Bored throttle body
#1
Guest
Posts: n/a
Bored throttle body
Hey all,
I'm going to be boring my throttle body to 62mm. I have a source for a
butterfly and a throttle plate so that's not a concern. My question:
Am I going to need a MAP sensor upgrade or anything? Anything obvious that
I'm not thinking of?
Thanks,
n.
I'm going to be boring my throttle body to 62mm. I have a source for a
butterfly and a throttle plate so that's not a concern. My question:
Am I going to need a MAP sensor upgrade or anything? Anything obvious that
I'm not thinking of?
Thanks,
n.
#2
Guest
Posts: n/a
Re: Bored throttle body
2003 TJ, I-6. For what it's worth
n.
"Nathan Otis" <na@spam.smeat.net> wrote in message
news:oLU%b.32698$AL.675692@attbi_s03...
> Hey all,
>
> I'm going to be boring my throttle body to 62mm. I have a source for a
> butterfly and a throttle plate so that's not a concern. My question:
>
> Am I going to need a MAP sensor upgrade or anything? Anything obvious that
> I'm not thinking of?
>
> Thanks,
> n.
>
>
n.
"Nathan Otis" <na@spam.smeat.net> wrote in message
news:oLU%b.32698$AL.675692@attbi_s03...
> Hey all,
>
> I'm going to be boring my throttle body to 62mm. I have a source for a
> butterfly and a throttle plate so that's not a concern. My question:
>
> Am I going to need a MAP sensor upgrade or anything? Anything obvious that
> I'm not thinking of?
>
> Thanks,
> n.
>
>
#3
Guest
Posts: n/a
Re: Bored throttle body
2003 TJ, I-6. For what it's worth
n.
"Nathan Otis" <na@spam.smeat.net> wrote in message
news:oLU%b.32698$AL.675692@attbi_s03...
> Hey all,
>
> I'm going to be boring my throttle body to 62mm. I have a source for a
> butterfly and a throttle plate so that's not a concern. My question:
>
> Am I going to need a MAP sensor upgrade or anything? Anything obvious that
> I'm not thinking of?
>
> Thanks,
> n.
>
>
n.
"Nathan Otis" <na@spam.smeat.net> wrote in message
news:oLU%b.32698$AL.675692@attbi_s03...
> Hey all,
>
> I'm going to be boring my throttle body to 62mm. I have a source for a
> butterfly and a throttle plate so that's not a concern. My question:
>
> Am I going to need a MAP sensor upgrade or anything? Anything obvious that
> I'm not thinking of?
>
> Thanks,
> n.
>
>
#4
Guest
Posts: n/a
Re: Bored throttle body
2003 TJ, I-6. For what it's worth
n.
"Nathan Otis" <na@spam.smeat.net> wrote in message
news:oLU%b.32698$AL.675692@attbi_s03...
> Hey all,
>
> I'm going to be boring my throttle body to 62mm. I have a source for a
> butterfly and a throttle plate so that's not a concern. My question:
>
> Am I going to need a MAP sensor upgrade or anything? Anything obvious that
> I'm not thinking of?
>
> Thanks,
> n.
>
>
n.
"Nathan Otis" <na@spam.smeat.net> wrote in message
news:oLU%b.32698$AL.675692@attbi_s03...
> Hey all,
>
> I'm going to be boring my throttle body to 62mm. I have a source for a
> butterfly and a throttle plate so that's not a concern. My question:
>
> Am I going to need a MAP sensor upgrade or anything? Anything obvious that
> I'm not thinking of?
>
> Thanks,
> n.
>
>
#5
Guest
Posts: n/a
Re: Bored throttle body
Nathan Otis did pass the time by typing:
> "Nathan Otis" wrote...
>> Hey all,
>>
>> I'm going to be boring my throttle body to 62mm. I have a source for a
>> butterfly and a throttle plate so that's not a concern. My question:
>>
>> Am I going to need a MAP sensor upgrade or anything? Anything obvious that
>> I'm not thinking of?
> 2003 TJ, I-6. For what it's worth
Nope, you should be fine.
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> "Nathan Otis" wrote...
>> Hey all,
>>
>> I'm going to be boring my throttle body to 62mm. I have a source for a
>> butterfly and a throttle plate so that's not a concern. My question:
>>
>> Am I going to need a MAP sensor upgrade or anything? Anything obvious that
>> I'm not thinking of?
> 2003 TJ, I-6. For what it's worth
Nope, you should be fine.
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
#6
Guest
Posts: n/a
Re: Bored throttle body
Nathan Otis did pass the time by typing:
> "Nathan Otis" wrote...
>> Hey all,
>>
>> I'm going to be boring my throttle body to 62mm. I have a source for a
>> butterfly and a throttle plate so that's not a concern. My question:
>>
>> Am I going to need a MAP sensor upgrade or anything? Anything obvious that
>> I'm not thinking of?
> 2003 TJ, I-6. For what it's worth
Nope, you should be fine.
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> "Nathan Otis" wrote...
>> Hey all,
>>
>> I'm going to be boring my throttle body to 62mm. I have a source for a
>> butterfly and a throttle plate so that's not a concern. My question:
>>
>> Am I going to need a MAP sensor upgrade or anything? Anything obvious that
>> I'm not thinking of?
> 2003 TJ, I-6. For what it's worth
Nope, you should be fine.
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
#7
Guest
Posts: n/a
Re: Bored throttle body
Nathan Otis did pass the time by typing:
> "Nathan Otis" wrote...
>> Hey all,
>>
>> I'm going to be boring my throttle body to 62mm. I have a source for a
>> butterfly and a throttle plate so that's not a concern. My question:
>>
>> Am I going to need a MAP sensor upgrade or anything? Anything obvious that
>> I'm not thinking of?
