Broke Yoke
#31
Guest
Posts: n/a
Re: Broke Yoke
I would be checking the u-joint very carefully to be sure one end isn't
missing a needle bearing or if you find crumbs of one it needs
replacing.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Ben wrote:
>
> Well.. I was using that big C-clamp thing from Harbor Freight.. Not a
> hydraulic press... But I got off the phone with OK4WD where I got the Ford
> 8.8.. They said it should have never happened.. They said it was more like
> bad casting.. They are shipping a brand new on this monday... And I will
> ship the old one back to them... If all goes well.. I will be wheeling again
> next weekend...
>
> Ben
> 95 YJ 2.5L
>
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:42608B2F.367C99C5@***.net...
> > Ditto.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Mike Romain wrote:
> >>
> >> Then that is why I prefer to tap them in with a hammer. If a needle
> >> gets down under you feel it before it blows out the end clip.
> >>
> >> Mike
missing a needle bearing or if you find crumbs of one it needs
replacing.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Ben wrote:
>
> Well.. I was using that big C-clamp thing from Harbor Freight.. Not a
> hydraulic press... But I got off the phone with OK4WD where I got the Ford
> 8.8.. They said it should have never happened.. They said it was more like
> bad casting.. They are shipping a brand new on this monday... And I will
> ship the old one back to them... If all goes well.. I will be wheeling again
> next weekend...
>
> Ben
> 95 YJ 2.5L
>
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:42608B2F.367C99C5@***.net...
> > Ditto.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Mike Romain wrote:
> >>
> >> Then that is why I prefer to tap them in with a hammer. If a needle
> >> gets down under you feel it before it blows out the end clip.
> >>
> >> Mike
#32
Guest
Posts: n/a
Re: Broke Yoke
I would be checking the u-joint very carefully to be sure one end isn't
missing a needle bearing or if you find crumbs of one it needs
replacing.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Ben wrote:
>
> Well.. I was using that big C-clamp thing from Harbor Freight.. Not a
> hydraulic press... But I got off the phone with OK4WD where I got the Ford
> 8.8.. They said it should have never happened.. They said it was more like
> bad casting.. They are shipping a brand new on this monday... And I will
> ship the old one back to them... If all goes well.. I will be wheeling again
> next weekend...
>
> Ben
> 95 YJ 2.5L
>
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:42608B2F.367C99C5@***.net...
> > Ditto.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Mike Romain wrote:
> >>
> >> Then that is why I prefer to tap them in with a hammer. If a needle
> >> gets down under you feel it before it blows out the end clip.
> >>
> >> Mike
missing a needle bearing or if you find crumbs of one it needs
replacing.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Ben wrote:
>
> Well.. I was using that big C-clamp thing from Harbor Freight.. Not a
> hydraulic press... But I got off the phone with OK4WD where I got the Ford
> 8.8.. They said it should have never happened.. They said it was more like
> bad casting.. They are shipping a brand new on this monday... And I will
> ship the old one back to them... If all goes well.. I will be wheeling again
> next weekend...
>
> Ben
> 95 YJ 2.5L
>
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:42608B2F.367C99C5@***.net...
> > Ditto.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Mike Romain wrote:
> >>
> >> Then that is why I prefer to tap them in with a hammer. If a needle
> >> gets down under you feel it before it blows out the end clip.
> >>
> >> Mike
#33
Guest
Posts: n/a
Re: Broke Yoke
I would be checking the u-joint very carefully to be sure one end isn't
missing a needle bearing or if you find crumbs of one it needs
replacing.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Ben wrote:
>
> Well.. I was using that big C-clamp thing from Harbor Freight.. Not a
> hydraulic press... But I got off the phone with OK4WD where I got the Ford
> 8.8.. They said it should have never happened.. They said it was more like
> bad casting.. They are shipping a brand new on this monday... And I will
> ship the old one back to them... If all goes well.. I will be wheeling again
> next weekend...
>
> Ben
> 95 YJ 2.5L
>
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:42608B2F.367C99C5@***.net...
> > Ditto.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Mike Romain wrote:
> >>
> >> Then that is why I prefer to tap them in with a hammer. If a needle
> >> gets down under you feel it before it blows out the end clip.
