CA Smog help
#11
Guest
Posts: n/a
Re: CA Smog help
In message <VeBwb.12895$Bk1.2429@fed1read05>, "Kevin in San Diego" wrote:
>I am running the original Cat but it shows no signs of clogging that I can
>tell. The O2 sensor was replaced four years ago.
>
>88XJ 4.0 non HO 180K miles or so.
>New wires, cap, distributor. Fresh oil change. New Air Filter. I had
>a friends shop put the smog sniffer on it. He says my CO is at 135.
>It should be less than 100 according to him. After doing some research the
>numbers don't match up to what I am reading. There are no CO numbers
>anything like that anywhere. I also need to go to a
>test only. This is the first year they ever made me do that. Does
>anyone know of a few things to try before I send it to someone to
>take all my money? I only have until the 8th of December. Anyone
>know of a reliable shop who can fix it if I cant? I haven't changed
>the plugs in a while (30k miles maybe? don't), I will do that for
>good measure.
>I am running the original Cat but it shows no signs of clogging that I can
>tell. The O2 sensor was replaced four years ago.
>
> Would 89 octane help or hurt the process.
>Someone also mentioned an additive product once.
>KH
>
>
>
My guess is your friend is confusing CO and HC. The number you posted looks
more like HC. HC is measured in PPM. CO is measured in percent.
Catalytic converters do wear out, and 180k is a lot of miles. It's been my
experience that HC numbers are usually the first to get up over the pass/fail
cutoff as the cat gets older. Nothing scientific about my findings, that just
seems to be the way it goes most of the time.
O2 sensor failure is also pretty common. A good one will switch quickly between
0 and 5 volts.
Messing with octane *may* help *slightly* with a NOx problem, but will be no
help to you if you indeed have a HC problem.
A fresh tune couldn't hurt.
>I am running the original Cat but it shows no signs of clogging that I can
>tell. The O2 sensor was replaced four years ago.
>
>88XJ 4.0 non HO 180K miles or so.
>New wires, cap, distributor. Fresh oil change. New Air Filter. I had
>a friends shop put the smog sniffer on it. He says my CO is at 135.
>It should be less than 100 according to him. After doing some research the
>numbers don't match up to what I am reading. There are no CO numbers
>anything like that anywhere. I also need to go to a
>test only. This is the first year they ever made me do that. Does
>anyone know of a few things to try before I send it to someone to
>take all my money? I only have until the 8th of December. Anyone
>know of a reliable shop who can fix it if I cant? I haven't changed
>the plugs in a while (30k miles maybe? don't), I will do that for
>good measure.
>I am running the original Cat but it shows no signs of clogging that I can
>tell. The O2 sensor was replaced four years ago.
>
> Would 89 octane help or hurt the process.
>Someone also mentioned an additive product once.
>KH
>
>
>
My guess is your friend is confusing CO and HC. The number you posted looks
more like HC. HC is measured in PPM. CO is measured in percent.
Catalytic converters do wear out, and 180k is a lot of miles. It's been my
experience that HC numbers are usually the first to get up over the pass/fail
cutoff as the cat gets older. Nothing scientific about my findings, that just
seems to be the way it goes most of the time.
O2 sensor failure is also pretty common. A good one will switch quickly between
0 and 5 volts.
Messing with octane *may* help *slightly* with a NOx problem, but will be no
help to you if you indeed have a HC problem.
A fresh tune couldn't hurt.
#12
Guest
Posts: n/a
Re: CA Smog help
In message <VeBwb.12895$Bk1.2429@fed1read05>, "Kevin in San Diego" wrote:
>I am running the original Cat but it shows no signs of clogging that I can
>tell. The O2 sensor was replaced four years ago.
>
>88XJ 4.0 non HO 180K miles or so.
>New wires, cap, distributor. Fresh oil change. New Air Filter. I had
>a friends shop put the smog sniffer on it. He says my CO is at 135.
>It should be less than 100 according to him. After doing some research the
>numbers don't match up to what I am reading. There are no CO numbers
>anything like that anywhere. I also need to go to a
>test only. This is the first year they ever made me do that. Does
>anyone know of a few things to try before I send it to someone to
>take all my money? I only have until the 8th of December. Anyone
>know of a reliable shop who can fix it if I cant? I haven't changed
>the plugs in a while (30k miles maybe? don't), I will do that for
>good measure.
>I am running the original Cat but it shows no signs of clogging that I can
>tell. The O2 sensor was replaced four years ago.
>
> Would 89 octane help or hurt the process.
>Someone also mentioned an additive product once.
>KH
>
>
>
My guess is your friend is confusing CO and HC. The number you posted looks
more like HC. HC is measured in PPM. CO is measured in percent.
