Brake Light Problem on 2000 JGC
04-27-2005, 07:48 PM
#31
Guest
Posts: n/a
Re: The Fix, Been There
Heck yeah. Doesn't seem like it would be too difficult to just take the
internals of a trailer tailight and install the bulb holder from that into
the GC taillight assembly.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:427015FA.91E91427@***.net...
> For a hundred and fifty bucks, I could do a lot of revamping.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Mindy wrote:
>>
>> Buy a new back light assembly for the side that is giving problems for
>> 150
>> dollars and your problem is solved or better yet try the junk yard.....It
>> is
>> the bulb holders piece that has gotten hot and melted and preventing good
>> contact.....you cant and I repeat cant buy the bulb holder assembly by
>> itself even though it has screws to remove just that part that is causing
>> the trouble.....I was denied warranty due to it being apart of a cosmetic
>> part......trust me, I know, I have battled this problem.....good
>> luck...quick way to test is switch assemblies from the good side and you
>> will see problem solved......
internals of a trailer tailight and install the bulb holder from that into
the GC taillight assembly.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:427015FA.91E91427@***.net...
> For a hundred and fifty bucks, I could do a lot of revamping.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Mindy wrote:
>>
>> Buy a new back light assembly for the side that is giving problems for
>> 150
>> dollars and your problem is solved or better yet try the junk yard.....It
>> is
>> the bulb holders piece that has gotten hot and melted and preventing good
>> contact.....you cant and I repeat cant buy the bulb holder assembly by
>> itself even though it has screws to remove just that part that is causing
>> the trouble.....I was denied warranty due to it being apart of a cosmetic
>> part......trust me, I know, I have battled this problem.....good
>> luck...quick way to test is switch assemblies from the good side and you
>> will see problem solved......
04-27-2005, 07:48 PM
#32
Guest
Posts: n/a
Re: The Fix, Been There
Heck yeah. Doesn't seem like it would be too difficult to just take the
internals of a trailer tailight and install the bulb holder from that into
the GC taillight assembly.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:427015FA.91E91427@***.net...
> For a hundred and fifty bucks, I could do a lot of revamping.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Mindy wrote:
>>
>> Buy a new back light assembly for the side that is giving problems for
>> 150
>> dollars and your problem is solved or better yet try the junk yard.....It
>> is
>> the bulb holders piece that has gotten hot and melted and preventing good
>> contact.....you cant and I repeat cant buy the bulb holder assembly by
>> itself even though it has screws to remove just that part that is causing
>> the trouble.....I was denied warranty due to it being apart of a cosmetic
>> part......trust me, I know, I have battled this problem.....good
>> luck...quick way to test is switch assemblies from the good side and you
>> will see problem solved......
internals of a trailer tailight and install the bulb holder from that into
the GC taillight assembly.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:427015FA.91E91427@***.net...
> For a hundred and fifty bucks, I could do a lot of revamping.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Mindy wrote:
>>
>> Buy a new back light assembly for the side that is giving problems for
>> 150
>> dollars and your problem is solved or better yet try the junk yard.....It
>> is
>> the bulb holders piece that has gotten hot and melted and preventing good
>> contact.....you cant and I repeat cant buy the bulb holder assembly by
>> itself even though it has screws to remove just that part that is causing
>> the trouble.....I was denied warranty due to it being apart of a cosmetic
>> part......trust me, I know, I have battled this problem.....good
>> luck...quick way to test is switch assemblies from the good side and you
>> will see problem solved......
04-27-2005, 07:48 PM
#33
Guest
Posts: n/a
Re: The Fix, Been There
Heck yeah. Doesn't seem like it would be too difficult to just take the
internals of a trailer tailight and install the bulb holder from that into
the GC taillight assembly.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:427015FA.91E91427@***.net...
> For a hundred and fifty bucks, I could do a lot of revamping.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Mindy wrote:
>>
>> Buy a new back light assembly for the side that is giving problems for
>> 150
>> dollars and your problem is solved or better yet try the junk yard.....It
>> is
>> the bulb holders piece that has gotten hot and melted and preventing good
>> contact.....you cant and I repeat cant buy the bulb holder assembly by
>> itself even though it has screws to remove just that part that is causing
>> the trouble.....I was denied warranty due to it being apart of a cosmetic
>> part......trust me, I know, I have battled this problem.....good
>> luck...quick way to test is switch assemblies from the good side and you
>> will see problem solved......
internals of a trailer tailight and install the bulb holder from that into
the GC taillight assembly.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:427015FA.91E91427@***.net...
> For a hundred and fifty bucks, I could do a lot of revamping.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Mindy wrote:
>>
>> Buy a new back light assembly for the side that is giving problems for
>> 150
>> dollars and your problem is solved or better yet try the junk yard.....It
>> is
>> the bulb holders piece that has gotten hot and melted and preventing good
>> contact.....you cant and I repeat cant buy the bulb holder assembly by
>> itself even though it has screws to remove just that part that is causing
>> the trouble.....I was denied warranty due to it being apart of a cosmetic
>> part......trust me, I know, I have battled this problem.....good
>> luck...quick way to test is switch assemblies from the good side and you
>> will see problem solved......
