Broken Motor Mount
#51
Guest
Posts: n/a
Re: Broken Motor Mount
The motor mounts are the same, the tranny mount is different. I think I
'could' theoretically get a crossmember from a YJ and then use the YJ
tranny mount and also add skid protection - The stock XJ crossmember is
so freakin' tiny.
I think that'll have to wait, though. I'll just stick with the factory
stuff for now.
Thanks anyway, Roy.
RoyJ wrote:
> I just reread your post to say XJ, I was thinking YJ. Here is what I got:
> http://www.quadratec.com/products/56003_03.htm
> Other kits, just play with the last digit in the following URL's (1 to 8)
>
> http://www.quadratec.com/products/56003_02.htm
> http://www.quadratec.com/products/56003_01.htm
>
> But I **think** the side mounts might be the same, not sure on the tranny.
> This page indicates they are the same:
> http://www.quadratec.com/products/76057_856.htm
'could' theoretically get a crossmember from a YJ and then use the YJ
tranny mount and also add skid protection - The stock XJ crossmember is
so freakin' tiny.
I think that'll have to wait, though. I'll just stick with the factory
stuff for now.
Thanks anyway, Roy.
RoyJ wrote:
> I just reread your post to say XJ, I was thinking YJ. Here is what I got:
> http://www.quadratec.com/products/56003_03.htm
> Other kits, just play with the last digit in the following URL's (1 to 8)
>
> http://www.quadratec.com/products/56003_02.htm
> http://www.quadratec.com/products/56003_01.htm
>
> But I **think** the side mounts might be the same, not sure on the tranny.
> This page indicates they are the same:
> http://www.quadratec.com/products/76057_856.htm
#52
Guest
Posts: n/a
Re: Broken Motor Mount
The motor mounts are the same, the tranny mount is different. I think I
'could' theoretically get a crossmember from a YJ and then use the YJ
tranny mount and also add skid protection - The stock XJ crossmember is
so freakin' tiny.
I think that'll have to wait, though. I'll just stick with the factory
stuff for now.
Thanks anyway, Roy.
RoyJ wrote:
> I just reread your post to say XJ, I was thinking YJ. Here is what I got:
> http://www.quadratec.com/products/56003_03.htm
> Other kits, just play with the last digit in the following URL's (1 to 8)
>
> http://www.quadratec.com/products/56003_02.htm
> http://www.quadratec.com/products/56003_01.htm
>
> But I **think** the side mounts might be the same, not sure on the tranny.
> This page indicates they are the same:
> http://www.quadratec.com/products/76057_856.htm
'could' theoretically get a crossmember from a YJ and then use the YJ
tranny mount and also add skid protection - The stock XJ crossmember is
so freakin' tiny.
I think that'll have to wait, though. I'll just stick with the factory
stuff for now.
Thanks anyway, Roy.
RoyJ wrote:
> I just reread your post to say XJ, I was thinking YJ. Here is what I got:
> http://www.quadratec.com/products/56003_03.htm
> Other kits, just play with the last digit in the following URL's (1 to 8)
>
> http://www.quadratec.com/products/56003_02.htm
> http://www.quadratec.com/products/56003_01.htm
>
> But I **think** the side mounts might be the same, not sure on the tranny.
> This page indicates they are the same:
> http://www.quadratec.com/products/76057_856.htm
#53
Guest
Posts: n/a
Re: Broken Motor Mount
The motor mounts are the same, the tranny mount is different. I think I
'could' theoretically get a crossmember from a YJ and then use the YJ
tranny mount and also add skid protection - The stock XJ crossmember is
so freakin' tiny.
I think that'll have to wait, though. I'll just stick with the factory
stuff for now.
Thanks anyway, Roy.
RoyJ wrote:
> I just reread your post to say XJ, I was thinking YJ. Here is what I got:
> http://www.quadratec.com/products/56003_03.htm
> Other kits, just play with the last digit in the following URL's (1 to 8)
>
> http://www.quadratec.com/products/56003_02.htm
> http://www.quadratec.com/products/56003_01.htm
>
> But I **think** the side mounts might be the same, not sure on the tranny.
