Changing front axle universals on '93 GC
Guest
Posts: n/a
Changing front axle universals on '93 GC
Recently it appears that one or both of the front universal joints on my
'93 GC are starting to go bad (117Kmi). Are they replaceable like a
typical universals (press them out or do I need to purchase rebuilt axle
stubs?
WB
'93 GC are starting to go bad (117Kmi). Are they replaceable like a
typical universals (press them out or do I need to purchase rebuilt axle
stubs?
WB
Guest
Posts: n/a
Re: Changing front axle universals on '93 GC
Walt Barie did pass the time by typing:
> Recently it appears that one or both of the front universal joints on my
> '93 GC are starting to go bad (117Kmi). Are they replaceable like a
> typical universals (press them out or do I need to purchase rebuilt axle
> stubs?
U joints or CV? I thought the 93 production run was only CV.
http://www.chryslerpartsdirect.com/moparonline.htm seems down
or I'd look.
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
> Recently it appears that one or both of the front universal joints on my
> '93 GC are starting to go bad (117Kmi). Are they replaceable like a
> typical universals (press them out or do I need to purchase rebuilt axle
> stubs?
U joints or CV? I thought the 93 production run was only CV.
http://www.chryslerpartsdirect.com/moparonline.htm seems down
or I'd look.
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
Guest
Posts: n/a
Re: Changing front axle universals on '93 GC
Walt Barie did pass the time by typing:
> Recently it appears that one or both of the front universal joints on my
> '93 GC are starting to go bad (117Kmi). Are they replaceable like a
> typical universals (press them out or do I need to purchase rebuilt axle
> stubs?
U joints or CV? I thought the 93 production run was only CV.
http://www.chryslerpartsdirect.com/moparonline.htm seems down
or I'd look.
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
> Recently it appears that one or both of the front universal joints on my
> '93 GC are starting to go bad (117Kmi). Are they replaceable like a
> typical universals (press them out or do I need to purchase rebuilt axle
> stubs?
U joints or CV? I thought the 93 production run was only CV.
http://www.chryslerpartsdirect.com/moparonline.htm seems down
or I'd look.
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
Guest
Posts: n/a
Re: Changing front axle universals on '93 GC
Walt Barie did pass the time by typing:
> Recently it appears that one or both of the front universal joints on my
> '93 GC are starting to go bad (117Kmi). Are they replaceable like a
> typical universals (press them out or do I need to purchase rebuilt axle
> stubs?
U joints or CV? I thought the 93 production run was only CV.
http://www.chryslerpartsdirect.com/moparonline.htm seems down
or I'd look.
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
> Recently it appears that one or both of the front universal joints on my
> '93 GC are starting to go bad (117Kmi). Are they replaceable like a
> typical universals (press them out or do I need to purchase rebuilt axle
> stubs?
U joints or CV? I thought the 93 production run was only CV.
http://www.chryslerpartsdirect.com/moparonline.htm seems down
or I'd look.
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
Guest
Posts: n/a
Re: Changing front axle universals on '93 GC
"DougW" <post.replies@invalid.address> wrote in message
news:hDMPd.8549$Ps.6432@okepread06...
> Walt Barie did pass the time by typing:
>> Recently it appears that one or both of the front universal joints on my
>> '93 GC are starting to go bad (117Kmi). Are they replaceable like a
>> typical universals (press them out or do I need to purchase rebuilt axle
>> stubs?
>
> U joints or CV? I thought the 93 production run was only CV.
>
> http://www.chryslerpartsdirect.com/moparonline.htm seems down
> or I'd look.
That was the question I was going to ask him. My '01 WJ GC had CV joints, I
wasn;t sure what they'd used on early ZJs.
Guest
Posts: n/a
Re: Changing front axle universals on '93 GC
"DougW" <post.replies@invalid.address> wrote in message
news:hDMPd.8549$Ps.6432@okepread06...
> Walt Barie did pass the time by typing:
>> Recently it appears that one or both of the front universal joints on my
>> '93 GC are starting to go bad (117Kmi). Are they replaceable like a
>> typical universals (press them out or do I need to purchase rebuilt axle
>> stubs?
>
> U joints or CV? I thought the 93 production run was only CV.
>
> http://www.chryslerpartsdirect.com/moparonline.htm seems down
> or I'd look.
That was the question I was going to ask him. My '01 WJ GC had CV joints, I
wasn;t sure what they'd used on early ZJs.
Guest
Posts: n/a
Re: Changing front axle universals on '93 GC
"DougW" <post.replies@invalid.address> wrote in message
news:hDMPd.8549$Ps.6432@okepread06...
> Walt Barie did pass the time by typing:
>> Recently it appears that one or both of the front universal joints on my
>> '93 GC are starting to go bad (117Kmi). Are they replaceable like a
>> typical universals (press them out or do I need to purchase rebuilt axle
>> stubs?
>
> U joints or CV? I thought the 93 production run was only CV.
>
> http://www.chryslerpartsdirect.com/moparonline.htm seems down
> or I'd look.
That was the question I was going to ask him. My '01 WJ GC had CV joints, I
wasn;t sure what they'd used on early ZJs.
Guest
Posts: n/a
Re: Changing front axle universals on '93 GC
Replaceable: http://www.----------.com/CVaxle.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
Walt Barie wrote:
>
> Recently it appears that one or both of the front universal joints on my
> '93 GC are starting to go bad (117Kmi). Are they replaceable like a
> typical universals (press them out or do I need to purchase rebuilt axle
> stubs?
>
> WB
God Bless America, ßill O|||||||O
mailto:--------------------
Walt Barie wrote:
>
> Recently it appears that one or both of the front universal joints on my
> '93 GC are starting to go bad (117Kmi). Are they replaceable like a
> typical universals (press them out or do I need to purchase rebuilt axle
> stubs?
>
> WB
Guest
Posts: n/a
Re: Changing front axle universals on '93 GC
Replaceable: http://www.----------.com/CVaxle.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
Walt Barie wrote:
>
> Recently it appears that one or both of the front universal joints on my
> '93 GC are starting to go bad (117Kmi). Are they replaceable like a
> typical universals (press them out or do I need to purchase rebuilt axle
> stubs?
>
> WB
God Bless America, ßill O|||||||O
mailto:--------------------
Walt Barie wrote:
>
> Recently it appears that one or both of the front universal joints on my
> '93 GC are starting to go bad (117Kmi). Are they replaceable like a
> typical universals (press them out or do I need to purchase rebuilt axle
> stubs?
>
> WB
Guest
Posts: n/a
Re: Changing front axle universals on '93 GC
Replaceable: http://www.----------.com/CVaxle.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
Walt Barie wrote:
>
> Recently it appears that one or both of the front universal joints on my
> '93 GC are starting to go bad (117Kmi). Are they replaceable like a
> typical universals (press them out or do I need to purchase rebuilt axle
> stubs?
>
> WB
God Bless America, ßill O|||||||O
mailto:--------------------
Walt Barie wrote:
>
> Recently it appears that one or both of the front universal joints on my
> '93 GC are starting to go bad (117Kmi). Are they replaceable like a
> typical universals (press them out or do I need to purchase rebuilt axle
> stubs?
>
> WB