04-27-2005, 08:59 PM
#34
Guest
Posts: n/a
Re: The Fix, Been There
And driving sixty, fifty, and thirty year old cars, I'm forced to
do it all the time.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Matt Macchiarolo wrote:
>
> Heck yeah. Doesn't seem like it would be too difficult to just take the
> internals of a trailer tailight and install the bulb holder from that into
> the GC taillight assembly.
do it all the time.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Matt Macchiarolo wrote:
>
> Heck yeah. Doesn't seem like it would be too difficult to just take the
> internals of a trailer tailight and install the bulb holder from that into
> the GC taillight assembly.
04-27-2005, 08:59 PM
#35
Guest
Posts: n/a
Re: The Fix, Been There
And driving sixty, fifty, and thirty year old cars, I'm forced to
do it all the time.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Matt Macchiarolo wrote:
>
> Heck yeah. Doesn't seem like it would be too difficult to just take the
> internals of a trailer tailight and install the bulb holder from that into
> the GC taillight assembly.
do it all the time.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Matt Macchiarolo wrote:
>
> Heck yeah. Doesn't seem like it would be too difficult to just take the
> internals of a trailer tailight and install the bulb holder from that into
> the GC taillight assembly.
04-27-2005, 08:59 PM
#36
Guest
Posts: n/a
Re: The Fix, Been There
And driving sixty, fifty, and thirty year old cars, I'm forced to
do it all the time.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Matt Macchiarolo wrote:
>
> Heck yeah. Doesn't seem like it would be too difficult to just take the
> internals of a trailer tailight and install the bulb holder from that into
> the GC taillight assembly.
do it all the time.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Matt Macchiarolo wrote:
>
> Heck yeah. Doesn't seem like it would be too difficult to just take the
> internals of a trailer tailight and install the bulb holder from that into
> the GC taillight assembly.
04-27-2005, 08:59 PM
#37
Guest
Posts: n/a
Re: The Fix, Been There
And driving sixty, fifty, and thirty year old cars, I'm forced to
do it all the time.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Matt Macchiarolo wrote:
>
> Heck yeah. Doesn't seem like it would be too difficult to just take the
> internals of a trailer tailight and install the bulb holder from that into
> the GC taillight assembly.
do it all the time.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Matt Macchiarolo wrote:
>
> Heck yeah. Doesn't seem like it would be too difficult to just take the
> internals of a trailer tailight and install the bulb holder from that into
> the GC taillight assembly.
04-28-2005, 09:12 AM
#38
Guest
Posts: n/a
Re: The Fix, Been There
You 'can' buy replacement pigtails that you can put in. I used them in
all my light fixtures when I rebuilt my CJ7. They are inexpensive
unfortunately, I would have preferred higher quality parts, but 5 years
later they all are still working.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Matt Macchiarolo wrote:
>
> Heck yeah. Doesn't seem like it would be too difficult to just take the
> internals of a trailer tailight and install the bulb holder from that into
> the GC taillight assembly.
>
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:427015FA.91E91427@***.net...
> > For a hundred and fifty bucks, I could do a lot of revamping.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Mindy wrote:
> >>
> >> Buy a new back light assembly for the side that is giving problems for
> >> 150
> >> dollars and your problem is solved or better yet try the junk yard.....It
> >> is
> >> the bulb holders piece that has gotten hot and melted and preventing good
> >> contact.....you cant and I repeat cant buy the bulb holder assembly by
> >> itself even though it has screws to remove just that part that is causing
> >> the trouble.....I was denied warranty due to it being apart of a cosmetic
> >> part......trust me, I know, I have battled this problem.....good
> >> luck...quick way to test is switch assemblies from the good side and you
> >> will see problem solved......
all my light fixtures when I rebuilt my CJ7. They are inexpensive
unfortunately, I would have preferred higher quality parts, but 5 years
later they all are still working.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Matt Macchiarolo wrote:
>
> Heck yeah. Doesn't seem like it would be too difficult to just take the
> internals of a trailer tailight and install the bulb holder from that into
> the GC taillight assembly.
>
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:427015FA.91E91427@***.net...
> > For a hundred and fifty bucks, I could do a lot of revamping.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Mindy wrote:
> >>
> >> Buy a new back light assembly for the side that is giving problems for
> >> 150
> >> dollars and your problem is solved or better yet try the junk yard.....It
> >> is
> >> the bulb holders piece that has gotten hot and melted and preventing good
> >> contact.....you cant and I repeat cant buy the bulb holder assembly by
> >> itself even though it has screws to remove just that part that is causing
> >> the trouble.....I was denied warranty due to it being apart of a cosmetic
> >> part......trust me, I know, I have battled this problem.....good
> >> luck...quick way to test is switch assemblies from the good side and you
> >> will see problem solved......