Catalytic converters do wear out, and 180k is a lot of miles. It's been my
experience that HC numbers are usually the first to get up over the pass/fail
cutoff as the cat gets older. Nothing scientific about my findings, that just
seems to be the way it goes most of the time.
O2 sensor failure is also pretty common. A good one will switch quickly between
0 and 5 volts.
Messing with octane *may* help *slightly* with a NOx problem, but will be no
help to you if you indeed have a HC problem.
A fresh tune couldn't hurt.
>I am running the original Cat but it shows no signs of clogging that I can
>tell. The O2 sensor was replaced four years ago.
>
>88XJ 4.0 non HO 180K miles or so.
>New wires, cap, distributor. Fresh oil change. New Air Filter. I had
>a friends shop put the smog sniffer on it. He says my CO is at 135.
>It should be less than 100 according to him. After doing some research the
>numbers don't match up to what I am reading. There are no CO numbers
>anything like that anywhere. I also need to go to a
>test only. This is the first year they ever made me do that. Does
>anyone know of a few things to try before I send it to someone to
>take all my money? I only have until the 8th of December. Anyone
>know of a reliable shop who can fix it if I cant? I haven't changed
>the plugs in a while (30k miles maybe? don't), I will do that for
>good measure.
>I am running the original Cat but it shows no signs of clogging that I can
>tell. The O2 sensor was replaced four years ago.
>
> Would 89 octane help or hurt the process.
>Someone also mentioned an additive product once.
>KH
>
>
>
My guess is your friend is confusing CO and HC. The number you posted looks
more like HC. HC is measured in PPM. CO is measured in percent.
Catalytic converters do wear out, and 180k is a lot of miles. It's been my
experience that HC numbers are usually the first to get up over the pass/fail
cutoff as the cat gets older. Nothing scientific about my findings, that just
seems to be the way it goes most of the time.
O2 sensor failure is also pretty common. A good one will switch quickly between
0 and 5 volts.
Messing with octane *may* help *slightly* with a NOx problem, but will be no
help to you if you indeed have a HC problem.
A fresh tune couldn't hurt.
#13
Guest
Posts: n/a
Re: CA Smog help
In message <VeBwb.12895$Bk1.2429@fed1read05>, "Kevin in San Diego" wrote:
>I am running the original Cat but it shows no signs of clogging that I can
>tell. The O2 sensor was replaced four years ago.
>
>88XJ 4.0 non HO 180K miles or so.
>New wires, cap, distributor. Fresh oil change. New Air Filter. I had
>a friends shop put the smog sniffer on it. He says my CO is at 135.
>It should be less than 100 according to him. After doing some research the
>numbers don't match up to what I am reading. There are no CO numbers
>anything like that anywhere. I also need to go to a
>test only. This is the first year they ever made me do that. Does
>anyone know of a few things to try before I send it to someone to
>take all my money? I only have until the 8th of December. Anyone
>know of a reliable shop who can fix it if I cant? I haven't changed
>the plugs in a while (30k miles maybe? don't), I will do that for
>good measure.
>I am running the original Cat but it shows no signs of clogging that I can
>tell. The O2 sensor was replaced four years ago.
>
> Would 89 octane help or hurt the process.
>Someone also mentioned an additive product once.
>KH
>
>
>
My guess is your friend is confusing CO and HC. The number you posted looks
more like HC. HC is measured in PPM. CO is measured in percent.
Catalytic converters do wear out, and 180k is a lot of miles. It's been my
experience that HC numbers are usually the first to get up over the pass/fail
cutoff as the cat gets older. Nothing scientific about my findings, that just
seems to be the way it goes most of the time.
O2 sensor failure is also pretty common. A good one will switch quickly between
0 and 5 volts.
Messing with octane *may* help *slightly* with a NOx problem, but will be no
help to you if you indeed have a HC problem.
A fresh tune couldn't hurt.
>I am running the original Cat but it shows no signs of clogging that I can
>tell. The O2 sensor was replaced four years ago.
>
>88XJ 4.0 non HO 180K miles or so.
>New wires, cap, distributor. Fresh oil change. New Air Filter. I had
>a friends shop put the smog sniffer on it. He says my CO is at 135.
>It should be less than 100 according to him. After doing some research the
>numbers don't match up to what I am reading. There are no CO numbers
>anything like that anywhere. I also need to go to a
>test only. This is the first year they ever made me do that. Does
>anyone know of a few things to try before I send it to someone to
>take all my money? I only have until the 8th of December. Anyone
>know of a reliable shop who can fix it if I cant? I haven't changed
>the plugs in a while (30k miles maybe? don't), I will do that for
>good measure.
>I am running the original Cat but it shows no signs of clogging that I can
>tell. The O2 sensor was replaced four years ago.