> This page indicates they are the same:
> http://www.quadratec.com/products/76057_856.htm
'could' theoretically get a crossmember from a YJ and then use the YJ
tranny mount and also add skid protection - The stock XJ crossmember is
so freakin' tiny.
I think that'll have to wait, though. I'll just stick with the factory
stuff for now.
Thanks anyway, Roy.
RoyJ wrote:
> I just reread your post to say XJ, I was thinking YJ. Here is what I got:
> http://www.quadratec.com/products/56003_03.htm
> Other kits, just play with the last digit in the following URL's (1 to 8)
>
> http://www.quadratec.com/products/56003_02.htm
> http://www.quadratec.com/products/56003_01.htm
>
> But I **think** the side mounts might be the same, not sure on the tranny.
> This page indicates they are the same:
> http://www.quadratec.com/products/76057_856.htm
#54
Guest
Posts: n/a
Re: Broken Motor Mount
Some XJ's have a skid plate similar to the YJ's. It's on the 'off road skid
package'. My first XJ had it, my YJ had it, my subsequent 2 XJ's and my TJ
did not have it.
Carl
"The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
news:eookt1$ebh$1@aioe.org...
> The motor mounts are the same, the tranny mount is different. I think I
> 'could' theoretically get a crossmember from a YJ and then use the YJ
> tranny mount and also add skid protection - The stock XJ crossmember is so
> freakin' tiny.
> I think that'll have to wait, though. I'll just stick with the factory
> stuff for now.
> Thanks anyway, Roy.
>
>
> RoyJ wrote:
>> I just reread your post to say XJ, I was thinking YJ. Here is what I
>> got:
>> http://www.quadratec.com/products/56003_03.htm
>> Other kits, just play with the last digit in the following URL's (1 to 8)
>>
>> http://www.quadratec.com/products/56003_02.htm
>> http://www.quadratec.com/products/56003_01.htm
>>
>> But I **think** the side mounts might be the same, not sure on the
>> tranny.
>> This page indicates they are the same:
>> http://www.quadratec.com/products/76057_856.htm
package'. My first XJ had it, my YJ had it, my subsequent 2 XJ's and my TJ
did not have it.
Carl
"The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
news:eookt1$ebh$1@aioe.org...
> The motor mounts are the same, the tranny mount is different. I think I
> 'could' theoretically get a crossmember from a YJ and then use the YJ
> tranny mount and also add skid protection - The stock XJ crossmember is so
> freakin' tiny.
> I think that'll have to wait, though. I'll just stick with the factory
> stuff for now.
> Thanks anyway, Roy.
>
>
> RoyJ wrote:
>> I just reread your post to say XJ, I was thinking YJ. Here is what I
>> got:
>> http://www.quadratec.com/products/56003_03.htm
>> Other kits, just play with the last digit in the following URL's (1 to 8)
>>
>> http://www.quadratec.com/products/56003_02.htm
>> http://www.quadratec.com/products/56003_01.htm
>>
>> But I **think** the side mounts might be the same, not sure on the
>> tranny.
>> This page indicates they are the same:
>> http://www.quadratec.com/products/76057_856.htm
#55
Guest
Posts: n/a
Re: Broken Motor Mount
Some XJ's have a skid plate similar to the YJ's. It's on the 'off road skid
package'. My first XJ had it, my YJ had it, my subsequent 2 XJ's and my TJ
did not have it.
Carl
"The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
news:eookt1$ebh$1@aioe.org...
> The motor mounts are the same, the tranny mount is different. I think I
> 'could' theoretically get a crossmember from a YJ and then use the YJ
> tranny mount and also add skid protection - The stock XJ crossmember is so
> freakin' tiny.
> I think that'll have to wait, though. I'll just stick with the factory
> stuff for now.
> Thanks anyway, Roy.
