burning/leaking oil
03-27-2007, 11:45 AM
#21
Guest
Posts: n/a
Re: burning/leaking oil
sounds like good advice all around- ill try to scrounge up some money
to get a new valve cover gasket some time this week, and ill let you
folks know what happens. on my nonexistant salary, its hard enough to
buy gas to go to school, much less money for repairs. blew all my
money on my wreck last year.
to get a new valve cover gasket some time this week, and ill let you
folks know what happens. on my nonexistant salary, its hard enough to
buy gas to go to school, much less money for repairs. blew all my
money on my wreck last year.
03-27-2007, 11:45 AM
#22
Guest
Posts: n/a
Re: burning/leaking oil
sounds like good advice all around- ill try to scrounge up some money
to get a new valve cover gasket some time this week, and ill let you
folks know what happens. on my nonexistant salary, its hard enough to
buy gas to go to school, much less money for repairs. blew all my
money on my wreck last year.
to get a new valve cover gasket some time this week, and ill let you
folks know what happens. on my nonexistant salary, its hard enough to
buy gas to go to school, much less money for repairs. blew all my
money on my wreck last year.
03-27-2007, 12:11 PM
#23
Guest
Posts: n/a
Re: burning/leaking oil
petethepirate wrote:
> sounds like good advice all around- ill try to scrounge up some money
> to get a new valve cover gasket some time this week, and ill let you
> folks know what happens. on my nonexistant salary, its hard enough to
> buy gas to go to school, much less money for repairs. blew all my
> money on my wreck last year.
>
If you are even half way handy, it isn't hard to change a cover gasket.
You might even find no gasket exists, they only come glued onto a new cover.
If this is the case, then a 'really' good clean (even a fingerprint will
ruin the job) and then a bead of 'sensor safe' RTV will make a new
gasket for you. This should set you back about ten bucks in parts and
cleaning fluid....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
> sounds like good advice all around- ill try to scrounge up some money
> to get a new valve cover gasket some time this week, and ill let you
> folks know what happens. on my nonexistant salary, its hard enough to
> buy gas to go to school, much less money for repairs. blew all my
> money on my wreck last year.
>
If you are even half way handy, it isn't hard to change a cover gasket.
You might even find no gasket exists, they only come glued onto a new cover.
If this is the case, then a 'really' good clean (even a fingerprint will
ruin the job) and then a bead of 'sensor safe' RTV will make a new
gasket for you. This should set you back about ten bucks in parts and
cleaning fluid....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
03-27-2007, 12:11 PM
#24
Guest
Posts: n/a
Re: burning/leaking oil
petethepirate wrote:
> sounds like good advice all around- ill try to scrounge up some money
> to get a new valve cover gasket some time this week, and ill let you
> folks know what happens. on my nonexistant salary, its hard enough to
> buy gas to go to school, much less money for repairs. blew all my
> money on my wreck last year.
>
If you are even half way handy, it isn't hard to change a cover gasket.
You might even find no gasket exists, they only come glued onto a new cover.
If this is the case, then a 'really' good clean (even a fingerprint will
ruin the job) and then a bead of 'sensor safe' RTV will make a new
gasket for you. This should set you back about ten bucks in parts and
cleaning fluid....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
> sounds like good advice all around- ill try to scrounge up some money
> to get a new valve cover gasket some time this week, and ill let you
> folks know what happens. on my nonexistant salary, its hard enough to
> buy gas to go to school, much less money for repairs. blew all my
> money on my wreck last year.
>
If you are even half way handy, it isn't hard to change a cover gasket.
You might even find no gasket exists, they only come glued onto a new cover.
If this is the case, then a 'really' good clean (even a fingerprint will
ruin the job) and then a bead of 'sensor safe' RTV will make a new
gasket for you. This should set you back about ten bucks in parts and
cleaning fluid....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
03-27-2007, 12:11 PM
#25
Guest
Posts: n/a
Re: burning/leaking oil
petethepirate wrote:
> sounds like good advice all around- ill try to scrounge up some money
> to get a new valve cover gasket some time this week, and ill let you
> folks know what happens. on my nonexistant salary, its hard enough to
> buy gas to go to school, much less money for repairs. blew all my
> money on my wreck last year.