>
> Would 89 octane help or hurt the process.
>Someone also mentioned an additive product once.
>KH
>
>
>
My guess is your friend is confusing CO and HC. The number you posted looks
more like HC. HC is measured in PPM. CO is measured in percent.
Catalytic converters do wear out, and 180k is a lot of miles. It's been my
experience that HC numbers are usually the first to get up over the pass/fail
cutoff as the cat gets older. Nothing scientific about my findings, that just
seems to be the way it goes most of the time.
O2 sensor failure is also pretty common. A good one will switch quickly between
0 and 5 volts.
Messing with octane *may* help *slightly* with a NOx problem, but will be no
help to you if you indeed have a HC problem.
A fresh tune couldn't hurt.
#14
Guest
Posts: n/a
Re: CA Smog help
thanks!
"bllsht" <nospam@invaliddot.net> wrote in message
news:0fa8svcfa40idnptuljbo2egajbmm46ecm@4ax.com...
> In message <VeBwb.12895$Bk1.2429@fed1read05>, "Kevin in San Diego" wrote:
>
> >I am running the original Cat but it shows no signs of clogging that I
can
> >tell. The O2 sensor was replaced four years ago.
> >
> >88XJ 4.0 non HO 180K miles or so.
> >New wires, cap, distributor. Fresh oil change. New Air Filter. I had
> >a friends shop put the smog sniffer on it. He says my CO is at 135.
> >It should be less than 100 according to him. After doing some research
the
> >numbers don't match up to what I am reading. There are no CO numbers
> >anything like that anywhere. I also need to go to a
> >test only. This is the first year they ever made me do that. Does
> >anyone know of a few things to try before I send it to someone to
> >take all my money? I only have until the 8th of December. Anyone
> >know of a reliable shop who can fix it if I cant? I haven't changed
> >the plugs in a while (30k miles maybe? don't), I will do that for
> >good measure.
> >I am running the original Cat but it shows no signs of clogging that I
can
> >tell. The O2 sensor was replaced four years ago.
> >
> > Would 89 octane help or hurt the process.
> >Someone also mentioned an additive product once.
> >KH
> >
> >
> >
>
> My guess is your friend is confusing CO and HC. The number you posted
looks
> more like HC. HC is measured in PPM. CO is measured in percent.
>
> Catalytic converters do wear out, and 180k is a lot of miles. It's been
my
> experience that HC numbers are usually the first to get up over the
pass/fail
> cutoff as the cat gets older. Nothing scientific about my findings, that
just
> seems to be the way it goes most of the time.
>
> O2 sensor failure is also pretty common. A good one will switch quickly
between
> 0 and 5 volts.
>
> Messing with octane *may* help *slightly* with a NOx problem, but will be
no
> help to you if you indeed have a HC problem.
>
> A fresh tune couldn't hurt.
>
"bllsht" <nospam@invaliddot.net> wrote in message
news:0fa8svcfa40idnptuljbo2egajbmm46ecm@4ax.com...
> In message <VeBwb.12895$Bk1.2429@fed1read05>, "Kevin in San Diego" wrote:
>
> >I am running the original Cat but it shows no signs of clogging that I
can
> >tell. The O2 sensor was replaced four years ago.
> >
> >88XJ 4.0 non HO 180K miles or so.
> >New wires, cap, distributor. Fresh oil change. New Air Filter. I had
> >a friends shop put the smog sniffer on it. He says my CO is at 135.
> >It should be less than 100 according to him. After doing some research
the
> >numbers don't match up to what I am reading. There are no CO numbers
> >anything like that anywhere. I also need to go to a
> >test only. This is the first year they ever made me do that. Does
> >anyone know of a few things to try before I send it to someone to
> >take all my money? I only have until the 8th of December. Anyone
> >know of a reliable shop who can fix it if I cant? I haven't changed
> >the plugs in a while (30k miles maybe? don't), I will do that for
> >good measure.
> >I am running the original Cat but it shows no signs of clogging that I
can
> >tell. The O2 sensor was replaced four years ago.
> >
> > Would 89 octane help or hurt the process.
> >Someone also mentioned an additive product once.
> >KH
> >
> >
> >
>
> My guess is your friend is confusing CO and HC. The number you posted
looks
> more like HC. HC is measured in PPM. CO is measured in percent.
>
> Catalytic converters do wear out, and 180k is a lot of miles. It's been
my
> experience that HC numbers are usually the first to get up over the
pass/fail
> cutoff as the cat gets older. Nothing scientific about my findings, that
just
> seems to be the way it goes most of the time.
>
> O2 sensor failure is also pretty common. A good one will switch quickly
between
> 0 and 5 volts.
>
> Messing with octane *may* help *slightly* with a NOx problem, but will be
no
> help to you if you indeed have a HC problem.