>
>
> RoyJ wrote:
>> I just reread your post to say XJ, I was thinking YJ. Here is what I
>> got:
>> http://www.quadratec.com/products/56003_03.htm
>> Other kits, just play with the last digit in the following URL's (1 to 8)
>>
>> http://www.quadratec.com/products/56003_02.htm
>> http://www.quadratec.com/products/56003_01.htm
>>
>> But I **think** the side mounts might be the same, not sure on the
>> tranny.
>> This page indicates they are the same:
>> http://www.quadratec.com/products/76057_856.htm
package'. My first XJ had it, my YJ had it, my subsequent 2 XJ's and my TJ
did not have it.
Carl
"The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
news:eookt1$ebh$1@aioe.org...
> The motor mounts are the same, the tranny mount is different. I think I
> 'could' theoretically get a crossmember from a YJ and then use the YJ
> tranny mount and also add skid protection - The stock XJ crossmember is so
> freakin' tiny.
> I think that'll have to wait, though. I'll just stick with the factory
> stuff for now.
> Thanks anyway, Roy.
>
>
> RoyJ wrote:
>> I just reread your post to say XJ, I was thinking YJ. Here is what I
>> got:
>> http://www.quadratec.com/products/56003_03.htm
>> Other kits, just play with the last digit in the following URL's (1 to 8)
>>
>> http://www.quadratec.com/products/56003_02.htm
>> http://www.quadratec.com/products/56003_01.htm
>>
>> But I **think** the side mounts might be the same, not sure on the
>> tranny.
>> This page indicates they are the same:
>> http://www.quadratec.com/products/76057_856.htm
#56
Guest
Posts: n/a
Re: Broken Motor Mount
Some XJ's have a skid plate similar to the YJ's. It's on the 'off road skid
package'. My first XJ had it, my YJ had it, my subsequent 2 XJ's and my TJ
did not have it.
Carl
"The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
news:eookt1$ebh$1@aioe.org...
> The motor mounts are the same, the tranny mount is different. I think I
> 'could' theoretically get a crossmember from a YJ and then use the YJ
> tranny mount and also add skid protection - The stock XJ crossmember is so
> freakin' tiny.
> I think that'll have to wait, though. I'll just stick with the factory
> stuff for now.
> Thanks anyway, Roy.
>
>
> RoyJ wrote:
>> I just reread your post to say XJ, I was thinking YJ. Here is what I
>> got:
>> http://www.quadratec.com/products/56003_03.htm
>> Other kits, just play with the last digit in the following URL's (1 to 8)
>>
>> http://www.quadratec.com/products/56003_02.htm
>> http://www.quadratec.com/products/56003_01.htm
>>
>> But I **think** the side mounts might be the same, not sure on the
>> tranny.
>> This page indicates they are the same:
>> http://www.quadratec.com/products/76057_856.htm
package'. My first XJ had it, my YJ had it, my subsequent 2 XJ's and my TJ
did not have it.
Carl
"The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
news:eookt1$ebh$1@aioe.org...
> The motor mounts are the same, the tranny mount is different. I think I
> 'could' theoretically get a crossmember from a YJ and then use the YJ
> tranny mount and also add skid protection - The stock XJ crossmember is so
> freakin' tiny.
> I think that'll have to wait, though. I'll just stick with the factory
> stuff for now.
> Thanks anyway, Roy.
>
>
> RoyJ wrote:
>> I just reread your post to say XJ, I was thinking YJ. Here is what I
>> got:
>> http://www.quadratec.com/products/56003_03.htm
>> Other kits, just play with the last digit in the following URL's (1 to 8)
>>
>> http://www.quadratec.com/products/56003_02.htm
>> http://www.quadratec.com/products/56003_01.htm
>>
>> But I **think** the side mounts might be the same, not sure on the
>> tranny.
>> This page indicates they are the same:
>> http://www.quadratec.com/products/76057_856.htm
#57
Guest
Posts: n/a
Re: Broken Motor Mount
Some XJ's have a skid plate similar to the YJ's. It's on the 'off road skid
package'. My first XJ had it, my YJ had it, my subsequent 2 XJ's and my TJ
did not have it.