> 2003 TJ, I-6. For what it's worth
Nope, you should be fine.
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> "Nathan Otis" wrote...
>> Hey all,
>>
>> I'm going to be boring my throttle body to 62mm. I have a source for a
>> butterfly and a throttle plate so that's not a concern. My question:
>>
>> Am I going to need a MAP sensor upgrade or anything? Anything obvious that
>> I'm not thinking of?
> 2003 TJ, I-6. For what it's worth
Nope, you should be fine.
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
#8
Guest
Posts: n/a
Re: Bored throttle body
don't forget the pictures........
--
Carlo F. Serusa, Jr. RPh
carlo.jr at comcast DOTnet
'98 Sahara TJ - '89 YJ - '79 Scout II
O|||||||O
'92 Explorer '65 Mustang
"DougW" <post.replies@invalid.address> wrote in message
news:6KV%b.14733$1k.12770@okepread01...
> Nathan Otis did pass the time by typing:
> > "Nathan Otis" wrote...
> >> Hey all,
> >>
> >> I'm going to be boring my throttle body to 62mm. I have a source for a
> >> butterfly and a throttle plate so that's not a concern. My question:
> >>
> >> Am I going to need a MAP sensor upgrade or anything? Anything obvious
that
> >> I'm not thinking of?
>
> > 2003 TJ, I-6. For what it's worth
>
> Nope, you should be fine.
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
>
>
--
Carlo F. Serusa, Jr. RPh
carlo.jr at comcast DOTnet
'98 Sahara TJ - '89 YJ - '79 Scout II
O|||||||O
'92 Explorer '65 Mustang
"DougW" <post.replies@invalid.address> wrote in message
news:6KV%b.14733$1k.12770@okepread01...
> Nathan Otis did pass the time by typing:
> > "Nathan Otis" wrote...
> >> Hey all,
> >>
> >> I'm going to be boring my throttle body to 62mm. I have a source for a
> >> butterfly and a throttle plate so that's not a concern. My question:
> >>
> >> Am I going to need a MAP sensor upgrade or anything? Anything obvious
that
> >> I'm not thinking of?
>
> > 2003 TJ, I-6. For what it's worth
>
> Nope, you should be fine.
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
>
>
#9
Guest
Posts: n/a
Re: Bored throttle body
don't forget the pictures........
--
Carlo F. Serusa, Jr. RPh
carlo.jr at comcast DOTnet
'98 Sahara TJ - '89 YJ - '79 Scout II
O|||||||O
'92 Explorer '65 Mustang
"DougW" <post.replies@invalid.address> wrote in message
news:6KV%b.14733$1k.12770@okepread01...
> Nathan Otis did pass the time by typing:
> > "Nathan Otis" wrote...
> >> Hey all,
> >>
> >> I'm going to be boring my throttle body to 62mm. I have a source for a
> >> butterfly and a throttle plate so that's not a concern. My question:
> >>
> >> Am I going to need a MAP sensor upgrade or anything? Anything obvious
that
> >> I'm not thinking of?
>
> > 2003 TJ, I-6. For what it's worth
>
> Nope, you should be fine.
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
>
>
--
Carlo F. Serusa, Jr. RPh
carlo.jr at comcast DOTnet
'98 Sahara TJ - '89 YJ - '79 Scout II
O|||||||O
'92 Explorer '65 Mustang
"DougW" <post.replies@invalid.address> wrote in message
news:6KV%b.14733$1k.12770@okepread01...
> Nathan Otis did pass the time by typing:
> > "Nathan Otis" wrote...
> >> Hey all,
> >>
> >> I'm going to be boring my throttle body to 62mm. I have a source for a
> >> butterfly and a throttle plate so that's not a concern. My question:
> >>
> >> Am I going to need a MAP sensor upgrade or anything? Anything obvious
that
> >> I'm not thinking of?
>
> > 2003 TJ, I-6. For what it's worth
>
> Nope, you should be fine.
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
>
>
#10
Guest
Posts: n/a
Re: Bored throttle body
don't forget the pictures........
--
Carlo F. Serusa, Jr. RPh
carlo.jr at comcast DOTnet
'98 Sahara TJ - '89 YJ - '79 Scout II
O|||||||O
'92 Explorer '65 Mustang
"DougW" <post.replies@invalid.address> wrote in message
news:6KV%b.14733$1k.12770@okepread01...
> Nathan Otis did pass the time by typing:
> > "Nathan Otis" wrote...
> >> Hey all,
> >>
> >> I'm going to be boring my throttle body to 62mm. I have a source for a
> >> butterfly and a throttle plate so that's not a concern. My question:
> >>
> >> Am I going to need a MAP sensor upgrade or anything? Anything obvious
that
> >> I'm not thinking of?
>
> > 2003 TJ, I-6. For what it's worth
>
> Nope, you should be fine.
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
>
>
--
Carlo F. Serusa, Jr. RPh
carlo.jr at comcast DOTnet
'98 Sahara TJ - '89 YJ - '79 Scout II
O|||||||O
'92 Explorer '65 Mustang
"DougW" <post.replies@invalid.address> wrote in message
news:6KV%b.14733$1k.12770@okepread01...
> Nathan Otis did pass the time by typing:
> > "Nathan Otis" wrote...
> >> Hey all,
> >>
> >> I'm going to be boring my throttle body to 62mm. I have a source for a
> >> butterfly and a throttle plate so that's not a concern. My question:
> >>
> >> Am I going to need a MAP sensor upgrade or anything? Anything obvious
that
> >> I'm not thinking of?
>
> > 2003 TJ, I-6. For what it's worth
>
> Nope, you should be fine.
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
>
>