CCV system
#11
Guest
Posts: n/a
Re: CCV system
Here is a good link on it:
http://www.off-road.com/jeep/cheroke...ltr/blowby.htm
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
DougW wrote:
>
> big95yj did pass the time by typing:
> > I was working on my 95 Jeep YJ and I found that there was a little bit
> > of oil in and around my throttle body. I decided that it was time to
> > inspect my pcv valve a little closer. But on going this direction, I
> > found that it does not have a pcv system, it has a ccv system.
>
> Yep
>
> > I also
> > read that there should be some sort of rubber insert in the end of the
> > tube in the valve cover.
>
> It's an orifice and it's located down in the plastic elbow. You know it
> is clogged when your air filter grows an oil stain.
>
> > However, when I pulled the tube and fitting
> > out of the vavle cover, there was no insert, just an open tube. I see
> > no way to keep oil from being sucked into the tube and then into the
> > intake manifold. Am I right about this and should I be concerned that
> > there is possibly something floating around in my valve train, or
> > should there not be anything in the end of the tube? I would appreciate
> > any help. Thanks.
>
> A little oil sneaking into the TB is normal, that's why folks have to
> clean the IAP every now and then to improve idle.
> http://members.***.net/wilsond/tb/tb.html
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
http://www.off-road.com/jeep/cheroke...ltr/blowby.htm
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
DougW wrote:
>
> big95yj did pass the time by typing:
> > I was working on my 95 Jeep YJ and I found that there was a little bit
> > of oil in and around my throttle body. I decided that it was time to
> > inspect my pcv valve a little closer. But on going this direction, I
> > found that it does not have a pcv system, it has a ccv system.
>
> Yep
>
> > I also
> > read that there should be some sort of rubber insert in the end of the
> > tube in the valve cover.
>
> It's an orifice and it's located down in the plastic elbow. You know it
> is clogged when your air filter grows an oil stain.
>
> > However, when I pulled the tube and fitting
> > out of the vavle cover, there was no insert, just an open tube. I see
> > no way to keep oil from being sucked into the tube and then into the
> > intake manifold. Am I right about this and should I be concerned that
> > there is possibly something floating around in my valve train, or
> > should there not be anything in the end of the tube? I would appreciate
> > any help. Thanks.
>
> A little oil sneaking into the TB is normal, that's why folks have to
> clean the IAP every now and then to improve idle.
> http://members.***.net/wilsond/tb/tb.html
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
#12
Guest
Posts: n/a
Re: CCV system
Here is a good link on it:
http://www.off-road.com/jeep/cheroke...ltr/blowby.htm
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
DougW wrote:
>
> big95yj did pass the time by typing:
> > I was working on my 95 Jeep YJ and I found that there was a little bit
> > of oil in and around my throttle body. I decided that it was time to
> > inspect my pcv valve a little closer. But on going this direction, I
> > found that it does not have a pcv system, it has a ccv system.
>
> Yep
>
> > I also
> > read that there should be some sort of rubber insert in the end of the
> > tube in the valve cover.
>
> It's an orifice and it's located down in the plastic elbow. You know it
> is clogged when your air filter grows an oil stain.
>
> > However, when I pulled the tube and fitting
> > out of the vavle cover, there was no insert, just an open tube. I see
> > no way to keep oil from being sucked into the tube and then into the
> > intake manifold. Am I right about this and should I be concerned that
> > there is possibly something floating around in my valve train, or
> > should there not be anything in the end of the tube? I would appreciate
> > any help. Thanks.
>
> A little oil sneaking into the TB is normal, that's why folks have to
> clean the IAP every now and then to improve idle.
> http://members.***.net/wilsond/tb/tb.html
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
http://www.off-road.com/jeep/cheroke...ltr/blowby.htm
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
DougW wrote:
>
> big95yj did pass the time by typing:
> > I was working on my 95 Jeep YJ and I found that there was a little bit
> > of oil in and around my throttle body. I decided that it was time to
> > inspect my pcv valve a little closer. But on going this direction, I
> > found that it does not have a pcv system, it has a ccv system.
>
> Yep
>
> > I also
> > read that there should be some sort of rubber insert in the end of the
> > tube in the valve cover.
>
> It's an orifice and it's located down in the plastic elbow. You know it
> is clogged when your air filter grows an oil stain.
>
> > However, when I pulled the tube and fitting
> > out of the vavle cover, there was no insert, just an open tube. I see
> > no way to keep oil from being sucked into the tube and then into the
> > intake manifold. Am I right about this and should I be concerned that
> > there is possibly something floating around in my valve train, or
> > should there not be anything in the end of the tube? I would appreciate
> > any help. Thanks.
>
> A little oil sneaking into the TB is normal, that's why folks have to
> clean the IAP every now and then to improve idle.
> http://members.***.net/wilsond/tb/tb.html
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
#13
Guest
Posts: n/a
Re: CCV system
Here is a good link on it:
http://www.off-road.com/jeep/cheroke...ltr/blowby.htm
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
DougW wrote:
>
> big95yj did pass the time by typing:
> > I was working on my 95 Jeep YJ and I found that there was a little bit
> > of oil in and around my throttle body. I decided that it was time to
> > inspect my pcv valve a little closer. But on going this direction, I
> > found that it does not have a pcv system, it has a ccv system.
>
> Yep
>
> > I also
> > read that there should be some sort of rubber insert in the end of the
> > tube in the valve cover.
>
> It's an orifice and it's located down in the plastic elbow. You know it
> is clogged when your air filter grows an oil stain.
>
> > However, when I pulled the tube and fitting
> > out of the vavle cover, there was no insert, just an open tube. I see
> > no way to keep oil from being sucked into the tube and then into the
> > intake manifold. Am I right about this and should I be concerned that
> > there is possibly something floating around in my valve train, or
> > should there not be anything in the end of the tube? I would appreciate
> > any help. Thanks.
>
> A little oil sneaking into the TB is normal, that's why folks have to
> clean the IAP every now and then to improve idle.
> http://members.***.net/wilsond/tb/tb.html
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
http://www.off-road.com/jeep/cheroke...ltr/blowby.htm
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
DougW wrote:
>
> big95yj did pass the time by typing:
> > I was working on my 95 Jeep YJ and I found that there was a little bit
> > of oil in and around my throttle body. I decided that it was time to
> > inspect my pcv valve a little closer. But on going this direction, I
> > found that it does not have a pcv system, it has a ccv system.
>
> Yep
>
> > I also
> > read that there should be some sort of rubber insert in the end of the
> > tube in the valve cover.
>
> It's an orifice and it's located down in the plastic elbow. You know it
> is clogged when your air filter grows an oil stain.
>
> > However, when I pulled the tube and fitting
> > out of the vavle cover, there was no insert, just an open tube. I see
> > no way to keep oil from being sucked into the tube and then into the
> > intake manifold. Am I right about this and should I be concerned that
> > there is possibly something floating around in my valve train, or
> > should there not be anything in the end of the tube? I would appreciate
> > any help. Thanks.
>
> A little oil sneaking into the TB is normal, that's why folks have to
> clean the IAP every now and then to improve idle.
> http://members.***.net/wilsond/tb/tb.html
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)