Carl
"The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
news:eookt1$ebh$1@aioe.org...
> The motor mounts are the same, the tranny mount is different. I think I
> 'could' theoretically get a crossmember from a YJ and then use the YJ
> tranny mount and also add skid protection - The stock XJ crossmember is so
> freakin' tiny.
> I think that'll have to wait, though. I'll just stick with the factory
> stuff for now.
> Thanks anyway, Roy.
>
>
> RoyJ wrote:
>> I just reread your post to say XJ, I was thinking YJ. Here is what I
>> got:
>> http://www.quadratec.com/products/56003_03.htm
>> Other kits, just play with the last digit in the following URL's (1 to 8)
>>
>> http://www.quadratec.com/products/56003_02.htm
>> http://www.quadratec.com/products/56003_01.htm
>>
>> But I **think** the side mounts might be the same, not sure on the
>> tranny.
>> This page indicates they are the same:
>> http://www.quadratec.com/products/76057_856.htm
package'. My first XJ had it, my YJ had it, my subsequent 2 XJ's and my TJ
did not have it.
Carl
"The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
news:eookt1$ebh$1@aioe.org...
> The motor mounts are the same, the tranny mount is different. I think I
> 'could' theoretically get a crossmember from a YJ and then use the YJ
> tranny mount and also add skid protection - The stock XJ crossmember is so
> freakin' tiny.
> I think that'll have to wait, though. I'll just stick with the factory
> stuff for now.
> Thanks anyway, Roy.
>
>
> RoyJ wrote:
>> I just reread your post to say XJ, I was thinking YJ. Here is what I
>> got:
>> http://www.quadratec.com/products/56003_03.htm
>> Other kits, just play with the last digit in the following URL's (1 to 8)
>>
>> http://www.quadratec.com/products/56003_02.htm
>> http://www.quadratec.com/products/56003_01.htm
>>
>> But I **think** the side mounts might be the same, not sure on the
>> tranny.
>> This page indicates they are the same:
>> http://www.quadratec.com/products/76057_856.htm
#58
Guest
Posts: n/a
Re: Broken Motor Mount
So I'm pretty sure Auto Zone gave me the wrong mounts. They're about a
half inch off. Honestly, they have the biggest @#$#ing morons working
there. I don't know how it could be any easier for them - they look up
the part on a computer, go in the back and find the part that matches.
not that hard, yet they continually screw it up.
Both mounts that were on there were broken in the same place, they
basically ripped the rubber around the bolts.
Carl wrote:
> Some XJ's have a skid plate similar to the YJ's. It's on the 'off road skid
> package'. My first XJ had it, my YJ had it, my subsequent 2 XJ's and my TJ
> did not have it.
>
> Carl
>
>
> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
> news:eookt1$ebh$1@aioe.org...
>> The motor mounts are the same, the tranny mount is different. I think I
>> 'could' theoretically get a crossmember from a YJ and then use the YJ
>> tranny mount and also add skid protection - The stock XJ crossmember is so
>> freakin' tiny.
>> I think that'll have to wait, though. I'll just stick with the factory
>> stuff for now.
>> Thanks anyway, Roy.
>>
>>
>> RoyJ wrote:
>>> I just reread your post to say XJ, I was thinking YJ. Here is what I
>>> got:
>>> http://www.quadratec.com/products/56003_03.htm
>>> Other kits, just play with the last digit in the following URL's (1 to 8)
>>>
>>> http://www.quadratec.com/products/56003_02.htm
>>> http://www.quadratec.com/products/56003_01.htm
>>>
>>> But I **think** the side mounts might be the same, not sure on the
>>> tranny.
>>> This page indicates they are the same:
>>> http://www.quadratec.com/products/76057_856.htm
>
>
--
ÐÏࡱá
half inch off. Honestly, they have the biggest @#$#ing morons working
there. I don't know how it could be any easier for them - they look up
the part on a computer, go in the back and find the part that matches.
not that hard, yet they continually screw it up.