> >>
> >> Mike
missing a needle bearing or if you find crumbs of one it needs
replacing.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Ben wrote:
>
> Well.. I was using that big C-clamp thing from Harbor Freight.. Not a
> hydraulic press... But I got off the phone with OK4WD where I got the Ford
> 8.8.. They said it should have never happened.. They said it was more like
> bad casting.. They are shipping a brand new on this monday... And I will
> ship the old one back to them... If all goes well.. I will be wheeling again
> next weekend...
>
> Ben
> 95 YJ 2.5L
>
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:42608B2F.367C99C5@***.net...
> > Ditto.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Mike Romain wrote:
> >>
> >> Then that is why I prefer to tap them in with a hammer. If a needle
> >> gets down under you feel it before it blows out the end clip.
> >>
> >> Mike
#34
Guest
Posts: n/a
Re: Broke Yoke
Ditto, it's history.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> I would be checking the u-joint very carefully to be sure one end isn't
> missing a needle bearing or if you find crumbs of one it needs
> replacing.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> I would be checking the u-joint very carefully to be sure one end isn't
> missing a needle bearing or if you find crumbs of one it needs
> replacing.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
#35
Guest
Posts: n/a
Re: Broke Yoke
Ditto, it's history.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> I would be checking the u-joint very carefully to be sure one end isn't
> missing a needle bearing or if you find crumbs of one it needs
> replacing.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> I would be checking the u-joint very carefully to be sure one end isn't
> missing a needle bearing or if you find crumbs of one it needs
> replacing.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
#36
Guest
Posts: n/a
Re: Broke Yoke
Ditto, it's history.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> I would be checking the u-joint very carefully to be sure one end isn't
> missing a needle bearing or if you find crumbs of one it needs
> replacing.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> I would be checking the u-joint very carefully to be sure one end isn't
> missing a needle bearing or if you find crumbs of one it needs
> replacing.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
#37
Guest
Posts: n/a
Re: Broke Yoke
Ditto, it's history.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> I would be checking the u-joint very carefully to be sure one end isn't
> missing a needle bearing or if you find crumbs of one it needs
> replacing.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> I would be checking the u-joint very carefully to be sure one end isn't
> missing a needle bearing or if you find crumbs of one it needs
> replacing.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
#38
Guest
Posts: n/a
Re: Broke Yoke
Yeah... Good idea... I will just take it back to the parts store and get a
another one...
Ben
95 YJ 2.5L
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:426160F3.7A194B76@***.net...
> Ditto, it's history.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Mike Romain wrote:
>>
>> I would be checking the u-joint very carefully to be sure one end isn't
>> missing a needle bearing or if you find crumbs of one it needs
>> replacing.
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
another one...
Ben
95 YJ 2.5L
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:426160F3.7A194B76@***.net...
> Ditto, it's history.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Mike Romain wrote:
>>
>> I would be checking the u-joint very carefully to be sure one end isn't
>> missing a needle bearing or if you find crumbs of one it needs
>> replacing.
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
#39
Guest
Posts: n/a
Re: Broke Yoke
Yeah... Good idea... I will just take it back to the parts store and get a
another one...
Ben
95 YJ 2.5L
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:426160F3.7A194B76@***.net...
> Ditto, it's history.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Mike Romain wrote:
>>
>> I would be checking the u-joint very carefully to be sure one end isn't
>> missing a needle bearing or if you find crumbs of one it needs
>> replacing.
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
another one...
Ben
95 YJ 2.5L
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:426160F3.7A194B76@***.net...
> Ditto, it's history.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Mike Romain wrote:
>>
>> I would be checking the u-joint very carefully to be sure one end isn't
>> missing a needle bearing or if you find crumbs of one it needs
>> replacing.
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
#40
Guest
Posts: n/a
Re: Broke Yoke
Yeah... Good idea... I will just take it back to the parts store and get a
another one...
Ben
95 YJ 2.5L
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:426160F3.7A194B76@***.net...
> Ditto, it's history.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Mike Romain wrote:
>>
>> I would be checking the u-joint very carefully to be sure one end isn't
>> missing a needle bearing or if you find crumbs of one it needs
>> replacing.
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
another one...
Ben
95 YJ 2.5L
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:426160F3.7A194B76@***.net...
> Ditto, it's history.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Mike Romain wrote:
>>
>> I would be checking the u-joint very carefully to be sure one end isn't
>> missing a needle bearing or if you find crumbs of one it needs
>> replacing.
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's