>
> A fresh tune couldn't hurt.
>
#15
Guest
Posts: n/a
Re: CA Smog help
thanks!
"bllsht" <nospam@invaliddot.net> wrote in message
news:0fa8svcfa40idnptuljbo2egajbmm46ecm@4ax.com...
> In message <VeBwb.12895$Bk1.2429@fed1read05>, "Kevin in San Diego" wrote:
>
> >I am running the original Cat but it shows no signs of clogging that I
can
> >tell. The O2 sensor was replaced four years ago.
> >
> >88XJ 4.0 non HO 180K miles or so.
> >New wires, cap, distributor. Fresh oil change. New Air Filter. I had
> >a friends shop put the smog sniffer on it. He says my CO is at 135.
> >It should be less than 100 according to him. After doing some research
the
> >numbers don't match up to what I am reading. There are no CO numbers
> >anything like that anywhere. I also need to go to a
> >test only. This is the first year they ever made me do that. Does
> >anyone know of a few things to try before I send it to someone to
> >take all my money? I only have until the 8th of December. Anyone
> >know of a reliable shop who can fix it if I cant? I haven't changed
> >the plugs in a while (30k miles maybe? don't), I will do that for
> >good measure.
> >I am running the original Cat but it shows no signs of clogging that I
can
> >tell. The O2 sensor was replaced four years ago.
> >
> > Would 89 octane help or hurt the process.
> >Someone also mentioned an additive product once.
> >KH
> >
> >
> >
>
> My guess is your friend is confusing CO and HC. The number you posted
looks
> more like HC. HC is measured in PPM. CO is measured in percent.
>
> Catalytic converters do wear out, and 180k is a lot of miles. It's been
my
> experience that HC numbers are usually the first to get up over the
pass/fail
> cutoff as the cat gets older. Nothing scientific about my findings, that
just
> seems to be the way it goes most of the time.
>
> O2 sensor failure is also pretty common. A good one will switch quickly
between
> 0 and 5 volts.
>
> Messing with octane *may* help *slightly* with a NOx problem, but will be
no
> help to you if you indeed have a HC problem.
>
> A fresh tune couldn't hurt.
>
"bllsht" <nospam@invaliddot.net> wrote in message
news:0fa8svcfa40idnptuljbo2egajbmm46ecm@4ax.com...
> In message <VeBwb.12895$Bk1.2429@fed1read05>, "Kevin in San Diego" wrote:
>
> >I am running the original Cat but it shows no signs of clogging that I
can
> >tell. The O2 sensor was replaced four years ago.
> >
> >88XJ 4.0 non HO 180K miles or so.
> >New wires, cap, distributor. Fresh oil change. New Air Filter. I had
> >a friends shop put the smog sniffer on it. He says my CO is at 135.
> >It should be less than 100 according to him. After doing some research
the
> >numbers don't match up to what I am reading. There are no CO numbers
> >anything like that anywhere. I also need to go to a
> >test only. This is the first year they ever made me do that. Does
> >anyone know of a few things to try before I send it to someone to
> >take all my money? I only have until the 8th of December. Anyone
> >know of a reliable shop who can fix it if I cant? I haven't changed
> >the plugs in a while (30k miles maybe? don't), I will do that for
> >good measure.
> >I am running the original Cat but it shows no signs of clogging that I
can
> >tell. The O2 sensor was replaced four years ago.
> >
> > Would 89 octane help or hurt the process.
> >Someone also mentioned an additive product once.
> >KH
> >
> >
> >
>
> My guess is your friend is confusing CO and HC. The number you posted
looks
> more like HC. HC is measured in PPM. CO is measured in percent.
>
> Catalytic converters do wear out, and 180k is a lot of miles. It's been
my
> experience that HC numbers are usually the first to get up over the
pass/fail
> cutoff as the cat gets older. Nothing scientific about my findings, that
just
> seems to be the way it goes most of the time.
>
> O2 sensor failure is also pretty common. A good one will switch quickly
between
> 0 and 5 volts.
>
> Messing with octane *may* help *slightly* with a NOx problem, but will be
no
> help to you if you indeed have a HC problem.
>
> A fresh tune couldn't hurt.
>
#16
Guest
Posts: n/a
Re: CA Smog help
thanks!
"bllsht" <nospam@invaliddot.net> wrote in message
news:0fa8svcfa40idnptuljbo2egajbmm46ecm@4ax.com...
> In message <VeBwb.12895$Bk1.2429@fed1read05>, "Kevin in San Diego" wrote:
>
> >I am running the original Cat but it shows no signs of clogging that I
can
> >tell. The O2 sensor was replaced four years ago.
> >
> >88XJ 4.0 non HO 180K miles or so.