04-28-2005, 09:12 AM
#39
Guest
Posts: n/a
Re: The Fix, Been There
You 'can' buy replacement pigtails that you can put in. I used them in
all my light fixtures when I rebuilt my CJ7. They are inexpensive
unfortunately, I would have preferred higher quality parts, but 5 years
later they all are still working.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Matt Macchiarolo wrote:
>
> Heck yeah. Doesn't seem like it would be too difficult to just take the
> internals of a trailer tailight and install the bulb holder from that into
> the GC taillight assembly.
>
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:427015FA.91E91427@***.net...
> > For a hundred and fifty bucks, I could do a lot of revamping.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Mindy wrote:
> >>
> >> Buy a new back light assembly for the side that is giving problems for
> >> 150
> >> dollars and your problem is solved or better yet try the junk yard.....It
> >> is
> >> the bulb holders piece that has gotten hot and melted and preventing good
> >> contact.....you cant and I repeat cant buy the bulb holder assembly by
> >> itself even though it has screws to remove just that part that is causing
> >> the trouble.....I was denied warranty due to it being apart of a cosmetic
> >> part......trust me, I know, I have battled this problem.....good
> >> luck...quick way to test is switch assemblies from the good side and you
> >> will see problem solved......
all my light fixtures when I rebuilt my CJ7. They are inexpensive
unfortunately, I would have preferred higher quality parts, but 5 years
later they all are still working.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Matt Macchiarolo wrote:
>
> Heck yeah. Doesn't seem like it would be too difficult to just take the
> internals of a trailer tailight and install the bulb holder from that into
> the GC taillight assembly.
>
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:427015FA.91E91427@***.net...
> > For a hundred and fifty bucks, I could do a lot of revamping.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Mindy wrote:
> >>
> >> Buy a new back light assembly for the side that is giving problems for
> >> 150
> >> dollars and your problem is solved or better yet try the junk yard.....It
> >> is
> >> the bulb holders piece that has gotten hot and melted and preventing good
> >> contact.....you cant and I repeat cant buy the bulb holder assembly by
> >> itself even though it has screws to remove just that part that is causing
> >> the trouble.....I was denied warranty due to it being apart of a cosmetic
> >> part......trust me, I know, I have battled this problem.....good
> >> luck...quick way to test is switch assemblies from the good side and you
> >> will see problem solved......
04-28-2005, 09:12 AM
#40
Guest
Posts: n/a
Re: The Fix, Been There
You 'can' buy replacement pigtails that you can put in. I used them in
all my light fixtures when I rebuilt my CJ7. They are inexpensive
unfortunately, I would have preferred higher quality parts, but 5 years
later they all are still working.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Matt Macchiarolo wrote:
>
> Heck yeah. Doesn't seem like it would be too difficult to just take the
> internals of a trailer tailight and install the bulb holder from that into
> the GC taillight assembly.
>
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:427015FA.91E91427@***.net...
> > For a hundred and fifty bucks, I could do a lot of revamping.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Mindy wrote:
> >>
> >> Buy a new back light assembly for the side that is giving problems for
> >> 150
> >> dollars and your problem is solved or better yet try the junk yard.....It
> >> is
> >> the bulb holders piece that has gotten hot and melted and preventing good
> >> contact.....you cant and I repeat cant buy the bulb holder assembly by
> >> itself even though it has screws to remove just that part that is causing
> >> the trouble.....I was denied warranty due to it being apart of a cosmetic
> >> part......trust me, I know, I have battled this problem.....good
> >> luck...quick way to test is switch assemblies from the good side and you
> >> will see problem solved......
all my light fixtures when I rebuilt my CJ7. They are inexpensive
unfortunately, I would have preferred higher quality parts, but 5 years
later they all are still working.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Matt Macchiarolo wrote:
>
> Heck yeah. Doesn't seem like it would be too difficult to just take the
> internals of a trailer tailight and install the bulb holder from that into
> the GC taillight assembly.
>
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:427015FA.91E91427@***.net...
> > For a hundred and fifty bucks, I could do a lot of revamping.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Mindy wrote:
> >>
> >> Buy a new back light assembly for the side that is giving problems for
> >> 150
> >> dollars and your problem is solved or better yet try the junk yard.....It
> >> is
> >> the bulb holders piece that has gotten hot and melted and preventing good
> >> contact.....you cant and I repeat cant buy the bulb holder assembly by
> >> itself even though it has screws to remove just that part that is causing
> >> the trouble.....I was denied warranty due to it being apart of a cosmetic
> >> part......trust me, I know, I have battled this problem.....good
> >> luck...quick way to test is switch assemblies from the good side and you
> >> will see problem solved......