Both mounts that were on there were broken in the same place, they
basically ripped the rubber around the bolts.
Carl wrote:
> Some XJ's have a skid plate similar to the YJ's. It's on the 'off road skid
> package'. My first XJ had it, my YJ had it, my subsequent 2 XJ's and my TJ
> did not have it.
>
> Carl
>
>
> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
> news:eookt1$ebh$1@aioe.org...
>> The motor mounts are the same, the tranny mount is different. I think I
>> 'could' theoretically get a crossmember from a YJ and then use the YJ
>> tranny mount and also add skid protection - The stock XJ crossmember is so
>> freakin' tiny.
>> I think that'll have to wait, though. I'll just stick with the factory
>> stuff for now.
>> Thanks anyway, Roy.
>>
>>
>> RoyJ wrote:
>>> I just reread your post to say XJ, I was thinking YJ. Here is what I
>>> got:
>>> http://www.quadratec.com/products/56003_03.htm
>>> Other kits, just play with the last digit in the following URL's (1 to 8)
>>>
>>> http://www.quadratec.com/products/56003_02.htm
>>> http://www.quadratec.com/products/56003_01.htm
>>>
>>> But I **think** the side mounts might be the same, not sure on the
>>> tranny.
>>> This page indicates they are the same:
>>> http://www.quadratec.com/products/76057_856.htm
>
>
--
ÐÏࡱá
#59
Guest
Posts: n/a
Re: Broken Motor Mount
So I'm pretty sure Auto Zone gave me the wrong mounts. They're about a
half inch off. Honestly, they have the biggest @#$#ing morons working
there. I don't know how it could be any easier for them - they look up
the part on a computer, go in the back and find the part that matches.
not that hard, yet they continually screw it up.
Both mounts that were on there were broken in the same place, they
basically ripped the rubber around the bolts.
Carl wrote:
> Some XJ's have a skid plate similar to the YJ's. It's on the 'off road skid
> package'. My first XJ had it, my YJ had it, my subsequent 2 XJ's and my TJ
> did not have it.
>
> Carl
>
>
> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
> news:eookt1$ebh$1@aioe.org...
>> The motor mounts are the same, the tranny mount is different. I think I
>> 'could' theoretically get a crossmember from a YJ and then use the YJ
>> tranny mount and also add skid protection - The stock XJ crossmember is so
>> freakin' tiny.
>> I think that'll have to wait, though. I'll just stick with the factory
>> stuff for now.
>> Thanks anyway, Roy.
>>
>>
>> RoyJ wrote:
>>> I just reread your post to say XJ, I was thinking YJ. Here is what I
>>> got:
>>> http://www.quadratec.com/products/56003_03.htm
>>> Other kits, just play with the last digit in the following URL's (1 to 8)
>>>
>>> http://www.quadratec.com/products/56003_02.htm
>>> http://www.quadratec.com/products/56003_01.htm
>>>
>>> But I **think** the side mounts might be the same, not sure on the
>>> tranny.
>>> This page indicates they are the same:
>>> http://www.quadratec.com/products/76057_856.htm
>
>
--
ÐÏࡱá
half inch off. Honestly, they have the biggest @#$#ing morons working
there. I don't know how it could be any easier for them - they look up
the part on a computer, go in the back and find the part that matches.
not that hard, yet they continually screw it up.
Both mounts that were on there were broken in the same place, they
basically ripped the rubber around the bolts.
Carl wrote:
> Some XJ's have a skid plate similar to the YJ's. It's on the 'off road skid
> package'. My first XJ had it, my YJ had it, my subsequent 2 XJ's and my TJ
> did not have it.
>
> Carl
>
>
> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
> news:eookt1$ebh$1@aioe.org...
>> The motor mounts are the same, the tranny mount is different. I think I
>> 'could' theoretically get a crossmember from a YJ and then use the YJ
>> tranny mount and also add skid protection - The stock XJ crossmember is so
>> freakin' tiny.
>> I think that'll have to wait, though. I'll just stick with the factory
>> stuff for now.