> >New wires, cap, distributor. Fresh oil change. New Air Filter. I had
> >a friends shop put the smog sniffer on it. He says my CO is at 135.
> >It should be less than 100 according to him. After doing some research
the
> >numbers don't match up to what I am reading. There are no CO numbers
> >anything like that anywhere. I also need to go to a
> >test only. This is the first year they ever made me do that. Does
> >anyone know of a few things to try before I send it to someone to
> >take all my money? I only have until the 8th of December. Anyone
> >know of a reliable shop who can fix it if I cant? I haven't changed
> >the plugs in a while (30k miles maybe? don't), I will do that for
> >good measure.
> >I am running the original Cat but it shows no signs of clogging that I
can
> >tell. The O2 sensor was replaced four years ago.
> >
> > Would 89 octane help or hurt the process.
> >Someone also mentioned an additive product once.
> >KH
> >
> >
> >
>
> My guess is your friend is confusing CO and HC. The number you posted
looks
> more like HC. HC is measured in PPM. CO is measured in percent.
>
> Catalytic converters do wear out, and 180k is a lot of miles. It's been
my
> experience that HC numbers are usually the first to get up over the
pass/fail
> cutoff as the cat gets older. Nothing scientific about my findings, that
just
> seems to be the way it goes most of the time.
>
> O2 sensor failure is also pretty common. A good one will switch quickly
between
> 0 and 5 volts.
>
> Messing with octane *may* help *slightly* with a NOx problem, but will be
no
> help to you if you indeed have a HC problem.
>
> A fresh tune couldn't hurt.
>
"bllsht" <nospam@invaliddot.net> wrote in message
news:0fa8svcfa40idnptuljbo2egajbmm46ecm@4ax.com...
> In message <VeBwb.12895$Bk1.2429@fed1read05>, "Kevin in San Diego" wrote:
>
> >I am running the original Cat but it shows no signs of clogging that I
can
> >tell. The O2 sensor was replaced four years ago.
> >
> >88XJ 4.0 non HO 180K miles or so.
> >New wires, cap, distributor. Fresh oil change. New Air Filter. I had
> >a friends shop put the smog sniffer on it. He says my CO is at 135.
> >It should be less than 100 according to him. After doing some research
the
> >numbers don't match up to what I am reading. There are no CO numbers
> >anything like that anywhere. I also need to go to a
> >test only. This is the first year they ever made me do that. Does
> >anyone know of a few things to try before I send it to someone to
> >take all my money? I only have until the 8th of December. Anyone
> >know of a reliable shop who can fix it if I cant? I haven't changed
> >the plugs in a while (30k miles maybe? don't), I will do that for
> >good measure.
> >I am running the original Cat but it shows no signs of clogging that I
can
> >tell. The O2 sensor was replaced four years ago.
> >
> > Would 89 octane help or hurt the process.
> >Someone also mentioned an additive product once.
> >KH
> >
> >
> >
>
> My guess is your friend is confusing CO and HC. The number you posted
looks
> more like HC. HC is measured in PPM. CO is measured in percent.
>
> Catalytic converters do wear out, and 180k is a lot of miles. It's been
my
> experience that HC numbers are usually the first to get up over the
pass/fail
> cutoff as the cat gets older. Nothing scientific about my findings, that
just
> seems to be the way it goes most of the time.
>
> O2 sensor failure is also pretty common. A good one will switch quickly
between
> 0 and 5 volts.
>
> Messing with octane *may* help *slightly* with a NOx problem, but will be
no
> help to you if you indeed have a HC problem.
>
> A fresh tune couldn't hurt.
>
#17
Guest
Posts: n/a
Re: CA Smog help
It turns out my O2 sensor was busted. The ceramic was broken and the wires
were just hanging!. I popped a new one in and it passed!
KH
"Kevin in San Diego" <kevin_hedstrom@yahoo.com> wrote in message
news:01Zwb.18988$Bk1.12789@fed1read05...
> thanks!
>
> "bllsht" <nospam@invaliddot.net> wrote in message
> news:0fa8svcfa40idnptuljbo2egajbmm46ecm@4ax.com...
> > In message <VeBwb.12895$Bk1.2429@fed1read05>, "Kevin in San Diego"
wrote:
> >
> > >I am running the original Cat but it shows no signs of clogging that I
> can
> > >tell. The O2 sensor was replaced four years ago.
> > >
> > >88XJ 4.0 non HO 180K miles or so.
> > >New wires, cap, distributor. Fresh oil change. New Air Filter. I had
> > >a friends shop put the smog sniffer on it. He says my CO is at 135.
