Hi
any help will be greatly appreciated. I have a 1997 Cherokee 5spd XJ
and I have the rear end from a 2000 Cherokee XJ with the automatic
transmission. That rear i believe has 3:55 gears and mine the 97 has
3:07 I want to put that whole rear in my truck. Can I do this. So far
I dont see any reason why I could not other than some concern about
low pinion verse high pinion which i coul not make any sense of.
Please I hope someone on here reading this will be able to help me
with this question

Mike N
Ny

 

The rear axle will be a bolt-in swap. The 2000XJ should have the 8.25 rear
axle, where the 97 has the dana 35. Be sure you grab the driveline from the
2000, just in case. Assuming both Jeeps are 4 wheel drive, you will not be
able to use it untill you swap the front axles or gears to match.

HTH

Carl



<mikeli89@aol.com> wrote in message
news:1173672051.634107.167160@t69g2000cwt.googlegr oups.com...
> Hi
> any help will be greatly appreciated. I have a 1997 Cherokee 5spd XJ
> and I have the rear end from a 2000 Cherokee XJ with the automatic
> transmission. That rear i believe has 3:55 gears and mine the 97 has
> 3:07 I want to put that whole rear in my truck. Can I do this. So far
> I dont see any reason why I could not other than some concern about
> low pinion verse high pinion which i coul not make any sense of.
> Please I hope someone on here reading this will be able to help me
> with this question
>
> Mike N
> Ny
>

 

The rear axle will be a bolt-in swap. The 2000XJ should have the 8.25 rear
axle, where the 97 has the dana 35. Be sure you grab the driveline from the
2000, just in case. Assuming both Jeeps are 4 wheel drive, you will not be
able to use it untill you swap the front axles or gears to match.

HTH

Carl



<mikeli89@aol.com> wrote in message
news:1173672051.634107.167160@t69g2000cwt.googlegr oups.com...
> Hi
> any help will be greatly appreciated. I have a 1997 Cherokee 5spd XJ
> and I have the rear end from a 2000 Cherokee XJ with the automatic
> transmission. That rear i believe has 3:55 gears and mine the 97 has
> 3:07 I want to put that whole rear in my truck. Can I do this. So far
> I dont see any reason why I could not other than some concern about
> low pinion verse high pinion which i coul not make any sense of.
> Please I hope someone on here reading this will be able to help me
> with this question
>
> Mike N
> Ny
>

 

The rear axle will be a bolt-in swap. The 2000XJ should have the 8.25 rear
axle, where the 97 has the dana 35. Be sure you grab the driveline from the
2000, just in case. Assuming both Jeeps are 4 wheel drive, you will not be
able to use it untill you swap the front axles or gears to match.

HTH

Carl



<mikeli89@aol.com> wrote in message
news:1173672051.634107.167160@t69g2000cwt.googlegr oups.com...
> Hi
> any help will be greatly appreciated. I have a 1997 Cherokee 5spd XJ
> and I have the rear end from a 2000 Cherokee XJ with the automatic
> transmission. That rear i believe has 3:55 gears and mine the 97 has
> 3:07 I want to put that whole rear in my truck. Can I do this. So far
> I dont see any reason why I could not other than some concern about
> low pinion verse high pinion which i coul not make any sense of.
> Please I hope someone on here reading this will be able to help me
> with this question
>
> Mike N
> Ny
>