>
If you are even half way handy, it isn't hard to change a cover gasket.
You might even find no gasket exists, they only come glued onto a new cover.
If this is the case, then a 'really' good clean (even a fingerprint will
ruin the job) and then a bead of 'sensor safe' RTV will make a new
gasket for you. This should set you back about ten bucks in parts and
cleaning fluid....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
> sounds like good advice all around- ill try to scrounge up some money
> to get a new valve cover gasket some time this week, and ill let you
> folks know what happens. on my nonexistant salary, its hard enough to
> buy gas to go to school, much less money for repairs. blew all my
> money on my wreck last year.
>
If you are even half way handy, it isn't hard to change a cover gasket.
You might even find no gasket exists, they only come glued onto a new cover.
If this is the case, then a 'really' good clean (even a fingerprint will
ruin the job) and then a bead of 'sensor safe' RTV will make a new
gasket for you. This should set you back about ten bucks in parts and
cleaning fluid....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
03-27-2007, 01:12 PM
#26
Guest
Posts: n/a
Re: burning/leaking oil
"petethepirate" <petethepirate197@gmail.com> wrote in message
news:1175010351.987722.291030@y66g2000hsf.googlegr oups.com...
> sounds like good advice all around- ill try to scrounge up some money
> to get a new valve cover gasket some time this week, and ill let you
> folks know what happens. on my nonexistant salary, its hard enough to
> buy gas to go to school, much less money for repairs. blew all my
> money on my wreck last year.
>
Heh, try to scrounge up some money for that drain plug gasket too.
Earle
news:1175010351.987722.291030@y66g2000hsf.googlegr oups.com...
> sounds like good advice all around- ill try to scrounge up some money
> to get a new valve cover gasket some time this week, and ill let you
> folks know what happens. on my nonexistant salary, its hard enough to
> buy gas to go to school, much less money for repairs. blew all my
> money on my wreck last year.
>
Heh, try to scrounge up some money for that drain plug gasket too.
Earle
03-27-2007, 01:12 PM
#27
Guest
Posts: n/a
Re: burning/leaking oil
"petethepirate" <petethepirate197@gmail.com> wrote in message
news:1175010351.987722.291030@y66g2000hsf.googlegr oups.com...
> sounds like good advice all around- ill try to scrounge up some money
> to get a new valve cover gasket some time this week, and ill let you
> folks know what happens. on my nonexistant salary, its hard enough to
> buy gas to go to school, much less money for repairs. blew all my
> money on my wreck last year.
>
Heh, try to scrounge up some money for that drain plug gasket too.
Earle
news:1175010351.987722.291030@y66g2000hsf.googlegr oups.com...
> sounds like good advice all around- ill try to scrounge up some money
> to get a new valve cover gasket some time this week, and ill let you
> folks know what happens. on my nonexistant salary, its hard enough to
> buy gas to go to school, much less money for repairs. blew all my
> money on my wreck last year.
>
Heh, try to scrounge up some money for that drain plug gasket too.
Earle
03-27-2007, 01:12 PM
#28
Guest
Posts: n/a
Re: burning/leaking oil
"petethepirate" <petethepirate197@gmail.com> wrote in message
news:1175010351.987722.291030@y66g2000hsf.googlegr oups.com...
> sounds like good advice all around- ill try to scrounge up some money
> to get a new valve cover gasket some time this week, and ill let you
> folks know what happens. on my nonexistant salary, its hard enough to
> buy gas to go to school, much less money for repairs. blew all my
> money on my wreck last year.
>
Heh, try to scrounge up some money for that drain plug gasket too.
Earle
news:1175010351.987722.291030@y66g2000hsf.googlegr oups.com...
> sounds like good advice all around- ill try to scrounge up some money
> to get a new valve cover gasket some time this week, and ill let you
> folks know what happens. on my nonexistant salary, its hard enough to
> buy gas to go to school, much less money for repairs. blew all my
> money on my wreck last year.
>
Heh, try to scrounge up some money for that drain plug gasket too.