> > >It should be less than 100 according to him. After doing some research
> the
> > >numbers don't match up to what I am reading. There are no CO numbers
> > >anything like that anywhere. I also need to go to a
> > >test only. This is the first year they ever made me do that. Does
> > >anyone know of a few things to try before I send it to someone to
> > >take all my money? I only have until the 8th of December. Anyone
> > >know of a reliable shop who can fix it if I cant? I haven't changed
> > >the plugs in a while (30k miles maybe? don't), I will do that for
> > >good measure.
> > >I am running the original Cat but it shows no signs of clogging that I
> can
> > >tell. The O2 sensor was replaced four years ago.
> > >
> > > Would 89 octane help or hurt the process.
> > >Someone also mentioned an additive product once.
> > >KH
> > >
> > >
> > >
> >
> > My guess is your friend is confusing CO and HC. The number you posted
> looks
> > more like HC. HC is measured in PPM. CO is measured in percent.
> >
> > Catalytic converters do wear out, and 180k is a lot of miles. It's been
> my
> > experience that HC numbers are usually the first to get up over the
> pass/fail
> > cutoff as the cat gets older. Nothing scientific about my findings,
that
> just
> > seems to be the way it goes most of the time.
> >
> > O2 sensor failure is also pretty common. A good one will switch quickly
> between
> > 0 and 5 volts.
> >
> > Messing with octane *may* help *slightly* with a NOx problem, but will
be
> no
> > help to you if you indeed have a HC problem.
> >
> > A fresh tune couldn't hurt.
> >
>
>
were just hanging!. I popped a new one in and it passed!
KH
"Kevin in San Diego" <kevin_hedstrom@yahoo.com> wrote in message
news:01Zwb.18988$Bk1.12789@fed1read05...
> thanks!
>
> "bllsht" <nospam@invaliddot.net> wrote in message
> news:0fa8svcfa40idnptuljbo2egajbmm46ecm@4ax.com...
> > In message <VeBwb.12895$Bk1.2429@fed1read05>, "Kevin in San Diego"
wrote:
> >
> > >I am running the original Cat but it shows no signs of clogging that I
> can
> > >tell. The O2 sensor was replaced four years ago.
> > >
> > >88XJ 4.0 non HO 180K miles or so.
> > >New wires, cap, distributor. Fresh oil change. New Air Filter. I had
> > >a friends shop put the smog sniffer on it. He says my CO is at 135.
> > >It should be less than 100 according to him. After doing some research
> the
> > >numbers don't match up to what I am reading. There are no CO numbers
> > >anything like that anywhere. I also need to go to a
> > >test only. This is the first year they ever made me do that. Does
> > >anyone know of a few things to try before I send it to someone to
> > >take all my money? I only have until the 8th of December. Anyone
> > >know of a reliable shop who can fix it if I cant? I haven't changed
> > >the plugs in a while (30k miles maybe? don't), I will do that for
> > >good measure.
> > >I am running the original Cat but it shows no signs of clogging that I
> can
> > >tell. The O2 sensor was replaced four years ago.
> > >
> > > Would 89 octane help or hurt the process.
> > >Someone also mentioned an additive product once.
> > >KH
> > >
> > >
> > >
> >
> > My guess is your friend is confusing CO and HC. The number you posted
> looks
> > more like HC. HC is measured in PPM. CO is measured in percent.
> >
> > Catalytic converters do wear out, and 180k is a lot of miles. It's been
> my
> > experience that HC numbers are usually the first to get up over the
> pass/fail
> > cutoff as the cat gets older. Nothing scientific about my findings,
that
> just
> > seems to be the way it goes most of the time.
> >
> > O2 sensor failure is also pretty common. A good one will switch quickly
> between
> > 0 and 5 volts.
> >
> > Messing with octane *may* help *slightly* with a NOx problem, but will
be
> no
> > help to you if you indeed have a HC problem.
> >
> > A fresh tune couldn't hurt.
> >
>
>
#18
Guest
Posts: n/a
Re: CA Smog help
It turns out my O2 sensor was busted. The ceramic was broken and the wires
were just hanging!. I popped a new one in and it passed!
KH
"Kevin in San Diego" <kevin_hedstrom@yahoo.com> wrote in message
news:01Zwb.18988$Bk1.12789@fed1read05...
> thanks!
>
> "bllsht" <nospam@invaliddot.net> wrote in message
> news:0fa8svcfa40idnptuljbo2egajbmm46ecm@4ax.com...
> > In message <VeBwb.12895$Bk1.2429@fed1read05>, "Kevin in San Diego"
wrote:
> >
> > >I am running the original Cat but it shows no signs of clogging that I
> can
> > >tell. The O2 sensor was replaced four years ago.
> > >
> > >88XJ 4.0 non HO 180K miles or so.