>> Thanks anyway, Roy.
>>
>>
>> RoyJ wrote:
>>> I just reread your post to say XJ, I was thinking YJ. Here is what I
>>> got:
>>> http://www.quadratec.com/products/56003_03.htm
>>> Other kits, just play with the last digit in the following URL's (1 to 8)
>>>
>>> http://www.quadratec.com/products/56003_02.htm
>>> http://www.quadratec.com/products/56003_01.htm
>>>
>>> But I **think** the side mounts might be the same, not sure on the
>>> tranny.
>>> This page indicates they are the same:
>>> http://www.quadratec.com/products/76057_856.htm
>
>
--
ÐÏࡱá
#60
Guest
Posts: n/a
Re: Broken Motor Mount
So I'm pretty sure Auto Zone gave me the wrong mounts. They're about a
half inch off. Honestly, they have the biggest @#$#ing morons working
there. I don't know how it could be any easier for them - they look up
the part on a computer, go in the back and find the part that matches.
not that hard, yet they continually screw it up.
Both mounts that were on there were broken in the same place, they
basically ripped the rubber around the bolts.
Carl wrote:
> Some XJ's have a skid plate similar to the YJ's. It's on the 'off road skid
> package'. My first XJ had it, my YJ had it, my subsequent 2 XJ's and my TJ
> did not have it.
>
> Carl
>
>
> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
> news:eookt1$ebh$1@aioe.org...
>> The motor mounts are the same, the tranny mount is different. I think I
>> 'could' theoretically get a crossmember from a YJ and then use the YJ
>> tranny mount and also add skid protection - The stock XJ crossmember is so
>> freakin' tiny.
>> I think that'll have to wait, though. I'll just stick with the factory
>> stuff for now.
>> Thanks anyway, Roy.
>>
>>
>> RoyJ wrote:
>>> I just reread your post to say XJ, I was thinking YJ. Here is what I
>>> got:
>>> http://www.quadratec.com/products/56003_03.htm
>>> Other kits, just play with the last digit in the following URL's (1 to 8)
>>>
>>> http://www.quadratec.com/products/56003_02.htm
>>> http://www.quadratec.com/products/56003_01.htm
>>>
>>> But I **think** the side mounts might be the same, not sure on the
>>> tranny.
>>> This page indicates they are the same:
>>> http://www.quadratec.com/products/76057_856.htm
>
>
--
ÐÏࡱá
half inch off. Honestly, they have the biggest @#$#ing morons working
there. I don't know how it could be any easier for them - they look up
the part on a computer, go in the back and find the part that matches.
not that hard, yet they continually screw it up.
Both mounts that were on there were broken in the same place, they
basically ripped the rubber around the bolts.
Carl wrote:
> Some XJ's have a skid plate similar to the YJ's. It's on the 'off road skid
> package'. My first XJ had it, my YJ had it, my subsequent 2 XJ's and my TJ
> did not have it.
>
> Carl
>
>
> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
> news:eookt1$ebh$1@aioe.org...
>> The motor mounts are the same, the tranny mount is different. I think I
>> 'could' theoretically get a crossmember from a YJ and then use the YJ
>> tranny mount and also add skid protection - The stock XJ crossmember is so
>> freakin' tiny.
>> I think that'll have to wait, though. I'll just stick with the factory
>> stuff for now.
>> Thanks anyway, Roy.
>>
>>
>> RoyJ wrote:
>>> I just reread your post to say XJ, I was thinking YJ. Here is what I
>>> got:
>>> http://www.quadratec.com/products/56003_03.htm
>>> Other kits, just play with the last digit in the following URL's (1 to 8)
>>>
>>> http://www.quadratec.com/products/56003_02.htm
>>> http://www.quadratec.com/products/56003_01.htm
>>>
>>> But I **think** the side mounts might be the same, not sure on the
>>> tranny.
>>> This page indicates they are the same:
>>> http://www.quadratec.com/products/76057_856.htm
>
>
--
ÐÏࡱá