Earle
03-27-2007, 02:31 PM
#29
Guest
Posts: n/a
Re: burning/leaking oil
On Mar 27, 11:11 am, Mike Romain <roma...@sympatico.ca> wrote:
> petethepirate wrote:
> > sounds like good advice all around- ill try to scrounge up some money
> > to get a new valve cover gasket some time this week, and ill let you
> > folks know what happens. on my nonexistant salary, its hard enough to
> > buy gas to go to school, much less money for repairs. blew all my
> > money on my wreck last year.
>
> If you are even half way handy, it isn't hard to change a cover gasket.
>
> You might even find no gasket exists, they only come glued onto a new cover.
>
> If this is the case, then a 'really' good clean (even a fingerprint will
> ruin the job) and then a bead of 'sensor safe' RTV will make a new
> gasket for you. This should set you back about ten bucks in parts and
> cleaning fluid....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
> (More Off Road album links at bottom of the view page)
I used half a can of gasket cleaner, $3.50 for the can. And Fel-Pro
part # VS50022C-1 at AutoZone for $4.99. It took me about me about 2
beers while watching a basketball game to get the whole thing
finished. The oil filter adapter o-rings are less than 5 dollars.
> petethepirate wrote:
> > sounds like good advice all around- ill try to scrounge up some money
> > to get a new valve cover gasket some time this week, and ill let you
> > folks know what happens. on my nonexistant salary, its hard enough to
> > buy gas to go to school, much less money for repairs. blew all my
> > money on my wreck last year.
>
> If you are even half way handy, it isn't hard to change a cover gasket.
>
> You might even find no gasket exists, they only come glued onto a new cover.
>
> If this is the case, then a 'really' good clean (even a fingerprint will
> ruin the job) and then a bead of 'sensor safe' RTV will make a new
> gasket for you. This should set you back about ten bucks in parts and
> cleaning fluid....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
> (More Off Road album links at bottom of the view page)
I used half a can of gasket cleaner, $3.50 for the can. And Fel-Pro
part # VS50022C-1 at AutoZone for $4.99. It took me about me about 2
beers while watching a basketball game to get the whole thing
finished. The oil filter adapter o-rings are less than 5 dollars.
03-27-2007, 02:31 PM
#30
Guest
Posts: n/a
Re: burning/leaking oil
On Mar 27, 11:11 am, Mike Romain <roma...@sympatico.ca> wrote:
> petethepirate wrote:
> > sounds like good advice all around- ill try to scrounge up some money
> > to get a new valve cover gasket some time this week, and ill let you
> > folks know what happens. on my nonexistant salary, its hard enough to
> > buy gas to go to school, much less money for repairs. blew all my
> > money on my wreck last year.
>
> If you are even half way handy, it isn't hard to change a cover gasket.
>
> You might even find no gasket exists, they only come glued onto a new cover.
>
> If this is the case, then a 'really' good clean (even a fingerprint will
> ruin the job) and then a bead of 'sensor safe' RTV will make a new
> gasket for you. This should set you back about ten bucks in parts and
> cleaning fluid....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
> (More Off Road album links at bottom of the view page)
I used half a can of gasket cleaner, $3.50 for the can. And Fel-Pro
part # VS50022C-1 at AutoZone for $4.99. It took me about me about 2
beers while watching a basketball game to get the whole thing
finished. The oil filter adapter o-rings are less than 5 dollars.
> petethepirate wrote:
> > sounds like good advice all around- ill try to scrounge up some money
> > to get a new valve cover gasket some time this week, and ill let you
> > folks know what happens. on my nonexistant salary, its hard enough to
> > buy gas to go to school, much less money for repairs. blew all my
> > money on my wreck last year.
>
> If you are even half way handy, it isn't hard to change a cover gasket.
>
> You might even find no gasket exists, they only come glued onto a new cover.
>
> If this is the case, then a 'really' good clean (even a fingerprint will
> ruin the job) and then a bead of 'sensor safe' RTV will make a new
> gasket for you. This should set you back about ten bucks in parts and
> cleaning fluid....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590
> (More Off Road album links at bottom of the view page)
I used half a can of gasket cleaner, $3.50 for the can. And Fel-Pro
part # VS50022C-1 at AutoZone for $4.99. It took me about me about 2
beers while watching a basketball game to get the whole thing
finished. The oil filter adapter o-rings are less than 5 dollars.