> > >New wires, cap, distributor. Fresh oil change. New Air Filter. I had
> > >a friends shop put the smog sniffer on it. He says my CO is at 135.
> > >It should be less than 100 according to him. After doing some research
> the
> > >numbers don't match up to what I am reading. There are no CO numbers
> > >anything like that anywhere. I also need to go to a
> > >test only. This is the first year they ever made me do that. Does
> > >anyone know of a few things to try before I send it to someone to
> > >take all my money? I only have until the 8th of December. Anyone
> > >know of a reliable shop who can fix it if I cant? I haven't changed
> > >the plugs in a while (30k miles maybe? don't), I will do that for
> > >good measure.
> > >I am running the original Cat but it shows no signs of clogging that I
> can
> > >tell. The O2 sensor was replaced four years ago.
> > >
> > > Would 89 octane help or hurt the process.
> > >Someone also mentioned an additive product once.
> > >KH
> > >
> > >
> > >
> >
> > My guess is your friend is confusing CO and HC. The number you posted
> looks
> > more like HC. HC is measured in PPM. CO is measured in percent.
> >
> > Catalytic converters do wear out, and 180k is a lot of miles. It's been
> my
> > experience that HC numbers are usually the first to get up over the
> pass/fail
> > cutoff as the cat gets older. Nothing scientific about my findings,
that
> just
> > seems to be the way it goes most of the time.
> >
> > O2 sensor failure is also pretty common. A good one will switch quickly
> between
> > 0 and 5 volts.
> >
> > Messing with octane *may* help *slightly* with a NOx problem, but will
be
> no
> > help to you if you indeed have a HC problem.
> >
> > A fresh tune couldn't hurt.
> >
>
>
were just hanging!. I popped a new one in and it passed!
KH
"Kevin in San Diego" <kevin_hedstrom@yahoo.com> wrote in message
news:01Zwb.18988$Bk1.12789@fed1read05...
> thanks!
>
> "bllsht" <nospam@invaliddot.net> wrote in message
> news:0fa8svcfa40idnptuljbo2egajbmm46ecm@4ax.com...
> > In message <VeBwb.12895$Bk1.2429@fed1read05>, "Kevin in San Diego"
wrote:
> >
> > >I am running the original Cat but it shows no signs of clogging that I
> can
> > >tell. The O2 sensor was replaced four years ago.
> > >
> > >88XJ 4.0 non HO 180K miles or so.
> > >New wires, cap, distributor. Fresh oil change. New Air Filter. I had
> > >a friends shop put the smog sniffer on it. He says my CO is at 135.
> > >It should be less than 100 according to him. After doing some research
> the
> > >numbers don't match up to what I am reading. There are no CO numbers
> > >anything like that anywhere. I also need to go to a
> > >test only. This is the first year they ever made me do that. Does
> > >anyone know of a few things to try before I send it to someone to
> > >take all my money? I only have until the 8th of December. Anyone
> > >know of a reliable shop who can fix it if I cant? I haven't changed
> > >the plugs in a while (30k miles maybe? don't), I will do that for
> > >good measure.
> > >I am running the original Cat but it shows no signs of clogging that I
> can
> > >tell. The O2 sensor was replaced four years ago.
> > >
> > > Would 89 octane help or hurt the process.
> > >Someone also mentioned an additive product once.
> > >KH
> > >
> > >
> > >
> >
> > My guess is your friend is confusing CO and HC. The number you posted
> looks
> > more like HC. HC is measured in PPM. CO is measured in percent.
> >
> > Catalytic converters do wear out, and 180k is a lot of miles. It's been
> my
> > experience that HC numbers are usually the first to get up over the
> pass/fail
> > cutoff as the cat gets older. Nothing scientific about my findings,
that
> just
> > seems to be the way it goes most of the time.
> >
> > O2 sensor failure is also pretty common. A good one will switch quickly
> between
> > 0 and 5 volts.
> >
> > Messing with octane *may* help *slightly* with a NOx problem, but will
be
> no
> > help to you if you indeed have a HC problem.
> >
> > A fresh tune couldn't hurt.
> >
>
>
#19
Guest
Posts: n/a
Re: CA Smog help
It turns out my O2 sensor was busted. The ceramic was broken and the wires
were just hanging!. I popped a new one in and it passed!
KH
"Kevin in San Diego" <kevin_hedstrom@yahoo.com> wrote in message
news:01Zwb.18988$Bk1.12789@fed1read05...
> thanks!
>
> "bllsht" <nospam@invaliddot.net> wrote in message
> news:0fa8svcfa40idnptuljbo2egajbmm46ecm@4ax.com...
> > In message <VeBwb.12895$Bk1.2429@fed1read05>, "Kevin in San Diego"
wrote:
> >
> > >I am running the original Cat but it shows no signs of clogging that I
> can
> > >tell. The O2 sensor was replaced four years ago.
