
> http://www.agri-supply.com/HTML/3000021.htm
>
> Most of this stuff seems to be made by Majic paint.
>
> http://majicpaints.com/products/deta...%2D0951+Series
>
> Jeff DeWitt
>
>
> Jeffrey DeWitt wrote:
>> We have been having a lively discussion over on the Studebaker newsgroup
>> about a really cheap method of painting a car someone has come up with.
>>
>>
>> http://tinylink.eu/Z0HHF
>>
>> (if that link doesn't work go to Google Groups and then
>> alt.autos.Studebaker and look for the "Roller Paint your Studebaker" thread
>>
>> It involves using a product called "Tremclad", apparently a Canadian
>> version of Rustolioum, you thin it until it's a big thicker than water,
>> and then BRUSH it on the car (truck, Jeep) with a foam brush and 4" foam
>> rollers.
>>
>> http://board.moparts.org/ubbthreads/...0&fpart=1&vc=1
>>
>>
>> The idea is you give it two coats, wet sand the car, give it a couple
>> more coats, and repeat. Finally give the car a really good polishing
>> and a coat of wax.
>>
>> Obviously you don't want to do this on a show car but to make one look
>> presentable it might be worth a shot.
>>
>> Jeff DeWitt
--
Will Honea <whonea@yahoo.com>
#20
Guest
Posts: n/a
Re: Cheap paint jobs
Never did a Jeep, but I've used X-Rust equipment paint on an old Scout and
a couple of pickups with pretty good results - the paint held up well in
its' primary role of protecting the metal but I was never one who worried
about pretty shines. The bright red I used on the Scout is still about
the same color as when I put it on in 1974 - an old rancher out east of
town still runs it around the place - if you wipe the dirt/mud off. I also
tend to use neutral colors (like white) which are basically immune to
fade. They all held up well under the Colorado sun. Never win a show
prize, but that $20 a gallon paint was worth the effort for me. Took some
experimenting to get it thinned right for my setup.
On Sun, 14 Jan 2007 21:10:08 -0500, Jeffrey DeWitt wrote:
> More on cheap paint jobs...
>
> The discussion about roller painting got me curious about other
> alternatives.
>
> Anyone ever painted a Jeep with tractor paint?
>
> http://www.agri-supply.com/HTML/3000021.htm
>
> Most of this stuff seems to be made by Majic paint.
>
> http://majicpaints.com/products/deta...%2D0951+Series
>
> Jeff DeWitt
>
>
> Jeffrey DeWitt wrote:
>> We have been having a lively discussion over on the Studebaker newsgroup
>> about a really cheap method of painting a car someone has come up with.
>>
>>
>> http://tinylink.eu/Z0HHF
>>
>> (if that link doesn't work go to Google Groups and then
>> alt.autos.Studebaker and look for the "Roller Paint your Studebaker" thread
>>
>> It involves using a product called "Tremclad", apparently a Canadian
>> version of Rustolioum, you thin it until it's a big thicker than water,
>> and then BRUSH it on the car (truck, Jeep) with a foam brush and 4" foam
>> rollers.
>>
>> http://board.moparts.org/ubbthreads/...0&fpart=1&vc=1
>>
>>
>> The idea is you give it two coats, wet sand the car, give it a couple
>> more coats, and repeat. Finally give the car a really good polishing
>> and a coat of wax.
>>
>> Obviously you don't want to do this on a show car but to make one look
>> presentable it might be worth a shot.
>>
>> Jeff DeWitt
--
Will Honea <whonea@yahoo.com>
a couple of pickups with pretty good results - the paint held up well in
its' primary role of protecting the metal but I was never one who worried
about pretty shines. The bright red I used on the Scout is still about
the same color as when I put it on in 1974 - an old rancher out east of
town still runs it around the place - if you wipe the dirt/mud off. I also
tend to use neutral colors (like white) which are basically immune to
fade. They all held up well under the Colorado sun. Never win a show
prize, but that $20 a gallon paint was worth the effort for me. Took some
experimenting to get it thinned right for my setup.
On Sun, 14 Jan 2007 21:10:08 -0500, Jeffrey DeWitt wrote:
> More on cheap paint jobs...
>
> The discussion about roller painting got me curious about other
> alternatives.
>
> Anyone ever painted a Jeep with tractor paint?
>
> http://www.agri-supply.com/HTML/3000021.htm
>
> Most of this stuff seems to be made by Majic paint.
>
> http://majicpaints.com/products/deta...%2D0951+Series
>
> Jeff DeWitt
>
>
> Jeffrey DeWitt wrote:
>> We have been having a lively discussion over on the Studebaker newsgroup
>> about a really cheap method of painting a car someone has come up with.
>>
>>
>> http://tinylink.eu/Z0HHF
>>
>> (if that link doesn't work go to Google Groups and then
>> alt.autos.Studebaker and look for the "Roller Paint your Studebaker" thread
>>
>> It involves using a product called "Tremclad", apparently a Canadian
>> version of Rustolioum, you thin it until it's a big thicker than water,
>> and then BRUSH it on the car (truck, Jeep) with a foam brush and 4" foam
>> rollers.
>>
>> http://board.moparts.org/ubbthreads/...0&fpart=1&vc=1
>>
>>
>> The idea is you give it two coats, wet sand the car, give it a couple
>> more coats, and repeat. Finally give the car a really good polishing
>> and a coat of wax.
>>
>> Obviously you don't want to do this on a show car but to make one look
>> presentable it might be worth a shot.
>>
>> Jeff DeWitt
--
Will Honea <whonea@yahoo.com>