> > >
> > >88XJ 4.0 non HO 180K miles or so.
> > >New wires, cap, distributor. Fresh oil change. New Air Filter. I had
> > >a friends shop put the smog sniffer on it. He says my CO is at 135.
> > >It should be less than 100 according to him. After doing some research
> the
> > >numbers don't match up to what I am reading. There are no CO numbers
> > >anything like that anywhere. I also need to go to a
> > >test only. This is the first year they ever made me do that. Does
> > >anyone know of a few things to try before I send it to someone to
> > >take all my money? I only have until the 8th of December. Anyone
> > >know of a reliable shop who can fix it if I cant? I haven't changed
> > >the plugs in a while (30k miles maybe? don't), I will do that for
> > >good measure.
> > >I am running the original Cat but it shows no signs of clogging that I
> can
> > >tell. The O2 sensor was replaced four years ago.
> > >
> > > Would 89 octane help or hurt the process.
> > >Someone also mentioned an additive product once.
> > >KH
> > >
> > >
> > >
> >
> > My guess is your friend is confusing CO and HC. The number you posted
> looks
> > more like HC. HC is measured in PPM. CO is measured in percent.
> >
> > Catalytic converters do wear out, and 180k is a lot of miles. It's been
> my
> > experience that HC numbers are usually the first to get up over the
> pass/fail
> > cutoff as the cat gets older. Nothing scientific about my findings,
that
> just
> > seems to be the way it goes most of the time.
> >
> > O2 sensor failure is also pretty common. A good one will switch quickly
> between
> > 0 and 5 volts.
> >
> > Messing with octane *may* help *slightly* with a NOx problem, but will
be
> no
> > help to you if you indeed have a HC problem.
> >
> > A fresh tune couldn't hurt.
> >
>
>
were just hanging!. I popped a new one in and it passed!
KH
"Kevin in San Diego" <kevin_hedstrom@yahoo.com> wrote in message
news:01Zwb.18988$Bk1.12789@fed1read05...
> thanks!
>
> "bllsht" <nospam@invaliddot.net> wrote in message
> news:0fa8svcfa40idnptuljbo2egajbmm46ecm@4ax.com...
> > In message <VeBwb.12895$Bk1.2429@fed1read05>, "Kevin in San Diego"
wrote:
> >
> > >I am running the original Cat but it shows no signs of clogging that I
> can
> > >tell. The O2 sensor was replaced four years ago.
> > >
> > >88XJ 4.0 non HO 180K miles or so.
> > >New wires, cap, distributor. Fresh oil change. New Air Filter. I had
> > >a friends shop put the smog sniffer on it. He says my CO is at 135.
> > >It should be less than 100 according to him. After doing some research
> the
> > >numbers don't match up to what I am reading. There are no CO numbers
> > >anything like that anywhere. I also need to go to a
> > >test only. This is the first year they ever made me do that. Does
> > >anyone know of a few things to try before I send it to someone to
> > >take all my money? I only have until the 8th of December. Anyone
> > >know of a reliable shop who can fix it if I cant? I haven't changed
> > >the plugs in a while (30k miles maybe? don't), I will do that for
> > >good measure.
> > >I am running the original Cat but it shows no signs of clogging that I
> can
> > >tell. The O2 sensor was replaced four years ago.
> > >
> > > Would 89 octane help or hurt the process.
> > >Someone also mentioned an additive product once.
> > >KH
> > >
> > >
> > >
> >
> > My guess is your friend is confusing CO and HC. The number you posted
> looks
> > more like HC. HC is measured in PPM. CO is measured in percent.
> >
> > Catalytic converters do wear out, and 180k is a lot of miles. It's been
> my
> > experience that HC numbers are usually the first to get up over the
> pass/fail
> > cutoff as the cat gets older. Nothing scientific about my findings,
that
> just
> > seems to be the way it goes most of the time.
> >
> > O2 sensor failure is also pretty common. A good one will switch quickly
> between
> > 0 and 5 volts.
> >
> > Messing with octane *may* help *slightly* with a NOx problem, but will
be
> no
> > help to you if you indeed have a HC problem.
> >
> > A fresh tune couldn't hurt.
> >
>
>
#20
Guest
Posts: n/a
Re: CA Smog help
Cool! I bet it will pay for it's self shortly in gasoline savings.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Kevin in San Diego wrote:
>
> It turns out my O2 sensor was busted. The ceramic was broken and the wires
> were just hanging!. I popped a new one in and it passed!
> KH
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Kevin in San Diego wrote:
>
> It turns out my O2 sensor was busted. The ceramic was broken and the wires
> were just hanging!. I popped a new one in and it passed!
> KH